Since dev->power.should_wakeup bit is used by the PCI core to
decide whether the device should wake up the system from sleep
states, set/unset this bit whenever WOL is enabled/disabled using
igb_set_wol().  Accordingly, use device_can_wakeup() for checking
if wake-up is supported by the device.
Signed-off-by: N"Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since dev->power.should_wakeup bit is used by the PCI core to
decide whether the device should wake up the system from sleep
states, set/unset this bit whenever WOL is enabled/disabled using
e1000_set_wol().  Accordingly, use device_can_wakeup() for checking
if wake-up is supported by the device.
Signed-off-by: N"Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since dev->power.should_wakeup bit is used by the PCI core to
decide whether the device should wake up the system from sleep
states, set/unset this bit whenever WOL is enabled/disabled using
e1000_set_wol().  Accordingly, use device_can_wakeup() for checking
if wake-up is supported by the device.
Signed-off-by: N"Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJoey Zhuo <joeyzhuo@via.com.tw>
Acked-by: NFrancois Romieu <romieu@fr.zoreil.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch will add support for the Marvell 88E1118 PHY which supports gigabit ethernet among other things.
Signed-off-by: NRon Madrid <ron_madrid@sbcglobal.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Before the change the driver reported the same pause parameters
for all the ports, even only one of them was modified.
Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 46abc021 ("phylib: give mdio
buses a device tree presence") added a call to device_unregister() in
a situation where the caller did not intend for the device to be
freed yet, but apart from just unregistering the device from the
system, device_unregister() does an additional put_device() that is
intended to free it.

The right function to use in this situation is device_del(), which
unregisters the device from the system like device_unregister() does,
but without dropping the reference count an additional time.

Bug report from Bryan Wu <cooloney@kernel.org>.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Tested-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Of the various WOL options provided in include/linux/ethtool.h, the
L1 NIC supports only magic packet.  Remove all options except magic
packet from the atl1 driver.
Signed-off-by: NJay Cliburn <jcliburn@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Inverting the crc after calling ether_crc_le() is unnecessary and breaks
multicast. Remove it.
Tested-by: NDavid Madore <david.madore@ens.fr>
Signed-off-by: NJay Cliburn <jcliburn@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

We weren't unmapping DMA memory, which will break when gianfar gets used
on systems with more than 32-bits of memory.  Also, it's just plain wrong.
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

p_{tx,rx}_fw_statistics_pram are special: they're available only when
a device is open. If the device is closed, we should just fill the data
with zeroes.

Fixes the following oops:

root@b1:~# ifconfig eth1 down
root@b1:~# ethtool -S eth1
Unable to handle kernel paging request for data at address 0x00000000
Faulting instruction address: 0xc01e1dcc
Oops: Kernel access of bad area, sig: 11 [#1]
[...]
NIP [c01e1dcc] uec_get_ethtool_stats+0x98/0x124
LR [c0287cc8] ethtool_get_stats+0xfc/0x23c
Call Trace:
[cfaadde0] [c0287ca8] ethtool_get_stats+0xdc/0x23c (unreliable)
[cfaade20] [c0288340] dev_ethtool+0x2fc/0x588
[cfaade50] [c0285648] dev_ioctl+0x290/0x33c
[cfaadea0] [c0272238] sock_ioctl+0x80/0x2ec
[cfaadec0] [c00b5ae4] vfs_ioctl+0x40/0xc0
[cfaadee0] [c00b5fa8] do_vfs_ioctl+0x78/0x20c
[cfaadf10] [c00b617c] sys_ioctl+0x40/0x74
[cfaadf40] [c00142d8] ret_from_syscall+0x0/0x38
[...]
---[ end trace b941007b2dfb9759 ]---
Segmentation fault

p.s. While at it, also remove u64 casts, they aren't needed.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This is the next page of the scm recursion story (the commit 
f8d570a4 net: Fix recursive descent in __scm_destroy()).

