- 09 5月, 2007 4 次提交
-
-
由 Stephen Cameron 提交于
Make cciss unconditionally include scsi/scsi.h, because of the use of SCSI_IOCTL_GET_IDLUN and SCSI_IOCTL_GET_BUS_NUMBER. Signed-off-by: NStephen M. Cameron <steve.cameron@hp.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Miller (OS Dev) 提交于
Set rq->errors more correctly in cciss driver. Previously we had set it synonymously with the meaning of the last parameter of end_that_last_request and complete_buffers (the "uptodate" parameter) and had gotten away with it for all this time because nobody ever looked at rq->errors. SCSI_IOCTL_SEND_COMMAND looks at rq->errors, so now it matters that it be right. Signed-off-by: NStephen M. Cameron <steve.cameron@hp.com> Signed-off-by: NMike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Miller (OS Dev) 提交于
For all of you that think cciss should be a scsi driver here is the patch that you have been waiting for all these years. This patch actually adds the SG_IO ioctl to cciss. The primary purpose is for clustering and high-availibilty. But now anyone can exploit this ioctl in any manner they wish. Note, SCSI_IOCTL_SEND_COMMAND doesn't work with this patch due to rq->errors being set incorrectly. Subsequent patch fixes that. Signed-off-by: NStephen M. Cameron <steve.cameron@hp.com> Signed-off-by: NMike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Miller (OS Dev) 提交于
Reformat some error handling code to reduce line lengths a bit. Signed-off-by: NStephen M. Cameron <steve.cameron@hp.com> Signed-off-by: NMike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 4月, 2007 1 次提交
-
-
由 Bjorn Helgaas 提交于
We must unregister from SCSI before we unmap device resources and unhook the IRQ handler. Otherwise, SCSI may send us more requests, and we won't be able to handle them. I see the following oops during every reboot of my HP DL360: ... Unmounting local filesystems...done. Rebooting... Completed flushing cache on controller 0 BUG: unable to handle kernel paging request at virtual address f8808040 printing eip: c02dc72b *pde = 02120067 *pte = 00000000 Oops: 0002 [#1] SMP Modules linked in: CPU: 1 EIP: 0060:[<c02dc72b>] Not tainted VLI EFLAGS: 00010046 (2.6.21-rc6 #1) EIP is at SA5_submit_command+0xb/0x20 eax: f8808000 ebx: f7a00000 ecx: f79f0000 edx: 37a00000 esi: f79f0000 edi: 00000000 ebp: 00000000 esp: dd717a44 ds: 007b es: 007b fs: 00d8 gs: 0000 ss: 0068 Process khelper (pid: 1427, ti=dd716000 task=c2260a70 task.ti=dd716000) Stack: c02df2c0 f7a00000 f7a00000 00d41008 c02df691 00000000 00000010 00000002 00000001 f79f0000 f7fff844 c1398420 00000000 00000000 00001000 230a3020 69666564 5420656e 50434f49 465f544b 4853554c 44414552 0a312009 66656423 Call Trace: [<c02df2c0>] start_io+0x80/0x120 [<c02df691>] do_cciss_request+0x331/0x350 [<c014242a>] mempool_alloc+0x2a/0xe0 [<c020ad71>] blk_alloc_request+0x61/0x80 [<c020b02e>] get_request+0x15e/0x1e0 [<c01595e0>] cache_alloc_refill+0xb0/0x1e0 [<c021049d>] as_update_rq+0x2d/0x80 [<c0210d28>] as_add_request+0x68/0x90 [<c0207f99>] elv_insert+0x119/0x160 [<c020bd0b>] __make_request+0xcb/0x320 [<c0122ee0>] lock_timer_base+0x20/0x50 [<c0123096>] del_timer+0x56/0x60 [<c020a7b8>] blk_remove_plug+0x38/0x70 [<c020a815>] __generic_unplug_device+0x25/0x30 [<c020a835>] generic_unplug_device+0x15/0x30 ... Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: NMike Miller <mike.miller@hp.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 4月, 2007 1 次提交
-
-
由 Mike Miller (OS Dev) 提交于
This patch adds initialization of drv->cylinders back into the failing case in cciss_geometry_inquiry. I inadvertently removed it in one my 2TB updates. Signed-off-by: NMike Miller <mike.miller@hp.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 3月, 2007 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 3月, 2007 2 次提交
-
-
由 Mike Miller (OS Dev) 提交于
This patch adds support for the struct pci_driver shutdown method to cciss. We require notification of an impending reboot or shutdown so that we can flush the battery backed write cache (BBWC) on the Smart Array controller. Signed-off-by: NMike Miller <mike.miller@hp.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Miller (OS Dev) 提交于
This patch changes the way we determine if a logical volume is larger than 2TB. The original test looked for a total_size of 0. Originally we added 1 to the total_size. That would make our read_capacity return size 0 for >2TB lv's. We assumed that we could not have a lv size of 0 so it seemed OK until we were in a clustered system. The backup node would see a size of 0 due to the reservation on the drive. That caused the driver to switch to 16-byte CDB's which are not supported on older controllers. After that everything was broken. It may seem petty but I don't see the value in trying to determine if the LBA is beyond the 2TB boundary. That's why when we switch we use 16-byte CDB's for all read/write operations. Please consider this for inclusion. Signed-off-by: NMike Miller <mike.miller@hp.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 31 12月, 2006 1 次提交
