- 07 6月, 2009 15 次提交
-
-
由 Peter P Waskiewicz Jr 提交于
This adds a second feature flag variable to use for future feature expansion. Add HW RSC to this new feature flags variable. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch moves the tx cleanup processing out of the MSI-X interrupt processing and gives it it's own napi routine. This allows the driver to process TX cleanup in a polling context instead of in an interrupt context which prevents TX from starving RX. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
The v_idx value was being used as both a bitmask and an index. This change makes it so that the q_vector contains the index and allows for much of the code to be simplified since disabling a q_vector involves only clearing one bit in the interrupt bitmask. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch changes the driver so that it uses rx_buffer_info->dma to determine if it needs to unmap the page instead of sh_info->nr_frags. This helps to prevent a cache line miss when receiving small packets as the rx_buffer_info data should already be in the cache. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mallikarjuna R Chilakala 提交于
Add ethtool support to change advertised link modes/autoneg settings of 82599 multispeed fiber adapters. Signed-off-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mallikarjuna R Chilakala 提交于
Fix autoneg restart issues in flow control path which might create endless link flickering due to known timing issues with 82599 adapters. Signed-off-by: NMallikarjuna R Chilakala <mallikarjuna.chilakakla@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter P Waskiewicz Jr 提交于
82599 supports multispeed fiber optical modules (10Gbps/1Gbps). Some scenarios can cause the autotry mechanism to not negotiate link properly. What needs to happen is the driver must flap the Tx laser to induce an Rx Loss of Signal on the link partner. This will restart the autotry mechanism to get link into a known state. The software definable pin (SDP) 3 on the 0x10fb NIC is wired to cause a Tx LOS event, which triggers the Rx LOS we require. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Acked-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter P Waskiewicz Jr 提交于
This patch adds support for the ethtool internal test engine. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter P Waskiewicz Jr 提交于
When reprogramming the 82599 analog PHY to either SFI optical or Direct Attach Twinax, we need to restart the DSP in the PHY. The current method can cause contention with our FW which is managing PHY state, and will cause unexpected link flaps. This patch fixes the DSP restart by issuing an AN_RESTART in the MAC, which will properly propagate the DSP restart to the PHY. This ensures we don't collide with the FW. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter P Waskiewicz Jr 提交于
The 82599 KX4 device defaults to legacy power management, or APME. This puts the device into ACPI mode, which allows more robust WoL setups to work properly. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Beregalov 提交于
Commit 1f87f7d3 (cfg80211: add rfkill support) added ERFKILL to asm-generic/errno.h, but alpha, mips, parisc and sparc use their own numbering scheme and do not include asm-generic/errno.h. We need to add definition of ERFKILL for them. Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com> Acked-by: NRalf Baechle <ralf@linux-mips.org> Acked-by: NKyle McMartin <kyle@mcmartin.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ayaz Abdulla 提交于
This patch removes the forcedeth device ids from pci_ids.h The forcedeth driver uses the device id constants directly in its source file. [ Need to keep PCI_DEVICE_ID_NVIDIA_NVENET_15 in order to keep drivers/pci/quirks.c building -DaveM ] Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ayaz Abdulla 提交于
This patch adds a new device id for mcp89 chipset. Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ayaz Abdulla 提交于
This patch removes the device id macros and instead uses the constants directly. The areas in which logic expressions where using the macros now instead use feature/workaround flags. No new functionality has been introduced in this patch, only clean up of flags and macros. Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 6月, 2009 25 次提交
-
-
由 Johannes Berg 提交于
My mistake, I should have added that when cleaning up rfkill and changing wimax. Reported-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NInaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch removes code (deprecated by "cfg80211: add rfkill support" ) main.c: In function 'ar9170_op_config': main.c:1306: warning: '__IEEE80211_CONF_CHANGE_RADIO_ENABLED' is deprecated (declared at include/net/mac80211.h:551) and a useless device state. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Reinette Chatre 提交于
Fixing a comment in the code describing this module parameter. The description printed when user runs "modinfo" is correct. Reported-by: NJiajia Zheng <jiajia.zheng@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
Instead of hardcoding the link quality parameters inside the functions, adding #define in iwl-commands.h to shared by different functions. Also include the valid range for number of link quality parameters. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Mohamed Abbas 提交于
