The Belkin B2B128 is a USB 3.0 Hub + Gigabit Ethernet Adapter, the
Ethernet adapter uses the ASIX AX88179 USB 3.0 to Gigabit Ethernet
chip supported by this driver, add the USB ID for the same.

This patch is based on work by Geoffrey Tran <geoffrey.tran@gmail.com>
who has indicated they would like this upstreamed by someone more
familiar with the upstreaming process.
Signed-off-by: NAndrew F. Davis <afd@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A previous commit (5567e989) inserted a dependency on DMA
API that requires HAS_DMA to be added in Kconfig.
Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similar to the fix provided by Dominik Heidler in commit
9b3dc0a1 ("l2tp: cast l2tp traffic counter to unsigned")
we need to take care of 32bit kernels in dev_get_stats().

When using atomic_long_read(), we add a 'long' to u64 and
might misinterpret high order bit, unless we cast to unsigned.

Fixes: caf586e5 ("net: add a core netdev->rx_dropped counter")
Fixes: 015f0688 ("net: net: add a core netdev->tx_dropped counter")
Fixes: 6e7333d3 ("net: add rx_nohandler stat counter")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Jarod Wilson <jarod@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We have to reset the sk->sk_rx_dst when we disconnect a TCP
connection, because otherwise when we re-connect it this
dst reference is simply overridden in tcp_finish_connect().

This fixes a dst leak which leads to a loopback dev refcnt
leak. It is a long-standing bug, Kevin reported a very similar
(if not same) bug before. Thanks to Andrei for providing such
a reliable reproducer which greatly narrows down the problem.

Fixes: 41063e9d ("ipv4: Early TCP socket demux.")
Reported-by: NAndrei Vagin <avagin@gmail.com>
Reported-by: NKevin Xu <kaiwen.xu@hulu.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In __ip6_datagram_connect(), reset sk->sk_v6_daddr and inet->dport if
error occurs.
In udp_v6_early_demux(), check for sk_state to make sure it is in
TCP_ESTABLISHED state.
Together, it makes sure unconnected UDP socket won't be considered as a
valid candidate for early demux.

v3: add TCP_ESTABLISHED state check in udp_v6_early_demux()
v2: fix compilation error

Fixes: 5425077d ("net: ipv6: Add early demux handler for UDP unicast")
Signed-off-by: NWei Wang <weiwan@google.com>
Acked-by: NMaciej Żenczykowski <maze@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When mc configuration changes bnx2x_config_mcast() can return 0 for
success, negative for failure and positive for benign reason preventing
its immediate work, e.g., when the command awaits the completion of
a previously sent command.

When removing all configured macs on a 578xx adapter, if a positive
value would be returned driver would errneously log it as an error.

Fixes: c7b7b483 ("bnx2x: Don't flush multicast MACs")
Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Error handling and netpoll fixes.

Add missing error handling and fix netpoll handling.  The current code
handles RX and TX events in netpoll mode and is causing lots of warnings
and errors in the RX code path in netpoll mode.  The fix is to only handle
TX events in netpoll mode.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To handle netpoll properly, the driver must only handle TX packets
during NAPI.  Handling RX events cause warnings and errors in
netpoll mode. The ndo_poll_controller() method should call
napi_schedule() directly so that a NAPI weight of zero will be used
during netpoll mode.

The bnxt_en driver supports 2 ring modes: combined, and separate rx/tx.
In separate rx/tx mode, the ndo_poll_controller() method will only
process the tx rings.  In combined mode, the rx and tx completion
entries are mixed in the completion ring and we need to drop the rx
entries and recycle the rx buffers.

Add a function bnxt_force_rx_discard() to handle this in netpoll mode
when we see rx entries in combined ring mode.
Reported-by: NCalvin Owens <calvinowens@fb.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When we get a TPA_END completion to handle a completed LRO packet, it
is possible that hardware would indicate errors.  The current code is
not checking for the error condition.  Define the proper error bits and
the macro to check for this error and abort properly.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The function, skb_complete_tx_timestamp(), used to allow passing in a
NULL pointer for the time stamps, but that was changed in commit
62bccb8c ("net-timestamp: Make the
clone operation stand-alone from phy timestamping"), and the existing
call sites, all of which are in the dp83640 driver, were fixed up.

