OMAP2430 I2CHS modules require specific hardware ops to be used, so added
a new compatible string for this.
Signed-off-by: NTero Kristo <t-kristo@ti.com>

This patch adds support for omap2 type aplls, which have gating and
autoidle functionality.
Signed-off-by: NTero Kristo <t-kristo@ti.com>

OMAP2 has slightly different DPLL compared to later OMAP generations.
This patch adds support for the ti,omap2-dpll-core-clock and also adds
the bindings documentation.
Signed-off-by: NTero Kristo <t-kristo@ti.com>

The race was introduced while development of linux-3.11 by
e8437d7e and
e9975fde.
Originally it was found and reproduced on linux-3.12.15 and
linux-3.12.15-rt25, by sending 500 byte blocks with 115kbaud to the
target uart in a loop with 100 milliseconds delay.

In short:
 1. The consumer flush_to_ldisc is on to remove the head tty_buffer.
 2. The producer adds a number of bytes, so that a new tty_buffer must
	be allocated and added by __tty_buffer_request_room.
 3. The consumer removes the head tty_buffer element, without handling
	newly committed data.

Detailed example:
 * Initial buffer:
   * Head, Tail -> 0: used=250; commit=250; read=240; next=NULL
 * Consumer: ''flush_to_ldisc''
   * consumed 10 Byte
   * buffer:
     * Head, Tail -> 0: used=250; commit=250; read=250; next=NULL
{{{
		count = head->commit - head->read;	// count = 0
		if (!count) {				// enter
			// INTERRUPTED BY PRODUCER ->
			if (head->next == NULL)
				break;
			buf->head = head->next;
			tty_buffer_free(port, head);
			continue;
		}
}}}
 * Producer: tty_insert_flip_... 10 bytes + tty_flip_buffer_push
   * buffer:
     * Head, Tail -> 0: used=250; commit=250; read=250; next=NULL
   * added 6 bytes: head-element filled to maximum.
     * buffer:
       * Head, Tail -> 0: used=256; commit=250; read=250; next=NULL
   * added 4 bytes: __tty_buffer_request_room is called
     * buffer:
       * Head -> 0: used=256; commit=256; read=250; next=1
       * Tail -> 1: used=4; commit=0; read=250 next=NULL
   * push (tty_flip_buffer_push)
     * buffer:
       * Head -> 0: used=256; commit=256; read=250; next=1
       * Tail -> 1: used=4; commit=4; read=250 next=NULL
 * Consumer
{{{
		count = head->commit - head->read;
		if (!count) {
			// INTERRUPTED BY PRODUCER <-
			if (head->next == NULL)		// -> no break
				break;
			buf->head = head->next;
			tty_buffer_free(port, head);
			// ERROR: tty_buffer head freed -> 6 bytes lost
			continue;
		}
}}}

This patch reintroduces a spin_lock to protect this case. Perhaps later
a lock-less solution could be found.
Signed-off-by: NManfred Schlaegl <manfred.schlaegl@gmx.at>
Cc: stable <stable@vger.kernel.org> # 3.11
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes a regression on Keystone 2 platforms caused by patch
57303488
"usb: dwc3: adapt dwc3 core to use Generic PHY Framework" which adds
optional support of generic phy in DWC3 core.

On Keystone 2 platforms the USB is not working now because
CONFIG_GENERIC_PHY isn't set and, as result, Generic PHY APIs stubs
return -ENOSYS always. The log shows:
 dwc3 2690000.dwc3: failed to initialize core
 dwc3: probe of 2690000.dwc3 failed with error -38

Hence, fix it by making NULL a valid phy reference in Generic PHY
APIs stubs in the same way as it was done by the patch
04c2faca "drivers: phy: Make NULL
a valid phy reference".
Acked-by: NFelipe Balbi <balbi@ti.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

File-private locks have been re-christened as "open file description"
locks.  Finish the symbol name cleanup in the internal implementation.
Signed-off-by: NJeff Layton <jlayton@redhat.com>

serio devices exposed via platform firmware interfaces such as ACPI may
provide additional identifying information of use to userspace.

