- 27 1月, 2011 1 次提交
-
-
由 Chris Wilson 提交于
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
- 26 1月, 2011 2 次提交
-
-
由 Chris Wilson 提交于
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
- 25 1月, 2011 12 次提交
-
-
由 Jesse Barnes 提交于
Rather than power cycling the panel when there are no bits to display, use the VDD AUX bit to power the panel up just enough for DP AUX transactions to work. This prevents a bit of unnecessary ugliness as mode sets occur on the panel. Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Jesse Barnes 提交于
Now that we're doing the right thing elsewhere, these are no longer necessary. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31114Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
Move the plane->mode config to the point of use rather than repeatedly querying the same information. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
Merge important suspend and resume regression fixes and resolve the small conflict. Conflicts: drivers/gpu/drm/i915/i915_dma.c
-
由 Chris Wilson 提交于
error_bo and pinned_bo could be used uninitialised if there were no active buffers. Caught by kmemcheck. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Michael Karcher 提交于
The opregion is a shared memory region between ACPI and the graphics driver. As the ACPI mapping has been changed to cachable in commit 6d5bbf00, mapping the intel opregion non-cachable now fails. As no bus-master hardware is involved in the opregion, cachable map should do no harm. Tested on a Fujitsu Lifebook P8010. Signed-off-by: NMichael Karcher <kernel@mkarcher.dialup.fu-berlin.de> [ickle: convert to acpi_os_ioremap for consistency] Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
Merge with Linus to resolve conflicting fixes for the reusing the stale HEAD value during intel_ring_wait(). Conflicts: drivers/gpu/drm/i915/intel_ringbuffer.c
-
由 Chris Wilson 提交于
If the driver calls into the kernel to wait for a breadcrumb to pass, but hasn't enabled interrupts, fallback to polling the breadcrumb value. Reported-by: NChris Clayton <chris2553@googlemail.com> Tested-by: NChris Clayton <chris2553@googlemail.com> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
We only have sufficient information for accurate (sub-frame) timestamping when the modesetting is under our control. Reported-by: NChris Clayton <chris2553@googlemail.com> Tested-by: NChris Clayton <chris2553@googlemail.com> Reviewed-by: NMario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
Reported-by: NChris Clayton <chris2553@googlemail.com> Tested-by: NChris Clayton <chris2553@googlemail.com> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
We can only utilize the stolen portion of the GTT if we are in sole charge of the hardware. This is only true if using GEM and KMS, otherwise VESA continues to access stolen memory. Reported-by: NArnd Bergmann <arnd@arndb.de> Reported-by: NFrederic Weisbecker <fweisbec@gmail.com> Tested-by: NJiri Olsa <jolsa@redhat.com> Tested-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
- 24 1月, 2011 16 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus由 Linus Torvalds 提交于
* 'BUG_ON' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: Remove MAYBE_BUILD_BUG_ON BUILD_BUG_ON: make it handle more cases
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: module: fix missing semicolons in MODULE macro usage param: add null statement to compiled-in module params module: fix linker error for MODULE_VERSION when !MODULE and CONFIG_SYSFS=n module: show version information for built-in modules in sysfs
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: selinux: return -ENOMEM when memory allocation fails tpm: fix panic caused by "tpm: Autodetect itpm devices" TPM: Long default timeout fix trusted keys: Fix a memory leak in trusted_update(). keys: add trusted and encrypted maintainers encrypted-keys: rename encrypted_defined files to encrypted trusted-keys: rename trusted_defined files to trusted
-
由 Rusty Russell 提交于
Now BUILD_BUG_ON() can handle optimizable constants, we don't need MAYBE_BUILD_BUG_ON any more. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Rusty Russell 提交于
BUILD_BUG_ON used to use the optimizer to do code elimination or fail at link time; it was changed to first the size of a negative array (a nicer compile time error), then (in 8c87df45) to a bitfield. This forced us to change some non-constant cases to MAYBE_BUILD_BUG_ON(); as Jan points out in that commit, it didn't work as intended anyway. bitfields: needs a literal constant at parse time, and can't be put under "if (__builtin_constant_p(x))" for example. negative array: can handle anything, but if the compiler can't tell it's a constant, silently has no effect. link time: breaks link if the compiler can't determine the value, but the linker output is not usually as informative as a compiler error. If we use the negative-array-size method *and* the link time trick, we get the ability to use BUILD_BUG_ON() under __builtin_constant_p() branches, and maximal ability for the compiler to detect errors at build time. We also document it thoroughly. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Jan Beulich <JBeulich@novell.com> Acked-by: NHollis Blanchard <hollisb@us.ibm.com>
-
由 Rusty Russell 提交于
You always needed them when you were a module, but the builtin versions of the macros used to be more lenient. Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Linus Walleij 提交于
Add an unused struct declaration statement requiring a terminating semicolon to the compile-in case to provoke an error if __MODULE_INFO() is used without the terminating semicolon. Previously MODULE_ALIAS("foo") (no semicolon) compiled fine if MODULE was not selected. Cc: Dan Carpenter <error27@gmail.com> Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Rusty Russell 提交于
lib/built-in.o:(__modver+0x8): undefined reference to `__modver_version_show' lib/built-in.o:(__modver+0x2c): undefined reference to `__modver_version_show' Simplest to just not emit anything: if they've disabled SYSFS they probably want the smallest kernel possible. Reported-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Dmitry Torokhov 提交于