Even though the kernel-doc was subsequently updated in commit
7a76a021 ("net-timestamp: Update
skb_complete_tx_timestamp comment"), still a bug fix from Manfred
Rudigier came into the driver using the old semantics.  Probably
Manfred derived that patch from an older kernel version.

This fix should be applied to the stable trees as well.

Fixes: 81e8f2e9 ("net: dp83640: Fix tx timestamp overflow handling.")
Signed-off-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net): ipsec 2017-06-23

1) Fix xfrm garbage collecting when unregistering a netdevice.
   From Hangbin Liu.

2) Fix NULL pointer derefernce when exiting a network namespace.
   From Hangbin Liu.

3) Fix some error codes in pfkey to prevent a NULL pointer derefernce.
   From Dan Carpenter.

4) Fix NULL pointer derefernce on allocation failure in pfkey.
   From Dan Carpenter.

5) Adjust IPv6 payload_len to include extension headers. Otherwise
   we corrupt the packets when doing ESP GRO on transport mode.
   From Yossi Kuperman.

6) Set nhoff to the proper offset of the IPv6 nexthdr when doing ESP GRO.
   From Yossi Kuperman.

Please pull or let me know if there are problems.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The memory allocation size is controlled by user-space,
if it is too large just fail silently and return NULL,
not to mention there is a fallback allocation later.
Reported-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Tested-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Our customer encountered stuck NFS writes for blocks starting at specific
offsets w.r.t. page boundary caused by networking stack sending packets via
UFO enabled device with wrong checksum. The problem can be reproduced by
composing a long UDP datagram from multiple parts using MSG_MORE flag:

  sendto(sd, buff, 1000, MSG_MORE, ...);
  sendto(sd, buff, 1000, MSG_MORE, ...);
  sendto(sd, buff, 3000, 0, ...);

Assume this packet is to be routed via a device with MTU 1500 and
NETIF_F_UFO enabled. When second sendto() gets into __ip_append_data(),
this condition is tested (among others) to decide whether to call
ip_ufo_append_data():

  ((length + fragheaderlen) > mtu) || (skb && skb_is_gso(skb))

At the moment, we already have skb with 1028 bytes of data which is not
marked for GSO so that the test is false (fragheaderlen is usually 20).
Thus we append second 1000 bytes to this skb without invoking UFO. Third
sendto(), however, has sufficient length to trigger the UFO path so that we
end up with non-UFO skb followed by a UFO one. Later on, udp_send_skb()
uses udp_csum() to calculate the checksum but that assumes all fragments
have correct checksum in skb->csum which is not true for UFO fragments.

When checking against MTU, we need to add skb->len to length of new segment
if we already have a partially filled skb and fragheaderlen only if there
isn't one.

In the IPv6 case, skb can only be null if this is the first segment so that
we have to use headersize (length of the first IPv6 header) rather than
fragheaderlen (length of IPv6 header of further fragments) for skb == NULL.

Fixes: e89e9cf5 ("[IPv4/IPv6]: UFO Scatter-gather approach")
Fixes: e4c5e13a ("ipv6: Should use consistent conditional judgement for
	ip6 fragment between __ip6_append_data and ip6_finish_output")
Signed-off-by: NMichal Kubecek <mkubecek@suse.cz>
Acked-by: NVlad Yasevich <vyasevic@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The 8000 series adapters uses catch-all filters for encapsulated traffic
to support filtering VXLAN, NVGRE and GENEVE traffic.
This new filter functionality requires a longer MCDI command.
This patch increases the size of buffers on stack that were missed, which
fixes a kernel panic from the stack protector.

