This patch adds supports for setting VF trust by host. If specified
VF is trusted, then it can enable promisc(include allmulti mode).
If a trusted VF enabled promisc, and being untrusted, host will
disable promisc mode for this VF.

For VF will update its promisc mode from set_rx_mode now, so it's
unnecessary to set broadcst promisc mode when initialization or
reset.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

This patch adds support for spoof check configuration for VFs.
When it is enabled, "spoof checking" is done for both mac address
and VLAN. For each VF, the HW ensures that the source MAC address
(or VLAN) of every outgoing packet exists in the MAC-list (or
VLAN-list) configured for RX filtering for that VF. If not,
the packet is dropped.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

This patch adds support to configure VF link properties.
The options are auto, enable, and disable. Even if the PF
is down, the communication between VFs will be normal
if the VFs are set to enable. The commands are as follows:

'ip link set <pf> vf <vf_id> state <auto|enable|disable>'
change the VF status

'ip link show'
show the setting status
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

syzbot reported a warning [1] that triggered after recent Jiri patch.

This exposes a bug that we hit already in the past (see commit
ff244c6b ("tun: handle register_netdevice() failures properly")
for details)

tun uses priv->destructor without an ndo_init() method.

register_netdevice() can return an error, but will
not call priv->destructor() in some cases. Jiri recent
patch added one more.

A long term fix would be to transfer the initialization
of what we destroy in ->destructor() in the ndo_init()

This looks a bit risky given the complexity of tun driver.

A simpler fix is to detect after the failed register_netdevice()
if the tun_free_netdev() function was called already.

[1]
ODEBUG: free active (active state 0) object type: timer_list hint: tun_flow_cleanup+0x0/0x280 drivers/net/tun.c:457
WARNING: CPU: 0 PID: 8653 at lib/debugobjects.c:481 debug_print_object+0x168/0x250 lib/debugobjects.c:481
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 8653 Comm: syz-executor976 Not tainted 5.4.0-rc1-next-20191004 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 panic+0x2dc/0x755 kernel/panic.c:220
 __warn.cold+0x2f/0x3c kernel/panic.c:581
 report_bug+0x289/0x300 lib/bug.c:195
 fixup_bug arch/x86/kernel/traps.c:174 [inline]
 fixup_bug arch/x86/kernel/traps.c:169 [inline]
 do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267
 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286
 invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1028
RIP: 0010:debug_print_object+0x168/0x250 lib/debugobjects.c:481
Code: dd 80 b9 e6 87 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 b5 00 00 00 48 8b 14 dd 80 b9 e6 87 48 c7 c7 e0 ae e6 87 e8 80 84 ff fd <0f> 0b 83 05 e3 ee 80 06 01 48 83 c4 20 5b 41 5c 41 5d 41 5e 5d c3
RSP: 0018:ffff888095997a28 EFLAGS: 00010082
RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff815cb526 RDI: ffffed1012b32f37
RBP: ffff888095997a68 R08: ffff8880a92ac580 R09: ffffed1015d04101
R10: ffffed1015d04100 R11: ffff8880ae820807 R12: 0000000000000001
R13: ffffffff88fb5340 R14: ffffffff81627110 R15: ffff8880aa41eab8
 __debug_check_no_obj_freed lib/debugobjects.c:963 [inline]
 debug_check_no_obj_freed+0x2d4/0x43f lib/debugobjects.c:994
 kfree+0xf8/0x2c0 mm/slab.c:3755
 kvfree+0x61/0x70 mm/util.c:593
 netdev_freemem net/core/dev.c:9384 [inline]
 free_netdev+0x39d/0x450 net/core/dev.c:9533
 tun_set_iff drivers/net/tun.c:2871 [inline]
 __tun_chr_ioctl+0x317b/0x3f30 drivers/net/tun.c:3075
 tun_chr_ioctl+0x2b/0x40 drivers/net/tun.c:3355
 vfs_ioctl fs/ioctl.c:47 [inline]
 file_ioctl fs/ioctl.c:539 [inline]
 do_vfs_ioctl+0xdb6/0x13e0 fs/ioctl.c:726
 ksys_ioctl+0xab/0xd0 fs/ioctl.c:743
 __do_sys_ioctl fs/ioctl.c:750 [inline]
 __se_sys_ioctl fs/ioctl.c:748 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:748
 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x441439
Code: e8 9c ae 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fff61c37438 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000441439
RDX: 0000000020000400 RSI: 00000000400454ca RDI: 0000000000000004
RBP: 00007fff61c37470 R08: 0000000000000001 R09: 0000000100000000
R10: 0000000000000000 R11: 0000000000000246 R12: ffffffffffffffff
R13: 0000000000000005 R14: 0000000000000000 R15: 0000000000000000
Kernel Offset: disabled
Rebooting in 86400 seconds..

