This cleanup is prepare to move the driver to drivers/gpio. Custom
definitions of gpio_get_value()/gpio_set_value() are dropped.
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NHuacai Chen <chenhc@lemote.com>
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Even if bus is not hot-pluggable, the devices can be unbound from the
driver via sysfs, so we should not be using __exit annotations on
remove() methods. The only exception is drivers registered with
platform_driver_probe() which specifically disables sysfs bind/unbind
attributes.
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Now OMAP GPIO driver prepared for GPIO_INDEX() macro removing.
Do It ;)
Tested-by: NTony Lindgren <tony@atomide.com>
Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: NSantosh Shilimkar <ssantosh@kernel.org>
Acked-by: NJavier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: NGrygorii Strashko <grygorii.strashko@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Now OMAP GPIO driver prepared for omap_irq_to_gpio() removing.
Do it ;)
Tested-by: NTony Lindgren <tony@atomide.com>
Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: NSantosh Shilimkar <ssantosh@kernel.org>
Acked-by: NJavier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: NGrygorii Strashko <grygorii.strashko@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Now OMAP GPIO driver prepared for GPIO_BIT() macro removing.
Do it ;)
Tested-by: NTony Lindgren <tony@atomide.com>
Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: NSantosh Shilimkar <ssantosh@kernel.org>
Acked-by: NJavier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: NGrygorii Strashko <grygorii.strashko@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Convert GPIO IRQ functions to use GPIO offset instead of system
GPIO numbers. This allows to drop unneeded conversations between
system GPIO <-> GPIO offset which are done in many places and
many times.
It is safe to do now because:
- gpiolib always passes GPIO offset to GPIO controller
- OMAP GPIO driver converted to use IRQ domain, so
  struct irq_data->hwirq contains GPIO offset

This is preparation step before removing:
 #define GPIO_INDEX(bank, gpio)
 #define GPIO_BIT(bank, gpio)
 int omap_irq_to_gpio()
Tested-by: NTony Lindgren <tony@atomide.com>
Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: NSantosh Shilimkar <ssantosh@kernel.org>
Acked-by: NJavier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: NGrygorii Strashko <grygorii.strashko@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The 'gpio' parameter isn't needed any more as it
duplicates 'offset' parameter, so drop it.
Tested-by: NTony Lindgren <tony@atomide.com>
Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: NSantosh Shilimkar <ssantosh@kernel.org>
Acked-by: NJavier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: NGrygorii Strashko <grygorii.strashko@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Convert debounce functions to use GPIO offset instead of system
GPIO numbers. This allows to drop unneeded conversations between
system GPIO <-> GPIO offset which are done in many places and
many times.
It is safe to do now because:
- gpiolib always passes GPIO offset to GPIO controller
- OMAP GPIO driver converted to use IRQ domain

This is preparation step before removing:
 #define GPIO_INDEX(bank, gpio)
 #define GPIO_BIT(bank, gpio)
 int omap_irq_to_gpio()
Tested-by: NTony Lindgren <tony@atomide.com>
Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: NSantosh Shilimkar <ssantosh@kernel.org>
Acked-by: NJavier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: NGrygorii Strashko <grygorii.strashko@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Both functions omap_set_gpio_dataout_reg() and
omap_set_gpio_dataout_mask() accept GPIO offset
as 'gpio' input parameter, so rename it to 'offset' and
drop usage of GPIO_BIT() macro.
Tested-by: NTony Lindgren <tony@atomide.com>
Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: NSantosh Shilimkar <ssantosh@kernel.org>
Acked-by: NJavier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: NGrygorii Strashko <grygorii.strashko@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Convert omap_gpio_is_input() to use GPIO offset instead of mask and,
in such way, make code simpler and remove few lines of code.
Tested-by: NTony Lindgren <tony@atomide.com>
Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: NSantosh Shilimkar <ssantosh@kernel.org>
Acked-by: NJavier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: NGrygorii Strashko <grygorii.strashko@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

When the GPIO module is needed for wake-up, it's module clock must not
be disabled. Hence implement irq_chip.irq_set_wake(), which
increments/decrements the clock's enable_count when needed, and forwards
the wake-up state to the upstream interrupt controller.

This fixes wake-up from s2ram using gpio-keys when using a PM Domain to
manage the module clock.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The existing variable gpio_chip already points to the gpiochip instance,
hence use it everywhere.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Export PANEL_EN/DISABLE (offset 0x52) as additional GPIO. Needed
by display driver to enable the DSI panel on BYT platform where
the Panel EN/Disable control is routed thorugh CRC PMIC

CC: Samuel Ortiz <sameo@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: NDaniel Vetter <daniel@ffwll.ch>
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The Intel Quark SoC contains the DW GPIO on board. While fixing the build error
the commit 1972c97d (gpio: dwapb: fix compile errors) disables the
possibility to build the driver on X86, i.e. Intel Quark.

