- 05 3月, 2006 2 次提交
-
-
由 Martin Michlmayr 提交于
drivers/mmc/au1xmmc.c doesn't compile because commit e9225176 introduced a typo and passes the wrong argument to the mmc_resp_type macro. Error because of the typo: CC drivers/mmc/au1xmmc.o drivers/mmc/au1xmmc.c: In function ‘au1xmmc_send_command’: drivers/mmc/au1xmmc.c:197: warning: implicit declaration of function ‘mmc_rsp_type’ ... LD .tmp_vmlinux1 drivers/built-in.o: In function `au1xmmc_request':au1xmmc.c:(.text+0x89504): undefined reference to `mmc_rsp_type' :au1xmmc.c:(.text+0x8968c): undefined reference to `mmc_rsp_type' make: *** [.tmp_vmlinux1] Error 1 Error because of the wrong argument: CC drivers/mmc/au1xmmc.o drivers/mmc/au1xmmc.c: In function ‘au1xmmc_send_command’: drivers/mmc/au1xmmc.c:197: error: invalid type argument of ‘->’ Signed-off-by: NMartin Michlmayr <tbm@cyrius.com> Acked-by: NJordan Crouse <jordan.crouse@amd.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Martin Michlmayr 提交于
drivers/mmc/au1xmmc.c currently doesn't compile; it needs to be converted to use platform_driver. I cannot test this change because of lack of hardware but I followed the drivers this one is based on, and the code is certainly not worse than before. drivers/mmc/au1xmmc.c: At top level: drivers/mmc/au1xmmc.c:1002: error: ‘platform_bus_type’ undeclared here (not in a function) make[2]: *** [drivers/mmc/au1xmmc.o] Error 1 Signed-off-by: NMartin Michlmayr <tbm@cyrius.com> Acked-by: NJordan Crouse <jordan.crouse@amd.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 03 3月, 2006 9 次提交
-
-
由 Vladimir V. Saveliev 提交于
This patch fixes bugs in reiserfs where unsigned integers were checked whether they are less then 0. Signed-off-by: NVladimir V. Saveliev <vs@namesys.com> Cc: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NHans Reiser <reiser@namesys.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
numa_maps should not scan over huge vmas in order not to cause problems for non IA64 platforms that may have pte entries pointing to huge pages in a variety of ways in their page tables. Add a simple check to ignore vmas containing huge pages. Signed-off-by: NChristoph Lameter <clameter@engr.sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
On some platforms readq performs additional work to make sure I/O is done in a coherent way. This is not needed for time retrieval as done by the time interpolator. So we can use readq_relaxed instead which will improve performance. It affects sparc64 and ia64 only. Apparently it makes a significant difference on ia64. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Cc: john stultz <johnstul@us.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Stefan Seyfried 提交于
acpi_video_flags variable is unsigned long, so it should be set as such. This actually matters on x86-64. Signed-off-by: NStefan Seyfried <seife@suse.de> Signed-off-by: NPavel Machek <pavel@suse.cz> Cc: "Brown, Len" <len.brown@intel.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eric Van Hensbergen 提交于
v9fs has been plagued by an over-complicated approach trying to map Linux dentry semantics to Plan 9 fid semantics. Our previous approach called for aggressive flushing of the dcache resulting in several problems (including wierd cwd behavior when running /bin/pwd). This patch dramatically simplifies our handling of this fid management. Fids will not be clunked as promptly, but the new approach is more functionally correct. We now clunk un-open fids only when their dentry ref_count reaches 0 (and d_delete is called). Another simplification is we no longer seek to match fids to the process-id or uid of the action initiator. The uid-matching will need to be revisited when we fix the security model. Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eric Van Hensbergen 提交于
Lucho's atomic create+open fix had a bug in the super block initialization causing all mounts to fail. He was freeing an fcall too early. This patch fixes that oversight. Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Latchesar Ionkov 提交于
In order to assure atomic create+open v9fs stores the open fid produced by v9fs_vfs_create in the dentry, from where v9fs_file_open retrieves it and associates it with the open file. This patch modifies v9fs to use nameidata.intent.open values to do the atomic create+open. Signed-off-by: NLatchesar Ionkov <lucho@ionkov.net> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 John Bowler 提交于
Sync up the recent redboot fix with MTD CVS. It uses the correct swab() functions. Cc: John Bowler <jbowler@acm.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
I seem to have lost this read_unlock(). While we're there, let's turn that interruptible sleep unto uninterruptible, so we don't get a busywait if signal_pending(). (Again. We seem to have a habit of doing this). Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 02 3月, 2006 16 次提交
-
-
-
由 Linus Torvalds 提交于
-
由 Greg KH 提交于
This patch should fixe a problem with eeh_add_device_late() not being defined in the ppc64 build process, causing the build to break. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mark Fasheh 提交于
