- 26 2月, 2018 38 次提交
-
-
由 Jacopo Mondi 提交于
Copy the soc_camera based driver in v4l2 sensor driver directory. This commit just copies the original file without modifying it. No modification to KConfig and Makefile as soc_camera framework dependencies need to be removed first in next commit. Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Jacopo Mondi 提交于
Add support to ov772x driver for frame intervals handling and enumeration. Tested with 10MHz and 24MHz input clock at VGA and QVGA resolutions for 10, 15 and 30 frame per second rates. Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Jacopo Mondi 提交于
Remove soc_camera framework dependencies from ov772x sensor driver. - Handle clock and gpios - Register async subdevice - Remove soc_camera specific g/s_mbus_config operations - Change image format colorspace from JPEG to SRGB as the two use the same colorspace information but JPEG makes assumptions on color components quantization that do not apply to the sensor - Remove sizes crop from get_selection as driver can't scale - Add kernel doc to driver interface header file - Adjust build system This commit does not remove the original soc_camera based driver as long as other platforms depends on soc_camera-based CEU driver. Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Jacopo Mondi 提交于
Copy the soc_camera based driver in v4l2 sensor driver directory. This commit just copies the original file without modifying it. No modification to KConfig and Makefile as soc_camera framework dependencies need to be removed first in next commit. Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Jacopo Mondi 提交于
Add driver for Renesas Capture Engine Unit (CEU). The CEU interface supports capturing 'data' (YUV422) and 'images' (NV[12|21|16|61]). This driver aims to replace the soc_camera-based sh_mobile_ceu one. Tested with ov7670 camera sensor, providing YUYV_2X8 data on Renesas RZ platform GR-Peach. Tested with ov7725 camera sensor on SH4 platform Migo-R. Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: added two 'fall-through' comments] Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Solve the following warnings: + drivers/media/i2c/tvp514x.c: warning: Excess function parameter 'a' description in 'tvp514x_g_frame_interval': => 759 + drivers/media/i2c/tvp514x.c: warning: Excess function parameter 'a' description in 'tvp514x_s_frame_interval': => 784 + drivers/media/i2c/tvp514x.c: warning: Function parameter or member 'ival' not described in 'tvp514x_g_frame_interval': => 759 + drivers/media/i2c/tvp514x.c: warning: Function parameter or member 'ival' not described in 'tvp514x_s_frame_interval': => 784 Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Fix this warning regression: drivers/media/i2c/ov7740.c: warning: variable 'ret' set but not used [-Wunused-but-set-variable]: => 276:6 Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Kieran Bingham 提交于
The ADV748x handles interlaced media using V4L2_FIELD_ALTERNATE field types. The correct specification for the height on the mbus is the image height, in this instance, the field height. The AFE component already correctly adjusts the height on the mbus, but the HDMI component got left behind. Adjust the mbus height to correctly describe the image height of the fields when processing interlaced video for HDMI pipelines. Fixes: 3e89586a ("media: i2c: adv748x: add adv748x driver") Reviewed-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Antonio Cardace 提交于
Use %*ph format to print small buffer as hex string. Remove newline at the end of the format string as it would be duplicated by the one supplied as last argument. Suggested-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NAntonio Cardace <anto.cardace@gmail.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
If CEC is not enabled for the vivid driver, then the adap pointer is NULL and 'adap->phys_addr' will fail. Cc: <stable@vger.kernel.org> # for v4.12 and up Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Antonio Cardace 提交于
Use %*phC format to print small buffers as hex strings Suggested-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NAntonio Cardace <anto.cardace@gmail.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
cec_transmit_msg_fh() first checked the message for errors, and only after the message was found to be valid did it log the message contents. However, that makes it hard to associate an error in the kernel log with the message since the message contents was never logged in that case. So swap the order: first log the message (once some very basic checks are done), and only after that check for errors. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Corentin Labbe 提交于