In function scm_fp_dup(), the INIT_LIST_HEAD(&fpl->list) of newly
created fpl is done *before* the subsequent memcpy from the old 
structure and thus the freshly initialized list is overwritten.

But that's OK, since this initialization is not required at all,
since the fpl->list is list_add-ed at the destruction time in any
case (and is unused in other code), so I propose to drop both
initializations, rather than moving it after the memcpy.

Please, correct me if I miss something significant.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This driver is pretty mature, and the worst of the known
problems has been fixed (the 32-bit failures due to readq
implementation).

So let's finally give it a version of 1.0
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support for the Sun CP3260 ATCA blade which is
a N2 based ATCA blade with 2 NIU ports. The NIU ports do not
have on-board PHY.
Signed-off-by: NSantwona Behera <santwona.behera@sun.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

fix this warning:

  net/bluetooth/af_bluetooth.c:60: warning: ‘bt_key_strings’ defined but not used
  net/bluetooth/af_bluetooth.c:71: warning: ‘bt_slock_key_strings’ defined but not used

this is a lockdep macro problem in the !LOCKDEP case.

We cannot convert it to an inline because the macro works on multiple types,
but we can mark the parameter used.

[ also clean up a misaligned tab in sock_lock_init_class_and_name() ]

[ also remove #ifdefs from around af_family_clock_key strings - which
  were certainly added to get rid of the ugly build warnings. ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make 9p's RDMA option depend on INET since it uses Infiniband rdma_*
functions and that code depends on INET.  Otherwise 9p can try to
use symbols which don't exist.

ERROR: "rdma_destroy_id" [net/9p/9pnet_rdma.ko] undefined!
ERROR: "rdma_connect" [net/9p/9pnet_rdma.ko] undefined!
ERROR: "rdma_create_id" [net/9p/9pnet_rdma.ko] undefined!
ERROR: "rdma_create_qp" [net/9p/9pnet_rdma.ko] undefined!
ERROR: "rdma_resolve_route" [net/9p/9pnet_rdma.ko] undefined!
ERROR: "rdma_disconnect" [net/9p/9pnet_rdma.ko] undefined!
ERROR: "rdma_resolve_addr" [net/9p/9pnet_rdma.ko] undefined!

I used an if/endif block so that the menu items would remain
presented together.

Also correct an article adjective.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Failure to pass netns_ok check is SILENT, except some MIB counter is
incremented somewhere.

And adding "netns_ok = 1" (after long head-scratching session) is
usually the last step in making some protocol netns-ready...
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes two bugs:

1. setsockopt() of anything but a Type 2 routing header should return
EINVAL instead of EPERM.  Noticed by Shan Wei
(shanwei@cn.fujitsu.com).

2. setsockopt()/sendmsg() of a Type 2 routing header with invalid
length or segments should return EINVAL.  These values are statically
fixed in RFC 3775, unlike the variable Type 0 was.
Signed-off-by: NBrian Haley <brian.haley@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix bnx2 so that netpoll works properly.  Specifically:

1) Fix parameters to bnx2_interrupt to be a struct bnx2_napi rather than a
struct net_device

2) Fix poll_controller method to check every queue in the rx case so frames
aren't missed
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes a TX hang reported by Jesper Dangaard Brouer.

When an architecutre cannot provide a fully functional
64-bit atomic readq/writeq, the driver must implement
it's own.  This is because only the driver can say whether
doing something like using two 32-bit reads to implement
the full 64-bit read will actually work properly.

In particular one of the issues is whether the top 32-bits
or the bottom 32-bits of the 64-bit register should be read
first.  There could be side effects, and in fact that is
exactly the problem here.

The TX_CS register has counters in the upper 32-bits and
state bits in the lower 32-bits.  A read clears the state
bits.

We would read the counter half before the state bit half.
That first read would clear the state bits, and then the
driver thinks that no interrupts are pending because the
interrupt indication state bits are seen clear every time.