We don't associate the serio devices with the firmware device (we don't
set it as parent), so there's no way for userspace to make use of this
information.

We cannot change the parent for serio devices instantiated though a
firmware interface as that would break suspend / resume ordering.

Therefore this patch adds a new firmware_id sysfs attribute so that
userspace can get a string from there with any additional identifying
information the firmware interface may provide.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NPeter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Stick in a comment before someone else tries to fix the sparse warning
this generates.
Suggested-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-o2ro6f3vkxklni0bc8f7m68s@git.kernel.orgSigned-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

shiraz.hashim@st.com email-id doesn't exist anymore as he has left the
company.  Replace ST's id with shiraz.linux.kernel@gmail.com.

It also updates .mailmap file to fix address for 'git shortlog'.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The AHCI spec allows implementations to issue commands in tag order
rather than FIFO order:

	5.3.2.12 P:SelectCmd
	HBA sets pSlotLoc = (pSlotLoc + 1) mod (CAP.NCS + 1)
	or HBA selects the command to issue that has had the
	PxCI bit set to '1' longer than any other command
	pending to be issued.

The result is that commands posted sequentially (time-wise) may play out
of sequence when issued by hardware.

This behavior has likely been hidden by drives that arrange for commands
to complete in issue order.  However, it appears recent drives (two from
different vendors that we have found so far) inflict out-of-order
completions as a matter of course.  So, we need to take care to maintain
ordered submission, otherwise we risk triggering a drive to fall out of
sequential-io automation and back to random-io processing, which incurs
large latency and degrades throughput.

This issue was found in simple benchmarks where QD=2 seq-write
performance was 30-50% *greater* than QD=32 seq-write performance.

Tagging for -stable and making the change globally since it has a low
risk-to-reward ratio.  Also, word is that recent versions of an unnamed
OS also does it this way now.  So, drives in the field are already
experienced with this tag ordering scheme.

Cc: <stable@vger.kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ed Ciechanowski <ed.ciechanowski@intel.com>
Reviewed-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Drivers that call regulator_get_optional are tolerant to the absence of
that regulator.  By modifying the value returned from the stub function
to match that seen when a regulator isn't present, callers can wrap the
regulator logic with an IS_ERR based conditional even if they happen to
call regulator_is_supported_voltage.  This improves efficiency as well
as eliminates the possibility for a very subtle bug.
Signed-off-by: NTim Kryger <tim.kryger@linaro.org>
Reviewed-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NMark Brown <broonie@linaro.org>

Add an empty version of of_find_node_by_path().
This fixes following build error for asoc tree:
sound/soc/fsl/fsl_ssi.c: In function 'fsl_ssi_probe':
sound/soc/fsl/fsl_ssi.c:1471:2: error: implicit declaration of function 'of_find_node_by_path' [-Werror=implicit-function-declaration]
  sprop = of_get_property(of_find_node_by_path("/"), "compatible", NULL);
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NRob Herring <robh@kernel.org>

The current implementation of irq_set_affinity() refuses rightfully to
route an interrupt to an offline cpu.

But there is a special case, where this is actually desired. Some of
the ARM SoCs have per cpu timers which require setting the affinity
during cpu startup where the cpu is not yet in the online mask.

If we can't do that, then the local timer interrupt for the about to
become online cpu is routed to some random online cpu.

The developers of the affected machines tried to work around that
issue, but that results in a massive mess in that timer code.

We have a yet unused argument in the set_affinity callbacks of the irq
chips, which I added back then for a similar reason. It was never
required so it got not used. But I'm happy that I never removed it.

That allows us to implement a sane handling of the above scenario. So
the affected SoC drivers can add the required force handling to their
interrupt chip, switch the timer code to irq_force_affinity() and
things just work.

This does not affect any existing user of irq_set_affinity().

