Update GC golden setting for navy_flounder.
Signed-off-by: NJiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's in accordance with pmfw 65.5.0 for navy_flounder.
Signed-off-by: NJiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add support for umc 8.7 initialization

add umc 8.7 source to makefile
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NJohn Clements <john.clements@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It doesn't expose PPTable descriptor on APU platform. So max/min
temperature values cannot be got from APU platform.

v2: Stoney needs to skip crit temperature as well.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Test expects that we also read HPD_IRQ_VECTOR when checking for
symbol loss as well lane status.

[How]
Read bytes 0x200-0x205 instead of just 0x202-0x205
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Acked-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We need to be able to specify slice width for DSC on aconnector

[How]
Getting slice width parameter from debugfs entry, if it is
a valid the value is set in connector's dsc preffered settings
structure. Which then overwrites dsc_cfg structure's parameters
if DSC is decided to be enabled. Works for both SST and MST.
Signed-off-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Reviewed-by: NMikita Lipski <Mikita.Lipski@amd.com>
Acked-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Feature requires synchronization of dig, pipe, and cursor locking
between driver and fw.

[How]
Set flag to force psr to use hw lock mgr.
Signed-off-by: NWyatt Wood <wyatt.wood@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
ramp_up_dispclk_with_dpp is to change dispclk, dppclk and dprefclk
according to bandwidth requirement. call stack: rv1_update_clocks -->
update_clocks --> dcn10_prepare_bandwidth / dcn10_optimize_bandwidth
--> prepare_bandwidth / optimize_bandwidth. before change dcn hw,
prepare_bandwidth will be called first to allow enough clock,
watermark for change, after end of dcn hw change, optimize_bandwidth
is executed to lower clock to save power for new dcn hw settings.

below is sequence of commit_planes_for_stream:
step 1: prepare_bandwidth - raise clock to have enough bandwidth
step 2: lock_doublebuffer_enable
step 3: pipe_control_lock(true) - make dchubp register change will
not take effect right way
step 4: apply_ctx_for_surface - program dchubp
step 5: pipe_control_lock(false) - dchubp register change take effect
step 6: optimize_bandwidth --> dc_post_update_surfaces_to_stream
for full_date, optimize clock to save power

at end of step 1, dcn clocks (dprefclk, dispclk, dppclk) may be
changed for new dchubp configuration. but real dcn hub dchubps are
still running with old configuration until end of step 5. this need
clocks settings at step 1 should not less than that before step 1.
this is checked by two conditions: 1. if (should_set_clock(safe_to_lower
, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz) ||
new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz)
2. request_dpp_div = new_clocks->dispclk_khz > new_clocks->dppclk_khz

the second condition is based on new dchubp configuration. dppclk
for new dchubp may be different from dppclk before step 1.
for example, before step 1, dchubps are as below:
pipe 0: recout=(0,40,1920,980) viewport=(0,0,1920,979)
pipe 1: recout=(0,0,1920,1080) viewport=(0,0,1920,1080)
for dppclk for pipe0 need dppclk = dispclk

new dchubp pipe split configuration:
pipe 0: recout=(0,0,960,1080) viewport=(0,0,960,1080)
pipe 1: recout=(960,0,960,1080) viewport=(960,0,960,1080)
dppclk only needs dppclk = dispclk /2.

dispclk, dppclk are not lock by otg master lock. they take effect
after step 1. during this transition, dispclk are the same, but
dppclk is changed to half of previous clock for old dchubp
configuration between step 1 and step 6. This may cause p-state
warning intermittently.

[How]
for new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz, we
need make sure dppclk are not changed to less between step 1 and 6.
for new_clocks->dispclk_khz > clk_mgr_base->clks.dispclk_khz,
new display clock is raised, but we do not know ratio of
new_clocks->dispclk_khz and clk_mgr_base->clks.dispclk_khz,
new_clocks->dispclk_khz /2 does not guarantee equal or higher than
old dppclk. we could ignore power saving different between
dppclk = displck and dppclk = dispclk / 2 between step 1 and step 6.
as long as safe_to_lower = false, set dpclk = dispclk to simplify
condition check.