ivtv-alsa-mixer functions was introduced in commit 269c11fb ("[media] ivtv, ivtv-alsa: Add initial ivtv-alsa interface driver for ivtv") But according to commit message, ivtv-alsa-mixer.c was already dead code. 5 years after, we should remove it. Signed-off-by: NCorentin Labbe <clabbe@baylibre.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: removed forgotten ivtv-alsa-mixer.h include] Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Corentin Labbe 提交于
cx18-alsa-mixer functions are not used since commit 4cb565cc ("V4L/DVB: cx18: make it so cx18-alsa-main.c compiles") 9 year later, let's just remove them. Signed-off-by: NCorentin Labbe <clabbe@baylibre.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Gustavo A. R. Silva 提交于
Add suffix ULL to constant 10 in order to give the compiler complete information about the proper arithmetic to use. Notice that this constant is used in a context that expects an expression of type u64 (64 bits, unsigned). The expression len * 10 * CEC_TIM_DATA_BIT_TOTAL is currently being evaluated using 32-bit arithmetic. Also, remove unnecessary parentheses and add a code comment to make it clear what is the reason of the code change. Addresses-Coverity-ID: 1454996 ("Unintentional integer overflow") Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Gustavo A. R. Silva 提交于
Cast left and top to dma_addr_t in order to give the compiler complete information about the proper arithmetic to use. Notice that these variables are being used in contexts that expect expressions of type dma_addr_t (64 bit, unsigned). Such expressions are currently being evaluated using 32-bit arithmetic. Also, move the expression (((dma_addr_t)left * veu->vfmt_out.fmt->depth) >> 3) at the end in order to avoid a line wrapping checkpatch.pl warning. Addresses-Coverity-ID: 1056807 ("Unintentional integer overflow") Addresses-Coverity-ID: 1056808 ("Unintentional integer overflow") Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Gustavo A. R. Silva 提交于
Cast p to dma_addr_t in order to avoid a potential integer overflow. This variable is being used in a context that expects an expression of type dma_addr_t (u64). The expression p << PAGE_SHIFT is currently being evaluated using 32-bit arithmetic. Addresses-Coverity-ID: 1458347 ("Unintentional integer overflow") Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Gustavo A. R. Silva 提交于
Add suffix LL to constant 1000000 in order to give the compiler complete information about the proper arithmetic to use. Notice that this constant is used in a context that expects an expression of type ktime_t (64 bits, signed). The expression ir->polling * 1000000 is currently being evaluated using 32-bit arithmetic. Addresses-Coverity-ID: 1392628 ("Unintentional integer overflow") Addresses-Coverity-ID: 1392630 ("Unintentional integer overflow") Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Gustavo A. R. Silva 提交于
Add suffix LL to constant 2 in order to give the compiler complete information about the proper arithmetic to use. Notice that this constant is used in a context that expects an expression of type s64 (64 bits, signed). The expression 2 * (clock_rate - abs_nco_freq) is currently being evaluated using 32-bit arithmetic. Addresses-Coverity-ID: 1446589 ("Unintentional integer overflow") Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Gustavo A. R. Silva 提交于
Add suffix ULL to constant 10 in order to give the compiler complete information about the proper arithmetic to use. Notice that this constant is used in a context that expects an expression of type u64 (64 bits, unsigned). The expression fpxin = state->config->xin * 10 is currently being evaluated using 32-bit arithmetic. Addresses-Coverity-ID: 200604 ("Unintentional integer overflow") Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Gustavo A. R. Silva 提交于
Add suffix ULL to constant 7 in order to give the compiler complete information about the proper arithmetic to use. Notice that this constant is used in a context that expects an expression of type u64 (64 bits, unsigned). The expression dev->pdata->clk * 7 is currently being evaluated using 32-bit arithmetic. Addresses-Coverity-ID: 1271223 ("Unintentional integer overflow") Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Masami Hiramatsu 提交于
