Even with the oops fixed by a previous patch, the system still fails to
kexec, due to a stuck chained interrupt locking the system.  We must
disable the child interrupts prior to setting up the irq chip to ensure
we don't get stuck here.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

The IPU code was installing its chained interrupt handler (which enables
the interrupt) before it was setting its data, which provokes an oops on
kexec.  Fix this by converting to irq_set_chained_handler_and_data().

[drm] Initialized drm 1.1.0 20060810
imx-drm display-subsystem: parent device of /soc/aips-bus@02000000/ldb@020e0008/lvds-channel@1 is not available
imx-drm display-subsystem: parent device of /soc/aips-bus@02000000/ldb@020e0008/lvds-channel@1 is not available
Unable to handle kernel NULL pointer dereference at virtual address 00000070
pgd = c0004000
[00000070] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.1.0-rc6+ #1693
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
task: d74c0000 ti: d74aa000 task.ti: d74aa000
PC is at ipu_irq_handle+0x28/0xd8
LR is at ipu_irq_handler+0x6c/0xc0
pc : [<c03c56d8>]    lr : [<c03c58a4>]    psr: 200001d3
sp : d74abbd0  ip : d74abc00  fp : d74abbfc
r10: 000001e0  r9 : c0085154  r8 : 00000009
r7 : 00000000  r6 : 00000000  r5 : d74abc04  r4 : c0a6b6a8
r3 : 00000000  r2 : 00000009  r1 : d74abc04  r0 : 00000000
Flags: nzCv  IRQs off  FIQs off  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c5387d  Table: 10004059  DAC: 00000015
Process swapper/0 (pid: 1, stack limit = 0xd74aa210)
Stack: (0xd74abbd0 to 0xd74ac000)
Backtrace:
[<c03c56b0>] (ipu_irq_handle) from [<c03c58a4>] (ipu_irq_handler+0x6c/0xc0)
[<c03c5838>] (ipu_irq_handler) from [<c0080154>] (generic_handle_irq+0x28/0x38)
[<c008012c>] (generic_handle_irq) from [<c0080288>] (__handle_domain_irq+0x5c/0xb8)
[<c008022c>] (__handle_domain_irq) from [<c0009428>] (gic_handle_irq+0x28/0x68)
[<c0009400>] (gic_handle_irq) from [<c0013dc4>] (__irq_svc+0x44/0x5c)
[<c07638fc>] (_raw_spin_unlock_irqrestore) from [<c00803bc>] (__irq_put_desc_unlock+0x1c/0x40)
[<c00803a0>] (__irq_put_desc_unlock) from [<c00841f4>] (__irq_set_handler+0x54/0x5c)
[<c00841a0>] (__irq_set_handler) from [<c03c5f48>] (ipu_probe+0x29c/0x708)
[<c03c5cac>] (ipu_probe) from [<c03d3848>] (platform_drv_probe+0x50/0xac)
[<c03d37f8>] (platform_drv_probe) from [<c03d1f3c>] (driver_probe_device+0x1d4/0x278)
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/E1Z4z02-0002SI-Br@rmk-PC.arm.linux.org.ukSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

The IC register offset is at +0x20000 relative to the control module
registers on all IPUv3 versions. This patch fixes wrong values for
i.MX51 and i.MX53.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

Adds ipu_dump() which dumps IPU register state to debug.
Signed-off-by: NSteve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

Adds support for the following planar and partial-planar formats:

YUV422
NV12
NV16
Signed-off-by: NDmitry Eremin-Solenikov <dmitry_eremin@mentor.com>
Signed-off-by: NMohsin Kazmi <mohsin_kazmi@mentor.com>
Signed-off-by: NSteve Longerbeam <steve_longerbeam@mentor.com>

Unified base offset and Y plane offset into a single variable,
moved all ipu_cpmem_set_buffer calls to a single location.
Removed NV21 and NV61 for now. The IDMAC doesn't understand U/V
order for chroma interleaved formats, so we'd need to work around
this by implenting U/V switching via the CSC unit.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

Adds ipu_idmac_lock_enable(), which enables or disables channel
burst locking.
Signed-off-by: NSteve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

Adds the function ipu_idmac_enable_watermark(), which enables or disables
watermarking in the IDMAC channel. Enabling watermarking can increase a
channel's AXI bus arbitration priority.
Signed-off-by: NSteve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

Adds ipu_stride_to_bytes(), which converts a pixel stride to bytes,
suitable for passing to cpmem.
Signed-off-by: NSteve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

Adds __ipu_idmac_reset_current_buffer() that resets a channel's
internal current buffer pointer so that transfers start from buffer
0 on the next channel enable.