CC: Stable <stable@vger.kernel.org>
Signed-off-by: NHersen Wu <hersenxs.wu@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Need a mechanism to force enable DSC on any connector

[How]
Debugfs entry overwrites newly added connector's dsc preffered
settings structure and sets dsc_clock_en flag on it.
During the attomic commit, depending if connector is SST or
MST, we will enable DSC manually by overwriting stream's DSC flag.
Signed-off-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Reviewed-by: NMikita Lipski <Mikita.Lipski@amd.com>
Acked-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Each asic can optimize best based on its capabilities

[How]
Optimizing timing for a new pixel clock
Signed-off-by: NReza Amini <Reza.Amini@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Programming DCN is explicitly forbidden during idle optimzations allowed
state. Existing implemenation relies on OS/DM, which is not robust. Instead
DC should sequence this.

Note that DC will not re-enter idle optimized state on its own, it is only
responsible for catching out of sequence calls. It is still DM
responsibility to sequence appropriate for optimized power, but this change
removes the requirement for DM to cover the .1% case.

[How]
 - elevate updates during idle optimized state to full updates
 - disable idle power optimizations prior to programming
Signed-off-by: NJun Lei <jun.lei@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Setting abm level does not correctly update CRTC state. As a result
no surface update is added to dc stream state and triggers warning.

[How]
Correctly update CRTC state when setting abm level property.

CC: Stable <stable@vger.kernel.org>
Signed-off-by: NStylon Wang <stylon.wang@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Ported from radeon.
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
All DCE6 specific code changes are guarded by CONFIG_DRM_AMD_DC_SI Kconfig option

[How]
(v1) CONFIG_DRM_AMD_DC_SI configuration option is added, default setting is disabled

(v2) Hainan is not supported, description updated accordingly

Tested with HD7750 (Cape Verde) and HD7950 (Tahiti)
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMauro Rossi <issor.oruam@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
amdgpu_device.c requires changes for SI chipsets support
si.c require changes for Display Manager IP block enabling

[How]
amdgpu_device.c: add SI families in amdgpu_device_asic_has_dc_support()
si.c: changes in si_set_ip_blocks() for Display Manager IP blocks enablement

(v1) NOTE: As per Kaveri and older amdgpu.dc=1 kernel cmdline is required

(v2) fix for bc011f9350 ("drm/amdgpu: Change SI/CI gfx/sdma/smu init sequence")
     remove CHIP_HAINAN support since it does not have physical DCE6 module
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMauro Rossi <issor.oruam@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DCE6 chipsets do not support HW rotation

[How]
rotation property is created for Bonaire and later
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMauro Rossi <issor.oruam@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
With all DCE6 specific macros, register, masks in place
dce60_resource.c may use them and become independent from DCE8 headers

[How]
(v1) Changelog:
- use DCE6 headers for registers and masks, remove the DC8 headers
- remove 7th Display Controller/Encoder register instances (DCE6 has only 6)
- use DCE6 specific watermark programming registers (DPG_PIPE_ARBITRATION_CONTROL3)
- use DCE6 specific input pixel processing registers shift/mask
- use DCE6 specific transform registers shift/mask
- use DCE6 specific link encoder registers shift/mask
- use DCE6 specific output pixel processing registers shift/mask
- use DCE6 specific audio registers shift/mask
- use DCE6 specific dmcu registers shift/mask
- use DCE6 specific hwseq registers shift/mask
- use DCE6 specific mem input registers shift/mask

(v2) Changelog:
- use DCE6 ad hoc dce60_mem_input_construct() function
- use DCE6 ad hoc dce60_transform_construct() function

(v3) Changelog:
- use DCE6 ad hoc dce60_ipp_construct() function

(v4) Changelog:
- use DCE6 ad hoc dce60_link_encoder_construct() function

(v5) Changelog:
- use DCE6 ad hoc dce60_opp_construct() function

(v6) Changelog:
- use DCE6 ad hoc dce60_audio_create() function
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMauro Rossi <issor.oruam@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DCE6 has CRTC_PREFETCH_EN bit in CRTC_CONTROL register
DCE6 has no CRTC_LEGACY_REQUESTOR_EN bit in CRTC_START_LINE_CONTROL register
DCE6 has no CRTC_CRC_CNTL register