Fixes: 9b410801 ("sfc: insert catch-all filters for encapsulated traffic")
Signed-off-by: NMartin Habets <mhabets@solarflare.com>
Acked-by: NEdward Cree <ecree@solarflare.com>
Acked-by: Bert Kenward bkenward@solarflare.com
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This structure member is hidden behind CONFIG_SYSFS, and we
get a build error when that is disabled:

drivers/net/hyperv/netvsc_drv.c: In function 'netvsc_set_channels':
drivers/net/hyperv/netvsc_drv.c:754:49: error: 'struct net_device' has no member named 'num_rx_queues'; did you mean 'num_tx_queues'?
drivers/net/hyperv/netvsc_drv.c: In function 'netvsc_set_rxfh':
drivers/net/hyperv/netvsc_drv.c:1181:25: error: 'struct net_device' has no member named 'num_rx_queues'; did you mean 'num_tx_queues'?

As the value is only set once to the argument of alloc_netdev_mq(),
we can compare against that constant directly.

Fixes: ff4a4419 ("netvsc: allow get/set of RSS indirection table")
Fixes: 2b01888d ("netvsc: allow more flexible setting of number of channels")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The per netns loopback_dev->ip6_ptr is unregistered and set to
NULL when its mtu is set to smaller than IPV6_MIN_MTU, this
leads to that we could set rt->rt6i_idev NULL after a
rt6_uncached_list_flush_dev() and then crash after another
call.

In this case we should just bring its inet6_dev down, rather
than unregistering it, at least prior to commit 176c39af
("netns: fix addrconf_ifdown kernel panic") we always
override the case for loopback.

Thanks a lot to Andrey for finding a reliable reproducer.

Fixes: 176c39af ("netns: fix addrconf_ifdown kernel panic")
Reported-by: NAndrey Konovalov <andreyknvl@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Daniel Lezcano <dlezcano@fr.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Tested-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Vladislav Yasevich says:

====================
macvlan: Fix some issues with changing mac addresses

There are some issues in macvlan wrt to changing it's mac address.
* An error is returned in the specified address is the same as an already
  assigned address.
* In passthru mode, the mac address of the macvlan device doesn't change.
* After changing the mac address of a passthru macvlan and then removing it,
  the mac address of the physical device remains changed.

This patch series attempts to resolve these issues.

V2: Address a small issue in p4 where we save the address from the lowerdev
    (from girish.moodalbail@oracle.com)
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Passthru macvlans directly change the mac address of the lower
level device.  That's OK, but after the macvlan is deleted,
the lower device is left with changed address and one needs to
reboot to bring back the origina HW addresses.

This scenario is actually quite common with passthru macvtap devices.

This patch attempts to solve this, by storing the mac address
of the lower device in macvlan_port structure and keeping track of
it through the changes.

After this patch, any changes to the lower device mac address
done trough the macvlan device, will be reverted back.  Any
changs done directly to the lower device mac address will be kept.
Signed-off-by: NVladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert the port passthru boolean into flags with accesor functions.
Signed-off-by: NVladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a lower device of the passthru macvlan changes it's address,
passthru macvlan is supposed to change it's own address as well.
However, that doesn't happen correctly because the check in
macvlan_addr_busy() will catch the fact that the lower level
(port) mac address is the same as the address we are trying to
assign to the macvlan, and return an error.  As a reasult,
the address of the passthru macvlan device is never changed.

The same thing happens when the user attempts to change the
mac address of the passthru macvlan.

The simple solution appers to be to not check against
the lower device in case of passthru macvlan device, since
the 2 addresses are _supposed_ to be the same.
Signed-off-by: NVladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The user currently gets an EBUSY error when attempting to set
the mac address on a macvlan device to the same value.

This should really be a no-op as nothing changes.  Catch
the condition and return early.
Signed-off-by: NVladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a flag to indicate if a queue is rate-limited. Test the flag in
NAPI poll handler and avoid rescheduling the queue if true, otherwise
we risk locking up the host. The rescheduling will be done in the
timer callback function.
Reported-by: NJean-Louis Dupond <jean-louis@dupond.be>
Signed-off-by: NWei Liu <wei.liu2@citrix.com>
Tested-by: NJean-Louis Dupond <jean-louis@dupond.be>
Reviewed-by: NPaul Durrant <paul.durrant@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are number of problems with configuration peer
network device in absence of IFLA_VETH_PEER attributes
where attributes for main network device shared with
peer.

First it is not feasible to configure both network
devices with same MAC address since this makes
communication in such configuration problematic.