Fixes: ff927412 ("net: introduce name_node struct to be used in hashlist")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

There is a spelling mistake in a NL_SET_ERR_MSG_MOD message. Fix it.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

Don't populate const arrays on the stack but instead make them
static. Makes the object code smaller by 1058 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  29879	   6144	      0	  36023	   8cb7	drivers/net/phy/mscc.o

After:
   text	   data	    bss	    dec	    hex	filename
  28437	   6528	      0	  34965	   8895	drivers/net/phy/mscc.o

(gcc version 9.2.1, amd64)
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

Don't populate the array exp_mask on the stack but instead make it
static. Makes the object code smaller by 224 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  77832	   2290	      0	  80122	  138fa	ethernet/netronome/nfp/bpf/jit.o

After:
   text	   data	    bss	    dec	    hex	filename
  77544	   2354	      0	  79898	  1381a	ethernet/netronome/nfp/bpf/jit.o

(gcc version 9.2.1, amd64)
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

Throughout the driver there are several places where we wait
indefinitely for DPIO portal commands to be executed, while
the portal returns a busy response code.

Even though in theory we are guaranteed the portals become
available eventually, in practice the QBMan hardware module
may become unresponsive in various corner cases.

Make sure we can never get stuck in an infinite while loop
by adding a retry counter for all portal commands.
Signed-off-by: NIoana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: NIoana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't print error message for a successful return value.

Fixes: d84c3a4d ("dpaa2-eth: Add new DPNI statistics counters")
Signed-off-by: NIoana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: NIoana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove one function call whose result was not used anywhere.
Signed-off-by: NIoana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: NIoana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't populate the array tick_array on the stack but instead make it
static. Makes the object code smaller by 29 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  19191	    432	      0	  19623	   4ca7	hisilicon/hns3/hns3pf/hclge_tm.o

After:
   text	   data	    bss	    dec	    hex	filename
  19098	    496	      0	  19594	   4c8a	hisilicon/hns3/hns3pf/hclge_tm.o

(gcc version 9.2.1, amd64)
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't populate the arrays port_map and sl_map on the stack but
instead make them static. Makes the object code smaller by 64 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  49575	   6872	     64	  56511	   dcbf	hisilicon/hns/hns_dsaf_main.o

After:
   text	   data	    bss	    dec	    hex	filename
  49350	   7032	     64	  56446	   dc7e	hisilicon/hns/hns_dsaf_main.o

(gcc version 9.2.1, amd64)
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set channels callback enables the user to change the count of queues
used by the driver using ethtool. We decided to currently support only
equal number of rx and tx queues, this might change in the future.

Also rename dev_up to dev_was_up in ena_update_queue_count() to make
it clearer.
Signed-off-by: NSameeh Jubran <sameehj@amazon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The number of queues can be derived using ethtool, no need to print
it in ena_probe()
Signed-off-by: NSameeh Jubran <sameehj@amazon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- Update ena_ethtool:ena_get_channels() to return adapter->max_io_queues
  so that ethtool -l returns the correct maximum queue number.

