The soc_ops for dra7xx devices can be completed reused
from the ones used for omap4 and omap5 devices.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NR Sricharan <r.sricharan@ti.com>

The DRA7xx is a high-performance, infotainment application device,
based on enhanced OMAP architecture integrated on a 28-nm technology.

Since DRA7 is a platform supported only using DT, the cpu detection
is based on the compatibles passed from DT blobs as suggested here
http://lists.infradead.org/pipermail/linux-arm-kernel/2013-July/187712.htmlSuggested-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NR Sricharan <r.sricharan@ti.com>
Signed-off-by: NRajendra Nayak <rnayak@ti.com>

DRA7xx has 8 GPIO banks so that there are 32x8 = 256 GPIOs.
In order for the gpiolib to detect and initialize these
and other TWL GPIOs, ARCH_NR_GPIO is set to 512 using the
kconfig default for DRA7.
Signed-off-by: NR Sricharan <r.sricharan@ti.com>
Signed-off-by: NRajendra Nayak <rnayak@ti.com>

Describe minimal DT boot machine details for DRA7xx based SoC's. DRA7xx
family is based on dual core ARM CORTEX A15 using GIC as the interrupt controller.
The PRCM and timer infrastructure is reused from OMAP5 and so are the io
descriptor tables.
Signed-off-by: NR Sricharan <r.sricharan@ti.com>
Signed-off-by: NRajendra Nayak <rnayak@ti.com>

All of OMAP5 timer support for clocksource and clockevent is completely
reused across DRA7.
Signed-off-by: NR Sricharan <r.sricharan@ti.com>
Signed-off-by: NRajendra Nayak <rnayak@ti.com>

The IO descriptor tables for DRA7 are a complete reuse from OMAP5.
A new dra7xx_init_early() does the base address inits.
Signed-off-by: NR Sricharan <r.sricharan@ti.com>
Signed-off-by: NRajendra Nayak <rnayak@ti.com>

The PRCM and MPUSS parts of DRA7 devices are quite identical
to OMAP5 so as to reuse all the existing infrastructure around it.
Makefile updates to do just that.
Signed-off-by: NR Sricharan <r.sricharan@ti.com>
Signed-off-by: NRajendra Nayak <rnayak@ti.com>

If a transaction is rolled back, the Target Address Register (TAR), Processor
Priority Register (PPR) and Data Stream Control Register (DSCR) should be
restored to the checkpointed values before the transaction began.  Any changes
to these SPRs inside the transaction should not be visible in the abort
handler.

Currently Linux doesn't save or restore the checkpointed TAR, PPR or DSCR.  If
we preempt a processes inside a transaction which has modified any of these, on
process restore, that same transaction may be aborted we but we won't see the
checkpointed versions of these SPRs.

This adds checkpointed versions of these SPRs to the thread_struct and adds the
save/restore of these three SPRs to the treclaim/trechkpt code.

Without this if any of these SPRs are modified during a transaction, users may
incorrectly see a speculated SPR value even if the transaction is aborted.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Cc: <stable@vger.kernel.org> [v3.10]
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This moves us to save the Target Address Register (TAR) a earlier in
__switch_to.  It introduces a new function save_tar() to do this.

We need to save the TAR earlier as we will overwrite it in the transactional
memory reclaim/recheckpoint path.  We are going to do this in a subsequent
patch which will fix saving the TAR register when it's modified inside a
transaction.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Cc: <stable@vger.kernel.org> [v3.10]
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

POWER8 allows the DSCR to be accessed directly from userspace via a new SPR
number 0x3 (Rather than 0x11.  DSCR SPR number 0x11 is still used on POWER8 but
like POWER7, is only accessible in HV and OS modes).  Currently, we allow this
by setting H/FSCR DSCR bit on boot.

Unfortunately this doesn't work, as the kernel needs to see the DSCR change so
that it knows to no longer restore the system wide version of DSCR on context
switch (ie. to set thread.dscr_inherit).

This clears the H/FSCR DSCR bit initially.  If a process then accesses the DSCR
(via SPR 0x3), it'll trap into the kernel where we set thread.dscr_inherit in
facility_unavailable_exception().