Tagged for stable to allow a simple fix of the affected SoC clock
event drivers.
Reported-and-tested-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Tomasz Figa <t.figa@samsung.com>,
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>,
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: linux-arm-kernel@lists.infradead.org,
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20140416143315.717251504@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Convert some ints to bools.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The IPMI driver would wake up periodically looking for events and
watchdog pretimeouts.  If there is nothing waiting for these events,
it's really kind of pointless to be checking for them.  So modify the
driver so the message handler can pass down if it needs the lower layer
to be waiting for these.  Modify the system interface lower layer to
turn off all timer and thread activity if the upper layer doesn't need
anything and it is not currently handling messages.  And modify the
message handler to not restart the timer if its timer is not needed.

The timers and kthread will still be enabled if:
 - the SI interface is handling a message.
 - a user has enabled watching for events.
 - the IPMI watchdog timer is in use (since it uses pretimeouts).
 - the message handler is waiting on a remote response.
 - a user has registered to receive commands.

This mostly affects interfaces without interrupts.  Interfaces with
interrupts already don't use CPU in the system interface when the
interface is idle.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Only ws2012r2 hosts support the ability to reconnect to the host on VMBUS. This functionality
is needed by kexec in Linux. To use this functionality we need to negotiate version 3.0 of the
VMBUS protocol.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Cc: <stable@vger.kernel.org>        [3.9+]
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This is for a system with fixed assignments of input and output pins
(various variants of Kontron COMe).
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some systems using mdio-gpio may use active-low gpio pins
(eg with inverters or FETs connected to all or some of the
gpio pins).
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

All device_schedule_callback_owner() users are converted to use
device_remove_file_self().  Remove now unused
{sysfs|device}_schedule_callback_owner().
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit adds the necessary definitions for the PHY layer to
recognize "qsgmii" as a valid PHY interface. A QSMII interface, as
defined at
http://en.wikipedia.org/wiki/Media_Independent_Interface#Quad_Serial_Gigabit_Media_Independent_Interface,
is "is a method of combining four SGMII lines into a 5Gbit/s
interface. QSGMII, like SGMII, uses LVDS signalling for the TX and RX
data and a single LVDS clock signal. QSGMII uses significantly fewer
signal lines than four SGMII busses."

This type of MAC <-> PHY connection might require special handling on
the MAC driver side, so it should be possible to express this type of
MAC <-> PHY connection, for example in the Device Tree.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: devicetree@vger.kernel.org
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Steve reported a reboot hang and bisected it back to this commit:

  a4f1987e x86, reboot: Add EFI and CF9 reboot methods into the default list

He heroically tested all reboot methods and found the following:

  reboot=t       # triple fault                  ok
  reboot=k       # keyboard ctrl                 FAIL
  reboot=b       # BIOS                          ok
  reboot=a       # ACPI                          FAIL
  reboot=e       # EFI                           FAIL   [system has no EFI]
  reboot=p       # PCI 0xcf9                     FAIL

And I think it's pretty obvious that we should only try PCI 0xcf9 as a
last resort - if at all.

The other observation is that (on this box) we should never try
the PCI reboot method, but close with either the 'triple fault'
or the 'BIOS' (terminal!) reboot methods.

Thirdly, CF9_COND is a total misnomer - it should be something like
CF9_SAFE or CF9_CAREFUL, and 'CF9' should be 'CF9_FORCE' ...

So this patch fixes the worst problems:

 - it orders the actual reboot logic to follow the reboot ordering
   pattern - it was in a pretty random order before for no good
   reason.

 - it fixes the CF9 misnomers and uses BOOT_CF9_FORCE and
   BOOT_CF9_SAFE flags to make the code more obvious.

 - it tries the BIOS reboot method before the PCI reboot method.
   (Since 'BIOS' is a terminal reboot method resulting in a hang
    if it does not work, this is essentially equivalent to removing
    the PCI reboot method from the default reboot chain.)

 - just for the miraculous possibility of terminal (resulting
   in hang) reboot methods of triple fault or BIOS returning
   without having done their job, there's an ordering between
   them as well.
Reported-and-bisected-and-tested-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Li Aubrey <aubrey.li@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Link: http://lkml.kernel.org/r/20140404064120.GB11877@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

While reviewing seccomp code, we found that BPF_S_ANC_SECCOMP_LD_W has
been wrongly decoded by commit a8fc9277 ("sk-filter: Add ability to
get socket filter program (v2)") into the opcode BPF_LD|BPF_B|BPF_ABS
although it should have been decoded as BPF_LD|BPF_W|BPF_ABS.

