- add SPDX header;
- add a document title;
- mark lists as such;
- mark tables as such;
- mark code blocks and literals as such;
- use the right horizontal tag markup;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- add SPDX header;
- adjust title markup;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- add SPDX header;
- use copyright symbol;
- adjust titles and chapters, adding proper markups;
- comment out text-only TOC from html/pdf output;
- mark code blocks and literals as such;
- add notes markups;
- mark tables as such;
- mark lists as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- add SPDX header;
- use copyright symbol;
- adjust title and its markup;
- comment out text-only TOC from html/pdf output;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- add SPDX header;
- adjust titles and chapters, adding proper markups;
- mark code blocks and literals as such;
- mark tables as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- add SPDX header;
- add a document title;
- mark code blocks and literals as such;
- mark tables as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- add SPDX header;
- adjust titles and chapters, adding proper markups;
- mark code blocks and literals as such;
- add notes markups;
- mark tables as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- add SPDX header;
- use copyright symbol;
- adjust titles and chapters, adding proper markups;
- mark tables as such;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Not much to be done here:

- add SPDX header;
- add a document title;
- add a chapter's markup;
- add to networking/index.rst.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- add SPDX header;
- add a document title;
- adjust titles and chapters, adding proper markups;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- add SPDX header;
- adjust title markup;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- add SPDX header;
- mark code blocks and literals as such;
- mark tables as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Not much to be done here:
- add SPDX header;
- add a document title;
- add to networking/index.rst.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Not much to be done here:

- add SPDX header;
- adjust title markup;
- remove a tail whitespace;
- add to networking/index.rst.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- add SPDX header;
- adjust title markup;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- add SPDX header;
- adjust title markup;
- Add a subtitle for the first section;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- add SPDX header;
- adjust titles and chapters, adding proper markups;
- mark lists as such;
- mark tables as such;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- add SPDX header;
- use copyright symbol;
- adjust titles and chapters, adding proper markups;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove a not needed parameter in rtl8169_set_magic_reg.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes coccicheck warnings:

 drivers/net/ethernet/huawei/hinic/hinic_hw_mbox.c:452:17-24: WARNING opportunity for kmemdup
 drivers/net/ethernet/huawei/hinic/hinic_hw_mbox.c:458:23-30: WARNING opportunity for kmemdup
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NZou Wei <zou_wei@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix sparse warnings:

drivers/net/ethernet/huawei/hinic/hinic_hw_mbox.c:601:6: warning: symbol 'dump_mox_reg' was not declared. Should it be static?
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NZheng Bin <zhengbin13@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This PHY has two PHY IDs depending on its mode. Adjust the mask so that
it includes both IDs.
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The lower three bits of the phy_id specifies the chip stepping. The
workaround is specifically for the B0 stepping. Apply it only on these
chips.
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Broadcom defines the bits for this PHY as follows:
  { oui[24:3], model[6:0], revision[2:0] }

Thus we have to mask the lower three bits only.

Fixes: 6937602e ("net: phy: add Broadcom BCM54140 support")
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set the .soft_reset() op to be sure there will be a reset even if there
is no hardware reset line registered.
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The AR8031 and AR8035 support the link speed downshift. Add driver
support for it. One peculiarity of these PHYs is that it needs a
software reset after changing the setting, thus add the .soft_reset()
op and do a phy_init_hw() if necessary.

This was tested on a custom board with the AR8031.
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RTL8125 supports the same PME_SIGNAL handling as all later RTL8168
chip variants.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sync definition of max jumbo packet size with vendor driver and reserve
22 bytes for VLAN ethernet header plus checksum.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The vendor driver does upon failing to read a valid MAC address from
EEPROM write the netdev's address back to EEPROM and invoking a EEPROM
reload operation. Based on this we can implement the ethtool_ops
set_eeprom and provide the means to populate the EEPROM from within
Linux.

It's worth noting that ax88179_get_eeprom() will return some default
data unless the content of the EEPROM is deemed "complete", so until the
EEPROM is fully populated (e.g. by running ethtool -e | ethtool -E)
data written with ax88179_set_eeprom() will appear not to stick.

The implementation is based on asix_set_eeprom(), from asix_common.c
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix to return negative error code -ENOMEM from the error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case of error, the function devm_ioremap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should
be replaced with NULL test.
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Acked-by: NEsben Haabendal <esben@geanix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 29ae6bd1.

The commit breaks ethernet function on i.MX6SX, i.MX7D, i.MX8MM,
i.MX8MQ, and i.MX8QXP platforms. Boot yocto system by NFS mounting
rootfs will be failed with the commit.
Signed-off-by: NFugang Duan <fugang.duan@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: b7370112 ("lpc32xx: Added ethernet driver")
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Acked-by: NVladimir Zapolskiy <vz@mleia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix to return a error code from the error handling case
instead of 0, as done elsewhere in this function.

Fixes: 31ad4e4e ("ice: Allocate flow profile")
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix to return negative error code -ENOMEM from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 5a6d7c9d ("octeontx2-pf: Mailbox communication with AF")
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes coccicheck warning:
./drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:2110:30-31:
WARNING comparing pointer to 0

Avoid pointer type value compared to 0.
Signed-off-by: NAishwarya Ramakrishnan <aishwaryarj100@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Output PPS signal on FIPER2 (Fixed Period Interval Pulse) in default
which is more desired by user.
Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Johannes Berg says:

====================
netlink validation improvements/refactoring

Alright, this is the resend now, really just changing

 - the WARN_ON_ONCE() as spotted by Jakub;
 - mark the export patch no longer RFC.
   I wasn't actually sure if you meant this one too, and I really
   should dig out and polish the code that showed it in userspace.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add, and use in generic netlink, helpers to dump out a netlink
policy to userspace, including all the range validation data,
nested policies etc.

This lets userspace discover what the kernel understands.

For families/commands other than generic netlink, the helpers
need to be used directly in an appropriate command, or we can
add some infrastructure (a new netlink family) that those can
register their policies with for introspection. I'm not that
familiar with non-generic netlink, so that's left out for now.

The data exposed to userspace also includes min and max length
for binary/string data, I've done that instead of letting the
userspace tools figure out whether min/max is intended based
on the type so that we can extend this later in the kernel, we
might want to just use the range data for example.

Because of this, I opted to not directly expose the NLA_*
values, even if some of them are already exposed via BPF, as
with min/max length we don't need to have different types here
for NLA_BINARY/NLA_MIN_LEN/NLA_EXACT_LEN, we just make them
all NL_ATTR_TYPE_BINARY with min/max length optionally set.

Similarly, we don't really need NLA_MSECS, and perhaps can
remove it in the future - but not if we encode it into the
userspace API now. It gets mapped to NL_ATTR_TYPE_U64 here.

Note that the exposing here corresponds to the strict policy
interpretation, and NLA_UNSPEC items are omitted entirely.
To get those, change them to NLA_MIN_LEN which behaves in
exactly the same way, but is exposed.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add helpers to get the policy's signed/unsigned range
validation data.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>