- 11 10月, 2007 40 次提交
-
-
由 Satyam Sharma 提交于
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. Introduce a wrapper structure over netpoll to represent logging targets configured in netconsole. This will get extended with other members in further patches. This is done independent of the (to-be-introduced) NETCONSOLE_DYNAMIC config option so that we're able to drastically cut down on the #ifdef complexity of final netconsole.c. Also, struct netconsole_target would be required for multiple targets support also, and not just dynamic reconfigurability. Signed-off-by: NSatyam Sharma <satyam@infradead.org> Signed-off-by: NKeiichi Kii <k-keiichi@bx.jp.nec.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Satyam Sharma 提交于
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. Add some useful general-purpose tips. Also suggest solution for the frequent problem of console loglevel set too low numerically (i.e. for high priority messages only) on the sender. Signed-off-by: NSatyam Sharma <satyam@infradead.org> Acked-by: NKeiichi Kii <k-keiichi@bx.jp.nec.com> Acked-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Satyam Sharma 提交于
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. Avoid unnecessarily disabling interrupts and calling netpoll_send_udp() if the corresponding local interface is not up. Signed-off-by: NSatyam Sharma <satyam@infradead.org> Acked-by: NKeiichi Kii <k-keiichi@bx.jp.nec.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Satyam Sharma 提交于
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. Presently, boot/module parameters are set up quite differently for the case of built-in netconsole (__setup() -> obsolete_checksetup() -> netpoll_parse_options() -> strlen(config) == 0 in init_netconsole()) vs modular netconsole (module_param_string() -> string copied to the config variable -> strlen(config) != 0 init_netconsole() -> netpoll_parse_options()). This patch makes both of them similar by doing exactly the equivalent of a module_param_string() in option_setup() also -- just copying the param string passed from the kernel command line into "config" variable. So, strlen(config) != 0 in both cases, and netpoll_parse_options() is always called from init_netconsole(), thus making the setup logic for both cases similar. Now, option_setup() is only ever called / used for the built-in case, so we put it inside a #ifndef MODULE, otherwise gcc will complain about option_setup() being "defined but not used". Also, the "configured" variable is redundant with this patch and hence removed. Signed-off-by: NSatyam Sharma <satyam@infradead.org> Signed-off-by: NKeiichi Kii <k-keiichi@bx.jp.nec.com> Acked-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Satyam Sharma 提交于
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. The (!np.dev) check in write_msg() is bogus (always false), because: np.dev is set by netpoll_setup(), which is called by init_netconsole() before register_console(), so write_msg() cannot be triggered unless netpoll_setup() successfully set np.dev. Also np.dev cannot go away from under us, because netpoll_setup() grabs us reference on it. So let's remove the bogus check. Signed-off-by: NSatyam Sharma <satyam@infradead.org> Acked-by: NKeiichi Kii <k-keiichi@bx.jp.nec.com> Acked-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Satyam Sharma 提交于
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. (1) Remove unwanted headers. (2) Mark __init and __exit as appropriate. (3) Various trivial codingstyle and prettification stuff. Signed-off-by: NSatyam Sharma <satyam@infradead.org> Signed-off-by: NKeiichi Kii <k-keiichi@bx.jp.nec.com> Acked-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
This patch converts the messy macro for MASK_PFX to inline function and expands TKEY_GET_MASK in the one place it is used. Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Try this out: * replace macro's with inlines * get rid of places doing multiple evaluations of NODE_PARENT [akpm@linux-foundation.org: rcu_dereference wants an lval] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
This stale info came from the original idea, which proved to be unnecessarily complex, sacked_out > 0 is easy to do and that when it's going to be needed anyway (it _can_ be valid also when sacked_out == 0 but there's not going to be a guarantee about it for now). Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Previously code had IsReno/IsFack defined as macros that were local to tcp_input.c though sack_ok field has user elsewhere too for the same purpose. This changes them to static inlines as preferred according the current coding style and unifies the access to sack_ok across multiple files. Magic bitops of sack_ok for FACK and DSACK are also abstracted to functions with appropriate names. Note: - One sack_ok = 1 remains but that's self explanary, i.e., it enables sack - Couple of !IsReno cases are changed to tcp_is_sack - There were no users for IsDSack => I dropped it Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
BUG_ON is an overkill. In fact, I was mislead by BUG_TRAP severity (equals to WARN_ON) which is much lower than BUG_ON's (that panics). Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Previously TCP had a transitional state during which reno counted segments that are already below the current window into sacked_out, which is now prevented. In addition, re-try now the unconditional S+L skb catching. This approach conservatively calls just remove_sack and leaves reset_sack() calls alone. The best solution to the whole problem would be to first calculate the new sacked_out fully (this patch does not move reno_sack_reset calls from original sites and thus does not implement this). However, that would require very invasive change to fastretrans_alert (perhaps even slicing it to two halves). Alternatively, all callers of tcp_packets_in_flight (i.e., users that depend on sacked_out) should be postponed until the new sacked_out has been calculated but it isn't any simpler alternative. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
This happens rather infrequently and is only possible during FRTO. We must not allow TCP to slip to Open state because tcp_fastretrans_alert might then not be called on it's time when FRTO has exited. This become a problem when left_out got removed and was replaced by just sacked_out. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
