These two have only slight differences:
 - whether 'addr' is of type u64 or of type gva_t
 - whether they have 'direct' parameter or not

Concerning the former, quickly_check_mmio_pf()'s u64 is better because
'addr' needs to be able to have both a guest physical address and a
guest virtual address.

The latter is just a stylistic issue as we can always calculate the mode
from the 'vcpu' as is_mmio_page_fault() does.  This patch keeps the
parameter to make the following patch cleaner.

In addition, the patch renames the function to mmio_info_in_cache() to
make it clear what it actually checks for.
Signed-off-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Prepare for improving the precision in the next patch.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The patch implements KVM_EXIT_HYPERV userspace exit
functionality for Hyper-V VMBus hypercalls:
HV_X64_HCALL_POST_MESSAGE, HV_X64_HCALL_SIGNAL_EVENT.

Changes v3:
* use vcpu->arch.complete_userspace_io to setup hypercall
result

Changes v2:
* use KVM_EXIT_HYPERV for hypercalls
Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com>
CC: Gleb Natapov <gleb@kernel.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Joerg Roedel <joro@8bytes.org>
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: qemu-devel@nongnu.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Currently we do not support Hyper-V hypercall continuation
so reject it.
Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com>
CC: Gleb Natapov <gleb@kernel.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Joerg Roedel <joro@8bytes.org>
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: qemu-devel@nongnu.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Pass the return code from kvm_emulate_hypercall on to the caller,
in order to allow it to indicate to the userspace that
the hypercall has to be handled there.

Also adjust all the existing code paths to return 1 to make sure the
hypercall isn't passed to the userspace without setting kvm_run
appropriately.
Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com>
CC: Gleb Natapov <gleb@kernel.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Joerg Roedel <joro@8bytes.org>
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: qemu-devel@nongnu.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

VMBus hypercall codes inside Hyper-V UAPI header will
be used by QEMU to implement VMBus host devices support.
Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com>
Acked-by: NK. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com>
CC: Gleb Natapov <gleb@kernel.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Joerg Roedel <joro@8bytes.org>
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: qemu-devel@nongnu.org
[Do not rename the constant at the same time as moving it, as that
 would cause semantic conflicts with the Hyper-V tree. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Rename HV_X64_HV_NOTIFY_LONG_SPIN_WAIT by HVCALL_NOTIFY_LONG_SPIN_WAIT,
so the name is more consistent with the other hypercalls.
Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com>
CC: Gleb Natapov <gleb@kernel.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Joerg Roedel <joro@8bytes.org>
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: qemu-devel@nongnu.org
[Change name, Andrey used HV_X64_HCALL_NOTIFY_LONG_SPIN_WAIT. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Sometimes when setting a breakpoint a process doesn't stop on it.
This is because the debug registers are not loaded correctly on
VCPU load.

The following simple reproducer from Oleg Nesterov tries using debug
registers in both the host and the guest, for example by running "./bp
0 1" on the host and "./bp 14 15" under QEMU.

    #include <unistd.h>
    #include <signal.h>
    #include <stdlib.h>
    #include <stdio.h>
    #include <sys/wait.h>
    #include <sys/ptrace.h>
    #include <sys/user.h>
    #include <asm/debugreg.h>
    #include <assert.h>

    #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)

    unsigned long encode_dr7(int drnum, int enable, unsigned int type, unsigned int len)
    {
        unsigned long dr7;

        dr7 = ((len | type) & 0xf)
            << (DR_CONTROL_SHIFT + drnum * DR_CONTROL_SIZE);
        if (enable)
            dr7 |= (DR_GLOBAL_ENABLE << (drnum * DR_ENABLE_SIZE));

        return dr7;
    }

    int write_dr(int pid, int dr, unsigned long val)
    {
        return ptrace(PTRACE_POKEUSER, pid,
                offsetof (struct user, u_debugreg[dr]),
                val);
    }

