Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>

The KFD VMID assignment was hard-coded in a few places. Consolidate that in
a single variable adev->vm_manager.first_kfd_vmid. The value is still
assigned in gmc-ip-version-specific code.
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Used sparse(make C=1) to find these loose ends.

v2:
removed unwanted extra line
Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Compute IBs need this too.

v2: split out version bump
v3: squash in emit frame count fixes
Signed-off-by: NMarek Olšák <marek.olsak@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Implement the .mem_sync hook defined earlier.

v2: Rename functions
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NLuben Tuikov <luben.tuikov@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move from a per-CS secure flag (TMZ) to a per-IB
secure flag.
Signed-off-by: NLuben Tuikov <luben.tuikov@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch expands the context control function to support trusted flag while we
want to set command buffer in trusted mode.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

According to the current kiq read register method,
there will be race condition when using KIQ to read
register if multiple clients want to read at same time
just like the expample below:
1. client-A start to read REG-0 throguh KIQ
2. client-A poll the seqno-0
3. client-B start to read REG-1 through KIQ
4. client-B poll the seqno-1
5. the kiq complete these two read operation
6. client-A to read the register at the wb buffer and
   get REG-1 value

Therefore, use amdgpu_device_wb_get() to request reg_val_offs
for each kiq read register.

v2: fix the error remove
v3: fix the print typo
v4: remove unused variables
Signed-off-by: NYintian Tao <yttao@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In pp_one_vf mode avoid the extra overhead and read/write the
registers without the KIQ.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Acked-by: NYintian Tao <yintian.tao@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Generate HW IP's sched_list in amdgpu_ring_init() instead of
amdgpu_ctx.c. This makes amdgpu_ctx_init_compute_sched(),
ring.has_high_prio and amdgpu_ctx_init_sched() unnecessary.
This patch also stores sched_list for all HW IPs in one big
array in struct amdgpu_device which makes amdgpu_ctx_init_entity()
much more leaner.

v2:
fix a coding style issue
do not use drm hw_ip const to populate amdgpu_ring_type enum

v3:
remove ctx reference and move sched array and num_sched to a struct
use num_scheds to detect uninitialized scheduler list

v4:
use array_index_nospec for user space controlled variables
fix possible checkpatch.pl warnings
Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When we stop the HW for example for GPU reset we should not stop the
front-end scheduler. Otherwise we run into intermediate failures during
command submission.

The scheduler should only be stopped in very few cases:
1. We can't get the hardware working in ring or IB test after a GPU reset.
2. The KIQ scheduler is not used in the front-end and should be disabled during GPU reset.
3. In amdgpu_ring_fini() when the driver unloads.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NNirmoy Das <nirmoy.das@amd.com>
Test-by: NDennis Li <dennis.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We have three ib pools, they are normal, VM, direct pools.

Any jobs which schedule IBs without dependence on gpu scheduler should
use DIRECT pool.

Any jobs schedule direct VM update IBs should use VM pool.

Any other jobs use NORMAL pool.

v2: squash in coding style fix
Signed-off-by: Nxinhui pan <xinhui.pan@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

AMDGPU statically sets priority for compute queues
at initialization so remove all the functions
responsible for changing compute queue priority dynamically.
Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We were changing compute ring priority while rings were being used
before every job submission which is not recommended. This patch
sets compute queue priority at mqd initialization for gfx8, gfx9 and
gfx10.

Policy: make queue 0 of each pipe as high priority compute queue

High/normal priority compute sched lists are generated from set of high/normal
priority compute queues. At context creation, entity of compute queue
get a sched list from high or normal priority depending on ctx->priority
Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1)for gfx IB test we shouldn't insert DE meta data

2)we should make sure IB test finished before we
send event 3 to hypervisor otherwise the IDLE from
event 3 will preempt IB test, which is not designed
as a compatible structure for MCBP
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

SPM_VMID is a global resource, SPM access the video memory according to
SPM_VMID. The initial valude of SPM_VMID is 0 which is used by kernel.
That means UMD can overwrite the memory of VMID0 by enabling SPM, that
is really dangerous.