- Change the name of ena_calc_io_queue_num() to
  ena_calc_max_io_queue_num() as it returns the maximum number of io
  queues and actual number of queues can be smaller if changed
  by ethtool -L which is implemented in a later commit.

- Change variable name from io_queue_num to max_num_io_queues in
  ena_calc_max_io_queue_num() and ena_probe().

- Make all types of variables that convey the number and sizeof queues
  to be u32, for consistency with the API between the driver and the
  device.
Signed-off-by: NArthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: NSameeh Jubran <sameehj@amazon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since we use the same IRQ and NAPI to service RX and TX then we need to
use a combined channel instead of rx and tx channels.
Signed-off-by: NSameeh Jubran <sameehj@amazon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- Rename ena_calc_queue_size() to ena_calc_io_queue_size() for clarity
  and consistency
- Remove redundant number of io queues parameter in functions
  ena_enable_msix() and ena_enable_msix_and_set_admin_interrupts(),
  which already get adapter parameter, so use adapter->num_io_queues
  in the function instead.
- Use the local variable ena_dev instead of ctx->ena_dev in
  ena_calc_io_queue_size
- Fix multi row comment alignments
Signed-off-by: NArthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: NSameeh Jubran <sameehj@amazon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Most places in the code refer to the IO queues as io_queues and not
simply queues. Examples - max_io_queues_per_vf, ENA_MAX_NUM_IO_QUEUES,
ena_destroy_all_io_queues() etc..

We are also adding the new max_num_io_queues field to struct ena_adapter
in the following commit.

The changes included in this commit are:
struct ena_adapter->num_queues => struct ena_adapter->num_io_queues
Signed-off-by: NArthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: NSameeh Jubran <sameehj@amazon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Do simple dev_info devlink operation implementation which only fills up
the driver name.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

GMAC4+ cores support Layer 3 and Layer 4 filtering. Add the
corresponding callbacks in these cores.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add two new tests for VLAN Perfect Filtering. While at it, increase a
little bit the tests strings lenght so that we can have more descriptive
test names.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If VLAN Hash Filtering is not available we can fallback to perfect
filtering instead. Let's implement this in XGMAC and GMAC cores and let
the user use this filter.

VLAN VID=0 always passes filter so we check if more than 2 VLANs are
created and return proper error code if so because perfect filtering
only supports 1 VID at a time.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add validation for FW version in order to prevent driver initialization
in case FW version is older than expected. FW version validation is
necessary, because use of a new field 'num_of_modules' in MGPIR register
is not backward compatible. FW 'minor' and 'subminor' versions are
expected to be greater than or equal to 2000 and 1886, respectively.
Signed-off-by: NVadim Pasternak <vadimp@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add new API for FW "minor" and "subminor" version validation for
sharing it between "spectrum" and "minimal" drivers.
Use it in "spectrum" driver.
Signed-off-by: NVadim Pasternak <vadimp@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use new field "num_of_modules" of MGPIR register for "thermal" interface
in order to get the number of modules supported by system directly from
the system configuration, instead of getting it from port to module
mapping info.
Signed-off-by: NVadim Pasternak <vadimp@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use new field "num_of_modules" of MGPIR register for "hwmon" interface
in order to get the number of modules supported by system directly from
the system configuration, instead of getting it from port to module
mapping info.

Reading this info through MGPIR register is faster and does not depend
on possible dynamic re-configuration of ports.
In case of port dynamic re-configuration some modules can logically
"disappear" as a result of port split and un-spilt operations, which
can cause missing of some modules, in case this info is taken from port
to module mapping info.
Signed-off-by: NVadim Pasternak <vadimp@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Extend MGPIR - Management General Peripheral Information Register
with new field "num_of_modules" exposing the number of modules
supported by specific system.
Signed-off-by: NVadim Pasternak <vadimp@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add flag to disallow reload and another one that causes reload to
always fail.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When user does create new netdevsim instance using sysfs bus file,
create the devlink instance and related netdev instance in the namespace
of the caller.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add tracing of device-related interaction to aid performance
analysis, especially around resync:

