The ib_srpt driver limits max_send_sge to 16. Since that is a workaround
for an mlx4 bug that has been fixed, increase max_send_sge. See also
commit f95ccffc ("IB/mlx4: Use 4K pages for kernel QP's WQE buffer").

Link: https://lore.kernel.org/r/20200525172212.14413-5-bvanassche@acm.orgSigned-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Since srpt_post_recv() always sets num_sge to 1, reduce the max_recv_sge
parameter that is used at queue pair allocation time to 1.

Link: https://lore.kernel.org/r/20200525172212.14413-4-bvanassche@acm.orgSigned-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Since the session name by itself is not sufficient to uniquely identify a
queue pair, include the queue pair number. Show the ASCII channel state
name instead of the numeric value. This change makes the ib_srpt debug
output more consistent.

Link: https://lore.kernel.org/r/20200525172212.14413-3-bvanassche@acm.orgSigned-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Increase the flexibility of the SRP initiator driver by making the channel
count configurable per target instead of only providing a kernel module
parameter for configuring the channel count.

Link: https://lore.kernel.org/r/20200525172212.14413-2-bvanassche@acm.orgSigned-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

After users sets the ECE option, FW will return the agreed/supported bits
through an output structures of modify QP stages for regular QPs or
through create QP for the DCT.

Link: https://lore.kernel.org/r/20200526115440.205922-9-leon@kernel.orgReviewed-by: NMark Zhang <markz@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The most common way to set ECE option will be during modify QP command in
INIT2RTR, RTR2RTS and RTS2RTS stages, so update mlx5 to support it.

The new bit in the comp_mask is needed to mark that kernel supports ECE
and can receive data instead of "reserved" field in the struct
mlx5_ib_modify_qp.

Link: https://lore.kernel.org/r/20200526115440.205922-8-leon@kernel.orgReviewed-by: NMark Zhang <markz@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Instead of hand crafted mlx5_qp_context and mlx5_qp_path use common
MLX5_SET() macros.

Link: https://lore.kernel.org/r/20200526115440.205922-7-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NMark Zhang <markz@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

As a preparation to removal hand crafted mlx5_qp_context, convert
query_qp_attr() to use proper MLX5_GET() macros.

Link: https://lore.kernel.org/r/20200526115440.205922-6-leon@kernel.orgReviewed-by: NMark Zhang <markz@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

As a preparation to removal hand crafted mlx5_qp_context, convert counter
code to use mlx5_cmd_exec_in() directly.

Link: https://lore.kernel.org/r/20200526115440.205922-5-leon@kernel.orgReviewed-by: NMark Zhang <markz@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Allow users to ask creation of QPs with specific ECE options.  Such early
set even before RDMA-CM connection is established is useful if user knows
exactly which option he needs.

Link: https://lore.kernel.org/r/20200526115440.205922-4-leon@kernel.orgReviewed-by: NMark Zhang <markz@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Supported ECE options are returned from FW in the create_qp phase and zero
means that field is not valid. Such default value allows us to reuse
reserved field without worries about comp_mask.

Update create QP API to return ECE options.

Link: https://lore.kernel.org/r/20200526115440.205922-3-leon@kernel.orgReviewed-by: NMark Zhang <markz@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

IBTA declares "vendor option not supported" reject reason in REJ messages
if passive side doesn't want to accept proposed ECE options.

Due to the fact that ECE is managed by userspace, there is a need to let
users to provide such rejected reason.

Link: https://lore.kernel.org/r/20200526103304.196371-7-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The rdma_accept() is called by both passive and active sides of CMID
connection to mark readiness to start data transfer. For passive side,
this is called explicitly, for active side, it is called implicitly while
receiving REP message.

Provide ECE data to rdma_accept function needed for passive side to send
that REP message.

Link: https://lore.kernel.org/r/20200526103304.196371-6-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

ECE parameters are exchanged through REQ->REP/SIDR_REP messages, this
patch adds the data to provide to other side of CMID communication
channel.