Wait until ucode is loaded and driver receive ALIVE_REPLY then switch to ICT interrupt. This ensures we receive all interrupts indicating successful ucode load. Signed-off-by: NMohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abhijeet Kolekar 提交于
Patch fixes the bug at http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1903 when SW rfkill is invoked by 'iwconfig txpower off', the existing connection disassociates and led off command is sent to the device which returns error as rfkill is 'true'. Patch fixes this by just avoiding sending the led off/on command when disassociated. The main purpose of the led_disassociate callback is to start or stop the blinking. There are three states in led 1) Always on when radio is on 2) Always off when radio is off 3) blink when associated and if there is some traffic. In this callback 'allow_blinking' needs to be set false when associated, as LED will be always on. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abhijeet Kolekar 提交于
Port "iwlcore: Allow skb allocation from tasklet." to 3945 If RX queue becomes empty then we need to restock the queue from tasklet to prevent ucode from starving. A caller to iwl_rx_allocate will decide if allocated buffer should come from GFP_ATOMIC or GFP_KERNEL. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch unifies 3945 and AGN station management It also removes useless struct iwl_station_mgmt ops and cleanups a bit the interface Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Tested-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Chaithrika U S 提交于
Use printk format specifier for MAC address. Remove DECALRE_MAC_BUF and print_mac() usage in the driver. Signed-off-by: NChaithrika U S <chaithrika@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
When I added socket accounting to tun I inadvertently introduced spurious wake-up events that kills qemu performance. The problem occurs when qemu polls on the tun fd for read, and then transmits packets. For each packet transmitted, we will wake up qemu even if it only cares about read events. Now this affects all sockets, but it is only a new problem for tun. So this patch tries to fix it for tun first and we can then look at the problem in general. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rami Rosen 提交于
ip_mc_drop_socket() method is declared in linux/igmp.h, which is included anyhow in af_inet.c. So there is no need for this declaration. This patch removes it from af_inet.c. Signed-off-by: NRami Rosen <ramirose@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
As it stands skb fraglists can get past the check in dev_queue_xmit if the skb is marked as GSO. In particular, if the packet doesn't have the proper checksums for GSO, but can otherwise be handled by the underlying device, we will not perform the fraglist check on it at all. If the underlying device cannot handle fraglists, then this will break. The fix is as simple as moving the fraglist check from the device check into skb_gso_ok. This has caused crashes with Xen when used together with GRO which can generate GSO packets with fraglists. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Divy Le Ray 提交于
Use generic MDIO generic values. Based on Ben Hutchings'review comments. Signed-off-by: NDivy Le Ray <divy@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Divy Le Ray 提交于
Update FW to 7.4. Bump up driver revision. Signed-off-by: NDivy Le Ray <divy@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
* iwm doesn't depend on cfg80211 or wireless extensions * rndis wlan selects cfg80211 - needs to depend * mac80211 selects cfg80211 - needs to depend Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Add some blurb about /dev/rfkill to the documentation and fix the "transmiter" spelling error. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The rfkill core didn't initialise the poll delayed work because it assumed that polling was always done by specifying the poll function. cfg80211, however, would like to start polling only later, which is a valid use case and easy to support, so change rfkill to always initialise the poll delayed work and thus allow starting polling by calling the rfkill_resume_polling() function after registration. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bob Copeland 提交于
When we remove the active interface, there's no need to continue sending beacons; doing so would cause a null pointer deref in ieee80211_beacon_get(). Disable the interrupt in remove_interface and add a WARN_ON(!vif) in case there are other instances lurking. Signed-off-by: NBob Copeland <me@bobcopeland.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
Fixes spares warning: net/wireless/util.c:261:5: warning: symbol 'ieee80211_get_mesh_hdrlen' was not declared. Should it be static? Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
This should help when reviewing issues regarding regulatory domain on ath5k/ath9k/ar9170. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
Handle error condition on copy_from_user() properly and make sure a NUL terminated char[] is sent to strict_strtoul() for proper conversion. Signed-off-by: NVasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Which means removing all rfkill code since it only does soft-kill which cfg80211 will now handle in exactly the same way the driver did. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-