Initialize SPM_VMID with 0xf, it messes up other user mode process at
most.

v2: squash in indentation fix
Signed-off-by: NJacob He <jacob.he@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The two members will be used by KFD later.
Signed-off-by: NYong Zhao <Yong.Zhao@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move amdgpu_virt_kiq_rreg/amdgpu_virt_kiq_wreg function to amdgpu_gfx.c,
and rename them to amdgpu_kiq_rreg/amdgpu_kiq_wreg.Make it generic and
flexible.
Signed-off-by: Nchen gong <curry.gong@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The mec ucode will set the CP_HQD_ACTIVE bit while the queue is mapped by
MAP_QUEUES packet. So we only need set cp active field for kiq queue.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The same workaround is used for gfx7.
Both PAL and Mesa use it for gfx8 too, so port this commit to
gfx_v8_0_ring_emit_fence_gfx.
Signed-off-by: NPierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The same workaround is used for gfx7.
Both PAL and Mesa use it for gfx8 too, so port this commit to
gfx_v8_0_ring_emit_fence_gfx.
Signed-off-by: NPierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

issue:
kernel would report a warning from a double unpin
during the driver unloading on the CSB bo

why:
we unpin it during hw_fini, and there will be another
unpin in sw_fini on CSB bo.

fix:
actually we don't need to pin/unpin it during
hw_init/fini since it is created with kernel pinned,
we only need to fullfill the CSB again during hw_init
to prevent CSB/VRAM lost after S3

v2:
get_csb in init_rlc so hw_init() will make CSIB content
back even after reset or s3

v3:
use bo_create_kernel instead of bo_create_reserved for CSB
otherwise the bo_free_kernel() on CSB is not aligned and
would lead to its internal reserve pending there forever

take care of gfx7/8 as well
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

issue:
kernel would report a warning from a double unpin
during the driver unloading on the CSB bo

why:
we unpin it during hw_fini, and there will be another
unpin in sw_fini on CSB bo.

fix:
actually we don't need to pin/unpin it during
hw_init/fini since it is created with kernel pinned,
we only need to fullfill the CSB again during hw_init
to prevent CSB/VRAM lost after S3

v2:
get_csb in init_rlc so hw_init() will make CSIB content
back even after reset or s3

v3:
use bo_create_kernel instead of bo_create_reserved for CSB
otherwise the bo_free_kernel() on CSB is not aligned and
would lead to its internal reserve pending there forever

take care of gfx7/8 as well
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c: In function
‘gfx_v8_0_gpu_early_init’:
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c:1713:6: warning: variable
‘mc_shared_chmap’ set but not used [-Wunused-but-set-variable]

Fixes: 0bde3a95 ("drm/amdgpu: split gfx8 gpu init into sw and hw parts")
Signed-off-by: Nyu kuai <yukuai3@huawei.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Without this pin, the csb buffer will be filled with inconsistent
data after S3 resume. And that will causes gfx hang on gfxoff
exit since this csb will be executed then.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Tested-by: NPaul Gover <pmw.gover@yahoo.co.uk>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Reviewed-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Without this pin, the csb buffer will be filled with inconsistent
data after S3 resume. And that will causes gfx hang on gfxoff
exit since this csb will be executed then.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Tested-by: NPaul Gover <pmw.gover@yahoo.co.uk>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Reviewed-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Units in the GDS block default to allowing all VMIDs access to all
entries. Disable shader access to the GDS, GWS, and OA blocks from all
compute and gfx VMIDs by default. For compute, HWS firmware will set
up the access bits for the appropriate VMID when a compute queue
requires access to these blocks.
The driver will handle enabling access on-demand for graphics VMIDs.