In practice, this should not have much side-effect though, as such
conversion is/was being done through prctl(2) PR_SET_SECCOMP. Reverse
operation PR_GET_SECCOMP will only return the current seccomp mode, but
not the filter itself. Since the transition to the new BPF infrastructure,
it's also not used anymore, so we can simply remove this as it's
unreachable.

Fixes: a8fc9277 ("sk-filter: Add ability to get socket filter program (v2)")
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Several spots in the kernel perform a sequence like:

	skb_queue_tail(&sk->s_receive_queue, skb);
	sk->sk_data_ready(sk, skb->len);

But at the moment we place the SKB onto the socket receive queue it
can be consumed and freed up.  So this skb->len access is potentially
to freed up memory.

Furthermore, the skb->len can be modified by the consumer so it is
possible that the value isn't accurate.

And finally, no actual implementation of this callback actually uses
the length argument.  And since nobody actually cared about it's
value, lots of call sites pass arbitrary values in such as '0' and
even '1'.

So just remove the length argument from the callback, that way there
is no confusion whatsoever and all of these use-after-free cases get
fixed as a side effect.

Based upon a patch by Eric Dumazet and his suggestion to audit this
issue tree-wide.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

'struct page' has two list_head fields: 'lru' and 'list'.  Conveniently,
they are unioned together.  This means that code can use them
interchangably, which gets horribly confusing like with this nugget from
slab.c:

>	list_del(&page->lru);
>	if (page->active == cachep->num)
>		list_add(&page->list, &n->slabs_full);

This patch makes the slab and slub code use page->lru universally instead
of mixing ->list and ->lru.

So, the new rule is: page->lru is what the you use if you want to keep
your page on a list.  Don't like the fact that it's not called ->list?
Too bad.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NPekka Enberg <penberg@kernel.org>

Add support for the block multicast loopback QP creation flag along
the proper firmware API for that.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

On systems with CONFIG_COMPAT we introduced the new requirement that
audit_classify_compat_syscall() exists.  This wasn't true for everything
(apparently not for "tilegx", which I know less that nothing about.)

Instead of wrapping the preprocessor optomization with CONFIG_COMPAT we
should have used the new CONFIG_AUDIT_COMPAT_GENERIC.  This patch uses
that config option to make sure only arches which intend to implement
this have the requirement.

This works fine for tilegx according to Chris Metcalf
Signed-off-by: NEric Paris <eparis@redhat.com>

For commands returned with failed status, queue these for resubmission
and continue retrying them until success or for a limited amount of
time. The final timeout was arbitrarily chosen so requests can't be
retried indefinitely.

Since these are requeued on the nvmeq that submitted the command, the
callbacks have to take an nvmeq instead of an nvme_dev as a parameter
so that we can use the locked queue to append the iod to retry later.

The nvme_iod conviently can be used to track how long we've been trying
to successfully complete an iod request. The nvme_iod also provides the
nvme prp dma mappings, so I had to move a few things around so we can
keep those mappings.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
[fixed checkpatch issue with long line]
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>

Increase the default timeout to 30 seconds to match SCSI.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
[use byte instead of ushort]
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>

Registers with hot cpu notification to rebalance, and potentially allocate
additional, io queues.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>

The device's IO queues are associated with CPUs, so we can use a per-cpu
variable to map the a qid to a cpu. This provides a convienient way
to optimally assign queues to multiple cpus when the device supports
fewer queues than the host has cpus. The previous implementation may
have assigned these poorly in these situations. This patch addresses
this by sharing queues among cpus that are "close" together and should
have a lower lock contention penalty.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>

Martin reported that his test system would not boot with
current git, it oopsed with this:

BUG: unable to handle kernel paging request at ffff88046c6c9e80
IP: [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150
PGD 1ddf067 PUD 1de2067 PMD 47fc7d067 PTE 800000046c6c9060
Oops: 0002 [#1] SMP DEBUG_PAGEALLOC
Modules linked in: sd_mod lpfc(+) scsi_transport_fc scsi_tgt oracleasm
rpcsec_gss_krb5 ipv6 igb dca i2c_algo_bit i2c_core hwmon
CPU: 3 PID: 87 Comm: kworker/u17:1 Not tainted 3.14.0+ #246
Hardware name: Supermicro X9DRX+-F/X9DRX+-F, BIOS 3.00 07/09/2013
Workqueue: events_unbound async_run_entry_fn
task: ffff8802743c2150 ti: ffff880273d02000 task.ti: ffff880273d02000
RIP: 0010:[<ffffffff812971e0>]  [<ffffffff812971e0>]
blk_queue_start_tag+0x90/0x150
RSP: 0018:ffff880273d03a58  EFLAGS: 00010092
RAX: ffff88046c6c9e78 RBX: ffff880077208e78 RCX: 00000000fffc8da6
RDX: 00000000fffc186d RSI: 0000000000000009 RDI: 00000000fffc8d9d
RBP: ffff880273d03a88 R08: 0000000000000001 R09: ffff8800021c2410
R10: 0000000000000005 R11: 0000000000015b30 R12: ffff88046c5bb8a0
R13: ffff88046c5c0890 R14: 000000000000001e R15: 000000000000001e
FS:  0000000000000000(0000) GS:ffff880277b00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff88046c6c9e80 CR3: 00000000018f6000 CR4: 00000000000407e0
Stack:
 ffff880273d03a98 ffff880474b18800 0000000000000000 ffff880474157000
 ffff88046c5c0890 ffff880077208e78 ffff880273d03ae8 ffffffff813b9e62
 ffff880200000010 ffff880474b18968 ffff880474b18848 ffff88046c5c0cd8
Call Trace:
 [<ffffffff813b9e62>] scsi_request_fn+0xf2/0x510
 [<ffffffff81293167>] __blk_run_queue+0x37/0x50
 [<ffffffff8129ac43>] blk_execute_rq_nowait+0xb3/0x130
 [<ffffffff8129ad24>] blk_execute_rq+0x64/0xf0
 [<ffffffff8108d2b0>] ? bit_waitqueue+0xd0/0xd0
 [<ffffffff813bba35>] scsi_execute+0xe5/0x180
 [<ffffffff813bbe4a>] scsi_execute_req_flags+0x9a/0x110
 [<ffffffffa01b1304>] sd_spinup_disk+0x94/0x460 [sd_mod]
 [<ffffffff81160000>] ? __unmap_hugepage_range+0x200/0x2f0
 [<ffffffffa01b2b9a>] sd_revalidate_disk+0xaa/0x3f0 [sd_mod]
 [<ffffffffa01b2fb8>] sd_probe_async+0xd8/0x200 [sd_mod]
 [<ffffffff8107703f>] async_run_entry_fn+0x3f/0x140
 [<ffffffff8106a1c5>] process_one_work+0x175/0x410
 [<ffffffff8106b373>] worker_thread+0x123/0x400
 [<ffffffff8106b250>] ? manage_workers+0x160/0x160
 [<ffffffff8107104e>] kthread+0xce/0xf0
 [<ffffffff81070f80>] ? kthread_freezable_should_stop+0x70/0x70
 [<ffffffff815f0bac>] ret_from_fork+0x7c/0xb0
 [<ffffffff81070f80>] ? kthread_freezable_should_stop+0x70/0x70
Code: 48 0f ab 11 72 db 48 81 4b 40 00 00 10 00 89 83 08 01 00 00 48 89
df 49 8b 04 24 48 89 1c d0 e8 f7 a8 ff ff 49 8b 85 28 05 00 00 <48> 89
58 08 48 89 03 49 8d 85 28 05 00 00 48 89 43 08 49 89 9d
RIP  [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150
 RSP <ffff880273d03a58>
CR2: ffff88046c6c9e80

Martin bisected and found this to be the problem patch;

	commit 6d113398
	Author: Jan Kara <jack@suse.cz>
	Date:   Mon Feb 24 16:39:54 2014 +0100

	    block: Stop abusing rq->csd.list in blk-softirq

and the problem was immediately apparent. The patch states that
it is safe to reuse queuelist at completion time, since it is
no longer used. However, that is not true if a device is using
block enabled tagging. If that is the case, then the queuelist
is reused to keep track of busy tags. If a device also ended
up using softirq completions, we'd reuse ->queuelist for the
IPI handling while block tagging was still using it. Boom.