This case can be reproduced with following sequence:

  # ip link add address 02:11:22:33:44:55 type veth
  # ip li sh
  ...
  26: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc \
  noop state DOWN mode DEFAULT qlen 1000
      link/ether 00:11:22:33:44:55 brd ff:ff:ff:ff:ff:ff
  27: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc \
  noop state DOWN mode DEFAULT qlen 1000
      link/ether 00:11:22:33:44:55 brd ff:ff:ff:ff:ff:ff

Second it is not possible to register both main and
peer network devices with same name, that happens
when name for main interface is given with IFLA_IFNAME
and same attribute reused for peer.

This case can be reproduced with following sequence:

  # ip link add dev veth1a type veth
  RTNETLINK answers: File exists

To fix both of the cases check if corresponding netlink
attributes are taken from peer_tb when valid or
name based on rtnl ops kind and random address is used.
Signed-off-by: NSerhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

cpsw driver tries to get macid for am43xx SoCs using the compatible
ti,am4372. But not all variants of am43x uses this complatible like
epos evm uses ti,am438x. So use a generic compatible ti,am43 to get
macid for all am43 based platforms.
Reviewed-by: NDave Gerlach <d-gerlach@ti.com>
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In commit 242d3a49 ("ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf")
I assumed NETDEV_REGISTER and NETDEV_UNREGISTER are paired,
unfortunately, as reported by jeffy, netdev_wait_allrefs()
could rebroadcast NETDEV_UNREGISTER event until all refs are
gone.

We have to add an additional check to avoid this corner case.
For netdev_wait_allrefs() dev->reg_state is NETREG_UNREGISTERED,
for dev_change_net_namespace(), dev->reg_state is
NETREG_REGISTERED. So check for dev->reg_state != NETREG_UNREGISTERED.

Fixes: 242d3a49 ("ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf")
Reported-by: Njeffy <jeffy.chen@rock-chips.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The commit ("net/phy: micrel: Add workaround for bad autoneg") fixes an
autoneg failure case by resetting the hardware. This turns off
intterupts. Things will work themselves out if the phy polls, as it will
figure out it's state during a poll. However if the phy uses only
intterupts, the phy will stall, since interrupts are off. This patch
fixes the issue by calling config_intr after resetting the phy.

Fixes: d2fd719b ("net/phy: micrel: Add workaround for bad autoneg ")
Signed-off-by: NZach Brown <zach.brown@ni.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IP6CB(skb)->nhoff is the offset of the nexthdr field in an IPv6
header, unless there are extension headers present, in which case
nhoff points to the nexthdr field of the last extension header.

In non-GRO code path, nhoff is set by ipv6_rcv before any XFRM code
is executed. Conversely, in GRO code path (when esp6_offload is loaded),
nhoff is not set. The following functions fail to read the correct value
and eventually the packet is dropped:

    xfrm6_transport_finish
    xfrm6_tunnel_input
    xfrm6_rcv_tnl

Set nhoff to the proper offset of nexthdr in esp6_gro_receive.

Fixes: 7785bba2 ("esp: Add a software GRO codepath")
Signed-off-by: NYossi Kuperman <yossiku@mellanox.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

IPv6 payload length indicates the size of the payload, including any
extension headers.

In xfrm6_transport_finish, ipv6_hdr(skb)->payload_len is set to the
payload size only, regardless of the presence of any extension headers.
After ESP GRO transport mode decapsulation, ipv6_rcv trims the packet
according to the wrong payload_len, thus corrupting the packet.

Set payload_len to account for extension headers as well.

Fixes: 7785bba2 ("esp: Add a software GRO codepath")
Signed-off-by: NYossi Kuperman <yossiku@mellanox.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

Pull networking fixes from David Miller:

 1) Fix refcounting wrt timers which hold onto inet6 address objects,
    from Xin Long.

 2) Fix an ancient bug in wireless wext ioctls, from Johannes Berg.

 3) Firmware handling fixes in brcm80211 driver, from Arend Van Spriel.

 4) Several mlx5 driver fixes (firmware readiness, timestamp cap
    reporting, devlink command validity checking, tc offloading, etc.)
    From Eli Cohen, Maor Dickman, Chris Mi, and Or Gerlitz.