-
-
由 Randy Dunlap 提交于
RAID_UNKNOWN is used even when PROC_FS=n, so move it outside of the CONFIG_PROC_FS block. drivers/block/cciss.c:1910: error: 'RAID_UNKNOWN' undeclared (first use in this function) Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: <mike.miller@hp.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 18 12月, 2006 2 次提交
-
-
由 Mike Miller 提交于
This patch fixes a stupid bug. Sometime during the 2tb enhancement I ended up replacing the macros XFER_READ and XFER_WRITE with h->cciss_read and h->cciss_write respectively. It seemed to work somehow at least on x86_64 and ia64. I don't know how. But people started complaining about command timeouts on older controllers like the 64xx series and only on ia32. This resolves the issue reproduced in our lab. Please consider this for inclusion. Thanks, mikem Signed-off-by: NMike Miller <mike.miller@hp.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Mike Miller 提交于
This patch sets a default raid level on a volume that either does not support reading the geometry or reports an invalid geometry for whatever reason. We were always setting some values for heads and sectors but never set a raid level. This caused lots of problems on some buggy firmware. Please consider this for inclusion. Thanks, mikem Signed-off-by: NMike Miller <mike.miller@hp.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 14 12月, 2006 3 次提交
-
-
由 Robert P. J. Day 提交于
Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Ian Kent <raven@themaw.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mike Miller 提交于
Remove calls to pci_disable_device except in fail_all_cmds. The pci_disable_device function does something nasty to Smart Array controllers that pci_enable_device does not undo. So if the driver is unloaded it cannot be reloaded. Also, customers can disable any pci device via the ROM Based Setup Utility (RBSU). If the customer has disabled the controller we should not try to blindly enable the card from the driver. Please consider this for inclusion. Signed-off-by: NMike Miller <mike.miller@hp.com> Acked-by: NAlan Cox <alan@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mike Miller 提交于
Map out more memory for our config table. It's required to reach offset 0x214 to disable DMA on the P600. I'm not sure how I lost this hunk. Please consider this for inclusion. Signed-off-by: NMike Miller <mike.miller@hp.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 13 12月, 2006 3 次提交
-
-
由 Jens Axboe 提交于
The previous cciss commit removed the err_out_disable_pdev label, but there was still a user of that. Fix that up. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 mike.miller@hp.com 提交于
This patch removes calls to pci_disable_device except in fail_all_cmds. The pci_disable_device function does something nasty to Smart Array controllers that pci_enable_device does not undo. So if the driver is unloaded it cannot be reloaded. Also, customers can disable any pci device via the ROM Based Setup Utility (RBSU). If the customer has disabled the controller we should not try to blindly enable the card from the driver. Please consider this for inclusion. Signed-off-by: NMike Miller <mike.miller@hp.com> Acked-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 mike.miller@hp.com 提交于
This patch maps out more memory for our config table. It's required to reach offset 0x214 to disable DMA on the P600. I'm not sure how I lost this hunk. Please consider this for inclusion. Signed-off-by: NMike Miller <mike.miller@hp.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 09 12月, 2006 1 次提交
-
-
由 Josef Sipek 提交于
Signed-off-by: NJosef Sipek <jsipek@fsl.cs.sunysb.edu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 08 12月, 2006 10 次提交
-
-
由 Mike Miller 提交于
A pretty simple cleanup for cciss_interrupt_mode. Signed-off-by: NMike Miller <mike.miller@hp.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mike Miller 提交于
Add the support for a large number of logical volumes. We will soon have hardware that support up to 1024 logical volumes. Signed-off-by: NMike Miller <mike.miller@hp.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mike Miller 提交于
Remove the no longer used revalidate_allvol function. It was replaced by rebuild_lun_table. Signed-off-by: NMike Miller <mike.miller@hp.com> Acked-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mike Miller 提交于
Change our open to test for drv->heads like we do in other places in the driver. Mostly for consistency. Signed-off-by: NMike Miller <mike.miller@hp.com> Acked-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mike Miller 提交于
Change the blk_queue_max_sectors from 512 to 2048. This helps increase performance. [akpm@osdl.org: s/sector_size/max_sectors/] Signed-off-by: NMike Miller <mike.miller@hp.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mike Miller 提交于