Fix this by adding a new ipi_list list head, and share the
memory used with the request hash table. The hash table is
never used after the request is moved to the dispatch list,
which happens long before any potential completion of the
request. Add a new request bit for this, so we don't have
cases that check rq->hash while it could potentially have
been reused for the IPI completion.
Reported-by: NMartin K. Petersen <martin.petersen@oracle.com>
Tested-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

gcc <= 4.5.x has significant limitations with respect to initialization
of anonymous unions within structures. They need to be surrounded by
brackets, _and_ they need to be initialized in the same order in which
they appear in the structure declaration.

Link: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=10676
Link: http://lkml.kernel.org/r/1397077568-3156-1-git-send-email-mathieu.desnoyers@efficios.comSigned-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Similar to the fix in 40413dcb

MODULE_DEVICE_TABLE(x86cpu, ...) expects the struct to be called struct
x86cpu_device_id, and not struct x86_cpu_id which is what is used in the rest
of the kernel code.  Although gcc seems to ignore this error, clang fails
without this define to fix the name.

Code from drivers/thermal/x86_pkg_temp_thermal.c
static const struct x86_cpu_id __initconst pkg_temp_thermal_ids[] = { ... };
MODULE_DEVICE_TABLE(x86cpu, pkg_temp_thermal_ids);

Error from clang:
drivers/thermal/x86_pkg_temp_thermal.c:577:1: error: variable has
      incomplete type 'const struct x86cpu_device_id'
MODULE_DEVICE_TABLE(x86cpu, pkg_temp_thermal_ids);
^
include/linux/module.h:145:3: note: expanded from macro
      'MODULE_DEVICE_TABLE'
  MODULE_GENERIC_TABLE(type##_device, name)
  ^
include/linux/module.h:87:32: note: expanded from macro
      'MODULE_GENERIC_TABLE'
extern const struct gtype##_id __mod_##gtype##_table            \
                               ^
<scratch space>:143:1: note: expanded from here
__mod_x86cpu_device_table
^
drivers/thermal/x86_pkg_temp_thermal.c:577:1: note: forward declaration of
      'struct x86cpu_device_id'
include/linux/module.h:145:3: note: expanded from macro
      'MODULE_DEVICE_TABLE'
  MODULE_GENERIC_TABLE(type##_device, name)
  ^
include/linux/module.h:87:21: note: expanded from macro
      'MODULE_GENERIC_TABLE'
extern const struct gtype##_id __mod_##gtype##_table            \
                    ^
<scratch space>:141:1: note: expanded from here
x86cpu_device_id
^
1 error generated.
Signed-off-by: NBehan Webster <behanw@converseincode.com>
Signed-off-by: NJan-Simon Möller <dl9pf@gmx.de>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a compiler-clang.h file to add specific macros needed for compiling the
kernel with clang.

Initially the only override required is the macro for silencing the
compiler for a purposefully uninintialized variable.

Author: Mark Charlebois <charlebm@gmail.com>
Signed-off-by: NMark Charlebois <charlebm@gmail.com>
Signed-off-by: NBehan Webster <behanw@converseincode.com>

Fix the following sparse warnings:

  CHECK   kernel/tracepoint.c
kernel/tracepoint.c:184:18: warning: incorrect type in assignment (different address spaces)
kernel/tracepoint.c:184:18:    expected struct tracepoint_func *tp_funcs
kernel/tracepoint.c:184:18:    got struct tracepoint_func [noderef] <asn:4>*funcs
kernel/tracepoint.c:216:18: warning: incorrect type in assignment (different address spaces)
kernel/tracepoint.c:216:18:    expected struct tracepoint_func *tp_funcs
kernel/tracepoint.c:216:18:    got struct tracepoint_func [noderef] <asn:4>*funcs
kernel/tracepoint.c:392:24: error: return expression in void function
  CC      kernel/tracepoint.o
kernel/tracepoint.c: In function tracepoint_module_going:
kernel/tracepoint.c:491:6: warning: symbol 'syscall_regfunc' was not declared. Should it be static?
kernel/tracepoint.c:508:6: warning: symbol 'syscall_unregfunc' was not declared. Should it be static?