Currently only drivers that are built as modules have their versions shown in /sys/module/<module_name>/version, but this information might also be useful for built-in drivers as well. This especially important for drivers that do not define any parameters - such drivers, if built-in, are completely invisible from userspace. This patch changes MODULE_VERSION() macro so that in case when we are compiling built-in module, version information is stored in a separate section. Kernel then uses this data to create 'version' sysfs attribute in the same fashion it creates attributes for module parameters. Signed-off-by: NDmitry Torokhov <dtor@vmware.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Davidlohr Bueso 提交于
Return -ENOMEM when memory allocation fails in cond_init_bool_indexes, correctly propagating error code to caller. Signed-off-by: NDavidlohr Bueso <dave@gnu.org> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Olof Johansson 提交于
commit 3f0d3d01 adds a check for PNP device id to the common tpm_tis_init() function, which in some cases (force=1) will be called without the device being a member of a pnp_dev. Oopsing and panics ensue. Move the test up to before the call to tpm_tis_init(), since it just modifies a global variable anyway. Signed-off-by: NOlof Johansson <olof@lixom.net> Acked-by: NRajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Rajiv Andrade 提交于
If duration variable value is 0 at this point, it's because chip->vendor.duration wasn't filled by tpm_get_timeouts() yet. This patch sets then the lowest timeout just to give enough time for tpm_get_timeouts() to further succeed. This fix avoids long boot times in case another entity attempts to send commands to the TPM when the TPM isn't accessible. Signed-off-by: NRajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Jesper Juhl 提交于
One failure path in security/keys/trusted.c::trusted_update() does not free 'new_p' while the others do. This patch makes sure we also free it in the remaining path (if datablob_parse() returns different from Opt_update). Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Mimi Zohar 提交于
Add myself and David Safford as maintainers for trusted/encrypted keys. Signed-off-by: NMimi Zohar <zohar@us.ibm.com> Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Mimi Zohar 提交于
Rename encrypted_defined.c and encrypted_defined.h files to encrypted.c and encrypted.h, respectively. Based on request from David Howells. Signed-off-by: NMimi Zohar <zohar@us.ibm.com> Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Mimi Zohar 提交于
Rename trusted_defined.c and trusted_defined.h files to trusted.c and trusted.h, respectively. Based on request from David Howells. Signed-off-by: NMimi Zohar <zohar@us.ibm.com> Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
- 23 1月, 2011 6 次提交
-
-
由 Chris Wilson 提交于
Starting with SandyBridge (though possible with earlier hacked BIOSes), the BIOS may initialise the IGFX as secondary to a discrete GPU. Prior, it would simply disable the integrated GPU. So we adjust our PCI class mask to match any DISPLAY_CLASS device. In such a configuration, the IGFX is not a primary VGA controller and so should not take part in VGA arbitration, and the error return from vga_client_register() is expected. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
-
由 Chris Wilson 提交于
There are I915_NUM_RINGS-1 inter-ring synchronisation counters, but we were clearing I915_NUM_RINGS of them. Oops. Reported-by: NJiri Slaby <jirislaby@gmail.com> Tested-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Randy Dunlap 提交于
Fix new fs/dcache.c kernel-doc warnings: Warning(fs/dcache.c:184): No description found for parameter 'dentry' Warning(fs/dcache.c:296): No description found for parameter 'parent' Warning(fs/dcache.c:1985): No description found for parameter 'dparent' Warning(fs/dcache.c:1985): Excess function parameter 'parent' description in 'd_validate' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Nick Piggin <npiggin@kernel.dk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix new rapidio kernel-doc warnings: Warning(drivers/rapidio/rio-scan.c:953): No description found for parameter 'prev' Warning(drivers/rapidio/rio-scan.c:953): No description found for parameter 'prev_port' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix move of drivers/serial/ to drivers/tty/, where it broke one of the docbook files: docproc: drivers/serial/serial_core.c: No such file or directory Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 1月, 2011 3 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6由 Linus Torvalds 提交于
* 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (101 commits) [media] staging/lirc: fix mem leaks and ptr err usage [media] hdpvr: reduce latency of i2c read/write w/recycled buffer [media] hdpvr: enable IR part [media] rc/mceusb: timeout should be in ns, not us [media] v4l2-device: fix 'use-after-freed' oops [media] v4l2-dev: don't memset video_device.dev [media] zoran: use video_device_alloc instead of kmalloc [media] w9966: zero device state after a detach [media] v4l: Fix a use-before-set in the control framework [media] v4l: Include linux/videodev2.h in media/v4l2-ctrls.h [media] DocBook/v4l: update V4L2 revision and update copyright years [media] DocBook/v4l: fix validation error in dev-rds.xml [media] v4l2-ctrls: queryctrl shouldn't attempt to replace V4L2_CID_PRIVATE_BASE IDs [media] v4l2-ctrls: fix missing 'read-only' check [media] pvrusb2: Provide more information about IR units to lirc_zilog and ir-kbd-i2c [media] ir-kbd-i2c: Add back defaults setting for Zilog Z8's at addr 0x71 [media] lirc_zilog: Update TODO.lirc_zilog [media] lirc_zilog: Add Andy Walls to copyright notice and authors list [media] lirc_zilog: Remove useless struct i2c_driver.command function [media] lirc_zilog: Remove unneeded tests for existence of the IR Tx function ...
-
由 David Howells 提交于
Fix up comments in the key management code. No functional changes. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-