Just use dentry_unhash() there
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... especially when it only needs (and initializes) .d_name of it
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

apply function to vfsmounts in set returned by collect_mounts(),
stop if it returns non-zero.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

RFC says we need to follow the chain of mounts if there's more
than one stacked on that point.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

No need to open-code follow_up() in it and locking can be lighter.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

(mnt,mnt_mountpoint) pair is conceptually wrong; if you want
to use it for generating pathname and for nothing else *and*
if you know that vfsmount tree is unchanging, you can get
away with that, but the right solution for that is (mnt,mnt_root).
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Analog of is_subdir for vfsmount,dentry pairs, moved from audit_tree.c
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The handling of mount flags in set_mnt_shared() got a little tangled
up during previous cleanups, with the following problems:

* MNT_PNODE_MASK is defined as a literal constant when it should be a
bitwise xor of other MNT_* flags
* set_mnt_shared() clears and then sets MNT_SHARED (part of MNT_PNODE_MASK)
* MNT_PNODE_MASK could use a comment in mount.h
* MNT_PNODE_MASK is a terrible name, change to MNT_SHARED_MASK

This patch fixes these problems.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

No one is calling this anymore as everyone has switched to
invalidate_mapping_pages long time ago.  Also update a few
references to it in comments.  nfs has two more, but I can't
easily figure what they are actually referring to, so I left
them as-is.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

re-order structure super_block to remove 16 bytes of alignment padding
on 64bit builds.

This shrinks the size of super_block from 712 to 696 bytes so requiring
one fewer 64 byte cache lines.
Signed-off-by: NRichard Kennedy <richard@rsk.demon.co.uk>

-----
patch against 2.6.33-rc5
compiled & tested on x86_64 AMDX2 desktop machine.

I've been running with this patch applied for several weeks with no
problems.

regards
Richard
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

->kill_sb() will be called after any failure exit, so no need
to duplicate what it can do.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

kill_litter_super() from ->kill_sb() will take care of the junk

... and get rid of open-coding its guts (i.e. RIP autofs4_force_release())
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

path to mnt/mnt->mnt_root is no worse than that to
mnt->mnt_parent/mnt->mnt_mountpoint *and* needs no
pinning the sucker down (mnt is not going away and
mnt->mnt_root won't change)
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* document locking
* add the missing part of data structure invariants (relationship
between mnt_share and mnt_slave lists in case of a peer group
among slaves).
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

First of all, get_source() never results in CL_PROPAGATION
alone.  We either get CL_MAKE_SHARED (for the continuation
of peer group) or CL_SLAVE (slave that is not shared) or both
(beginning of peer group among slaves).  Massage the code to
make that explicit, kill CL_PROPAGATION test in clone_mnt()
(nothing sets CL_MAKE_SHARED without CL_PROPAGATION and in
clone_mnt() we are checking CL_PROPAGATION after we'd found
that there's no CL_SLAVE, so the check for CL_MAKE_SHARED
would do just as well).

Fix comments, while we are at it...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... instead of mixing FMODE_ and O_
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Invalidate sb->s_bdev on remount,ro.

Fixes a problem reported by Jorge Boncompte who is seeing corruption
trying to snapshot a minix filesystem image.  Some filesystems modify
their metadata via a path other than the bdev buffer cache (eg.  they may
use a private linear mapping for their metadata, or implement directories
in pagecache, etc).  Also, file data modifications usually go to the bdev
via their own mappings.

These updates are not coherent with buffercache IO (eg.  via /dev/bdev)
and never have been.  However there could be a reasonable expectation that
after a mount -oremount,ro operation then the buffercache should
subsequently be coherent with previous filesystem modifications.

So invalidate the bdev mappings on a remount,ro operation to provide a
coherency point.

The problem was exposed when we switched the old rd to brd because old rd
didn't really function like a normal block device and updates to rd via
mappings other than the buffercache would still end up going into its
buffercache.  But the same problem has always affected other "normal"
block devices, including loop.

[akpm@linux-foundation.org: repair comment layout]
Reported-by: N"Jorge Boncompte [DTI2]" <jorge@dti2.net>
Tested-by: N"Jorge Boncompte [DTI2]" <jorge@dti2.net>
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cleanup EXPORT* macros according to Documantation/CodingStyle.

Move EXPORT* macros to the line immediately after the closing
function brace.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

EXPORT_SYMBOL(proc_symlink);
EXPORT_SYMBOL(proc_mkdir);
EXPORT_SYMBOL(create_proc_entry);
EXPORT_SYMBOL(proc_create_data);
EXPORT_SYMBOL(remove_proc_entry);

Those EXPORT_SYMBOL shouldn't be in fs/proc/root.c,
should be in fs/proc/generic.c.
Signed-off-by: NHelight.Xu <helight.xu@gmail.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Remove the EXPORT_UNUSED_SYMBOL of simple_prepare_write

Collapse simple_prepare_write into it's only caller, though
making it simpler and clearer to understand.
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* simple_commit_write was only called by simple_write_end.
  Open coding it makes it tiny bit less heavy on the arithmetic and
  much more readable.

* While at it use zero_user() for clearing a partial page.
* While at it add a docbook comment for simple_write_end.
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This reverts commit 213614d5.

Alas, ->d_revalidate() can't rely on ->lookup() finishing what
it's started; if d_alloc() in do_lookup() fails, we are not going
to call ->lookup() at all.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
  parisc: Set PCI CLS early in boot.

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Fix broken sn2 build

Set the PCI CLS early in the boot process to prevent
device failures. In pcibios_set_master use the new
pci_cache_line_size instead of a hard-coded value.
Signed-off-by: NCarlos O'Donell <carlos@codesourcery.com>
Reviewed-by: NGrant Grundler <grundler@google.com>
Signed-off-by: NKyle McMartin <kyle@redhat.com>

* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix out_le32() macro
  microblaze: Fix cache loop function for cache range

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  Revert "block: improve queue_should_plug() by looking at IO depths"

Trailing semicolon causes compilation involving out_le32() to fail.
Signed-off-by: NSteven J. Magnani <steve@digidescorp.com>
Signed-off-by: NMichal Simek <monstr@monstr.eu>

I create wrong asm code but none test shows that this part of code is wrong.
I am not convinces that were good idea to create asm optimized macros
for caches. The reason is that there is not optimization with previous code
that's why make sense to add old code and do some benchmarking which
functions are faster.
Signed-off-by: NMichal Simek <monstr@monstr.eu>