    void set_bp(pid_t pid, void *addr)
    {
        unsigned long dr7;
        assert(write_dr(pid, 0, (long)addr) == 0);
        dr7 = encode_dr7(0, 1, DR_RW_EXECUTE, DR_LEN_1);
        assert(write_dr(pid, 7, dr7) == 0);
    }

    void *get_rip(int pid)
    {
        return (void*)ptrace(PTRACE_PEEKUSER, pid,
                offsetof(struct user, regs.rip), 0);
    }

    void test(int nr)
    {
        void *bp_addr = &&label + nr, *bp_hit;
        int pid;

        printf("test bp %d\n", nr);
        assert(nr < 16); // see 16 asm nops below

        pid = fork();
        if (!pid) {
            assert(ptrace(PTRACE_TRACEME, 0,0,0) == 0);
            kill(getpid(), SIGSTOP);
            for (;;) {
                label: asm (
                    "nop; nop; nop; nop;"
                    "nop; nop; nop; nop;"
                    "nop; nop; nop; nop;"
                    "nop; nop; nop; nop;"
                );
            }
        }

        assert(pid == wait(NULL));
        set_bp(pid, bp_addr);

        for (;;) {
            assert(ptrace(PTRACE_CONT, pid, 0, 0) == 0);
            assert(pid == wait(NULL));

            bp_hit = get_rip(pid);
            if (bp_hit != bp_addr)
                fprintf(stderr, "ERR!! hit wrong bp %ld != %d\n",
                    bp_hit - &&label, nr);
        }
    }

    int main(int argc, const char *argv[])
    {
        while (--argc) {
            int nr = atoi(*++argv);
            if (!fork())
                test(nr);
        }

        while (wait(NULL) > 0)
            ;
        return 0;
    }

Cc: stable@vger.kernel.org
Suggested-by: NNadadv Amit <namit@cs.technion.ac.il>
Reported-by: NAndrey Wagin <avagin@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Smatch noticed a NULL dereference in kvm_intr_is_single_vcpu_fast that
happens if VM already warned about invalid lowest-priority interrupt.

Create a function for common code while fixing it.

Fixes: 6228a0da ("KVM: x86: Add lowest-priority support for vt-d posted-interrupts")
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This is the same as before:

    kvm_scale_tsc(tgt_tsc_khz)
        = tgt_tsc_khz * ratio
        = tgt_tsc_khz * user_tsc_khz / tsc_khz   (see set_tsc_khz)
        = user_tsc_khz                           (see kvm_guest_time_update)
        = vcpu->arch.virtual_tsc_khz             (see kvm_set_tsc_khz)

However, computing it through kvm_scale_tsc will make it possible
to include the NTP correction in tgt_tsc_khz.
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This refers to the desired (scaled) frequency, which is called
user_tsc_khz in the rest of the file.
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When we take a #DB or #BP vmexit while in guest mode, we first of all
need to check if there is ongoing guest debugging that might be
interested in the event. Currently, we unconditionally leave L2 and
inject the event into L1 if it is intercepting the exceptions. That
breaks things marvelously.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

There is quite some common code in all these is_<exception>() helpers.
Factor it out before adding even more of them.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Right now halt_poll_ns can be change during runtime. The
grow and shrink factors can only be set during module load.
Lets fix several aspects of grow shrink:
- make grow/shrink changeable by root
- make all variables unsigned int
- read the variables once to prevent races
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvm-s390-next-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: Fixes and features for kvm/next (4.6)

1. also provide the floating point registers via sync regs
2. Separate out intruction vs. data accesses
3. Fix program interrupts in some cases
4. Documentation fixes
5. dirty log improvements for huge guests

A KVM_GET_DIRTY_LOG ioctl might take a long time.
This can result in fatal signals seemingly being ignored.
Lets bail out during the dirty bit sync, if a fatal signal
is pending.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

When doing dirty logging on huge guests (e.g.600GB) we sometimes
get rcu stall timeouts with backtraces like