Link: https://lore.kernel.org/r/20200526103304.196371-5-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Passive side of CMID connection receives ECE request through REQ message
and needs to respond with relevant REP message which will be forwarded to
active side.

The UCMA events interface is responsible for such communication with the
user space (librdmacm). Extend it to provide ECE wire data.

Link: https://lore.kernel.org/r/20200526103304.196371-4-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Active side of CMID initiates connection through librdmacm's
rdma_connect() and kernel's ucma_connect(). Extend UCMA interface to
handle those new parameters.

Link: https://lore.kernel.org/r/20200526103304.196371-3-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Extend REQ (request for communications), REP (reply to request for
communication), rejected reason and SIDR_REP (service ID resolution
response) structures with hardware vendor ID bits according to IBTA v1.4.

Link: https://lore.kernel.org/r/20200526103304.196371-2-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

From the mlx5-next branch at
  git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux

Required for dependencies in following patches

* branch 'mellanox/mlx5-next':
  net/mlx5: Add ability to read and write ECE options
  net/mlx5: Add support for RDMA TX FT headers modifying
  net/mlx5: Move iseg access helper routines close to mlx5_core driver
  net/mlx5: Cleanup mlx5_ifc_fte_match_set_misc2_bits
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The commit citied in the Fixes line wasn't complete and solved
only part of the problems. Update the mlx5_ib to properly support
MLX5_CMD_OP_INIT2INIT_QP command in the DEVX, that is required when
modify the QP tx_port_affinity.

Fixes: 819f7427 ("RDMA/mlx5: Add init2init as a modify command")
Link: https://lore.kernel.org/r/20200527135703.482501-1-leon@kernel.orgSigned-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Make use of the sizeof_field() helper instead of an open-coded version.

Link: https://lore.kernel.org/r/20200527144152.GA22605@embeddedorSigned-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The end result of RDMA-CM ECE handshake is ECE options, which is
needed to be used while configuring data QPs. Such options can
come in any QP state, so add in/out fields to set and query
ECE options.

OUT fields:
* create_qp() - default ECE options for that type of QP.
* modify_qp() - enabled ECE options after QP state transition.

IN fields:
* create_qp() - create QP with this ECE option.
* modify_qp() - requested options. For unconnected QPs, the FW
will return an error if ECE is already configured with any options
that not equal to previously set.
Reviewed-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

can_sleep is always 0 when iboib_mcast_alloc() is called, so remove it and
use GFP_ATOMIC instead of GFP_KERNEL.

Link: https://lore.kernel.org/r/20200525130305.171509-1-kamalheib1@gmail.comSigned-off-by: NKamal Heib <kamalheib1@gmail.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Remove device specific debugfs entries immediately if LLD detaches a
particular ULD device in case of fatal PCI errors.

Link: https://lore.kernel.org/r/20200524190814.17599-1-bharat@chelsio.comSigned-off-by: NPotnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Instead of i with the sge number of wr will make the comparision more
clear, that is, when the sge number in wr is small than the maximum
supported sge number in the queue, then a stop sge needed to be filled at
the end of sges in wr.

Link: https://lore.kernel.org/r/1590152579-32364-5-git-send-email-liweihang@huawei.comSigned-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Set hns_roce_v2_cq_set_ci to inline type and remove unnecessary
next_cqe_sw_v2().

Link: https://lore.kernel.org/r/1590152579-32364-4-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The redundant parameters "hr_dev" need to be removed from
free_kernel_wrid() and free_srq_wrid().

Link: https://lore.kernel.org/r/1590152579-32364-3-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

There is no need to do a type cast on genernal pointers, they could be
assigned to any type of variables. In addition, optimize initialization of
some variables and adjust order of them.

Link: https://lore.kernel.org/r/1590152579-32364-2-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Currently, the MTR region is configed before hns_roce_mtr_map() is
invoked, but in some scenarios, the region is configed at MTR creation,
the caller need to store this config and call hns_roce_mtr_map() later. So
optimize the usage by wrapping the MTR region config into MTR.

