- 09 10月, 2008 1 次提交
-
-
由 Jens Axboe 提交于
Right now SCSI and others do their own command timeout handling. Move those bits to the block layer. Instead of having a timer per command, we try to be a bit more clever and simply have one per-queue. This avoids the overhead of having to tear down and setup a timer for each command, so it will result in a lot less timer fiddling. Signed-off-by: NMike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 08 4月, 2008 1 次提交
-
-
由 Jeff Garzik 提交于
- Reduce uses of gdth_pci_str::pdev, preferring a local variable (or function arg) 'pdev' instead. - Reduce uses of gdth_pcistr array, preferring local variable (or function arg) 'pcistr' instead. - Eliminate lone use of gdth_pci_str::irq, using equivalent pdev->irq instead - Eliminate assign-only gdth_pci_str::io_mm Note: If the indentation seems weird, that's because a line was converted from spaces to tabs, when it was modified. Signed-off-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 28 2月, 2008 1 次提交
-
-
由 Boaz Harrosh 提交于
The recent patch named: [SCSI] gdth: !use_sg cleanup and use of scsi accessors has done a bad job in handling internal commands issued by gdth_execute(). Internal commands are issued with device gdth_cmd_str ready made directly to the card, without any mapping or translations of scsi commands. So here I added a gdth_cmd_str pointer to the gdth_cmndinfo private structure which is then copied directly to host. following this patch is a cleanup that removes the home cooked accessors and reverts them to regular scsi_cmnd accessors. Since they are not used anymore. After review maybe the 2 patches should be squashed together. FIXME: There is still a problem with gdth_get_info(). as reported there is a WARN_ON trigerd in dma_free_coherent() when doing: $ cat /proc/sys/gdth/0 Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Tested-by: NJoerg Dorchain: <joerg@dorchain.net> Tested-by: NStefan Priebe <s.priebe@allied-internet.ag> Tested-by: NJon Chelton <jchelton@ffpglobal.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 13 10月, 2007 6 次提交
-
-
由 Boaz Harrosh 提交于
gdth_execute() will issue an internal, none scsi-standard commands onto __gdth_queuecommand(). Since it is not recommended to set struct scsi_cmnd IO members in llds, gdth now uses internal IO members for IO. In the case of gdth_execute() these members will be set properly. In case the command was issued from scsi-ml (by gdth_queuecommand) they will be set from scsi IO accessors. * define gdth IO accessors and use them throughout the driver. * use an sg-of-one in gdth_execute() and fix gdth_special_cmd() accordingly. * Clean the not use_sg code path and company Signed-off-by Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Boaz Harrosh 提交于
- Cleanup the rest of the scsi_cmnd->SCp members and move them to gdth_cmndinfo: SCp.this_residual => priority SCp.buffers_residual => timeout SCp.Status => status and dma_dir SCp.Message => info SCp.have_data_in => volatile wait_for_completion SCp.sent_command => OpCode SCp.phase => phase - Two more members will be naturally removed in the !use_sg cleanup TODO: What is the meaning of gdth_cmndinfo.phase? (rhetorically) Signed-off-by Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Boaz Harrosh 提交于
- scsi_cmnd and specifically ->SCp of, where heavily abused with internal meaning members and flags. So introduce a new struct gdth_cmndinfo, put it on ->host_scribble and define a gdth_cmnd_priv() accessor to retrieve it from a scsi_cmnd. - The structure now holds two members: internal_command - replaces the IS_GDTH_INTERNAL_CMD() croft. sense_paddr - which was a 64-bit spanning on 2 32-bit members of SCp. More overloaded members from SCp and scsi_cmnd will be moved in a later patch (For easy review). - Split up gdth_queuecommand to an additional internal_function. The later is the one called by gdth_execute(). This will be more evident later in the scsi accessors patch, but it also facilitates in the differentiation between internal_command and external. And the setup of gdth_cmndinfo of each command. Signed-off-by Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Christoph Hellwig 提交于
- Use scsi_add_host and friends and track instances ourselves. And generally modernize the driver's structure. - TODO: Next we can remove the controller table - TODO: Fix use of deprecated pci_find_device() Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Boaz Harrosh 提交于
- Based on same patch from Christoph Hellwig <hch@lst.de> - Get rid of all the indirection in the Scsi_Host private data and always put the gdth_ha_str directly into it. - Change all internal functions prototype to recieve an "gdth_ha_str *ha" pointer directlly and kill all that redundent access to the "gdth_ctr_tab[]" controller-table. Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Jeff Garzik 提交于
* Remove in-source changelog. It's archived permanently in git and various kernel archives, and changelogs should exist purely in git. * Remove 2.4.x kernel support. It is an active obstacle to modernizing this driver, at this point. This includes killing gdth_kcompat.h which is 100% redundant in modern kernels. Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 31 7月, 2007 1 次提交
-
-
由 Jeff Garzik 提交于
This patch * removes struct members that duplicate pci_dev members * replaces ha->stype usage with ha->pdev->device usage where feasible Signed-off-by: NJeff Garzik <jeff@garzik.org> Acked-by: NChristoph Hellwig <hch@lst.de> Acked-by: NAchim Leubner <Achim_Leubner@adaptec.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 27 9月, 2006 1 次提交
-
-
由 Michal Piotrowski 提交于
Signed-off-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 10 6月, 2006 1 次提交
-
-
由 Leubner, Achim 提交于
Initial pass at converting the gdth driver away from the scsi_request interface so that the request interface can be removed post 2.6.18 without breaking gdth. Based on changes from Christoph Hellwig <hch@lst.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 10 11月, 2005 1 次提交
-
-
由 Christoph Hellwig 提交于
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 19 4月, 2005 1 次提交
-
-
This patch contains the following cleanups: - make some needlessly global functions static - remove one more kernel 2.2 #ifdef Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-