Leaving VMID0 with full access because otherwise HWS cannot save or
restore values during task switch.

v2: Fixed code and comment styling.
Signed-off-by: NJoseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The GDS and GWS blocks default to allowing all VMIDs to
access all entries. Graphics VMIDs can handle setting
these limits when the driver launches work. However,
compute workloads under HWS control don't go through the
kernel driver. Instead, HWS firmware should set these
limits when a process is put into a VMID slot.

Disable access to these devices by default by turning off
all mask bits (for OA) and setting BASE=SIZE=0 (for GDS
and GWS) for all compute VMIDs. If a process wants to use
these resources, they can request this from the HWS
firmware (when such capabilities are enabled). HWS will
then handle setting the base and limit for the process when
it is assigned to a VMID.

This will also prevent user kernels from getting 'stuck' in
GWS by accident if they write GWS-using code but HWS
firmware is not set up to handle GWS reset. Until HWS is
enabled to handle GWS properly, all GWS accesses will
MEM_VIOL fault the kernel.

v2: Move initialization outside of SRBM mutex
Signed-off-by: NJoseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The GDS and GWS blocks default to allowing all VMIDs to
access all entries. Graphics VMIDs can handle setting
these limits when the driver launches work. However,
compute workloads under HWS control don't go through the
kernel driver. Instead, HWS firmware should set these
limits when a process is put into a VMID slot.

Disable access to these devices by default by turning off
all mask bits (for OA) and setting BASE=SIZE=0 (for GDS
and GWS) for all compute VMIDs. If a process wants to use
these resources, they can request this from the HWS
firmware (when such capabilities are enabled). HWS will
then handle setting the base and limit for the process when
it is assigned to a VMID.

This will also prevent user kernels from getting 'stuck' in
GWS by accident if they write GWS-using code but HWS
firmware is not set up to handle GWS reset. Until HWS is
enabled to handle GWS properly, all GWS accesses will
MEM_VIOL fault the kernel.

v2: Move initialization outside of SRBM mutex
Signed-off-by: NJoseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add 5 bits to the offset for SRBM selection to handle VMIDs.  Also
update the select_me_pipe_q() callback to also select VMID.
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

kmemdup is introduced to duplicate a region of memory in a neat way.
Rather than kmalloc/kzalloc + memcpy, which the programmer needs to
write the size twice (sometimes lead to mistakes), kmemdup improves
readability, leads to smaller code and also reduce the chances of mistakes.
Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy.
Reviewed-by: NChristian König <Christian.Koenig@amd.com>
Reviewed-by: NEmil Velikov <emil.velikov@collabora.com>
Signed-off-by: NFuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Navi10 has 2 gfx pipe and need to enable gfx eop interrupt
per pipe, instead of enable eop int for all gfx pipes at one
time.
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The function now will create mqd bos for both gfx queue and compute queue
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NJack Xiao <jack.xiao@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Similar to what we do for compute already.
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NJack Xiao <jack.xiao@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

With this commit drm/amd/ has no longer any uses of
the deprecated drmP.h header file.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-11-sam@ravnborg.org

Fix so no files in drm/amd/ depends on the
deprecated drm_os_linux.h header file.

It was done manually:
- remove drm_os_linux.h from drmP.h
- fix all build errros
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-3-sam@ravnborg.org

As far as we know this was never used by userspace and so should be removed.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

This patch fixes the following warning:

drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c: In function ‘gfx_v8_0_tiling_mode_table_init’:
./include/linux/device.h:1487:2: warning: this statement may fall through [-Wimplicit-fallthrough=]
  _dev_warn(dev, dev_fmt(fmt), ##__VA_ARGS__)
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c:3236:3: note: in expansion of macro ‘dev_warn’
   dev_warn(adev->dev,
   ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c:3240:2: note: here
  case CHIP_CARRIZO:
  ^~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The original change caused a regression, so revert it until the new fix
is ready.

BUG: https://bugs.freedesktop.org/show_bug.cgi?id=109650

This reverts commit 764c85fef41722db0f21558c6c2fb38bee172d19.
Signed-off-by: NYong Zhao <Yong.Zhao@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>