Link: https://lore.kernel.org/r/1589982799-28728-10-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Split the code related to WQE buffer configure from the QPC filling
process into two functions: config_qp_sq_buf() and config_qp_rq_buf(),
this will make the code more readable.

Link: https://lore.kernel.org/r/1589982799-28728-9-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Number of sge/eqe is always non-negative, they should be defined in type
of unsigned.

Link: https://lore.kernel.org/r/1589982799-28728-8-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

page_shift is used to calculate the page size, it's always non-negative,
and should be in type of unsigned.

Link: https://lore.kernel.org/r/1589982799-28728-7-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Rename the function related to QP buffer to make the code more readable.

Link: https://lore.kernel.org/r/1589982799-28728-6-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The codes related to assert are no longer used and need to be deleted.

Link: https://lore.kernel.org/r/1589982799-28728-5-git-send-email-liweihang@huawei.comSigned-off-by: NYangyang Li <liyangyang20@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add unlikely() and likely() to optimize main I/O process code.

Link: https://lore.kernel.org/r/1589982799-28728-4-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

It's easier to understand and maintain enable flags of cq using a single
field in type of u32 than defining a field for every flags in the
structure hns_roce_cq, and we can add new flags for features more
conveniently in the future.

Link: https://lore.kernel.org/r/1589982799-28728-3-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The hardware can truncate PI/CI when posting or polling, the driver does
not need to do truncation. Therefore keep the software's PI/CI consistent
with it in the hardware.

Link: https://lore.kernel.org/r/1589982799-28728-2-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The macros do_each_path/while_each_path lead to a smatch warning:

drivers/infiniband/ulp/rtrs/rtrs-clt.c:1196 rtrs_clt_failover_req() warn: inconsistent indenting
drivers/infiniband/ulp/rtrs/rtrs-clt.c:2890 rtrs_clt_request() warn: inconsistent indenting

Also checkpatch complains:
ERROR: Macros with multiple statements should be enclosed in a do - while loop

The macros are used only in two places: for a normal IO path and for the
failover path triggered after errors.

Get rid of the macros and just use a for loop iterating over the list of
paths in both places. It is easier to read and also less lines of code.

Fixes: 6a98d71d ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20200522053924.528980-1-danil.kipnis@cloud.ionos.comReported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NDanil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The rtrs_sess structure has already been extracted above from the
rtrs_srv_sess structure. Use that to avoid redundant dereferencing.

Fixes: 9cb83748 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20200522082833.1480551-1-haris.phnx@gmail.comSigned-off-by: NMd Haris Iqbal <haris.phnx@gmail.com>
Acked-by: NDanil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

module_is_live function is only defined when CONFIG_MODULES is enabled.
Use try_module_get instead to check whether the module is being removed.

When module unload and manuall unmapping is happening in parallel, we can
try removing the symlink twice: rnbd_client_exit
vs. rnbd_clt_unmap_dev_store.

This is probably not the best way to deal with this race in general, but
for now this fixes the compilation issue when CONFIG_MODULES is disabled
and has no functional impact. Regression tests passed.

Fixes: 1eb54f8f ("block/rnbd: client: sysfs interface functions")
Link: https://lore.kernel.org/r/20200521185909.457245-1-danil.kipnis@cloud.ionos.comReported-by: NRandy Dunlap <rdunlap@infradead.org>
Suggested-by: NGuoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: NDanil Kipnis <danil.kipnis@cloud.ionos.com>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The allocated ports structure in never freed. The free function should be
called by release_cma_ports_group, but the group is never released since
we don't remove its default group.

Remove default groups when device group is deleted.

Fixes: 045959db ("IB/cma: Add configfs for rdma_cm")
Link: https://lore.kernel.org/r/20200521072650.567908-1-leon@kernel.orgSigned-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>