Add a helper function to figure them out only once.

v2: fix typo with memset
v3: rebase on kfd changes (Alex)
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Just another leftover from radeon.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Acked-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We can't hold the mn_lock while allocating memory.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

No more waiting for a fence done here.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1. initialize kiq before initialize gfx ring.
2. set kiq ring ready immediately when kiq initialize
   successfully.
3. split function gfx_v9_0_kiq_resume into two functions.
     gfx_v9_0_kiq_resume is for kiq initialize.
     gfx_v9_0_kcq_resume is for kcq initialize.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1. initialize kiq before initialize gfx ring.
2. set kiq ring ready immediately when kiq initialize
   successfully.
3. split function gfx_v8_0_kiq_resume into two functions.
   gfx_v8_0_kiq_resume is for kiq initialize.
   gfx_v8_0_kcq_resume is for kcq initialize.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Send all kcq unmap_queue packets and then wait for
complete.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There are no any logical changes here.

1. if kcq can be enabled via kiq, we don't need to
   do kiq ring test.
2. amdgpu_ring_test_ring function can be used to
   sync the ring complete, remove the duplicate code.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Send all kcq unmap_queue packets and then wait for
complete.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There are no any logical changes here.

1. if kcq can be enabled via kiq, we don't need to
   do kiq ring test.
2. amdgpu_ring_test_ring function can be used to
   sync the ring complete, remove the duplicate code.

v2: alloc 6 (not 7) dws for unmap_queues
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

As we have unify powergate_uvd/vce/mmhub to set_powergating_by_smu,
and set_powergating_by_smu was supported by both dpm and powerplay.
so remove the else case.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

when hw_fini/suspend, smu only need to power on uvd block
if uvd pg is supported, don't need to call uvd to do hw_init.

v2: fix typo in patch descriptions and comments.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Tested-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For SI/Kv, the power state is managed by function
amdgpu_pm_compute_clocks.

when dpm enabled, we should call amdgpu_pm_compute_clocks
to update current power state instand of set boot state.

this change can fix the oops when kfd driver was enabled on Kv.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Tested-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Forgot to add vce pg support via smu for Kaveri/Mullins.

Fixes: 561a5c83eadd ("drm/amd/pp: Unify powergate_uvd/vce/mmhub
                       to set_powergating_by_smu")

v2: refine patch descriptions suggested by Michel
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Tested-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

when ac/dc switch, driver will be notified by acpi event.
then the power source will be updated. so don't need to
get power source when set power state.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is required by gfx hw and can fix the rlc hang when
do s3 stree test on Cz/St.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NHang Zhou <hang.zhou@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Set the VM size based on system memory size between the ASIC-specific
limits given by min_vm_size and max_bits. GFXv9 GPUs will keep their
default VM size of 256TB (48 bit). Only older GPUs will adjust VM size
depending on system memory size.

This makes more VM space available for ROCm applications on GFXv8 GPUs
that want to map all available VRAM and system memory in their SVM
address space.

v2:
* Clarify comment
* Round up memory size before >> 30
* Round up automatic vm_size to power of two
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Acked-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Try to kill waves on the SQ.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Try to kill waves on the SQ.

v2: only for the GFX ring for now.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Try to kill waves on the SQ.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Instead of hammering hard on the GPU try a soft recovery first.

v2: reorder code a bit
v3: increase timeout to 10ms, increment GPU reset counter
v4: squash in compile fix (Christian)
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>

The new bulk moving functionality is ready, the overhead of moving PD/PT bos to
LRU is fixed. So move them on LRU again.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Tested-by: NMike Lothian <mike@fireburn.co.uk>
Tested-by: NDieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: NChunming Zhou <david1.zhou@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

I continue to work for bulk moving that based on the proposal by Christian.

Background:
amdgpu driver will move all PD/PT and PerVM BOs into idle list. Then move all of
them on the end of LRU list one by one. Thus, that cause so many BOs moved to
the end of the LRU, and impact performance seriously.

Then Christian provided a workaround to not move PD/PT BOs on LRU with below
patch:
Commit 0bbf32026cf5ba41e9922b30e26e1bed1ecd38ae ("drm/amdgpu: band aid
validating VM PTs")

However, the final solution should bulk move all PD/PT and PerVM BOs on the LRU
instead of one by one.

Whenever amdgpu_vm_validate_pt_bos() is called and we have BOs which need to be
validated we move all BOs together to the end of the LRU without dropping the
lock for the LRU.

While doing so we note the beginning and end of this block in the LRU list.

Now when amdgpu_vm_validate_pt_bos() is called and we don't have anything to do,
we don't move every BO one by one, but instead cut the LRU list into pieces so
that we bulk move everything to the end in just one operation.