The patch reenables it for Intel Quark as well.

Since we have Intel Quark SoC introduced in 4.0-rc1 I would like to make this
fix available there as well, though the actual MFD driver [1] is applied only
for next version.

[1] https://lkml.org/lkml/2015/2/1/217

Fixes: 1972c97d (gpio: dwapb: fix compile errors)
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

In acpi_gpiochip_request_interrupts() the handle local
variable already contains the value that we want to pass
to acpi_walk_resources(), so it is better to use that
variable instead of evaluating ACPI_HANDLE() once more
for the same device.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

If dev is NULL in __gpiod_get_index() and both ACPI and OF are
enabled, it will be checked twice before the code decides to give
up with DT/ACPI lookup, so avoid that.

Also use the observation that ACPI_COMPANION() is much more efficient
than ACPI_HANDLE(), because the latter uses the former and carries out
a check and a pointer dereference on top of it, so replace the
ACPI_HANDLE() check with an ACPI_COMPANION() one which does not
require the additional IS_ENABLED(CONFIG_ACPI) check too.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NHanjun Guo <hanjun.guo@linaro.org>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

These functions do not belong in <asm-generic/gpio.h> since the
split into separate GPIO headers under <linux/gpio/*>. Move them
to <linux/gpio/driver.h> as is apropriate.
Acked-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Add support for the GPIOs found on the Fintek SuperI/O chip F71869A,
such as the one found on the Jetway JNF99-525 motherboard, to the f7188x
gpio driver.
Signed-off-by: NAndreas Bofjall <andreas@gazonk.org>
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Add support for the GPIOs found on the Fintek SuperI/O chip F71869, such
as the one found on the Jetway NF96u-525 motherboard, to the f7188x gpio
driver.
Signed-off-by: NAndreas Bofjall <andreas@gazonk.org>
Tested-by: NLes Schaffer <schaffer@optonline.net>
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The company is called "Fintek", not "Fintech". Fix it.
Signed-off-by: NAndreas Bofjall <andreas@gazonk.org>
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Commit 1feb57a2
"gpio: add parameter to allow the use named gpios"
includes a double-consted array. What we want is not
const const * but const * const (const pointer to const
data). Fix this.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: Olliver Schinagl <oliver@schinagl.nl>
Cc: Rojhalat Ibrahim <imr@rtschenk.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

GPIOLib core implemnts irqchip->irq_request/release_resources callbacks
internally and these callbacks already contain clalls of
gpiochip_lock/unlock_as_irq().

Hence, remove unnecessary call of gpiochip_unlock_as_irq() from
omap_gpio_irq_shutdown().
Signed-off-by: NGrygorii Strashko <grygorii.strashko@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Extend the documentation for the gpiod_set_array() functions and elaborate
a bit on possible use cases.
Signed-off-by: NRojhalat Ibrahim <imr@rtschenk.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

fix typo in the document.
Signed-off-by: NJosh Wu <josh.wu@atmel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The macro BANK_OFF which calculates the base offset for each GPIO port.
The macro is needlessly complex and unreadable. Simplify the
calculation to a simple math operation.
Signed-off-by: NRob Herring <robh@kernel.org>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Hisilicon arm64 soc uses designWare gpio, re-enable it after
commit 1972c97d(gpio: dwapb: fix compile errors).
Signed-off-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Adds a new driver device tree binding for Altera soft GPIO IP
Signed-off-by: NTien Hock Loh <thloh@altera.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Adds a new driver for Altera soft GPIO IP. The driver is able to do
read/write and allows GPIO to be a interrupt controller.

Tested on Altera GHRD on interrupt handling and IO.

v10:
- Updated conflicting device tree parameters
- Removed unused headers
- Used macro instead of magic numbers for ngpio
- Code readability cleanup using ?: and temporal variables
- Removed leftover garbage and unnecessary function calls
- Checked bgpio_init but unusable because Altera GPIO may not
  be a multiple of 8 bits

v9:
- Removed duplicated initialization on set_type using temporals
  to improve code readability in calling generic_handle_irq
- Using ?: ternary to reduce code size

v8:
- Using for_each_set_bit
- Added const for struct definition
- Removed naggy pr_err
- Sort alpha header
- Remove unused macros
- Use fixed width data types instead of unsigned long
- Whitespace issue fixes
- Removed _relaxed function for better compatibility across different
  CPU
- Changed irq_create_mapping to platform_get_irq updated implementation
  to use gpiochip_irqchip_add
- Reserve interrupt-cells number 2 in device tree binding for future
  use
- Remove confusing sections on devicetree bindings
- Added tristate Kconfig help text

v7:
- Used dev_warn instead of pr_warn
- Clean up unnecesarry if else indentation

v6:
- Added irq_startup and irq_shutdown
- Changed bitwise clamping style
- Cleanup bitwise operation to improve readability change naming of
  mapped irqs from virq to mapped_irq