We also change _switch() so that we set or clear the H/FSCR DSCR bit based on
the thread.dscr_inherit.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Cc: <stable@vger.kernel.org> [v3.10]
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This reworks the Facility Status and Control Regsiter (FSCR) config bit
definitions so that we can access the bit numbers.  This is needed for a
subsequent patch to fix the userspace DSCR handling.

HFSCR and FSCR bit definitions are the same, so reuse them.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Cc: <stable@vger.kernel.org> [v3.10]
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Currently if we take hypervisor facility unavaliable (from 0xf80/0x4f80) we
mark it as an OS facility unavaliable (0xf60) as the two share the same code
path.

The becomes a problem in facility_unavailable_exception() as we aren't able to
see the hypervisor facility unavailable exceptions.

Below fixes this by duplication the required macros.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Cc: <stable@vger.kernel.org> [v3.10]
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

err was overwritten by a previous function call, and checked to be 0. If
the following page allocation fails, 0 is going to be returned instead
of -ENOMEM.
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

'rmls' is 'unsigned long', lpcr_rmls() will return negative number when
failure occurs, so it need a type cast for comparing.

'lpid' is 'unsigned long', kvmppc_alloc_lpid() return negative number
when failure occurs, so it need a type cast for comparing.
Signed-off-by: NChen Gang <gang.chen@asianux.com>
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The procfs entry for global statistics has been missed on PowerNV
platform and the patch is going to add that.
Signed-off-by: NMike Qiu <qiudayu@linux.vnet.ibm.com>
Acked-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Older kernels has just length information in their header. Handle it
while reading old kernel oops log from pstore.

Applies on top of powerpc/pseries: Fix buffer overflow when reading from pstore
Signed-off-by: NAruna Balakrishnaiah <aruna@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

When reading from pstore there is a buffer overflow during decompression
due to the header added in unzip_oops. Remove unzip_oops and call
pstore_decompress directly in nvram_pstore_read. Allocate buffer of size
report_length of the oops header as header will not be deallocated in pstore.
Since we have 'openssl' command line tool to decompress the compressed data,
dump the compressed data in case decompression fails instead of not dumping
anything.
Signed-off-by: NAruna Balakrishnaiah <aruna@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We want PPC_DENORMALISATION enabled when POWERNV is enabled,
so update the Kconfig.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Acked-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org>

there is an additional "{", which causes building error.
Signed-off-by: NCong Ding <dinggnu@gmail.com>
Acked-by: NHans-Christian Egtvedt <egtvedt@samfundet.no>

The hardware interrupt routing for boot CPU != 0 is wrong because it
will route all the hardware interrupts to TP0 which is not the one we
booted from. Fix this by properly checking which boot CPU we are booting
from and updating the right interrupt mask for the boot CPU. This fixes
booting on BCM3368 with bmips_smp_emabled = 0.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: blogic@openwrt.org
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Patchwork: https://patchwork.linux-mips.org/patch/5650/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

current_cpu_type() is not preemption-safe.
If CONFIG_PREEMPT is enabled then mipsxx_reg_setup() can be called from preemptible state.
Added get_cpu()/put_cpu() pair to make it preemption-safe.

This was found while testing oprofile with CONFIG_DEBUG_PREEMPT enable.

/usr/zntestsuite # opcontrol --init
/usr/zntestsuite # opcontrol --setup --event=L2_CACHE_ACCESSES:500 --event=L2_CACHE_MISSES:500 --no-vmlinux
/usr/zntestsuite # opcontrol --start
Using 2.6+ OProfile kernel interface.
BUG: using smp_processor_id() in preemptible [00000000] code: oprofiled/1362
caller is mipsxx_reg_setup+0x11c/0x164
CPU: 0 PID: 1362 Comm: oprofiled Not tainted 3.10.4 #18
Stack : 00000006 70757465 00000000 00000000 00000000 00000000 80b173f6 00000037
          80b10000 00000000 80b21614 88f5a220 00000000 00000000 00000000 00000000
          00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
          00000000 00000000 00000000 89c49c00 89c49c2c 80721254 807b7927 8012c1d0
          80b10000 80721254 00000000 00000552 88f5a220 80b1335c 807b78e6 89c49ba8
          ...
Call Trace:
[<801099a4>] show_stack+0x64/0x7c
[<80665520>] dump_stack+0x20/0x2c
[<803a2250>] debug_smp_processor_id+0xe0/0xf0
[<8052df24>] mipsxx_reg_setup+0x11c/0x164
[<8052cd70>] op_mips_setup+0x24/0x4c
[<80529cfc>] oprofile_setup+0x5c/0x12c
[<8052b9f8>] event_buffer_open+0x78/0xf8
[<801c3150>] do_dentry_open.isra.15+0x2b8/0x3b0
[<801c3270>] finish_open+0x28/0x4c
[<801d49b8>] do_last.isra.41+0x2cc/0xd00
[<801d54a0>] path_openat+0xb4/0x4c4
[<801d5c44>] do_filp_open+0x3c/0xac
[<801c4744>] do_sys_open+0x110/0x1f4
[<8010f47c>] stack_done+0x20/0x44

