SEC v4.x were only 36-bit, SEC v5+ are 40-bit capable.
Also set a DMA mask for any job ring devices created.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

caam_read copies random bytes from two buffers into output.

caam rng can fill empty buffer 0xffff bytes at a time,
but the buffer sizes are rounded down to multiple of cacheline size.
Signed-off-by: NYuan Kang <Yuan.Kang@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

support chained scatterlists for aead, ablkcipher and ahash.
Signed-off-by: NYuan Kang <Yuan.Kang@freescale.com>

- fix dma unmap leak
- un-unlikely src == dst, due to experience with AF_ALG
Signed-off-by: NKudupudi Ugendreshwar <B38865@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

caam supports and registers unkeyed sha algorithms and md5.
Signed-off-by: NYuan Kang <Yuan.Kang@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

caam supports ahash hmac with sha algorithms and md5.
Signed-off-by: NYuan Kang <Yuan.Kang@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

- rename scatterlist and link_tbl functions
- link_tbl changed to sec4_sg
- sg_to_link_tbl_one changed to dma_to_sec4_sg_one,
  since no scatterlist is use
Signed-off-by: NYuan Kang <Yuan.Kang@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

create separate files for split key generation and scatterlist functions.
Signed-off-by: NYuan Kang <Yuan.Kang@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

remove caam_jr_register and caam_jr_deregister
to allow sharing of job rings.
Signed-off-by: NYuan Kang <Yuan.Kang@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

functions for external storage of seq in/out lengths,
i.e., for 32-bit lengths.

These type-dependent functions automatically determine whether to
store the length internally (embedded in the command header word) or
externally (after the address pointer), based on size of the type
given.
Signed-off-by: NYuan Kang <Yuan.Kang@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add a PDB header file to support building protocol descriptors.
Signed-off-by: NSteve Cornelius <sec@pobox.com>
Signed-off-by: NHemant Agrawal <hemant@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

init_desc, by always ORing with 1 for the descriptor header inclusion
into the descriptor length, and init_sh_desc_pdb, by always specifying
the descriptor length modification for the PDB via options, would not
allow for odd length PDBs to be embedded in the constructed descriptor
length.  Fix this by simply changing the OR to an addition.

also round-up pdb_bytes to the next SEC command unit size, to
allow for, e.g., optional packet header bytes that aren't a
multiple of CAAM_CMD_SZ.
Reported-by: NRadu-Andrei BULIE <radu.bulie@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Cc: Yashpal Dutta <yashpal.dutta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In case of protocol acceleration descriptors, Shared descriptor header must
carry size of header length + PDB length in words which will be skipped by
DECO while processing descriptor to provide first command word offset
Signed-off-by: NYashpal Dutta <yashpal.dutta@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

SEC4 h/w gets configured in 32- vs. 36-bit physical
addressing modes depending on the size of dma_addr_t,
which is not always equal to sizeof(u32 *).

Also fixed alignment of a dma_unmap call whilst in there.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

presumably leftovers from possible macro development.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Move AES header to the new asm/crypto directory.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Move serpent crypto headers to the new asm/crypto/ directory.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Now that shared glue code is available, convert twofish-avx to use it.

Cc: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de>
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Now that shared glue code is available, convert twofish-x86_64-3way to use it.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Now that shared glue code is available, convert camellia-x86_64 to use it.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Now that shared glue code is available, convert serpent-avx to use it.

Cc: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de>
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Now that serpent-sse2 glue code has been made generic, it can be split to
separate module.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

crypto: serpent-sse2 - prepare serpent-sse2 glue code into generic x86 glue code for 128bit block ciphers

Block cipher implementations in arch/x86/crypto/ contain common glue code that
is currently duplicated in each module (camellia-x86_64, twofish-x86_64-3way,
twofish-avx, serpent-sse2 and serpent-avx). This patch prepares serpent-sse2
glue into generic glue code for all 128bit block ciphers to use in
arch/x86/crypto.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove duplicate ablk_* functions and make use of ablk_helper module instead.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove duplicate ablk_* functions and make use of ablk_helper module instead.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Move ablk-* functions to separate module to share common code between cipher
implementations.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NSeth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: NKent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

When the nx driver was pulled, the Makefile that actually
builds it is arch/powerpc/Makefile. This is unnatural.