 5) Fix dst leak in IP/IP6 tunnels, from Haishuang Yan.

 6) Fix dst refcount bug in decnet, from Wei Wang.

 7) Netdev can be double freed in register_vlan_device(). Fix from Gao
    Feng.

 8) Don't allow object to be destroyed while it is being dumped in SCTP,
    from Xin Long.

 9) Fix dpaa_eth build when modular, from Madalin Bucur.

10) Fix throw route leaks, from Serhey Popovych.

11) IFLA_GROUP missing from if_nlmsg_size() and ifla_policy[] table,
    also from Serhey Popovych.

12) Fix premature TX SKB free in stmmac, from Niklas Cassel.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (36 commits)
  igmp: add a missing spin_lock_init()
  net: stmmac: free an skb first when there are no longer any descriptors using it
  sfc: remove duplicate up_write on VF filter_sem
  rtnetlink: add IFLA_GROUP to ifla_policy
  ipv6: Do not leak throw route references
  dt-bindings: net: sms911x: Add missing optional VDD regulators
  dpaa_eth: reuse the dma_ops provided by the FMan MAC device
  fsl/fman: propagate dma_ops
  net/core: remove explicit do_softirq() from busy_poll_stop()
  fib_rules: Resolve goto rules target on delete
  sctp: ensure ep is not destroyed before doing the dump
  net/hns:bugfix of ethtool -t phy self_test
  net: 8021q: Fix one possible panic caused by BUG_ON in free_netdev
  cxgb4: notify uP to route ctrlq compl to rdma rspq
  ip6_tunnel: Correct tos value in collect_md mode
  decnet: always not take dst->__refcnt when inserting dst into hash table
  ip6_tunnel: fix potential issue in __ip6_tnl_rcv
  ip_tunnel: fix potential issue in ip_tunnel_rcv
  brcmfmac: fix uninitialized warning in brcmf_usb_probe_phase2()
  net/mlx5e: Avoid doing a cleanup call if the profile doesn't have it
  ...

Pull more pin control fixes from Linus Walleij:
 "Some late arriving fixes. I should have sent earlier, just swamped
  with work as usual. Thomas patch makes AMD systems usable despite
  firmware bugs so it is fairly important.

   - Make the AMD driver use a regular interrupt rather than a chained
     one, so the system does not lock up.

   - Fix a function call error deep inside the STM32 driver"

* tag 'pinctrl-v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: stm32: Fix bad function call
  pinctrl/amd: Use regular interrupt instead of chained

Pull HID fixes from Jiri Kosina:

 - revert of a commit to magicmouse driver that regressess certain
   devices, from Daniel Stone

 - quirk for a specific Dell mouse, from Sebastian Parschauer

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  Revert "HID: magicmouse: Set multi-touch keybits for Magic Mouse"
  HID: Add quirk for Dell PIXART OEM mouse

Pull livepatching fix from Jiri Kosina:
 "Fix the way how livepatches are being stacked with respect to RCU,
  from Petr Mladek"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  livepatch: Fix stacking of patches with respect to RCU

Pull more ufs fixes from Al Viro:
 "More UFS fixes, unfortunately including build regression fix for the
  64-bit s_dsize commit. Fixed in this pile:

   - trivial bug in signedness of 32bit timestamps on ufs1

   - ESTALE instead of ufs_error() when doing open-by-fhandle on
     something deleted

   - build regression on 32bit in ufs_new_fragments() - calculating that
     many percents of u64 pulls libgcc stuff on some of those. Mea
     culpa.

   - fix hysteresis loop broken by typo in 2.4.14.7 (right next to the
     location of previous bug).

   - fix the insane limits of said hysteresis loop on filesystems with
     very low percentage of reserved blocks. If it's 5% or less, just
     use the OPTSPACE policy.

   - calculate those limits once and mount time.

  This tree does pass xfstests clean (both ufs1 and ufs2) and it _does_
  survive cross-builds.

  Again, my apologies for missing that, especially since I have noticed
  a related percentage-of-64bit issue in earlier patches (when dealing
  with amount of reserved blocks). Self-LART applied..."