tcp_verify_left_out is useful for verifying S+L condition, so add it back to couple of places in where the code was not calling to tcp_sync_left_out but used own ad-hoc solution (before the tcp_sync_left_out got removed). Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Left_out was dropped a while ago, thus leaving verifying consistency of the "left out" as only task for the function in question. Thus make it's name more appropriate. In addition, it is intentionally converted to #define instead of static inline because the location of the invariant failure is the most important thing to have if this ever triggers. I think it would have been helpful e.g. in this case where the location of the failure point had to be based on some quesswork: http://lkml.org/lkml/2007/5/2/464 ...Luckily the guesswork seems to have proved to be correct. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
tp->left_out got removed but nothing came to replace it back then (users just did addition by themselves), so add function for users now. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
It is easily calculable when needed and user are not that many after all. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
There is no need for such check in pkts_acked because the callback is not invoked unless at least one segment got fully ACKed (i.e., the snd_una moved past skb's end_seq) by the cumulative ACK's snd_una advancement. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
No other users exist for tcp_ecn.h. Very few things remain in tcp.h, for most TCP ECN functions callers reside within a single .c file and can be placed there. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
In addition, added a reference about the purpose of the loop. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
F-RTO does not touch SACKED_ACKED bits at all, so there is no need to recount them in tcp_enter_frto_loss. After removal of the else branch, nested ifs can be combined. This must also reset sacked_out when SACK is not in use as TCP could have received some duplicate ACKs prior RTO. To achieve that in a sane manner, tcp_reset_reno_sack was re-placed by the previous patch. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Stupid error from my side. Even though now that I noticed this, I hoped it would have been an optimization but no, the counter hint is then incorrect. Thus clearing is necessary for now (I still suspect though that this path is never executed). Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
It is guaranteed to be valid only when !tp->sacked_out. In most cases this seqno is available in the last ACK but there is no guarantee for that. The new fast recovery loss marking algorithm needs this as entry point. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Currently neighbour event notifications are limited to update notifications and only sent if the ARP daemon is enabled. This patch extends the existing notification code by also reporting neighbours being removed due to gc or administratively and removes the dependency on the ARP daemon. This allows to keep track of neighbour states without periodically fetching the complete neighbour table. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Introduces neigh_cleanup_and_release() to be used after a neighbour has been removed from its neighbour table. Serves as preparation to add event notifications. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Gallatin 提交于
Singed off by: Andrew Gallatin <gallatin@myri.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan-Bernd Themann 提交于
Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan-Bernd Themann 提交于
This patch provides generic Large Receive Offload (LRO) functionality for IPv4/TCP traffic. LRO combines received tcp packets to a single larger tcp packet and passes them then to the network stack in order to increase performance (throughput). The interface supports two modes: Drivers can either pass SKBs or fragment lists to the LRO engine. Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Veth stands for Virtual ETHernet. It is a simple tunnel driver that works at the link layer and looks like a pair of ethernet devices interconnected with each other. Mainly it allows to communicate between network namespaces but it can be used as is as well. The newlink callback is organized that way to make it easy to create the peer device in the separate namespace when we have them in kernel. This implementation uses another interface - the RTM_NRELINK message introduced by Patric. Bug fixes from Daniel Lezcano. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelianov 提交于
This routine gets the parsed rtnl attributes and creates a new link with generic info (IFLA_LINKINFO policy). Its intention is to help the drivers, that need to create several links at once (like VETH). This is nothing but a copy-paste-ed part of rtnl_newlink() function that is responsible for creation of new device. Signed-off-by: NPavel Emelianov <xemul@openvz.org> Acked-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
This makes the radiotap parser accept all other fields that are currently defined. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
The wireless extensions ioctl's implemented in mac80211 do not include SIOCGIWTXPOWER. This patch adds the necessary code. Acked-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Thomas Graf 提交于
Makes use of the type safe netlink interface and adds a warning if the message is too big for NLMSG_DEFAULT_SIZE to help debug. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This makes it behave the same whether we have monitor during operation or not. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJiri Benc <jbenc@suse.cz> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Andy Green 提交于
Michael Wu noticed that the skb length checking is not taken care of enough when a packet is presented on the Monitor interface for injection. This patch improves the sanity checking and removes fake offsets placed into the skb network and transport header. Signed-off-by: NAndy Green <andy@warmcat.com> Signed-off-by: NJiri Benc <jbenc@suse.cz> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-