Bug reported and original patch by Jerin Jacob <jerinjacobk@gmail.com>.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Acked-by: NJerin Jacob <jerinjacobk@gmail.com>

The PNX8335_PCI_ETHERNET_INT macro is defined in
arch/mips/include/asm/mach-pnx833x/irq-mapping.h
only if CONFIG_SOC_PNX8335 is selected.

Fixes the following randconfig problem:
arch/mips/pnx833x/common/platform.c:210:12:
error: 'PNX8335_PIC_ETHERNET_INT' undeclared here
(not in a function)
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>
Acked-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5585/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This was missed when splitting out the phy from the controller node in
commit 9dffe3be (ARM: tegra: modify ULPI reset GPIO properties).
Signed-off-by: NLucas Stach <dev@lynxeye.de>
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This patch removes sti_secondary_start from _INIT section, there are 2
reason for this removal.
 1. discarding such a small code does not save much, given the RAM
sizes.
 2. Having this code discarded, creates corruption issue when we boot
smp-kernel with nrcpus=1 or with single cpu node in DT.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This patch fixes cpu nodes with device_type = "cpu". This change was not
necessary before 3.10-rc7.
Without this patch STi SOCs does not boot as SMP.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Olof reports that noMMU builds error out with:

arch/arm/kernel/signal.c: In function 'setup_return':
arch/arm/kernel/signal.c:413:25: error: 'mm_context_t' has no member named 'sigpage'

This shows one of the evilnesses of IS_ENABLED().  Get rid of it here
and replace it with #ifdef's - and as no noMMU platform can make use
of sigpage, depend on CONIFG_MMU not CONFIG_ARM_MPU.
Reported-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Unfortunately, I never committed the fix to a nasty oops which can
occur as a result of that commit:

------------[ cut here ]------------
kernel BUG at /home/olof/work/batch/include/linux/mm.h:414!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 490 Comm: killall5 Not tainted 3.11.0-rc3-00288-gabe03080 #53
task: e90acac0 ti: e9be8000 task.ti: e9be8000
PC is at special_mapping_fault+0xa4/0xc4
LR is at __do_fault+0x68/0x48c

This doesn't show up unless you do quite a bit of testing; a simple
boot test does not do this, so all my nightly tests were passing fine.

The reason for this is that install_special_mapping() expects the
page array to stick around, and as this was only inserting one page
which was stored on the kernel stack, that's why this was blowing up.
Reported-by: NOlof Johansson <olof@lixom.net>
Tested-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Panda's DVI connector's DDC pins are connected to OMAP's third i2c bus.
With non-DT, the bus number was 3, and that is what is used in the
dss-common.c which contains the platform data for Panda's DVI.

However, with DT, the bus number is 2. As we now only have DT boot for
Panda, we have to change the bus number to make DVI EDID read
operational.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>

Commit 8bd26e3a (arm: delete __cpuinit/__CPUINIT usage from all ARM
users) caused some code to leak into sections which are discarded
through the removal of __CPUINIT annotations.  Add appropriate .text
annotations to bring these back into the kernel text.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

If one process calls sys_reboot and that process then stops other
CPUs while those CPUs are within a spin_lock() region we can
potentially encounter a deadlock scenario like below.