Unconditionally disable DMA prefetch on the P600 controller. An ASIC bug may result in prefetching beyond the end of physical memory. Signed-off-by: NMike Miller <mike.miller@hp.com> Acked-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mike Miller 提交于
Change the SSID on the E500 as a workaround for a firmware bug. It looks like the original patch was backed out between rc2 and rc4. Signed-off-by: NMike Miller <mike.miller@hp.com> Acked-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mike Miller 提交于
Remove #define NR_CMDS and replace it w/hba[i]->nr_cmds. Most Smart Array controllers can support up to 1024 commands but the E200 family can only support 128. To prevent annoying "fifo full" messages we define nr_cmds on a per controller basis by adding it the product table. Signed-off-by: NMike Miller <mike.miller@hp.com> Acked-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mike Miller 提交于
Add the support to fire up on any HP RAID class device that has a valid cciss signature. Signed-off-by: NMike Miller <mike.miller@hp.com> Acked-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mike Miller 提交于
Change the cciss version number to 3.6.14 to reflect the following functionality changes added by the rest of the set. They include: - Support to fire up on any HP RAID class controller - Increase nr_cmds to 512 for most controllers by adding it to the product table - PCI subsystem ID fix fix was pulled - Disable DMA prefetch for the P600 on IPF platforms - Change from 512 to 2048 sector_size for performance - Fix in cciss_open for consistency - Remove the no longer used revalidate_allvol function - Bug fix for busy configuring - Support for more than 16 logical volumes - Cleanups in cciss_interrupt_mode - Fix for iostats, it's been broken for several kernel releases Signed-off-by: NMike Miller <mike.miller@hp.com> Acked-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 15 11月, 2006 1 次提交
-
-
由 Jens Axboe 提交于
cciss needs to call disk_stat_add() for iostat to work. Signed-off-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 10月, 2006 1 次提交
-
-
由 Randy Dunlap 提交于
Fix printk format warnings: drivers/block/cciss.c:2000: warning: long long int format, long unsigned int arg (arg 2) drivers/block/cciss.c:2035: warning: long long int format, long unsigned int arg (arg 2) Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NMike Miller <mike.miller@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 22 10月, 2006 1 次提交
-
-
由 Matthew Wilcox 提交于
CCISS was producing warnings about shifts being greater than the size of the type and pointers being of incompatible type. Turns out this is because it's calling do_div on a 32-bit quantity. Upon further investigation, the sector_t total_size is being assigned to an int, and then we're calling do_div on that int. Obviously, sector_div is called for here, and I took the chance to refactor the code a little. Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Acked-by: NMike Miller <mike.miller@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 05 10月, 2006 1 次提交
-
-
由 David Howells 提交于
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: NDavid Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
-
- 04 10月, 2006 1 次提交
-
-
由 Dave Jones 提交于
kbuild explicitly includes this at build time. Signed-off-by: NDave Jones <davej@redhat.com>
-
- 01 10月, 2006 4 次提交
-
-
由 Peter Zijlstra 提交于
All on stack DECLARE_COMPLETIONs should be replaced by: DECLARE_COMPLETION_ONSTACK Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NIngo Molnar <mingo@elte.hu> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Metathronius Galabant 提交于
It removes the awkwards spaces after the "=" when displaying the geometry of the attached volumes. Before: cciss: using DAC cycles blocks= 286734240 block_size= 512 heads= 255, sectors= 32, cylinders= 35139 After: cciss: using DAC cycles blocks=286734240 block_size=512 heads=255, sectors=32, cylinders=35139 Signed-off-by: NMetathronius Galabant <m.galabant@gmail.com> Acked-by: NMike Miller <mike.miller@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mike Miller (OS Dev) 提交于
Add support for logical volumes >2TB. All SAS/SATA controllers support large volumes. Signed-off-by: NMike Miller <mike.miller@hp.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jens Axboe 提交于
Signed-off-by: NJens Axboe <axboe@suse.de>
-
- 13 9月, 2006 1 次提交
-
-
由 Mike Miller 提交于
Add support for new hardware and bumps the version to 3.6.10. It seems there were several changes introduced including soft_irq. I decided to bump the major number to reflect these changes. Since we're still supporting older vendor kernels I need some way differentiate between kernel versions <=2.6.10 and newer kernels >=2.6.16. Signed-off-by: NMike Miller <mike.miller@hp.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 25 7月, 2006 1 次提交
-
-
由 Jens Axboe 提交于
We need to postpone the queue startup until after the softirq handler has actually finished some requests, otherwise we could be racing with cciss_softirq_done() and not actually restart the queue handling. Signed-off-by: NJens Axboe <axboe@suse.de>
-