This patch moves the line that builds the nx driver from
arch/powerpc/Makefile to drivers/crypto/Makefile where it
belongs.
Signed-off-by: NSeth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: NKent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 45001e92, which added support for RNGA, ignored the previous commit
984e976f, which changed the data_present API.

Cc: Matt Mackall <mpm@selenic.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Alan Carvalho de Assis <acassis@gmail.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Signed-off-by: NBenoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

It has been observed that sometimes the crypto allocation code
will get stuck for 60 seconds or multiples thereof.  This is
usually caused by an algorithm failing to pass the self-test.

If an algorithm fails to be constructed, we will immediately notify
all larval waiters.  However, if it succeeds in construction, but
then fails the self-test, we won't notify anyone at all.

This patch fixes this by merging the notification in the case
where the algorithm fails to be constructed with that of the
the case where it pases the self-test.  This way regardless of
what happens, we'll give the larval waiters an answer.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Rename serpent-avx assembler functions so that they do not collide with
serpent-sse2 assembler functions when linking both versions in to same
kernel image.
Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Cc: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de>
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch changes u8 in struct arc4_ctx and variables to u32 (as AMD seems
to have problem with u8 array). Below are tcrypt results of old 1-byte block
cipher versus ecb(arc4) with u8 and ecb(arc4) with u32.

tcrypt results, x86-64 (speed ratios: new-u32/old, new-u8/old):

                  u32    u8
AMD Phenom II   : x3.6   x2.7
Intel Core 2    : x2.0   x1.9

tcrypt results, i386 (speed ratios: new-u32/old, new-u8/old):

                  u32    u8
Intel Atom N260 : x1.5   x1.4

Cc: Jon Oberheide <jon@oberheide.org>
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Currently arc4.c provides simple one-byte blocksize cipher which is wrapped
by ecb() module, giving function call overhead on every encrypted byte. This
patch adds ecb(arc4) directly into arc4.c for higher performance.

tcrypt results (speed ratios: new/old):

AMD Phenom II, x86-64 : x2.7
Intel Core 2, x86-64  : x1.9
Intel Atom N260, i386 : x1.4

Cc: Jon Oberheide <jon@oberheide.org>
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 98971f84 ("crypto: s390 - cleanup
DES code") should have also removed crypto_des.h. That file is unused
and unneeded since that commit. So let's clean up that file too.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Acked-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds a x86_64/avx assembler implementation of the Serpent block
cipher. The implementation is very similar to the sse2 implementation and
processes eight blocks in parallel. Because of the new non-destructive three
operand syntax all move-instructions can be removed and therefore a little
performance increase is provided.

Patch has been tested with tcrypt and automated filesystem tests.

Tcrypt benchmark results:

Intel Core i5-2500 CPU (fam:6, model:42, step:7)

serpent-avx-x86_64 vs. serpent-sse2-x86_64
128bit key:                                             (lrw:256bit)    (xts:256bit)
size    ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec
16B     1.03x   1.01x   1.01x   1.01x   1.00x   1.00x   1.00x   1.00x   1.00x   1.01x
64B     1.00x   1.00x   1.00x   1.00x   1.00x   0.99x   1.00x   1.01x   1.00x   1.00x
256B    1.05x   1.03x   1.00x   1.02x   1.05x   1.06x   1.05x   1.02x   1.05x   1.02x
1024B   1.05x   1.02x   1.00x   1.02x   1.05x   1.06x   1.05x   1.03x   1.05x   1.02x
8192B   1.05x   1.02x   1.00x   1.02x   1.06x   1.06x   1.04x   1.03x   1.04x   1.02x