[ 2753.194083] ([<0000000000112fb2>] show_trace+0x12a/0x130)
[ 2753.194092]  [<0000000000113024>] show_stack+0x6c/0xe8
[ 2753.194094]  [<00000000001ee6a8>] rcu_pending+0x358/0xa48
[ 2753.194099]  [<00000000001f20cc>] rcu_check_callbacks+0x84/0x168
[ 2753.194102]  [<0000000000167654>] update_process_times+0x54/0x80
[ 2753.194107]  [<00000000001bdb5c>] tick_sched_handle.isra.16+0x4c/0x60
[ 2753.194113]  [<00000000001bdbd8>] tick_sched_timer+0x68/0x90
[ 2753.194115]  [<0000000000182a88>] __run_hrtimer+0x88/0x1f8
[ 2753.194119]  [<00000000001838ba>] hrtimer_interrupt+0x122/0x2b0
[ 2753.194121]  [<000000000010d034>] do_extint+0x16c/0x170
[ 2753.194123]  [<00000000005e206e>] ext_skip+0x38/0x3e
[ 2753.194129]  [<000000000012157c>] gmap_test_and_clear_dirty+0xcc/0x118
[ 2753.194134] ([<00000000001214ea>] gmap_test_and_clear_dirty+0x3a/0x118)
[ 2753.194137]  [<0000000000132da4>] kvm_vm_ioctl_get_dirty_log+0xd4/0x1b0
[ 2753.194143]  [<000000000012ac12>] kvm_vm_ioctl+0x21a/0x548
[ 2753.194146]  [<00000000002b57f6>] do_vfs_ioctl+0x30e/0x518
[ 2753.194149]  [<00000000002b5a9c>] SyS_ioctl+0x9c/0xb0
[ 2753.194151]  [<00000000005e1ae6>] sysc_tracego+0x14/0x1a
[ 2753.194153]  [<000003ffb75f3972>] 0x3ffb75f3972

We should do a cond_resched in here.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Dirty log query can take a long time for huge guests.
Holding the mmap_sem for very long times  can cause some unwanted
latencies.
Turns out that we do not need to hold the mmap semaphore.
We hold the slots_lock for gfn->hva translation and walk the page
tables with that address, so no need to look at the VMAs. KVM also
holds a reference to the mm, which should prevent other things
going away. During the walk we take the necessary ptl locks.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The interface for adapter mappings was designed with code in mind
that maps each address only once; let's document this.

Otherwise, duplicate mappings are added to the list, which makes
the code ineffective and uses up the limited amount of mapping
needlessly.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Let's properly document KVM_S390_VM_CRYPTO and its attributes.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Let's properly document KVM_S390_VM_TOD and its attributes.
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Since commit 9977e886 ("s390/kernel: lazy restore fpu registers"),
vregs in struct sie_page is unsed. We can safely remove the field and
the definition.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

On instruction-fetch exceptions, we have to forward the PSW by any
valid ilc and correctly use that ilc when injecting the irq. Injection
will already take care of rewinding the PSW if we injected a nullifying
program irq, so we don't need special handling prior to injection.

Until now, autodetection would have guessed an ilc of 0.
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

On SIE faults, the ilc cannot be detected automatically, as the icptcode
is 0. The ilc indicated in the program irq will always be 0. Therefore we
have to manually specify the ilc in order to tell the guest which ilen was
used when forwarding the PSW.
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Program irq injection during program irq intercepts is the last candidates
that injects nullifying irqs and relies on delivery to do the right thing.

As we should not rely on the icptcode during any delivery (because that
value will not be migrated), let's add a flag, telling prog IRQ delivery
to not rewind the PSW in case of nullifying prog IRQs.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

__extract_prog_irq() is used only once for getting the program check data
in one place. Let's combine it with an injection function to avoid a memset
and to prevent misuse on injection by simplifying the interface to only
have the VCPU as parameter.
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Let's use our fresh new function read_guest_instr() to access
guest storage via the correct addressing schema.
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

When an instruction is to be fetched, special handling applies to
secondary-space mode and access-register mode. The instruction is to be
fetched from primary space.

