RQ/SQ will be used to implement IB verbs QPs, so the IB QP affiliated
events are affiliated also with SQs and RQs.

Since SQ, RQ and QP resource numbers do not share the same name
space, a queue type field was added to the event data to specify
the SW object that the event is affiliated with.
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

To be used by mlx5_ib in the following patches for implementing
RAW PACKET QP.

Add mlx5_core_ prefix to alloc and delloc transport_domain since
they are exposed now.
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

RoCEv2 packets are sent over IP/UDP protocols.
The mlx4 driver uses a type of RAW QP to send packets for QP1 and
therefore needs to build the network headers below BTH in software.

This patch adds option to build QP1 packets with IP and UDP headers if
RoCEv2 is requested.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In order to support modify_qp for RoCE v2, we need to set
the gid_type in the QP context.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This will be used in hardware device driver when building QP or AH
contexts.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In RoCE v2 we need to choose a source UDP port, we do so by using
entropy over the source and dest QPNs.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In order to support RoCE v2, the hardware needs to be configured
to classify certain UDP packets as RoCE v2 packets and pass it
through its RoCE pipeline. This patch enables configuring this
UDP port.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

To tell hardware about a gid with type RoCEv2, software needs a new
modifier to the SET_PORT command: MLX4_SET_PORT_ROCE_ADDR. This can
replace the old method, MLX4_SET_PORT_GID_TABLE, for  RoCEv1 gids.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Query the RoCE support from firmware using the appropriate firmware
commands. Downstream patches will read these capabilities and act
accordingly.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

We now alwasy have a per-PD local_dma_lkey available.  Make use of that
fact in svc_rdma and stop registering our own MR.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Acked-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

To support the server-side of an NFSv4.1 backchannel on RDMA
connections, add a transport class that enables backward
direction messages on an existing forward channel connection.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Acked-by: NBruce Fields <bfields@fieldses.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Extra resources for handling backchannel requests have to be
pre-allocated when a transport instance is created. Set up
additional fields in svcxprt_rdma to track these resources.

The max_requests fields are elements of the RPC-over-RDMA
protocol, so they should be u32. To ensure that unsigned
arithmetic is used everywhere, some other fields in the
svcxprt_rdma struct are updated.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Acked-by: NBruce Fields <bfields@fieldses.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Pre-requisite to use map_xdr in the backchannel code.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Acked-by: NBruce Fields <bfields@fieldses.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

svc_rdma_post_recv() allocates pages for receive buffers on-demand.
It uses GFP_KERNEL so the allocator tries hard, and may sleep. But
I'm about to add a call to svc_rdma_post_recv() from a function
that may not sleep.

Since all svc_rdma_post_recv() call sites can tolerate its failure,
allow it to fail if the page allocator returns nothing. Longer term,
receive buffers, being a finite resource per-connection, should be
pre-allocated and re-used.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Acked-by: NBruce Fields <bfields@fieldses.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Clean up.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Acked-by: NBruce Fields <bfields@fieldses.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

To ensure this allocation cannot fail and will not sleep,
pre-allocate the req_map structures per-connection.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Acked-by: NBruce Fields <bfields@fieldses.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When the maximum payload size of NFS READ and WRITE was increased
by commit cc9a903d ("svcrdma: Change maximum server payload back
to RPCSVC_MAXPAYLOAD"), the size of struct svc_rdma_op_ctxt
increased to over 6KB (on x86_64). That makes allocating one of
these from a kmem_cache more likely to fail in situations when
system memory is exhausted.

Since I'm about to add a caller where this allocation must always
work _and_ it cannot sleep, pre-allocate ctxts for each connection.

Another motivation for this change is that NFSv4.x servers are
required by specification not to drop NFS requests. Pre-allocating
memory resources reduces the likelihood of a drop.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Acked-by: NBruce Fields <bfields@fieldses.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Previously, IPV6_DEFAULT_HOPLIMIT was used as the hop limit value for
RoCE. Fixing that by taking ip4_dst_hoplimit and ip6_dst_hoplimit as
hop limit values.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

rdma_addr_find_dmac_by_grh resolves dmac, vlan_id and if_index and
downsteram patch will also add hop_limit as an output parameter,
thus we rename it to rdma_addr_find_l2_eth_by_grh.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Stop abusing wr_id and just pass the parameter explicitly.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHal Rosenstock <hal@mellanox.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The macro mlx4_foreach_non_ib_transport_port() is not used anywhere. Remove it.