256bit key:                                             (lrw:384bit)    (xts:512bit)
size    ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec
16B     1.01x   1.00x   1.01x   1.01x   1.00x   1.00x   0.99x   1.03x   1.01x   1.01x
64B     1.00x   1.00x   1.00x   1.00x   1.00x   1.00x   1.00x   1.01x   1.00x   1.02x
256B    1.05x   1.02x   1.00x   1.02x   1.05x   1.02x   1.04x   1.05x   1.05x   1.02x
1024B   1.06x   1.02x   1.00x   1.02x   1.07x   1.06x   1.05x   1.04x   1.05x   1.02x
8192B   1.05x   1.02x   1.00x   1.02x   1.06x   1.06x   1.04x   1.05x   1.05x   1.02x

serpent-avx-x86_64 vs aes-asm (8kB block):
         128bit  256bit
ecb-enc  1.26x   1.73x
ecb-dec  1.20x   1.64x
cbc-enc  0.33x   0.45x
cbc-dec  1.24x   1.67x
ctr-enc  1.32x   1.76x
ctr-dec  1.32x   1.76x
lrw-enc  1.20x   1.60x
lrw-dec  1.15x   1.54x
xts-enc  1.22x   1.64x
xts-dec  1.17x   1.57x
Signed-off-by: NJohannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The AVX implementation of the twofish cipher processes 8 blocks parallel, so we
need to make test vectors larger to check parallel code paths. Test vectors are
also large enough to deal with 16 block parallel implementations which may occur
in the future.
Signed-off-by: NJohannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de>
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds a x86_64/avx assembler implementation of the Twofish block
cipher. The implementation processes eight blocks in parallel (two 4 block
chunk AVX operations). The table-lookups are done in general-purpose registers.
For small blocksizes the 3way-parallel functions from the twofish-x86_64-3way
module are called. A good performance increase is provided for blocksizes
greater or equal to 128B.

Patch has been tested with tcrypt and automated filesystem tests.

Tcrypt benchmark results:

Intel Core i5-2500 CPU (fam:6, model:42, step:7)

twofish-avx-x86_64 vs. twofish-x86_64-3way
128bit key:                                             (lrw:256bit)    (xts:256bit)
size    ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec
16B     0.96x   0.97x   1.00x   0.95x   0.97x   0.97x   0.96x   0.95x   0.95x   0.98x
64B     0.99x   0.99x   1.00x   0.99x   0.98x   0.98x   0.99x   0.98x   0.99x   0.98x
256B    1.20x   1.21x   1.00x   1.19x   1.15x   1.14x   1.19x   1.20x   1.18x   1.19x
1024B   1.29x   1.30x   1.00x   1.28x   1.23x   1.24x   1.26x   1.28x   1.26x   1.27x
8192B   1.31x   1.32x   1.00x   1.31x   1.25x   1.25x   1.28x   1.29x   1.28x   1.30x

256bit key:                                             (lrw:384bit)    (xts:512bit)
size    ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec
16B     0.96x   0.96x   1.00x   0.96x   0.97x   0.98x   0.95x   0.95x   0.95x   0.96x
64B     1.00x   0.99x   1.00x   0.98x   0.98x   1.01x   0.98x   0.98x   0.98x   0.98x
256B    1.20x   1.21x   1.00x   1.21x   1.15x   1.15x   1.19x   1.20x   1.18x   1.19x
1024B   1.29x   1.30x   1.00x   1.28x   1.23x   1.23x   1.26x   1.27x   1.26x   1.27x
8192B   1.31x   1.33x   1.00x   1.31x   1.26x   1.26x   1.29x   1.29x   1.28x   1.30x

twofish-avx-x86_64 vs aes-asm (8kB block):
         128bit  256bit
ecb-enc  1.19x   1.63x
ecb-dec  1.18x   1.62x
cbc-enc  0.75x   1.03x
cbc-dec  1.23x   1.67x
ctr-enc  1.24x   1.65x
ctr-dec  1.24x   1.65x
lrw-enc  1.15x   1.53x
lrw-dec  1.14x   1.52x
xts-enc  1.16x   1.56x
xts-dec  1.16x   1.56x
Signed-off-by: NJohannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Since mv_hash_final_fallback() uses ctx->state, read out the digest
state register before calling it.
Signed-off-by: NPhil Sutter <phil.sutter@viprinet.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NPhil Sutter <phil.sutter@viprinet.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The timer triggers when 500ms have gone by after triggering the engine
and no completion interrupt was received. The callback then tries to
sanitise things as well as possible.
Signed-off-by: NPhil Sutter <phil.sutter@viprinet.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>