Fix this by reading the bottom half before the upper half.
Tested-by: NJesper Dangaard Brouer <jdb@comx.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Like mac80211 did, this driver makes 'clever' use of skb->cb to pass
information along with an skb as it is requeued from the virtual device
to the physical wireless device.  Unfortunately, that trick no longer
works...

Unlike mac80211, code complexity and driver apathy makes this hack
the best option we have in the short run.  Hopefully someone will
eventually be motivated to code a proper fix before all the effected
hardware dies.

(Above text by me.  Johannes officially disavows all knowledge of this
hack. -- JWL)
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Cc: stable@kernel.org
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

the Sitecom 0001 v4 with product id 0x0df6:0028, uses Realtek's
RTL8187B and work fine with new 2.6.27 driver.
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The ieee80211_notify_mac() function uses ieee80211_sta_req_auth() which
in turn calls ieee80211_set_disassoc() which calls a few functions that
need to be able to sleep, so ieee80211_notify_mac() cannot use RCU
locking for the interface list and must use rtnl locking instead.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NIvan Kuten <ivan.kuten@promwad.com>
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

In __sock_recv_timestamp() the additional SCM_TIMESTAMP[NS] is used. This
has the same value as SO_TIMESTAMP[NS], so this is a purely cosmetic change.
Signed-off-by: NPatrick Ohly <patrick.ohly@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes a minor bug in tcp_htcp.c which has been
highlighted by Lachlan Andrew and Lawrence Stewart.  Currently, the
time since the last congestion event, which is stored in variable
last_cong, is reset whenever there is a state change into
TCP_CA_Open.  This includes transitions of the type
TCP_CA_Open->TCP_CA_Disorder->TCP_CA_Open which are not associated
with backoff of cwnd.  The patch changes last_cong to be updated
only on transitions into TCP_CA_Open that occur after experiencing
the congestion-related states TCP_CA_Loss, TCP_CA_Recovery,
TCP_CA_CWR.
Signed-off-by: NDoug Leith <doug.leith@nuim.ie>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  timers: handle HRTIMER_CB_IRQSAFE_UNLOCKED correctly from softirq context
  nohz: disable tick_nohz_kick_tick() for now
  irq: call __irq_enter() before calling the tick_idle_check
  x86: HPET: enter hpet_interrupt_handler with interrupts disabled
  x86: HPET: read from HPET_Tn_CMP() not HPET_T0_CMP
  x86: HPET: convert WARN_ON to WARN_ON_ONCE

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: release buddies on yield
  fix for account_group_exec_runtime(), make sure ->signal can't be freed under rq->lock
  sched: clean up debug info

Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  ring-buffer: prevent infinite looping on time stamping
  ftrace: disable tracing on resize
  ftrace: fix breakage in bin_fmt results
  ftrace: ftrace.txt version update
  ftrace: update txt document

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  [XFS] XFS: Check for valid transaction headers in recovery
  [XFS] handle memory allocation failures during log initialisation
  [XFS] Account for allocated blocks when expanding directories
  [XFS] Wait for all I/O on truncate to zero file size
  [XFS] Fix use-after-free with log and quotas

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (21 commits)
  ocfs2: Check search result in ocfs2_xattr_block_get()
  ocfs2: fix printk related build warnings in xattr.c
  ocfs2: truncate outstanding block after direct io failure
  ocfs2/xattr: Proper hash collision handle in bucket division
  ocfs2: return 0 in page_mkwrite to let VFS retry.
  ocfs2: Set journal descriptor to NULL after journal shutdown
  ocfs2: Fix check of return value of ocfs2_start_trans() in xattr.c.
  ocfs2: Let inode be really deleted when ocfs2_mknod_locked() fails
  ocfs2: Fix checking of return value of new_inode()
  ocfs2: Fix check of return value of ocfs2_start_trans()
  ocfs2: Fix some typos in xattr annotations.
  ocfs2: Remove unused ocfs2_restore_xattr_block().
  ocfs2: Don't repeat ocfs2_xattr_block_find()
  ocfs2: Specify appropriate journal access for new xattr buckets.
  ocfs2: Check errors from ocfs2_xattr_update_xattr_search()
  ocfs2: Don't return -EFAULT from a corrupt xattr entry.
  ocfs2: Check xattr block signatures properly.
  ocfs2: add handler_map array bounds checking
  ocfs2: remove duplicate definition in xattr
  ocfs2: fix function declaration and definition in xattr
  ...