Link: http://lkml.kernel.org/r/1397049883-28692-1-git-send-email-mathieu.desnoyers@efficios.comSigned-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Commit 4550dd6c introduced for_each_bvec() which iterates over each
bvec attached to a bio or bip. However, the macro fails to check bi_size
before dereferencing which can lead to crashes while counting/mapping
integrity scatterlist segments.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Cc: Kent Overstreet <kmo@daterainc.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: NJens Axboe <axboe@fb.com>

Instead of copying the num_tracepoints and tracepoints_ptrs from
the module structure to the tp_mod structure, which only uses it to
find the module associated to tracepoints of modules that are coming
and going, simply copy the pointer to the module struct to the tracepoint
tp_module structure.

Also removed un-needed brackets around an if statement.

Link: http://lkml.kernel.org/r/20140408201705.4dad2c4a@gandalf.local.homeAcked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Register/unregister tracepoint probes with struct tracepoint pointer
rather than tracepoint name.

This change, which vastly simplifies tracepoint.c, has been proposed by
Steven Rostedt. It also removes 8.8kB (mostly of text) to the vmlinux
size.

From this point on, the tracers need to pass a struct tracepoint pointer
to probe register/unregister. A probe can now only be connected to a
tracepoint that exists. Moreover, tracers are responsible for
unregistering the probe before the module containing its associated
tracepoint is unloaded.

   text    data     bss     dec     hex filename
10443444        4282528 10391552        25117524        17f4354 vmlinux.orig
10434930        4282848 10391552        25109330        17f2352 vmlinux

Link: http://lkml.kernel.org/r/1396992381-23785-2-git-send-email-mathieu.desnoyers@efficios.com

CC: Ingo Molnar <mingo@kernel.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Frank Ch. Eigler <fche@redhat.com>
CC: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
[ SDR - fixed return val in void func in tracepoint_module_going() ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

nf_ct_gre_keymap_flush() removes a nf_ct_gre_keymap object from
net_gre->keymap_list and frees the object. But it doesn't clean
a reference on this object from ct_pptp_info->keymap[dir].
Then nf_ct_gre_keymap_destroy() may release the same object again.

So nf_ct_gre_keymap_flush() can be called only when we are sure that
when nf_ct_gre_keymap_destroy will not be called.

nf_ct_gre_keymap is created by nf_ct_gre_keymap_add() and the right way
to destroy it is to call nf_ct_gre_keymap_destroy().

This patch marks nf_ct_gre_keymap_flush() as static, so this patch can
break compilation of third party modules, which use
nf_ct_gre_keymap_flush. I'm not sure this is the right way to deprecate
this function.