Test data:
+--------------+-----------------+-----------+---------------------------------------+
|              |The Talos        |Clpeak(OCL)|BusSpeedReadback(OCL)                  |
|              |Principle(Vulkan)|           |                                       |
+------------------------------------------------------------------------------------+
|              |                 |           |0.319 ms(1k) 0.314 ms(2K) 0.308 ms(4K) |
| Original     |  147.7 FPS      |  76.86 us |0.307 ms(8K) 0.310 ms(16K)             |
+------------------------------------------------------------------------------------+
| Orignial + WA|                 |           |0.254 ms(1K) 0.241 ms(2K)              |
|(don't move   |  162.1 FPS      |  42.15 us |0.230 ms(4K) 0.223 ms(8K) 0.204 ms(16K)|
|PT BOs on LRU)|                 |           |                                       |
+------------------------------------------------------------------------------------+
| Bulk move    |  163.1 FPS      |  40.52 us |0.244 ms(1K) 0.252 ms(2K) 0.213 ms(4K) |
|              |                 |           |0.214 ms(8K) 0.225 ms(16K)             |
+--------------+-----------------+-----------+---------------------------------------+

After test them with above three benchmarks include vulkan and opencl. We can
see the visible improvement than original, and even better than original with
workaround.

v2: move all BOs include idle, relocated, and moved list to the end of LRU and
put them together.
v3: remove unused parameter and use list_for_each_entry instead of the one with
save entry.
v4: move the amdgpu_vm_move_to_lru_tail after command submission, at that time,
all bo will be back on idle list.
v5: remove amdgpu_vm_move_to_lru_tail_by_list(), use bulk_moveable instread of
validated, and move ttm_bo_bulk_move_lru_tail() also into
amdgpu_vm_move_to_lru_tail().
v6: clean up and fix return value.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Tested-by: NMike Lothian <mike@fireburn.co.uk>
Tested-by: NDieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: NChunming Zhou <david1.zhou@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This function allow us to bulk move a group of BOs to the tail of their LRU.
The positions of group of BOs are stored on the (first, last) bulk_move_pos
structure.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Tested-by: NMike Lothian <mike@fireburn.co.uk>
Tested-by: NDieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: NChunming Zhou <david1.zhou@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When move a BO to the end of LRU, it need remember the BO positions.
Make sure all moved bo in between "first" and "last". And they will be bulk
moving together.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Tested-by: NMike Lothian <mike@fireburn.co.uk>
Tested-by: NDieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: NChunming Zhou <david1.zhou@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add bulk move pos to store the pointer of first and last buffer object.
The list in between will be bulk moved on lru list.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Tested-by: NMike Lothian <mike@fireburn.co.uk>
Tested-by: NDieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: NChunming Zhou <david1.zhou@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add a helper to get the root PD address and remove the workarounds from
the GMC9 code for that.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We can easily figure out the address on the fly.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

sed -i "s/gart.robj/gart.bo/" drivers/gpu/drm/amd/amdgpu/*.c
sed -i "s/gart.robj/gart.bo/" drivers/gpu/drm/amd/amdgpu/*.h

Just cleaning up radeon leftovers.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move setting the GART addr for window based copies into the TTM code who
uses it.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add a helper function for getting the root PD addr and cleanup join the
two VM related functions and cleanup the function name.

No functional change.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Preparation for following changes. This validates the root PD twice,
but the overhead of that should be minimal.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Check if we should call the function instead of providing the forced
flag.

v2: rebase on KFD changes (Alex)
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixes: d790449835e6 ("drm/amdgpu: use kiq to do invalidate tlb")
Reviewed-by: NEmily Deng <Emily.Deng@amd.com>
Signed-off-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds support for LVDS displays.

v2: add support for spread spectrum, sink detect
v3: clean up enable_lvds_output
v4: fix up link_detect
v5: remove assert on 888 format

Bug: https://bugs.freedesktop.org/show_bug.cgi?id=105880Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When in gpu reset, don't use kiq, it will generate more TDR.
Signed-off-by: NEmily Deng <Emily.Deng@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

do not remove entity from the rq if the current rq is from
the least loaded scheduler.
Signed-off-by: NNayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The if statement isn't indented and it makes static checkers complain.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix comile warning like,
  CC [M]  drivers/gpu/drm/i915/gvt/execlist.o
  CC [M]  drivers/gpu/drm/nouveau/nvkm/subdev/instmem/nv50.o
  CC [M]  drivers/gpu/drm/radeon/btc_dpm.o
  CC [M]  drivers/isdn/hisax/avm_a1p.o
  CC [M]  drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_dpp.o
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c: In function ‘dcn10_update_mpcc’:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:1903:9: warning: missing braces around initializer [-Wmissing-braces]
  struct mpcc_blnd_cfg blnd_cfg = {0};
         ^
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:1903:9: warning: (near initialization for ‘blnd_cfg.black_color’) [-Wmissing-braces]
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NWen Yang <wen.yang99@zte.com.cn>
Reviewed-by: NJiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For sriov, don't use kiq in exclusive mode, as don't know how long time
it will take, some times it will occur exclusive timeout.
Signed-off-by: NEmily Deng <Emily.Deng@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>