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (35 commits)
  V4L/DVB (9516): cx18: Move DVB buffer transfer handling from irq handler to work_queue
  V4L/DVB (9557): gspca: Small changes for the sensor HV7131B in zc3xx.
  V4L/DVB (9556): gspca: Bad init sequence for sensor HV7131B in zc3xx.
  V4L/DVB (9549): gspca: Fix a typo in one of gspca chips name.
  V4L/DVB (9515): cx18: Use correct Mailbox IRQ Ack values and misc IRQ handling cleanup
  V4L/DVB (9493): kconfig patch
  V4L/DVB (9527): af9015: fix compile warnings
  V4L/DVB (9524): af9013: fix bug in status reading
  V4L/DVB (9511): cx18: Mark CX18_CPU_DE_RELEASE_MDL as a slow API call
  V4L/DVB (9510): cx18: Fix write retries for registers that always change - part 2.
  V4L/DVB (9506): ivtv/cx18: fix test whether modules should be loaded or not.
  V4L/DVB (9499): cx88-mpeg: final fix for analogue only compilation + de-alloc fix
  V4L/DVB (9496): cx88-blackbird: bugfix: cx88-blackbird-mpeg-users
  V4L/DVB (9495): cx88-blackbird: bugfix: cx88-blackbird-poll-fix
  V4L/DVB (9494): anysee: initialize anysee_usb_mutex statically
  V4L/DVB (9492): unplug oops from dvb_frontend_init...
  V4L/DVB (9486): ivtv/ivtvfb: no longer experimental
  V4L/DVB (9485): ivtv: remove incorrect V4L1 & tvaudio dependency
  V4L/DVB (9482): Documentation, especially regarding audio and informational links
  V4L/DVB (9475): cx18: Disable write retries for registers that always change - part 1.
  ...

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  powerpc: Update desktop/server defconfigs
  powerpc: Fix msr check in compat_sys_swapcontext
  powerpc: Repair device bindings documentation
  powerpc: Updated Freescale PPC related defconfigs
  powerpc: Update QE/CPM2 usb_ctlr structures for USB support
  powerpc/86xx: Correct SOC bus-frequency in GE Fanuc SBC610 DTS
  powerpc: Fix Book-E watchdog timer interval setting
  powerpc/fsl-booke: Fix synchronization bug w/local tlb invalidates

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/i915: Move legacy breadcrumb out of the reserved status page area
  drm/i915: Filter pci devices based on PCI_CLASS_DISPLAY_VGA
  drm/radeon: map registers at load time
  drm: Remove infrastructure for supporting i915's vblank swapping.
  i915: Remove racy delayed vblank swap ioctl.
  i915: Don't whine when pci_enable_msi() fails.
  i915: Don't attempt to short-circuit object_wait_rendering by checking domains.
  i915: Clean up sarea pointers on leavevt
  i915: Save/restore MCHBAR_RENDER_STANDBY on GM965/GM45

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: fix last_reset timestamp handling
  libata: Avoid overflow in ata_tf_read_block() when tf->hba_lbal > 127
  [libata] pata_pcmcia: another memory card support
  [libata] pata_sch: notice attached slave devices
  [libata] pata_cs553*.c: cleanup kernel-doc