Convert the AVX and AVX2 implementations of Serpent from the
(deprecated) ablkcipher and blkcipher interfaces over to the skcipher
interface.  Note that this includes replacing the use of ablk_helper
with crypto_simd.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().

Remove the lrw-serpent-avx algorithm which did this.  Users who request
lrw(serpent) and previously would have gotten lrw-serpent-avx will now
get lrw(ecb-serpent-avx) instead, which is just as fast.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().

Remove the lrw-serpent-avx2 algorithm which did this.  Users who request
lrw(serpent) and previously would have gotten lrw-serpent-avx2 will now
get lrw(ecb-serpent-avx2) instead, which is just as fast.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Convert the SSE2 implementation of Serpent from the (deprecated)
ablkcipher and blkcipher interfaces over to the skcipher interface.
Note that this includes replacing the use of ablk_helper with
crypto_simd.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The XTS template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic XTS code themselves via xts_crypt().

Remove the xts-serpent-sse2 algorithm which did this.  Users who request
xts(serpent) and previously would have gotten xts-serpent-sse2 will now
get xts(ecb-serpent-sse2) instead, which is just as fast.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().

Remove the lrw-serpent-sse2 algorithm which did this.  Users who request
lrw(serpent) and previously would have gotten lrw-serpent-sse2 will now
get lrw(ecb-serpent-sse2) instead, which is just as fast.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add ECB, CBC, and CTR functions to glue_helper which use skcipher_walk
rather than blkcipher_walk.  This will allow converting the remaining
x86 algorithms from the blkcipher interface over to the skcipher
interface, after which we'll be able to remove the blkcipher_walk
versions of these functions.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add a function to crypto_simd that registers an array of skcipher
algorithms, then allocates and registers the simd wrapper algorithms for
them.  It assumes the naming scheme where the names of the underlying
algorithms are prefixed with two underscores.

Also add the corresponding 'unregister' function.

Most of the x86 crypto modules will be able to use these.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Replace memset to 0 followed by kfree with kzfree for
simplicity.
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add support for the legacy CryptoCell 630 and 710 revs.
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add device tree bindings for Arm CryptoCell 710 and 630p hardware
revisions.
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove enum definition which are not used by the REE interface
driver.
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The inclusion of dma-direct.h was only needed temporarily to prevent
breakage from the DMA API rework, since the actual CESA fix making it
redundant was merged in parallel. Now that both have landed, it can go.
Signed-off-by: NRobin Murphy <robin.murphy@arm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Increase timeout delay to support longer timing linked
to rng initialization. Measurement is based on timer instead
of instructions per iteration which is not powerful on all
targets.
Signed-off-by: NLionel Debieve <lionel.debieve@st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add optional property to enable the clock detection error
on rng block. It is used to allow slow clock source which
give correct entropy for rng.
Signed-off-by: NLionel Debieve <lionel.debieve@st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add a new property that allow to disable the clock error
detection which is required when the clock source selected
is out of specification (which is not mandatory).
Signed-off-by: NLionel Debieve <lionel.debieve@st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Adding optional resets property for rng.
Signed-off-by: NLionel Debieve <lionel.debieve@st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Avoid issue when probing the RNG without
reset if bad status has been detected previously
Signed-off-by: NLionel Debieve <lionel.debieve@st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

drivers/crypto/ccree/cc_cipher.c:629:15-22: WARNING opportunity for kmemdep

 Use kmemdup rather than duplicating its implementation

Generated by: scripts/coccinelle/api/memdup.cocci

Fixes: 63ee04c8 ("crypto: ccree - add skcipher support")
CC: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Omit extra messages for a memory allocation failure in these functions.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Reviewed-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

crypto: bfin_crc - Delete an error message for a failed memory allocation in bfin_crypto_crc_probe()

Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add test vectors for Speck64-XTS, generated in userspace using C code.
The inputs were borrowed from the AES-XTS test vectors, with key lengths
adjusted.

xts-speck64-neon passes these tests.  However, they aren't currently
applicable for the generic XTS template, as that only supports a 128-bit
block size.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add test vectors for Speck128-XTS, generated in userspace using C code.
The inputs were borrowed from the AES-XTS test vectors.

Both xts(speck128-generic) and xts-speck128-neon pass these tests.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add an ARM NEON-accelerated implementation of Speck-XTS.  It operates on
128-byte chunks at a time, i.e. 8 blocks for Speck128 or 16 blocks for
Speck64.  Each 128-byte chunk goes through XTS preprocessing, then is
encrypted/decrypted (doing one cipher round for all the blocks, then the
next round, etc.), then goes through XTS postprocessing.

The performance depends on the processor but can be about 3 times faster
than the generic code.  For example, on an ARMv7 processor we observe
the following performance with Speck128/256-XTS:

    xts-speck128-neon:     Encryption 107.9 MB/s, Decryption 108.1 MB/s
    xts(speck128-generic): Encryption  32.1 MB/s, Decryption  36.6 MB/s

In comparison to AES-256-XTS without the Cryptography Extensions:

    xts-aes-neonbs:        Encryption  41.2 MB/s, Decryption  36.7 MB/s
    xts(aes-asm):          Encryption  31.7 MB/s, Decryption  30.8 MB/s
    xts(aes-generic):      Encryption  21.2 MB/s, Decryption  20.9 MB/s

Speck64/128-XTS is even faster:

    xts-speck64-neon:      Encryption 138.6 MB/s, Decryption 139.1 MB/s

Note that as with the generic code, only the Speck128 and Speck64
variants are supported.  Also, for now only the XTS mode of operation is
supported, to target the disk and file encryption use cases.  The NEON
code also only handles the portion of the data that is evenly divisible
into 128-byte chunks, with any remainder handled by a C fallback.  Of
course, other modes of operation could be added later if needed, and/or
the NEON code could be updated to handle other buffer sizes.