[How]
Modify dce60_timing_generator_enable_advanced_request() function
Add dce60_configure_crc() function and dce60_is_tg_enabled() kept as static
Use dce60_configure_crc() function in dce60_tg_funcs

v2: remove unused variable (Alex)
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMauro Rossi <issor.oruam@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
kernel WARNING due to use of .cursor_lock = dce_pipe_control_lock inherited by dce110

[How]
DCE6 set .cursor_lock = dce60_pipe_control_lock
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMauro Rossi <issor.oruam@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DCE6 has no bottom_pipe and no Blender HW
DCE6 needs 'blank_target' set to false in order to turn on the display
DCE6 has a specific dce60_pipe_control_lock() fuction that is a no op

[How]
Add DCE6 specific functions with needed private dce60_* dependent fuctions
Comment DCE6 specific CTRC program visibility implementation
Fix a typo in the initial header includes comment 's/DCE8/DCE6/g'
Use dce60_apply_ctx_for_surface() in dce60_hw_sequencer_construct
Use dce60_pipe_control_lock() in dce60_hw_sequencer_construct

v2: add missing return type (Alex)
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMauro Rossi <issor.oruam@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DCE6 has specific SCL_HORZ_FILTER_INIT_{LUMA_RGB,CHROMA} registers
In DCE6 h_init_luma and h_init_chroma initialization is required
Some DCE6 specific SCL_{HORZ,VERT}_FILTER_CONTROL masks were not listed

[How]
Add the registers and masks in dce_transform.h
Add DCE6 specific struct sclh_ratios_inits in dce_transform.h
Add dce60_calculate_inits() function
Add dce60_program_scl_ratios_inits() function
Fix dce60_transform_set_scaler() function

v2: remove unused variable (Alex)
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMauro Rossi <issor.oruam@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DCE6 has no SCL_MODE and no SCL_{HORZ,VERT}_FILTER_INIT registers
DCE6 has no SCL_BOUNDARY_MODE bit in SCL_CONTROL register
DCE6 has Line Buffer programming registers (DC_LB_MEMORY_SPLIT,DC_LB_MEM_SIZE)
DCE6 DATA_FORMAT register has only INTERLEAVE_EN bit
DCE6 has no Out Clamp Control programming registers (OUT_CLAMP_CONTROL_*)

[How]
Add DCE6 specific macros definitions for XFM registers and masks
Add DCE6 specific registers to dce_transform_registers struct
Add DCE6 specific masks to dce_transform_mask struct
DCE6 XFM macros/structs changes will avoid buiding errors when using DCE6 headers
Add dce60_setup_scaling_configuration() w/o missing Scaling registers/bit programming
Add dce60_transform_set_scaler() using DCE6 Line Buffer programming registers
Add dce60_program_bit_depth_reduction() w/o Out Clamp Control programming
Add dce60_transform_set_pixel_storage_depth() use dce60_program_bit_depth_reduction()
Use dce60_transform_set_scaler() in dce60_transform_funcs
Use dce60_transform_set_pixel_storage_depth() in dce60_transform_funcs
Add DCE6 specific dce60_transform_construct
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMauro Rossi <issor.oruam@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DCE6 has no FMT_TRUNCATE_MODE bit in FMT_BIT_DEPTH_CONTROL register
DCE6 has no FMT_CLAMP_COMPONENT_{R,G,B} registers
DCE6 has no FMT_SUBSAMPLING_{MODE,ORDER} bits in FMT_CONTROL register

[How]
Add DCE6 specific macros definitions for OPP registers and masks
DCE6 OPP macros will avoid buiding errors when using DCE6 headers
Add dce60_set_truncation() w/o FMT_TRUNCATE_MODE bit programming
Add dce60_opp_set_clamping() w/o Format Clamp Component programming
Add dce60_opp_program_fmt() w/o Format Subsampling bits programming
Add dce60_opp_program_bit_depth_reduction() with dce60_set_truncation
Use dce60_opp_program_fmt() in dce60_opp_funcs
Use dce60_opp_program_bit_depth_reduction() in dce60_opp_funcs
Add DCE6 specific dce60_opp_construct
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMauro Rossi <issor.oruam@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DCE6 has DPG_PIPE_ARBITRATION_CONTROL3 register for Line Buffer watermark selection
DCE6 has STUTTER_EXIT_SELF_REFRESH_WATERMARK_MASK mask for Stutter watermark selection
DCE6 has NB_PSTATE_CHANGE_WATERMARK_MASK mask for North Bridge watermark selection
DCE6 has no GRPH_MICRO_TILE_MODE mask
DCE6 has no HW_ROTATION register