 tls:tls_device_offload_set
 tls:tls_device_rx_resync_send
 tls:tls_device_rx_resync_nh_schedule
 tls:tls_device_rx_resync_nh_delay
 tls:tls_device_tx_resync_req
 tls:tls_device_tx_resync_send
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In ql_alloc_large_buffers, a new skb is allocated via netdev_alloc_skb.
This skb should be released if pci_dma_mapping_error fails.

Fixes: 0f8ab89e ("qla3xxx: Check return code from pci_map_single() in ql_release_to_lrg_buf_free_list(), ql_populate_free_queue(), ql_alloc_large_buffers(), and ql3xxx_send()")
Signed-off-by: NNavid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Read the PHY-specific status register for the current operating mode
(speed and duplex) of the PHY.  This register reflects the actual
mode that the PHY has resolved depending on either the advertisements
of autoneg is enabled, or the forced mode if autoneg is disabled.

This ensures that phylib's software state always tracks the hardware
state.

It seems both AR8033 (which uses the AR8031 ID) and AR8035 support
this status register.  AR8030 is not known at the present time.

This patch depends on "net: phy: extract pause mode" and "net: phy:
extract link partner advertisement reading".
Reported-by: Ntinywrkb <tinywrkb@gmail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: Ntinywrkb <tinywrkb@gmail.com>
Fixes: 5502b218 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status")
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Extract the update of phylib's software pause mode state from
genphy_read_status(), so that we can re-use this functionality with
PHYs that have alternative ways to read the negotiation results.
Tested-by: Ntinywrkb <tinywrkb@gmail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move reading the link partner advertisement out of genphy_read_status()
into its own separate function.  This will allow re-use of this code by
PHY drivers that are able to read the resolved status from the PHY.
Tested-by: Ntinywrkb <tinywrkb@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When userspace writes to the MII_ADVERTISE register, we update phylib's
advertising mask and trigger a renegotiation.  However, writing to the
MII_CTRL1000 register, which contains the gigabit advertisement, does
neither.  This can lead to phylib's copy of the advertisement becoming
de-synced with the values in the PHY register set, which can result in
incorrect negotiation resolution.

Fixes: 5502b218 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status")
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

mdio_device_reset() makes use of the atomic-pretending API flavor for
handling the PHY reset GPIO line.

I found no hint that mdio_device_reset() is called from atomic context
and indeed it uses usleep_range() since long time, so I would assume that
it is OK to sleep there.

This patch switch to gpiod_set_value_cansleep() in mdio_device_reset().
This is relevant if e.g. the PHY reset line is tied to a I2C GPIO
controller.

This has been tested on a ZynqMP board running an upstream 4.19 kernel and
then hand-ported on current kernel tree.
Signed-off-by: NAndrea Merello <andrea.merello@gmail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

r8152 may fail to establish network connection after resume from system
suspend.

If the USB port connects to r8152 lost its power during system suspend,
the MAC address was written before is lost. The reason is that The MAC
address doesn't get written again in its reset_resume callback.

So let's set MAC address again in reset_resume callback. Also remove
unnecessary lock as no other locking attempt will happen during
reset_resume.
Signed-off-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix sparse warnings:

drivers/net/dsa/sja1105/sja1105_spi.c:159:5: warning: symbol 'sja1105_xfer_long_buf' was not declared. Should it be static?
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: Nzhengbin <zhengbin13@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Amazingly, of all features, this does not require a switch reset.

Tested with:

tc qdisc add dev swp2 clsact
tc filter add dev swp2 ingress matchall skip_sw \
	action mirred egress mirror dev swp3
tc filter show dev swp2 ingress
tc filter del dev swp2 ingress pref 49152
Signed-off-by: NVladimir Oltean <olteanv@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>