CPU 0                   CPU 1
-----                   -----
                        spin_lock(my_lock)
smp_send_stop()
 <send IPI>             handle_IPI()
                         disable_preemption/irqs
                          while(1);
 <PREEMPT>
spin_lock(my_lock) <--- Waits forever

We shouldn't attempt to run any other tasks after we send a stop
IPI to a CPU so disable preemption so that this task runs to
completion. We use local_irq_disable() here for cross-arch
consistency with x86.
Reported-by: NSundarajan Srinivasan <sundaraj@codeaurora.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

If kuser helpers are not provided by the kernel, disable user access to
the vectors page.  With the kuser helpers gone, there is no reason for
this page to be visible to userspace.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Move the signal handlers into a VDSO page rather than keeping them in
the vectors page.  This allows us to place them randomly within this
page, and also map the page at a random location within userspace
further protecting these code fragments from ROP attacks.  The new
VDSO page is also poisoned in the same way as the vector page.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

When an associativity level change is found for one thread, the
siblings threads need to be updated as well.  This is done today
for PRRN in stage_topology_update() but is missing for VPHN in
update_cpu_associativity_changes_mask().  This patch will correctly
update all thread siblings during a topology change.

Without this patch a topology update can result in a CPU in
init_sched_groups_power() getting stuck indefinitely in a loop.

This loop is built in build_sched_groups(). As a result of the thread
moving to a node separate from its siblings the struct sched_group will
have its next pointer set to point to itself rather than the sched_group
struct of the next thread.  This happens because we have a domain without
the SD_OVERLAP flag, which is correct, and a topology that doesn't conform
with reality (threads on the same core assigned to different numa nodes).
When this list is traversed by init_sched_groups_power() it will reach
the thread's sched_group structure and loop indefinitely; the cpu will
be stuck at this point.

The bug was exposed when VPHN was enabled in commit b7abef04 (v3.9).

Cc: <stable@vger.kernel.org> [v3.9+]
Reported-by: NJan Stancek <jstancek@redhat.com>
Signed-off-by: NRobert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We use bit 63 of the event code for userspace to request that the event
be counted using EBB (Event Based Branches). Export this value, making
it part of the API - though only on processors that support EBB.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Back in commit 89713ed1 "Add timer, performance monitor and machine check
counts to /proc/interrupts" we added a count of PMU interrupts to the
output of /proc/interrupts.

At the time we named them "CNT" to match x86.

However in commit 89ccf465 "Rename 'performance counter interrupt'", the
x86 guys renamed theirs from "CNT" to "PMI".

Arguably changing the name could break someone's script, but I think the
chance of that is minimal, and it's preferable to have a name that 1) is
somewhat meaningful, and 2) matches x86.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We can't use dev->mod_index for selecting the interrupt routing entry,
because it's not an index into interrupt routing table. It will be even
wrong on a machine with 2 CPUs (4 cores). But all needed information is
contained in the PAT entries for the serial ports. mod[0] contains the
iosapic address and mod_info has some indications for the interrupt
input (at least it looks like it). This patch implements the searching
for the right iosapic and uses this interrupt input information.
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org> # 3.10
Signed-off-by: NHelge Deller <deller@gmx.de>

The KERNEL_SYSCALL define is not used anymore so the header can be
removed.
Signed-off-by: NJohn David Anglin <dave.anglin@bell.net>
Signed-off-by: NHelge Deller <deller@gmx.de>

Signed-off-by: NHelge Deller <deller@gmx.de>

The parisc architecture does not have a pte special bit. As a result,
special mappings are handled with the VM_PFNMAP and VM_MIXEDMAP flags.
VM_MIXEDMAP mappings may or may not have a "struct page" backing. When
pfn_valid() is false, there is no "struct page" backing. Otherwise, they
are treated as normal pages.

The FireGL driver uses the VM_MIXEDMAP without a backing "struct page".
This treatment caused a panic due to a TLB data miss in
update_mmu_cache. This appeared to be in the code generated for
page_address(). We were in fact using a very circular bit of code to
determine the physical address of the PFN in various cache routines.
This wasn't valid when there was no "struct page" backing.  The needed
address can in fact be determined simply from the PFN itself without
using the "struct page".

The attached patch updates update_mmu_cache(), flush_cache_mm(),
flush_cache_range() and flush_cache_page() to check pfn_valid() and to
directly compute the PFN physical and virtual addresses.
Signed-off-by: NJohn David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org> # 3.10
Signed-off-by: NHelge Deller <deller@gmx.de>

Fix the build:

  arch/x86/platform/ce4100/ce4100.c: In function 'x86_ce4100_early_setup':
  arch/x86/platform/ce4100/ce4100.c:165:2: error: 'reboot_type' undeclared (first use in this function)
Reported-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>