[How]
Add DCE6 specific macros definitions for MI registers and masks
Add DCE6 specific registers to dce_mem_input_registers struct
Add DCE6 specific masks to dce_mem_input_masks struct
DCE6 MI macros/structs changes will avoid buiding errors when using DCE6 headers
Add dce60_program_urgency_watermark() function
Add dce60_program_nbp_watermark() function
Add dce60_program_stutter_watermark() function
Add dce60_mi_program_display_marks() function w/ new DCE6 watermark programming
Add DCE6 specific tiling programming and modify DCE8 case
Add dce60_program_size() fuction w/o Rotation processing
Add dce60_mi_program_surface_config() fuction
Use dce60_mi_program_display_marks() in dce60_mi_funcs
Use dce60_mi_program_surface_config() in dce60_mi_funcs
Add DCE6 specific dce60_mem_input_construct

v2: remove unused variable (Alex)
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMauro Rossi <issor.oruam@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DCE6 has no DP_DPHY_SCRAM_CNTL register

[How]
Add DCE6 specific macros definitions for LE registers
DCE6 LE macros will avoid buiding errors when using DCE6 headers
Add dce60_set_dp_phy_pattern_hbr2_compliance_cp2520_2() w/o Scramble Control programming
Add dce60_set_dp_phy_pattern_passthrough_mode() w/o Scramble Control programming
Add dce60_configure_encoder() w/o Scramble Control programming
Add dce60_link_encoder_enable_dp_output() w/ dce60_configure_encoder
Add dce60_link_encoder_enable_dp_mst_output() w/ dce60_configure_encoder
Add dce60_link_encoder_dp_set_phy_pattern() w/ dce60_set_dp_phy_pattern_passthrough_mode
Use dce60_link_encoder_enable_dp_output() in dce60_lnk_enc_funcs
Use dce60_link_encoder_enable_dp_mst_output() in dce60_lnk_enc_funcs
Use dce60_link_encoder_dp_set_phy_pattern() in dce60_lnk_enc_funcs
Add DCE6 specific dce60_link_encoder_construct
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMauro Rossi <issor.oruam@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DCE6 does not have CURSOR2_DEGAMMA_MODE bit in DEGAMMA_CONTROL register

[How]
Add DCE6 specific macros definitions for IPP masks
DCE6 IPP macros will avoid buiding errors when using DCE6 headers
Add dce60_ipp_set_degamma() function w/o Cursor2 Degamma programming
Use dce60_ipp_set_degamma() in ipp_funcs dce60_ipp_funcs
Add DCE6 specific dce60_ipp_construct
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMauro Rossi <issor.oruam@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DCE6 has no BLND_CONTROL register for Blender HW programming
DCE6 has no BLND_V_UPDATE_LOCK register for Pipe Locking

[How]
Add DCE6 specific macros definitions for HWSEQ registers and masks
DCE6 HWSEQ macros will avoid buiding errors when using DCE6 headers
Add dce60_pipe_control_lock() stub with no op
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMauro Rossi <issor.oruam@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DCE6 has no SMU_INTERRUPT_CONTROL register, but it's used for DCN10 and later

[How]
Add DCE6 specific macros definitions for DMCU registers and masks
DCE6 DMCU macros will avoid buiding errors when using DCE6 headers
There is no other change needed in dce_dcmu
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMauro Rossi <issor.oruam@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DCE6 has no DCCG_AUDIO_DTO2_USE_512FBR_DTO mask in DCCG_AUDIO_DTO_SOURCE register

[How]
Add DCE6 specific macros definitions for AUD masks
DCE6 AUD macros will avoid buiding errors when using DCE6 headers
Add dce60_aud_wall_dto_setup() w/o 512*Fs programming
Use dce60_aud_wall_dto_setup() in dce60_funcs
Add DCE specific dce60_audio_create
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMauro Rossi <issor.oruam@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Issue in the Mouse cursor size in Linux Desktop Environments