The XTS specification is only defined for AES which has a 128-bit block
size, so for the GF(2^64) math needed for Speck64-XTS we use the
reducing polynomial 'x^64 + x^4 + x^3 + x + 1' given by the original XEX
paper.  Of course, when possible users should use Speck128-XTS, but even
that may be too slow on some processors; Speck64-XTS can be faster.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Export the Speck constants and transform context and the ->setkey(),
->encrypt(), and ->decrypt() functions so that they can be reused by the
ARM NEON implementation of Speck-XTS.  The generic key expansion code
will be reused because it is not performance-critical and is not
vectorizable, while the generic encryption and decryption functions are
needed as fallbacks and for the XTS tweak encryption.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add a generic implementation of Speck, including the Speck128 and
Speck64 variants.  Speck is a lightweight block cipher that can be much
faster than AES on processors that don't have AES instructions.

We are planning to offer Speck-XTS (probably Speck128/256-XTS) as an
option for dm-crypt and fscrypt on Android, for low-end mobile devices
with older CPUs such as ARMv7 which don't have the Cryptography
Extensions.  Currently, such devices are unencrypted because AES is not
fast enough, even when the NEON bit-sliced implementation of AES is
used.  Other AES alternatives such as Twofish, Threefish, Camellia,
CAST6, and Serpent aren't fast enough either; it seems that only a
modern ARX cipher can provide sufficient performance on these devices.

This is a replacement for our original proposal
(https://patchwork.kernel.org/patch/10101451/) which was to offer
ChaCha20 for these devices.  However, the use of a stream cipher for
disk/file encryption with no space to store nonces would have been much
more insecure than we thought initially, given that it would be used on
top of flash storage as well as potentially on top of F2FS, neither of
which is guaranteed to overwrite data in-place.

Speck has been somewhat controversial due to its origin.  Nevertheless,
it has a straightforward design (it's an ARX cipher), and it appears to
be the leading software-optimized lightweight block cipher currently,
with the most cryptanalysis.  It's also easy to implement without side
channels, unlike AES.  Moreover, we only intend Speck to be used when
the status quo is no encryption, due to AES not being fast enough.

We've also considered a novel length-preserving encryption mode based on
ChaCha20 and Poly1305.  While theoretically attractive, such a mode
would be a brand new crypto construction and would be more complicated
and difficult to implement efficiently in comparison to Speck-XTS.

There is confusion about the byte and word orders of Speck, since the
original paper doesn't specify them.  But we have implemented it using
the orders the authors recommended in a correspondence with them.  The
test vectors are taken from the original paper but were mapped to byte
arrays using the recommended byte and word orders.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add gcmaes_crypt_by_sg routine, that will do scatter/gather
by sg. Either src or dst may contain multiple buffers, so
iterate over both at the same time if they are different.
If the input is the same as the output, iterate only over one.

Currently both the AAD and TAG must be linear, so copy them out
with scatterlist_map_and_copy.  If first buffer contains the
entire AAD, we can optimize and not copy.   Since the AAD
can be any size, if copied it must be on the heap.  TAG can
be on the stack since it is always < 16 bytes.

Only the SSE routines are updated so far, so leave the previous
gcmaes_en/decrypt routines, and branch to the sg ones if the
keysize is inappropriate for avx, or we are SSE only.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The asm macros are all set up now, introduce entry points.

GCM_INIT and GCM_COMPLETE have arguments supplied, so that
the new scatter/gather entry points don't have to take all the
arguments, and only the ones they need.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

We can fast-path any < 16 byte read if the full message is > 16 bytes,
and shift over by the appropriate amount.  Usually we are
reading > 16 bytes, so this should be faster than the READ_PARTIAL
macro introduced in b20209c9 for the average case.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Before this diff, multiple calls to GCM_ENC_DEC will
succeed, but only if all calls are a multiple of 16 bytes.

Handle partial blocks at the start of GCM_ENC_DEC, and update
aadhash as appropriate.

The data offset %r11 is also updated after the partial block.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

HashKey computation only needs to happen once per scatter/gather operation,
save it between calls in gcm_context struct instead of on the stack.
Since the asm no longer stores anything on the stack, we can use
%rsp directly, and clean up the frame save/restore macros a bit.

Hashkeys actually only need to be calculated once per key and could
be moved to when set_key is called, however, the current glue code
falls back to generic aes code if fpu is disabled.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Prepare to handle partial blocks between scatter/gather calls.
For the last partial block, we only want to calculate the aadhash
in GCM_COMPLETE, and a new partial block macro will handle both
aadhash update and encrypting partial blocks between calls.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Fill in aadhash, aadlen, pblocklen, curcount with appropriate values.
pblocklen, aadhash, and pblockenckey are also updated at the end
of each scatter/gather operation, to be carried over to the next
operation.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

AAD hash only needs to be calculated once for each scatter/gather operation.
Move it to its own macro, and call it from GCM_INIT instead of
INITIAL_BLOCKS.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Introduce a gcm_context_data struct that will be used to pass
context data between scatter/gather update calls.  It is passed
as the second argument (after crypto keys), other args are
renumbered.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Make a macro for the main encode/decode routine.  Only a small handful
of lines differ for enc and dec.   This will also become the main
scatter/gather update routine.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Merge encode and decode tag calculations in GCM_COMPLETE macro.
Scatter/gather routines will call this once at the end of encryption
or decryption.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Reduce code duplication by introducting GCM_INIT macro.  This macro
will also be exposed as a function for implementing scatter/gather
support, since INIT only needs to be called once for the full
operation.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Macro-ify function save and restore.  These will be used in new functions
added for scatter/gather update operations.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>