We can easily support this by selecting the right asce for translation.
Access registers will never be used during translation, so don't
include them in the interface. As we only want to read from the current
PSW address for now, let's also hide that detail.
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

We will need special handling when fetching instructions, so let's
introduce new guest access modes GACC_FETCH and GACC_STORE instead
of a write flag. An additional patch will then introduce GACC_IFETCH.
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

We have to migrate the program irq ilc and someday we will have to
specify the ilc without KVM trying to autodetect the value.

Let's reuse one of the spare fields in our program irq that should
always be set to 0 by user space. Because we also want to make use
of 0 ilcs ("not available"), we need a validity indicator.

If no valid ilc is given, we try to autodetect the ilc via the current
icptcode and icptstatus + parameter and store the valid ilc in the
irq structure.

This has a nice effect: QEMU's making use of KVM_S390_IRQ /
KVM_S390_SET_IRQ_STATE / KVM_S390_GET_IRQ_STATE for migration will
directly migrate the ilc without any changes.

Please note that we use bit 0 as validity and bit 1,2 for the ilc, so
by applying the ilc mask we directly get the ilen which is usually what
we work with.
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

We have some confusion about ilc vs. ilen in our current code. So let's
correctly use the term ilen when dealing with (ilc << 1).

Program irq injection didn't take care of the correct ilc in case of
irqs triggered by EXECUTE functions, let's provide one function
kvm_s390_get_ilen() to take care of all that.

Also, manually specifying in intercept handlers the size of the
instruction (and sometimes overwriting that value for EXECUTE internally)
doesn't make too much sense. So also provide the functions:
- kvm_s390_retry_instr to retry the currently intercepted instruction
- kvm_s390_rewind_psw to rewind the PSW without internal overwrites
- kvm_s390_forward_psw to forward the PSW
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

As we already store the floating point registers in the vector save area
in floating point register format when we don't have MACHINE_HAS_VX, we can
directly expose them to user space using a new sync flag.

The floating point registers will be valid when KVM_SYNC_FPRS is set. The
fpc will also be valid when KVM_SYNC_FPRS is set.

Either KVM_SYNC_FPRS or KVM_SYNC_VRS will be enabled, never both.

Let's also change two positions where we access vrs, making the code easier
to read and one comment superfluous.
Suggested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

If we have MACHINE_HAS_VX, the floating point registers are stored
in the vector register format, event if the guest isn't enabled for vector
registers. So we can allow KVM_SYNC_VRS as soon as MACHINE_HAS_VX is
available.

This can in return be used by user space to support floating point
registers via struct kvm_run when the machine has vector registers.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Different pieces of code checked for vcpu->arch.apic being (non-)NULL,
or used kvm_vcpu_has_lapic (more optimized) or lapic_in_kernel.
Replace everything with lapic_in_kernel's name and kvm_vcpu_has_lapic's
implementation.
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Do for kvm_cpu_has_pending_timer and kvm_inject_pending_timer_irqs
what the other irq.c routines have been doing.
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Usually the in-kernel APIC's existence is checked in the caller.  Do not
bother checking it again in lapic.c.
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add host irq information in trace event, so we can better understand
which irq is in posted mode.
Signed-off-by: NFeng Wu <feng.wu@intel.com>
Reviewed-by: NRadim Krcmar <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Use vector-hashing to deliver lowest-priority interrupts for
VT-d posted-interrupts. This patch extends kvm_intr_is_single_vcpu()
to support lowest-priority handling.
Signed-off-by: NFeng Wu <feng.wu@intel.com>
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Use vector-hashing to deliver lowest-priority interrupts, As an
example, modern Intel CPUs in server platform use this method to
handle lowest-priority interrupts.
Signed-off-by: NFeng Wu <feng.wu@intel.com>
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When the interrupt is not single destination any more, we need
to change back IRTE to remapped mode explicitly.
Signed-off-by: NFeng Wu <feng.wu@intel.com>
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>