* 'ufs-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ufs: fix the logics for tail relocation
  ufs_iget(): fail with -ESTALE on deleted inode
  fix signedness of timestamps on ufs1

Fix expand_upwards() on architectures with an upward-growing stack (parisc,
metag and partly IA-64) to allow the stack to reliably grow exactly up to
the address space limit given by TASK_SIZE.
Signed-off-by: NHelge Deller <deller@gmx.de>
Acked-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Trinity gets kernel BUG at mm/mmap.c:1963! in about 3 minutes of
mmap testing.  That's the VM_BUG_ON(gap_end < gap_start) at the
end of unmapped_area_topdown().  Linus points out how MAP_FIXED
(which does not have to respect our stack guard gap intentions)
could result in gap_end below gap_start there.  Fix that, and
the similar case in its alternative, unmapped_area().

Cc: stable@vger.kernel.org
Fixes: 1be7107f ("mm: larger stack guard gap, between vmas")
Reported-by: NDave Jones <davej@codemonkey.org.uk>
Debugged-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NHugh Dickins <hughd@google.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Andrey reported a lockdep warning on non-initialized
spinlock:

 INFO: trying to register non-static key.
 the code is fine but needs lockdep annotation.
 turning off the locking correctness validator.
 CPU: 1 PID: 4099 Comm: a.out Not tainted 4.12.0-rc6+ #9
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
 Call Trace:
  __dump_stack lib/dump_stack.c:16
  dump_stack+0x292/0x395 lib/dump_stack.c:52
  register_lock_class+0x717/0x1aa0 kernel/locking/lockdep.c:755
  ? 0xffffffffa0000000
  __lock_acquire+0x269/0x3690 kernel/locking/lockdep.c:3255
  lock_acquire+0x22d/0x560 kernel/locking/lockdep.c:3855
  __raw_spin_lock_bh ./include/linux/spinlock_api_smp.h:135
  _raw_spin_lock_bh+0x36/0x50 kernel/locking/spinlock.c:175
  spin_lock_bh ./include/linux/spinlock.h:304
  ip_mc_clear_src+0x27/0x1e0 net/ipv4/igmp.c:2076
  igmpv3_clear_delrec+0xee/0x4f0 net/ipv4/igmp.c:1194
  ip_mc_destroy_dev+0x4e/0x190 net/ipv4/igmp.c:1736

We miss a spin_lock_init() in igmpv3_add_delrec(), probably
because previously we never use it on this code path. Since
we already unlink it from the global mc_tomb list, it is
probably safe not to acquire this spinlock here. It does not
harm to have it although, to avoid conditional locking.

Fixes: c38b7d32 ("igmp: acquire pmc lock for ip_mc_clear_src()")
Reported-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2017-06-20' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 4.12

Two important fixes for brcmfmac. The rest of the brcmfmac patches are
either code preparation and fixing a new build warning.

brcmfmac

* fix a NULL pointer dereference during resume

* fix a NULL pointer dereference with USB devices, a regression from
  v4.12-rc1
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When having the skb pointer in the first descriptor, stmmac_tx_clean
can get called at a moment where the IP has only cleared the own bit
of the first descriptor, thus freeing the skb, even though there can
be several descriptors whose buffers point into the same skb.

By simply moving the skb pointer from the first descriptor to the last
descriptor, a skb will get freed only when the IP has cleared the
own bit of all the descriptors that are using that skb.
Signed-off-by: NNiklas Cassel <niklas.cassel@axis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Somehow two copies of the line 'up_write(&vf->efx->filter_sem);' got into
 efx_ef10_sriov_set_vf_vlan().  This would put the mutex in a bad state and
 cause all subsequent down attempts to hang.

Fixes: 671b53ee ("sfc: Ensure down_write(&filter_sem) and up_write() are matched before calling efx_net_open()")
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Network interface groups support added while ago, however
there is no IFLA_GROUP attribute description in policy
and netlink message size calculations until now.

Add IFLA_GROUP attribute to the policy.

Fixes: cbda10fa ("net_device: add support for network device groups")
Signed-off-by: NSerhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>