v5:
- Dispose irq_domain mapping correctly
- Update optional binding description in binding docs

v4:
- Added vendor prefix to devicetree binding for IP specific properties
  using MMIO GPIO helper library instead of manually map PIO to memory
- altera_gpio_chip inline struct documentation to kerneldoc
- Using dev_ print to print a better failure message

v2, v3:
- Do not reference NO_IRQ
- Updated irq_set_type to only allow the hardware configured irq type
Signed-off-by: NTien Hock Loh <thloh@altera.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Add device managed variants of gpiod_get_array() / gpiod_put_array()
functions for conveniently obtaining and disposing of an entire array
of GPIOs with one function call.
Signed-off-by: NRojhalat Ibrahim <imr@rtschenk.de>
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Introduce new functions for conveniently obtaining and disposing of
an entire array of GPIOs with one function call.

ACPI parts tested by Mika Westerberg, DT parts tested by Rojhalat
Ibrahim.

Change log:
v5: move the ACPI functions to gpiolib-acpi.c
v4: - use shorter names for members of struct gpio_descs
    - rename lut_gpio_count to platform_gpio_count for clarity
    - add check for successful memory allocation
    - use ERR_CAST()
v3: - rebase on current linux-gpio devel branch
    - fix ACPI GPIO counting
    - allow for zero-sized arrays
    - make the flags argument mandatory for the new functions
    - clarify documentation
v2: change interface
Suggested-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NRojhalat Ibrahim <imr@rtschenk.de>
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: NRojhalat Ibrahim <imr@rtschenk.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Avoid multiple identical definitions of the gpio suffix strings by putting
them into a global constant array.
Signed-off-by: NRojhalat Ibrahim <imr@rtschenk.de>
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The gpio binding document says that new code should always use named
gpios. Patch 40b73183 added support to parse a list of gpios from child
nodes, but does not make it possible to use named gpios. This patch adds
the con_id property and implements it is done in gpiolib.c, where the
old-style of using unnamed gpios still works.
Signed-off-by: NOlliver Schinagl <oliver@schinagl.nl>
Acked-by: NBryan Wu <cooloney@gmail.com>
Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The pcf857x GPIO and interrupt controller uses dummy_irq_chip, which
does not implement irq_chip.irq_set_wake() and does not set
IRQCHIP_SKIP_SET_WAKE.

This causes two s2ram issues if wake-up is enabled for the pcf857x GPIO
pins:
  1. During resume from s2ram, the following warning is printed:

     WARNING: CPU: 0 PID: 1046 at kernel/irq/manage.c:537 irq_set_irq_wake+0x9c/0xf8()
     Unbalanced IRQ 113 wake disable

  2. Wake-up through the pcf857x GPIO pins may fail, as the parent
     interrupt controller may be suspended.

Migrate the pcf857x GPIO and interrupt controller from dummy_irq_chip to
its own irq_chip. This irq chip implements irq_chip.irq_set_wake() to
propagate its wake-up setting to the parent interrupt controller.

This fixes wake-up through gpio-keys on sh73a0/kzm9g, where the pcf857x
interrupt is cascaded to irq-renesas-intc-irqpin, and the latter must
not be suspended when wake-up is enabled.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Switch the PCF857x GPIO driver to use the gpiolib irqchip helpers.
This driver uses a nested threaded interrupt, hence handle_nested_irq()
and gpiochip_set_chained_irqchip() must be used.

Note that this removes the checks added in commit 21fd3cd1
("gpio: pcf857x: call the gpio user handler iff gpio_to_irq is done"),
as the interrupt mappings are no longer created on-demand by the driver,
but by gpiochip_irqchip_add() during initialization.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Add GPIO hogging documentation to gpio.txt
Signed-off-by: NBenoit Parrot <bparrot@ti.com>
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Based on Boris Brezillion's work this is a reworked patch
of his initial GPIO hogging mechanism.
This patch provides a way to initially configure specific GPIO
when the GPIO controller is probed.

The actual DT scanning to collect the GPIO specific data is performed
as part of gpiochip_add().

The purpose of this is to allow specific GPIOs to be configured
without any driver specific code.
This is particularly useful because board design are getting
increasingly complex and given SoC pins can now have more
than 10 mux values, a lot of connections are now dependent on
external IO muxes to switch various modes.

Specific drivers should not necessarily need to be aware of
what accounts to a specific board implementation. This board level
"description" should be best kept as part of the dts file.
Signed-off-by: NBenoit Parrot <bparrot@ti.com>
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Take a sweep to bring the irq support for the MAX732x expanders
into the gpiolib core to cut down on duplicated code.

Only compile tested! I need some feedback from people using this
expander with interrupts to tell me if things go right or
wrong when I do this.

Cc: Semen Protsenko <semen.protsenko@globallogic.com>
Cc: Mans Rullgard <mans@mansr.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>