Fixes vb2_vmalloc_get_userptr() to ioremap correct area. Since the current code does ioremap the page address, if the offset > 0, it does not do ioremap the last page and results in kernel panic. This fixes to pass the size + offset to ioremap so that ioremap can map correct area. Also, this uses __pfn_to_phys() to get the physical address of given PFN. Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org> Reported-by: NTakao Orito <orito.takao@socionext.com> Reported-by: NFumihiro ATSUMI <atsumi@infinitegra.co.jp> Reviewed-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Sakari Ailus 提交于
If buffers were prepared or queued and the buffers were released without starting the queue, the finish mem op (corresponding to the prepare mem op) was never called to the buffers. Before commit a136f59c there was no need to do this as in such a case the prepare mem op had not been called yet. Address the problem by explicitly calling finish mem op when the queue is stopped if the buffer is in either prepared or queued state. Fixes: a136f59c ("[media] vb2: Move buffer cache synchronisation to prepare from queue") Cc: stable@vger.kernel.org # for v4.13 and up Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com> Tested-by: NDevin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
The vivid driver has two custom controls that change the behavior of RDS. Depending on the control setting the V4L2_CAP_READWRITE capability is toggled. However, after an earlier commit the capability was no longer set correctly. This is now fixed. Fixes: 9765a32c ("vivid: set device_caps in video_device") Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Colin Ian King 提交于
Currently an out of range dev->nr is detected by just reporting the issue and later on an out-of-bounds read on array card occurs because of this. Fix this by checking the upper range of dev->nr with the size of array card (removes the hard coded size), move this check earlier and also exit with the error -ENOSYS to avoid the later out-of-bounds array read. Detected by CoverityScan, CID#711191 ("Out-of-bounds-read") Fixes: commit 02b20b0b ("V4L/DVB (12730): Add conexant cx25821 driver") Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: %ld -> %zd] Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Christopher Díaz Riveros 提交于
Given the following definitions from s2255drv.c #define LINE_SZ_4CIFS_NTSC 640 #define LINE_SZ_2CIFS_NTSC 640 #define LINE_SZ_1CIFS_NTSC 320 and #define LINE_SZ_4CIFS_PAL 704 #define LINE_SZ_2CIFS_PAL 704 #define LINE_SZ_1CIFS_PAL 352 f->fmt.pix.width possible values can be reduced to LINE_SZ_4CIFS_NTSC or LINE_SZ_1CIFS_NTSC. This patch removes unneeded if else blocks in vidioc_try_fmt_vid_cap function. This issue was detected by using the Coccinelle software. Signed-off-by: NChristopher Díaz Riveros <chrisadr@gentoo.org> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Gustavo A. R. Silva 提交于
Assign true or false to boolean variables instead of an integer value. This issue was detected with the help of Coccinelle. Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Wei Yongjun 提交于
Fix to return error code -ENODEV from the dma_request_slave_channel() error handling case instead of 0, as done elsewhere in this function. rc can be overwrite to 0 by dmaengine_slave_config() in the for loop. Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: NRamesh Shanmugasundaram <Ramesh.shanmugasundaram@bp.renesas.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Ian Douglas Scott 提交于
Add support for a new USB ID in this driver. Signed-off-by: NIan Douglas Scott <ian@iandouglasscott.com> [hans.verkuil@cisco.com: add commit message] Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Shuah Khan 提交于
Replace GPL license statement with SPDX GPL-2.0 license identifier. Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Tomasz Figa 提交于
Currently the driver signals the source change event only in case of a midstream resolution change, however the initial format detection is also defined as a source change by the V4L2 codec API specification. Fix this by signaling the event after the initial header is parsed as well. Signed-off-by: NTomasz Figa <tfiga@chromium.org> Reviewed-by: NWu-Cheng Li <wuchengli@chromium.org> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Oliver Neukum 提交于
