This patch adds changes to setup the Recon3D's mixer controls.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds commands to the alternative input and output select
commands to support the Recon3D.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The Recon3D can use many of the same functions as the Recon3Di, so many
of the r3di prefix function remain the same, but change their names to
the more generic r3d prefix. This patch does this, and adds quirk checks
for things specific to the Recon3Di.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds functions for Recon3D startup, and sets values for
things such as use_pci_mmio. It also renames some functions and tables
from the sbz prefix into ca0132, as the Recon3D uses them as well.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds the ability to choose whether or not to map the pci
region2, which is used for things such as GPIO on the Recon3D and Sound
Blaster Z.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds pin configs from the Recon3D, taken from the Window's
driver.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds the PCI subsys ID for the Recon3D that has been tested,
and adds the QUIRK_R3D enumeration.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch fixes a previous oversight where the microphone unsolicited
response would use the wrong input selection function.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch cleans up ca0132_init by removing unnecessary commands and
ordering things better.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds a new function, ca0132_mmio_gpio_set, to clear up what
is going on with writes to mmio region 0x320.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Variable cfg_val is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
warning: variable 'cfg_val' set but not used [-Wunused-but-set-variable]

[ Background info about val_bit field from alsa-devel ML thread:
 tiwai: Actually this made me wonder what is the definition of val_bit.
	It seems always 1 in the current code after the commit
	964ca808. Pierre?
 pbossart: This val_bit is only there for debug/test, it should be set
	to one by default and has nothing to do with the lpcm_id.
	This variable was set even in patches before upstream
	submission and was never needed, I guess it must be a 9-yr
	old issue. Good catch!
]
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 115156 ("Missing break in switch")
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Notice that in this particular case, I replaced the code comment with
a proper "fall through" annotation, which is what GCC is expecting
to find.
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This device has the same issues as the HP x360 wrt the MUTE LED and
the front speakers not working. This patch fixes the MUTE LED issue,
but doesn't touch the HDA verbs. The fix for the x360 does not work
on the Spectre.
Signed-off-by: NAlexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Warning level 2 was used: -Wimplicit-fallthrough=2
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Notice that in this particular case, I replaced the code comment with
a proper "fall through" annotation, which is what GCC is expecting
to find.
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

For a sake of code simplification, remove the init and the exit
entries that do nothing.

Notes for readers: actually it's OK to remove *both* init and exit,
but not OK to remove the exit entry.  By removing only the exit while
keeping init, the module becomes permanently loaded; i.e. you cannot
unload it any longer!
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

For a sake of code simplification, remove the init and the exit
entries that do nothing.

Notes for readers: actually it's OK to remove *both* init and exit,
but not OK to remove the exit entry.  By removing only the exit while
keeping init, the module becomes permanently loaded; i.e. you cannot
unload it any longer!
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

For a sake of code simplification, remove the init and the exit
entries that do nothing.

Notes for readers: actually it's OK to remove *both* init and exit,
but not OK to remove the exit entry.  By removing only the exit while
keeping init, the module becomes permanently loaded; i.e. you cannot
unload it any longer!
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

For a sake of code simplification, remove the init and the exit
entries that do nothing.

Notes for readers: actually it's OK to remove *both* init and exit,
but not OK to remove the exit entry.  By removing only the exit while
keeping init, the module becomes permanently loaded; i.e. you cannot
unload it any longer!
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

For a sake of code simplification, remove the init and the exit
entries that do nothing.

Notes for readers: actually it's OK to remove *both* init and exit,
but not OK to remove the exit entry.  By removing only the exit while
keeping init, the module becomes permanently loaded; i.e. you cannot
unload it any longer!
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

For a sake of code simplification, remove the init and the exit
entries that do nothing.

Notes for readers: actually it's OK to remove *both* init and exit,
but not OK to remove the exit entry.  By removing only the exit while
keeping init, the module becomes permanently loaded; i.e. you cannot
unload it any longer!
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Trivial spelling mistake fix in debug message
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 115075 ("Missing break in switch")
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 402016 ("Missing break in switch")
Addresses-Coverity-ID: 1056542 ("Missing break in switch")
Addresses-Coverity-ID: 1339579 ("Missing break in switch")
Addresses-Coverity-ID: 1369526 ("Missing break in switch")
Addresses-Coverity-ID: 1369529 ("Missing break in switch")
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 1165394 ("Missing break in switch")
Addresses-Coverity-ID: 1167851 ("Missing break in switch")
Addresses-Coverity-ID: 402015 ("Missing break in switch")
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 1468367 ("Missing break in switch")
Addresses-Coverity-ID: 115037 ("Missing break in switch")
Addresses-Coverity-ID: 115038 ("Missing break in switch")
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

There was a typo of COPY_USER in the dead code (that is disabled
as default).

Fixes: 4b83eff8 ("ALSA: sb: Convert to the new PCM ops")
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

sizeof() when applied to a pointer typed expression gives the
size of the pointer, not that of the pointed data.

Fixes: 7edf3b5e ("ALSA: usb-audio: AudioStreaming Power Domain parsing")
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The old ugly macros remained in the code without usage.
Rip them off.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

All usages of mutex in ALSA sequencer core would take too long, hence
we don't have to care about the user interruption that makes things
complicated.  Let's replace them with simpler mutex_lock().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The sequencer core module doesn't call some destructors in the error
path of the init code, which may leave some resources.

This patch mainly fix these leaks by calling the destructors
appropriately at alsa_seq_init().  Also the patch brings a few
cleanups along with it, namely:

- Expand the old "if ((err = xxx) < 0)" coding style
- Get rid of empty seq_queue_init() and its caller
- Change snd_seq_info_done() to void

Last but not least, a couple of functions lose __exit annotation since
they are called also in alsa_seq_init().

No functional changes but minor code cleanups.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

There are a few functions that have been commented out for ages.
And also there are functions that do nothing but placeholders.
Let's kill them.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_midi_event_encode_byte() can never fail, and it can return rather
true/false.  Change the return type to bool, adjust the argument to
receive a MIDI byte as unsigned char, and adjust the comment
accordingly.  This allows callers to drop error checks, which
simplifies the code.

Meanwhile, snd_midi_event_encode() helper is used only in seq_midi.c,
and it can be better folded into it.  This will reduce the total
amount of lines in the end.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 115084 ("Missing break in switch")
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 1357375 ("Missing break in switch")
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Pointer 'urb' is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
warning: variable 'urb' set but not used [-Wunused-but-set-variable]
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Pointer 'dir' is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
warning: variable 'dir' set but not used [-Wunused-but-set-variable]
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The array pcm_devs is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
warning: variable 'pcm_devs' set but not used [-Wunused-but-set-variable]
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>