[How]
In DCE6 dc->caps.max_cursor_size need to be set as 64 instead of 128
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMauro Rossi <issor.oruam@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

(v1) Changelog

[Why]
After commit c69dd2d0 "drm/amd/display: Refactor clk_mgr functions"
dc/clk_mgr requires these changes to add SI parts support
Necessary to avoid hitting default: ASSERT(0); /* Unknown Asic */
that would cause kernel freeze

[How]
Add case statement for FAMILY_SI chipsets

(v2) Changelog

[Why]
DCE6 has no DPREFCLK_CNTL register

[How]
Add DCE6 specific macros definitions for CLK registers and masks
Add DCE6 specific dce60/dce60_clk_mgr.c for DCE6 customization
Code style: reuse all the public functions in dce100/dce_clk_mgr.h header
Code style: use dce60_* static functions as per other DCE implementations
Add dce60_get_dp_ref_freq_khz() w/o using DPREFCLK_CNTL register
Use dce60_get_dp_ref_freq_khz() function in dce60_funcs
Add DCE6 specific dce60_clk_mgr_construct
dc/clk_mgr/dce_clk_mgr.c: use dce60_clk_mgr_construct for FAMILY_SI chipsets
Add Makefile rules for dce60_clk_mgr.o target conditional to CONFIG_DRM_AMD_DC_SI
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMauro Rossi <issor.oruam@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
amdgpu_dm.c requires changes for SI chipsets init and irq handlers registration

[How]
SI support: load_dmcu_fw(), amdgpu_dm_initialize_drm_device(), dm_early_init()
Add DCE6 specific dce60_register_irq_handlers() function

(v1) NOTE: As per Kaveri and older amdgpu.dc=1 kernel cmdline is required

(v2) fix for bc011f9 ("drm/amdgpu: Change SI/CI gfx/sdma/smu init sequence")
     remove CHIP_HAINAN support since it does not have physical DCE6 module

(v3) fix vblank irq support for DCE6 using ad hoc dce60_register_irq_handlers()
     replicating for vblank irq the behavior of dce110_register_irq_handlers()
     as per commit b57de80a ("drm/amd/display: Register on VLBLANK ISR.")

(v4) updated due to following kernel 5.2 commit:
     b2fddb13 ("drm/amd/display: Drop underlay plane support")
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMauro Rossi <issor.oruam@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
irq service requires changes for DCE6 support

[How]
(v1) DCE6 targets are added replicating existing DCE8 implementation.
     due to missing CRTC_VERTICAL_INTERRUPT0_CONTROL registers/masks,
     dce/dce_8_0_{d,sh_mask}.h used instead of dce/dce_6_0_{d,sh_mask}.h

(v2) DCE6 headers used adding the necessary vblank irq registers
     (INT_MASK and VBLANK_STATUS) and vblank irq masks as implemented
     in amdgpu driver.
     Add vblank_irq_info_funcs_dce60 with .set and .ack as per commit
     b10d51f8 ("drm/amd/display: Add interrupt entries for VBLANK isr.")
     and use it in vblank_int_entry(reg_num) macro definition

(v3) updated due to following kernel 5.3 commit:
     4fc4dca8 ("drm/amd: drop use of drmp.h in os_types.h")

(v4) updated due to following kernel 5.6 commit:
     d9e32672 ("drm/amd/display: cleanup of construct and destruct funcs")
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMauro Rossi <issor.oruam@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
hw_factory.c requires changes for DCE6 support

[How]
DCE6 targets added replicating and adapting existing DCE8 implementation.

(v2) changes due to following commit:
    91db9311 ("drm/amd/display: refactor gpio to allocate hw_container in constructor")
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMauro Rossi <issor.oruam@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
command_table_helper.c requires changes for DCE6 support

[How]
DCE6 targets added replicating and adapting the existing DCE8 implementation.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMauro Rossi <issor.oruam@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
resource_parse_asic_id() and dc_create_resource_pool() are missing SI/DCE6 cases

[How]
SI/DCE6 cases support added using existing DCE8 implementation as a reference

(v2) updated due to following kernel 5.2 commit:
     d9673c92 ("drm/amd/display: Pass init_data into DCN resource creation")
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMauro Rossi <issor.oruam@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DCE6 chipsets have a lot in common with DCE8, let's start from this

[How]
DCE6 targets are added replicating existing DCE8 implementation.