Fixes: aa9a2d51 ("mlx4: Activate RoCE/SRIOV")
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The iser RDMA_CM negotiation protocol is shared by
the initiator and the target, so have a shared header
for the defines and structure. Move relevant items from
the initiator and target headers.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NJenny Derzhavetz <jennyf@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In order to ensure IB spec atomic correctness in atomic operations, if
HW is configured to host endianness, advertise IB_ATOMIC_HCA.  if not,
advertise IB_ATOMIC_NONE.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

HW is capable of 2 requestor endianness modes for standard 8 Bytes
atomic: BE (0x0) and host endianness (0x1). Read the supported modes
from hca atomic capabilities and configure HW to host endianness mode if
supported.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add support of cross-channel functionality to mlx5
driver. This includes ability to ignore overrun for CQ
which intended for cross-channel, export device capability and
configure the QP to be sync master/slave queues.

The cross-channel enabled QP supports combination of
three possible properties:
* WQE processing on the receive queue of this QP
* WQE processing on the send queue of this QP
* WQE are supported on the send queue
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The cross-channel feature allows to execute WQEs that involve
synchronization of I/O operations’ on different QPs.

This capability enables to program complex flows with a single
function call, hereby significantly reducing overhead associated
with I/O processing.

Cross-channel operations support is indicated by HCA capability
information.

The queue pairs can be configured to work as a “sync master queue”
or “sync slave queues”.

The added flags are:

1. Device capability flag IB_DEVICE_CROSS_CHANNEL for the
   devices that can perform cross-channel operations.

2. CQ property flag IB_CQ_FLAGS_IGNORE_OVERRUN to disable CQ overrun
   check. This check is useless in cross-channel scenario.

3. QP property flags to indicate if queues are slave or master:
   * IB_QP_CREATE_MANAGED_SEND indicates that posted send work requests
     will not be executed immediately and requires enabling.
   * IB_QP_CREATE_MANAGED_RECV indicates that posted receive work
     requests will not be executed immediately and requires enabling.
   * IB_QP_CREATE_CROSS_CHANNEL declares the QP to work in cross-channel
     mode. If IB_QP_CREATE_MANAGED_SEND and IB_QP_CREATE_MANAGED_RECV are
     not provided, this QP will be sync master queue, else it will be sync
     slave.
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Modify enum ib_device_cap_flags such that other patches which add new
enum values pass strict checkpatch.pl checks.
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Pass hca_core_clock_offset to user-space is mandatory in order to
let the user-space read the free-running clock register from the
right offset in the memory mapped page.
Passing this value is done by changing the vendor's command
and response of init_ucontext to be in extensible form.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Reviewed-by: NMoshe Lazer <moshel@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Reporting the hca_core_clock (in kHZ) and the timestamp_mask in
query_device extended verb. timestamp_mask is used by users in order
to know what is the valid range of the raw timestamps, while
hca_core_clock reports the clock frequency that is used for
timestamps.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Reviewed-by: NMoshe Lazer <moshel@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Extending core and vendor verb commands require us to check that the
unknown part of the user's given command is all zeros.
Adding ib_is_udata_cleared in order to do so.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Reviewed-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Check if the extended counters are available and if so
create the proper extended and additional counters.
Signed-off-by: NChristoph Lameter <cl@linux.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NHal Rosenstock <hal@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBart Van Assche <bvanassche@sandisk.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core]
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Remove the unused ib_allow_mw and ib_bind_mw functions, remove the
unused IB_WR_BIND_MW and IB_WC_BIND_MW opcodes and move ib_dealloc_mw
into the uverbs module.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core]
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

We have stopped using phys MRs in the kernel a while ago, so let's
remove all the cruft used to implement them.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core]
Reviewed-By: Devesh Sharma<devesh.sharma@avagotech.com> [ocrdma]
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This functionality has no users and was only supported by the staged out
EHCA driver.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core]
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Just IB_DEVICE_LOCAL_DMA_LKEY and IB_DEVICE_MEM_MGT_EXTENSIONS for now
as I'm most familar with those.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-By: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Set the address handle and QP address path fields according to the
link layer type (IB/Eth).
Signed-off-by: NAchiad Shochat <achiad@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

These callbacks write into the mlx5 RoCE address table.
Upon del_gid we write a zero'd GID.
Signed-off-by: NAchiad Shochat <achiad@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When handling a responder completion, if the link layer is Ethernet,
set the work completion network_hdr_type field according to CQE's
info and the IB_WC_WITH_NETWORK_HDR_TYPE flag.
Signed-off-by: NAchiad Shochat <achiad@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>