Switch from list_head to hlist_head. Make the size of the hash dependent upon the allocated area, rather than a constant. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Sunil Mushran 提交于
to prevent confusion when a virtual ip is created on the same interface Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Joel Becker 提交于
The extent map code has long noticed when the on-disk extent information is corrupt. However, so far it has only returned an error. We should take the filesystem read-only, as it is corrupt. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Joel Becker 提交于
Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Mark Fasheh 提交于
Orphan dir recovery can deadlock with another process in ocfs2_delete_inode() in some corner cases. Fix this by tracking recovery state more closely and allowing it to handle inode wipes which might deadlock. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Jeff Mahoney 提交于
This patch finishes cleaning up the node manager allocations if it fails to initialize. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Atsushi Nemoto 提交于
The 'tick_usec' is USER_HZ period in usec. do_gettimeofday() should use kernel HZ value. Here is a patch for MIPS. It seems m32r, m68k and sparc have same problem though their HZ and USER_HZ are same for now. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Mark Fasheh 提交于
Remove some prototypes from tcp.h for functions which have long been gone. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Mark Fasheh 提交于
Remove some #ifdef'd out code which was inadvertantly introduced in our initial merge. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Mark Fasheh 提交于
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Jeff Mahoney 提交于
The check to determine which format string is appopriate for u64 and friends works in most cases, but UML on x86_64 doesn't define CONFIG_X86_64, so it results in screen fulls of compile-time warnings. This patch fixes it to handle that case. fs/ocfs2/cluster/masklog.h | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-) Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Linus Torvalds 提交于
-
- 01 3月, 2006 13 次提交
-
-
由 Harald Welte 提交于
Using this patch, Omnikey CardMan 4000 and 4040 devices automatically get their device nodes created by udev. Also, we now check for (and handle) failure of pcmcia_register_driver() Signed-off-by: NHarald Welte <laforge@netfilter.org> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Jesse Allen 提交于
The axnet_cs driver can support the AMB8110 PC Card, so add the id for it. In the old pcmcia-cs config file, this card is listed with the comment "not specific enough". The last entry in the axnet_ids has the same comment. They are disabled, and for good reason as it was originally identified by the MANFID, and that is shared with several cards that use both the pcnet_cs driver and axnet_cs driver. I tried my AMB8110 with pcnet_cs, and found that it works fine, and I cannot find a reason for either, except that the old config file recommended axnet_cs. Signed-off-by: NJesse Allen <the3dfxdude@gmail.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Pavel Roskin 提交于
Don't just use cards with PCMCIA ID 0x0156, 0x0002. Make sure that the vendor string is "Intersil" or "INTERSIL" Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Pavel Roskin 提交于
This is needed to distinguish Intersil and non-Intersil cards with numeric ID 0x0156, 0x0002. Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 David Brownell 提交于
Add another CF card ID. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
The second pseudo multi-function device of a PCMCIA card may only be configured once the first one is initialized. Therefore, delay the registration of the second device until the first one is initialized. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net
-
-
由 Linus Torvalds 提交于
-
由 Darren Jenkins 提交于
Examples of misuse are 3112 info->init_error = -1; 4440 if ((info->init_error = register_test(info)) < 0) { Signed-off-by: NDarren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Acked-by: NPaul Fulghum <paulkf@microgate.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
Under some circumstances `points' can get printed before it's initialised. Spotted by Carlos Martin <carlos@cmartin.tk>. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Benjamin Herrenschmidt 提交于
This patch adds mm->task_size to keep track of the task size of a given mm and uses that to fix the powerpc vdso so that it uses the mm task size to decide what pages to fault in instead of the current thread flags (which broke when ptracing). (akpm: I expect that mm_struct.task_size will become the way in which we finally sort out the confusion between 32-bit processes and 32-bit mm's. It may need tweaks, but at this stage this patch is powerpc-only.) Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
Fix oprofile linkage. Pointed out by "Luke Yang" <luke.adi@gmail.com>. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-