NOTE: dce_8_0_{d,sh_mask}.h headers used instead of dce_6_0_{d,sh_mask}.h
initial build prototype due to missing DCE6 macros/registers/masks
DCE6 specific macros/registers/masks will be added with later commits

(v2b) removed dce_version cases in dc/dce/dce_clock_source.c and
     updated dce60 due to following kernel 5.0 commits:
     24f7dd7e ("drm/amd/display: move pplib/smu notification to dccg block")
     9566b675 ("drm/amd/display: remove safe_to_lower flag from dc, use 2 functions instead")
     4244381c ("drm/amd/display: clean up base dccg struct")
     4c5e8b54 ("drm/amd/display: split dccg clock manager into asic folders")
     84e7fc05 ("drm/amd/display: rename dccg to clk_mgr")
     77f6916a ("drm/amd/display: Remove duplicate header")
     9f7ddbea ("drm/amd/display: fix optimize_bandwidth func pointer for dce80")
     4ece61a2 ("drm/amd/display: set clocks to 0 on suspend on dce80")

(v3b) updated dce60 due to following kernel 5.1 commits:
     380604e2 ("drm/amd/display: Use 100 Hz precision for pipe pixel clocks")
     32e61361 ("drm/amd/display: Fix 64-bit division for 32-bit builds")
     1877ccf6 ("drm/amd/display: Change from aux_engine to dce_aux")
     c69dffab ("drm/amd/display: fix eDP fast bootup for pre-raven asic")

(v4b) updated dce60 due to following kernel 5.2 commits:
     e5c41970 ("drm/amd/display: Add plane capabilities to dc_caps")
     813d20dc ("drm/amd/display: Fix multi-thread writing to 1 state")
     ea36ad34 ("drm/amd/display: expand plane caps to include fp16 and scaling capability")
     afcd526b ("drm/amd/display: Add fast_validate parameter")

(v5b) updated dce60 due to following kernel 5.3 commits:
     e7e10c46 ("drm/amd/display: stop external access to internal optc sync params")
     78cc70b1 ("drm/amd/display: Engine-specific encoder allocation")
     dc88b4a6 ("drm/amd/display: make clk mgr soc specific")
     4fc4dca8 ("drm/amd: drop use of drmp.h in os_types.h")

(v6b) updated dce60 due to following kernel 5.4 commits:
     54a9bcb0 ("drm/amd/display: Fix a typo - dce_aduio_mask --> dce_audio_mask")
     9adc8050 ("drm/amd/display: make firmware info only load once during dc_bios create")

(v7b) updated dce60 due to following kernel 5.5 commits:
     cabe144b ("drm/amd/display: memory leak")
     8276dd87 ("drm/amd/display: update register field access mechanism")
     f6040a43 ("drm/amd/display: configurable aux timeout support")
     bf7f5ac3 ("drm/amd/display: map TRANSMITTER_UNIPHY_x to LINK_REGS_x")

(v8b) updated dce60 due to following kernel 5.6 commits:
     d9e32672 ("drm/amd/display: cleanup of construct and destruct funcs")
     f42ea55b ("drm/amd/display: add separate of private hwss functions")

(v9b) updated dce60 due to following kernel 5.8 commits:
     bba8289b ("drm/amd/display: code clean up in dce80_hw_sequencer.c")
     904fb6e0 ("drm/amd/display: move panel power seq to new panel struct")
     d4caa72e ("drm/amd/display: change from panel to panel cntl")

(v10) Fix up PLL handling for DCE6:
     DCE6.0 supports 2 PLLs.  DCE6.1 supports 3 PLLs. (Alex)
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMauro Rossi <issor.oruam@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Asic info for SI parts need to be preliminarly added

[How]
Asics info retrieved from si_id.h in https://github.com/GPUOpen-Tools/CodeXL

Tree path:
./CodeXL/Components/ShaderAnalyzer/AMDTBackEnd/Include/Common/asic_reg/si_id.h
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMauro Rossi <issor.oruam@gmail.com>