Quoting the original report: It looks like there is a double-free vulnerability in Linux usbtv driver on an error path of usbtv_probe function. When audio registration fails, usbtv_video_free function ends up freeing usbtv data structure, which gets freed the second time under usbtv_video_fail label. usbtv_audio_fail: usbtv_video_free(usbtv); => v4l2_device_put(&usbtv->v4l2_dev); => v4l2_device_put => kref_put => v4l2_device_release => usbtv_release (CALLBACK) => kfree(usbtv) (1st time) usbtv_video_fail: usb_set_intfdata(intf, NULL); usb_put_dev(usbtv->udev); kfree(usbtv); (2nd time) So, as we have refcounting, use it Reported-by: NYavuz, Tuba <tuba@ece.ufl.edu> Signed-off-by: NOliver Neukum <oneukum@suse.com> CC: stable@vger.kernel.org Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Xiongfeng Wang 提交于
gcc-8 reports drivers/media/media-device.c: In function 'media_device_get_topology': ./include/linux/string.h:245:9: warning: '__builtin_strncpy' specified bound 64 equals destination size [-Wstringop-truncation] We need to use strlcpy() to make sure the dest string is nul-terminated. Signed-off-by: NXiongfeng Wang <xiongfeng.wang@linaro.org> Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Philipp Zabel 提交于
While the h.264 standard only allows up to 16 reference frames, the CODA firmware needs two more buffers: one to hold the currently decoded frame and one for the display frame. Adding the framebuffer needed by the driver for VDOA operation brings the total to a maximum of 19 internal framebuffers. Lift the current maximum of 17 internal framebuffers to allow playback of high profile streams that require more than 14 reference frames. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Arnd Bergmann 提交于
After the move of videobuf2 into the common directory, selecting the au0828 driver with CONFIG_V4L2 disabled started causing a link failure, as we now attempt to build videobuf2 but it still requires v4l2: ERROR: "v4l2_event_pending" [drivers/media/common/videobuf/videobuf2-v4l2.ko] undefined! ERROR: "v4l2_fh_release" [drivers/media/common/videobuf/videobuf2-v4l2.ko] undefined! ERROR: "video_devdata" [drivers/media/common/videobuf/videobuf2-v4l2.ko] undefined! ERROR: "__tracepoint_vb2_buf_done" [drivers/media/common/videobuf/videobuf2-core.ko] undefined! ERROR: "__tracepoint_vb2_dqbuf" [drivers/media/common/videobuf/videobuf2-core.ko] undefined! ERROR: "v4l_vb2q_enable_media_source" [drivers/media/common/videobuf/videobuf2-core.ko] undefined! We want to be able to build the core au0828 support without V4L2, so this makes the 'select' conditional on V4L2, and refines the dependencies in VIDEO_AU0828_V4L2 so it can only be enabled in the exact conditions that have VIDEOBUF2_VMALLOC reachable. Fixes: 03fbdb2f ("media: move videobuf2 to drivers/media/common") Fixes: 05439b1a ("[media] media: au0828 - convert to use videobuf2") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Wei Yongjun 提交于
Fixes the following sparse warning: drivers/media/platform/atmel/atmel-isc.c:338:19: warning: symbol 'fmt_configs_list' was not declared. Should it be static? Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Acked-by: NWenyou Yang <wenyou.yang@microchip.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Philipp Zabel 提交于
Add support for the CodaHx4 VPU used on i.MX51. Decoding h.264, MPEG-4, and MPEG-2 video works, as well as encoding h.264. MPEG-4 encoding is not enabled, it currently produces visual artifacts. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: fix (bogus) sparse warning about uninited me_bits] Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Benjamin Gaignard 提交于
Add SPDX identifiers to files under stm32 directory Signed-off-by: NBenjamin Gaignard <benjamin.gaignard@st.com> Acked-by: NPhilippe Ombredanne <pombredanne@nexb.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 23 2月, 2018 2 次提交
-
-
由 Mauro Carvalho Chehab 提交于
3 warning regressions: + drivers/media/i2c/ov13858.c: warning: cast to restricted __be32: => 1093:16 + drivers/media/i2c/ov13858.c: warning: incorrect type in assignment (different base types): => 1111:13 + drivers/media/i2c/ov13858.c: warning: incorrect type in initializer (different base types): => 1071:27 Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hugues Fruchet 提交于
After a framerate update through s_frame_interval(), the new framerate was not taken into account when streaming, but was taken into account on next session. This was due to sensor->current_mode not updated accordingly to new framerate setting in ov5640_s_frame_interval(). Signed-off-by: NHugues Fruchet <hugues.fruchet@st.com> Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-