- 12 7月, 2011 1 次提交
-
-
由 Daniel Drake 提交于
When commands time out, corruption ensues. As lbs_complete_command() is called without locking, the command node is mistakenly freed twice. Also fixed up locking here in a few other places. The nature of command timeout may be that the card didn't even acknowledge receipt of the request. Detect this case and reset dnld_sent so that other commands don't hang forever. When cmdnodes are moved between the free list and the pending list, their list heads should be reinitialized. Fixed this. Sometimes commands are completed without actually submitting them or removing them from cmdpendingq. We must remember to remove them from cmdpendingq in these cases, so handle this in lbs_complete_command(). Harmless signals generated during suspend/resume were interrupting lbs_cmd. Convert to an uninterruptible sleep to avoid this. lbs_thread must be woken up every time there is some new work to do. I found that when 2 commands are queued, ther completion of the first command would not wake up lbs_thread to submit the second. Poke lbs_thread at the end of lbs_complete_command() to fix this. Signed-off-by: NDaniel Drake <dsd@laptop.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 12 5月, 2011 2 次提交
-
-
由 Joe Perches 提交于
Using the more descriptive logging styles gives a bit more information about the device being operated on. Makes the object trivially smaller too. $ size drivers/net/wireless/libertas/built-in.o.* 187730 2973 38488 229191 37f47 drivers/net/wireless/libertas/built-in.o.new 188195 2973 38488 229656 38118 drivers/net/wireless/libertas/built-in.o.old Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Joe Perches 提交于
Use the standard pr_<level> functions eases grep a bit. Added a few missing terminating newlines to messages. Coalesced long formats. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 29 4月, 2011 1 次提交
-
-
由 Randy Dunlap 提交于
Convert all libertas/ files to use kernel-doc notation instead of whatever it was (doxygen?). Add or fix function parameters in several places. Use expected style for multi-line comments in lots of places. Remove erroneous /** in multiple places. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 28 7月, 2010 11 次提交
-
-
由 Dan Williams 提交于
Remove last bits of indirect command code. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
Powersave looks like it got broken at some point but we'll fix that up when the command submission stuff is more understandable, which this series helps to do. That said, this patch should not further break powersave. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
Slightly different approach here since there are so many arguments to the firmware command. Just let the caller fill them in before pushing the command to the firmware. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
For now; it's a pretty easy command to hook up and whenever OLPC figures out how they want the userspace interface to look (ie, not iwpriv commands) we can easily add it back in. Since the cfg80211 conversion it wasn't working anyway. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
It hasn't been hooked up to anything in a long time and it's not even listed in any of the firmware documentation I have (and I have v5.1, v8, v9, and v10). Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
These were no longer used but were left around; Transmit Power Control is done through the lbs_set_tpc_cfg() function. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
Convert to a full direct command; previous code rolled a direct command by hand but left the original indirect command code intact but disabled. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 24 6月, 2010 4 次提交
-
-
由 John W. Linville 提交于
Probably little risk of namespace polution, but good practice... :-) Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Kiran Divekar 提交于
Added 11d support for libertas driver using cfg80211. This is based on Holger Shurig's initial work to add cfg80211 support libertas. (https://patchwork.kernel.org/patch/64286/) Please let us know, if there are any improvements comments. Code is added to send 11d enable command to firmware while initialisation and pass 11d specific information to firmware when notifier handler is called by cfg80211. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Kiran Divekar 提交于
In following scenarios WARN_ON() in cfg80211 code was triggered. a) Driver unload or card removal. b) Disconnect from infra network c) Adhoc start/join d) Adhoc stop Added following fixes to avoid WARN_ON() in cfg80211 code. a) Ensured that cfg80211_disconnected() function defined in cfg80211 code will be called only in infra mode. b) Solved timing issue by moving cfg80211_disconnected() call inside lbs_cfg_disconnect(). c) Updated "wdev->ssid" in driver code after Adhoc join/start d) Removed unnecessory cfg80211_disconnected() call in lbs_remove_card. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Kiran Divekar 提交于