This operation is required for channel linking to work correctly,
for instance video capture pipelines that carry out image rotations
will fail after the first streaming unless this function is called
for each channel before re-enabling the channels.
Signed-off-by: NSteve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

Add the reverse of ipu_idmac_select_buffer(), that is, clear a buffer
ready status in a channel.
Signed-off-by: NSteve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

Add ipu_idmac_buffer_is_ready(), returns true if the given buffer in
the given channel is set ready (owned by IPU), or false if not ready
(owned by CPU core).

Support has been added for third buffer, there is no support yet for
triple-buffering in idmac channels, but this function checks
buffer-ready for third buffer in case this support is added later.
Signed-off-by: NSteve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

Add simple helper function returning true if passed pixel format is one
of supported planar ones.
Signed-off-by: NDmitry Eremin-Solenikov <dmitry_eremin@mentor.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

Add two functions:

- ipu_degrees_to_rot_mode(): converts a degrees, hflip, and vflip setting
  to an IPU rotation mode.
- ipu_rot_mode_to_degrees(): converts an IPU rotation mode with given hflip
  and vflip settings to degrees.
Signed-off-by: NSteve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

Add ipu_mbus_code_to_colorspace() to find ipu_color_space from a
media bus pixel format code.
Signed-off-by: NSteve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

Move the SMFC module enable/disable helpers into the ipu-smfc submodule.
Signed-off-by: NSteve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

Adds the Image Converter (IC) unit.
Signed-off-by: NSteve Longerbeam <steve_longerbeam@mentor.com>

Condensed the three CSC setup functions into a single one that
uses static tables to set up the CSC task parameters.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

Adds the Camera Sensor Interface (CSI) unit required for video capture.
Signed-off-by: NSteve Longerbeam <steve_longerbeam@mentor.com>

Removed the unused clk_get_rate in ipu_csi_init_interface and the
ipu_csi_ccir_err_detection_enable/disable functions.
Checkpatch cleanup.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

Avoid returning an uninitialized variable in the error path.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

Adds two new functions, ipu_set_csi_src_mux() and ipu_set_ic_src_mux(),
that select the inputs to the CSI and IC respectively. Both muxes are
programmed in the IPU_CONF register.
Signed-off-by: NSteve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

Move channel parameter memory setup functions and macros into a new
submodule ipu-cpmem. In the process, cleanup arguments to the functions
to take a channel pointer instead of a pointer into cpmem for that
channel. That allows the structure of the parameter memory to be
private to ipu-cpmem.c.
Signed-off-by: NSteve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

This patch registers the two CSI platform devices per IPU.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

IPU_CONF_..._EN bits are implementation details, not to be made public.
Add wrappers around ipu_module_enable/disable, so the CSI V4L2 driver
can enable/disable the CSI and SMFC modules.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

This function returns the currently active buffer (0 or 1)
of a double buffered IDMAC channel. It is to be used by the
CSI driver.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

The Sensor Multi Fifo Controller (SMFC) is used as a buffer between
the two CSIs (writing simultaneously) and up to four IDMAC channels.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

The i.MX Image Processing Unit (IPU) contains a number of image processing
blocks that sit right in the middle between DRM and V4L2. Some of the modules,
such as Display Controller, Processor, and Interface (DC, DP, DI) or CMOS
Sensor Interface (CSI) and their FIFOs could be assigned to either framework,
but others, such as the dma controller (IDMAC) and image converter (IC) can
be used by both.
The IPUv3 core driver provides an internal API to access the modules, to be
used by both DRM and V4L2 IPUv3 drivers.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This allows to request the DC related interrupts.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NAntoine Schweitzer-Chaput <antoine@schweitzer-chaput.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Clean up the IPUv3 CRTC device registration; we don't need a separate
function just to call platform_device_register_data(), and we don't
need the return value converted at all.

Update the IPU client id under a mutex, so that parallel probing
doesn't race.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>.  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In case of error, the function platform_device_register_data() returns
ERR_PTR() and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes coccinelle errors for bool variables
initialized with 1 or 0 instead of true and false.
Signed-off-by: NValentina Manea <valentina.manea.m@gmail.com>
Reviewed-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds support for a drm overlay plane on DI0 using the DP.
In principle, the overlay plane could also be used on DI1, but to switch
the overlay plane between display interfaces, the base planes would have
to be exchanged transparently while both display interfaces are inactive.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently we wait for a channel until it's idle before actually
disabling it. This is not needed for all channels though, so make
waiting for idle a separate function and call it where necessary.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The drm fourccs define formats not available as video4linux pixel formats,
such as DRM_FORMAT_BGR565, or the DRM_FORMAT_RGBX/BGRX variants.
Also, contrary to the v4l2 formats, the drm formats are well defined.

This patch also fixes the BGRA32 and RGB/RGB24 internal formats to use a
common internal representation.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add MODULE_ALIAS, so that auto module loading can work.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

clk_prepare_enable() may fail, so let's check its return value and propagate it
in the case of error.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Instead of jumping to goto labels, just return the error code directly.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>