Holger Schurig's patch (https://patchwork.kernel.org/patch/64286/) is rebased to latest wireless-testing tree. (Includes patches from me originally posted as "libertas: fix build error due to undefined symbol" and "libertas: unmangle capability value". -- JWL) Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Tested-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 03 6月, 2010 1 次提交
-
-
由 Amitkumar Karwar 提交于
In suspend() host sleep is activated using already configured host sleep parameters through wol command, and in resume() host sleep is cancelled. Earlier priv->fw_ready flag used to reset and set in suspend and resume handler respectively. Since after suspend only host goes into sleep state and firmware is always ready, those changes in flag state are removed. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 09 2月, 2010 1 次提交
-
-
由 Holger Schurig 提交于
Retrying commands seldomly works, most often the firmware is in a weird state anyway and needs the device to reset. So it's better to report the broken state back to user-space. Also rename command_timer_fn() into lbs_cmd_timeout_handler(), which better reflect it's usage. Signed-off-by: NHolger Schurig <holgerschurig@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 23 12月, 2009 1 次提交
-
-
由 Holger Schurig 提交于
mesh_autostart_enabled was nowhere set. Rumor is that this is used in the OLPC tree, but they never did submit their code upstream. After removing this code, it turned out that the sync_channel stuff is now also unused, so get rid of that as well. Signed-off-by: NHolger Schurig <holgerschurig@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 28 10月, 2009 8 次提交
-
-
由 Holger Schurig 提交于
... because for cfg80211 we'll need a completely different implementation. Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
... which just resided as an old-style command in cmd/cmdresp, but was nowhere useed. If we ever need it, we can re-add it as a newstyle command. Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
... which just resided as an old-style command in cmd/cmdresp, but was nowhere useed. If we ever need it, we can re-add it as a newstyle command. Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
That's because the new cfg80211 implementation will provide cleaner implementations. No functional changes. Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
Most of the 11d code was protected with an "if (priv->enable11d)" clause. But there was no code that anywhere that was able to set this variable to true. So all 11d code was dead for almost a year and no one complained. That's enought incentive to remove this code. Besides removing old cruft, we gain back the 11d capability in a common way when we merge the cfg80211 functionality. Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
* move declarations for functions of cmd.c/cmdresp.c into cmd.h * move declarations from cmd.h that are in main.c to decl.h * group command functions Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 13 10月, 2009 2 次提交
-
-
由 Alan Cox 提交于
drivers/net/wireless/libertas/cmdresp.c: In function ‘lbs_process_event’: drivers/net/wireless/libertas/cmdresp.c:519: error: ‘TASK_INTERRUPTIBLE’ undeclared (first use in this function) drivers/net/wireless/libertas/cmdresp.c:519: error: (Each undeclared identifier is reported only once drivers/net/wireless/libertas/cmdresp.c:519: error: for each function it appears in.) Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alan Cox 提交于
drivers/net/wireless/libertas/cmdresp.c: In function ‘lbs_process_event’: drivers/net/wireless/libertas/cmdresp.c:519: error: ‘TASK_INTERRUPTIBLE’ undeclared (first use in this function) drivers/net/wireless/libertas/cmdresp.c:519: error: (Each undeclared identifier is reported only once drivers/net/wireless/libertas/cmdresp.c:519: error: for each function it appears in.) Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 08 10月, 2009 1 次提交
-
-
由 Amitkumar Karwar 提交于
Add timer based auto deep sleep feature in libertas driver which can be configured using iwconfig command. This is tested on SD8688, SD8686 cards with firmware versions 10.38.1.p25, 9.70.4.p0 respectively on 32-bit and 64-bit platforms. Tests have been done for USB/CS cards to make sure that the patch won't break USB/CS code. We didn't test the if_spi driver. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 04 6月, 2009 3 次提交
-
-
由 Cliff Cai 提交于
Signed-off-by: NCliff Cai <cliff.cai@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NBryan Wu <cooloney@kernel.org> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
And fix up setting authentication suite for v9+ firmware too. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 16 9月, 2008 2 次提交
-
-
由 Dan Williams 提交于
And support setting both long and short retries independently. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
The generic reset command is unused. Each interface type needs to handle the reset command differently since after reset, the firmware is dead and interface-specific mechanisms must be used to reinitialize the card. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 30 8月, 2008 1 次提交
-
-
由 Dan Williams 提交于
with fixes for v9 and later firmware too. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-