[  226.540793] general protection fault: 0000 [#1] SMP
[  226.541750] Modules linked in: nf_nat_pptp nf_nat_proto_gre
nf_conntrack_pptp nf_conntrack_proto_gre ip_gre ip_tunnel gre
ppp_deflate bsd_comp ppp_async crc_ccitt ppp_generic slhc xt_nat
iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat
nf_conntrack veth tun bridge stp llc ppdev microcode joydev pcspkr
serio_raw virtio_console virtio_balloon floppy parport_pc parport
pvpanic i2c_piix4 virtio_net drm_kms_helper ttm ata_generic virtio_pci
virtio_ring virtio drm i2c_core pata_acpi [last unloaded: ip_tunnel]
[  226.541776] CPU: 0 PID: 49 Comm: kworker/u4:2 Not tainted 3.14.0-rc8+ #101
[  226.541776] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[  226.541776] Workqueue: netns cleanup_net
[  226.541776] task: ffff8800371e0000 ti: ffff88003730c000 task.ti: ffff88003730c000
[  226.541776] RIP: 0010:[<ffffffff81389ba9>]  [<ffffffff81389ba9>] __list_del_entry+0x29/0xd0
[  226.541776] RSP: 0018:ffff88003730dbd0  EFLAGS: 00010a83
[  226.541776] RAX: 6b6b6b6b6b6b6b6b RBX: ffff8800374e6c40 RCX: dead000000200200
[  226.541776] RDX: 6b6b6b6b6b6b6b6b RSI: ffff8800371e07d0 RDI: ffff8800374e6c40
[  226.541776] RBP: ffff88003730dbd0 R08: 0000000000000000 R09: 0000000000000000
[  226.541776] R10: 0000000000000001 R11: ffff88003730d92e R12: 0000000000000002
[  226.541776] R13: ffff88007a4c42d0 R14: ffff88007aef0000 R15: ffff880036cf0018
[  226.541776] FS:  0000000000000000(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000
[  226.541776] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  226.541776] CR2: 00007f07f643f7d0 CR3: 0000000036fd2000 CR4: 00000000000006f0
[  226.541776] Stack:
[  226.541776]  ffff88003730dbe8 ffffffff81389c5d ffff8800374ffbe4 ffff88003730dc28
[  226.541776]  ffffffffa0162a43 ffffffffa01627c5 ffff88007a4c42d0 ffff88007aef0000
[  226.541776]  ffffffffa01651c0 ffff88007a4c45e0 ffff88007aef0000 ffff88003730dc40
[  226.541776] Call Trace:
[  226.541776]  [<ffffffff81389c5d>] list_del+0xd/0x30
[  226.541776]  [<ffffffffa0162a43>] nf_ct_gre_keymap_destroy+0x283/0x2d0 [nf_conntrack_proto_gre]
[  226.541776]  [<ffffffffa01627c5>] ? nf_ct_gre_keymap_destroy+0x5/0x2d0 [nf_conntrack_proto_gre]
[  226.541776]  [<ffffffffa0162ab7>] gre_destroy+0x27/0x70 [nf_conntrack_proto_gre]
[  226.541776]  [<ffffffffa0117de3>] destroy_conntrack+0x83/0x200 [nf_conntrack]
[  226.541776]  [<ffffffffa0117d87>] ? destroy_conntrack+0x27/0x200 [nf_conntrack]
[  226.541776]  [<ffffffffa0117d60>] ? nf_conntrack_hash_check_insert+0x2e0/0x2e0 [nf_conntrack]
[  226.541776]  [<ffffffff81630142>] nf_conntrack_destroy+0x72/0x180
[  226.541776]  [<ffffffff816300d5>] ? nf_conntrack_destroy+0x5/0x180
[  226.541776]  [<ffffffffa011ef80>] ? kill_l3proto+0x20/0x20 [nf_conntrack]
[  226.541776]  [<ffffffffa011847e>] nf_ct_iterate_cleanup+0x14e/0x170 [nf_conntrack]
[  226.541776]  [<ffffffffa011f74b>] nf_ct_l4proto_pernet_unregister+0x5b/0x90 [nf_conntrack]
[  226.541776]  [<ffffffffa0162409>] proto_gre_net_exit+0x19/0x30 [nf_conntrack_proto_gre]
[  226.541776]  [<ffffffff815edf89>] ops_exit_list.isra.1+0x39/0x60
[  226.541776]  [<ffffffff815eecc0>] cleanup_net+0x100/0x1d0
[  226.541776]  [<ffffffff810a608a>] process_one_work+0x1ea/0x4f0
[  226.541776]  [<ffffffff810a6028>] ? process_one_work+0x188/0x4f0
[  226.541776]  [<ffffffff810a64ab>] worker_thread+0x11b/0x3a0
[  226.541776]  [<ffffffff810a6390>] ? process_one_work+0x4f0/0x4f0
[  226.541776]  [<ffffffff810af42d>] kthread+0xed/0x110
[  226.541776]  [<ffffffff8173d4dc>] ? _raw_spin_unlock_irq+0x2c/0x40
[  226.541776]  [<ffffffff810af340>] ? kthread_create_on_node+0x200/0x200
[  226.541776]  [<ffffffff8174747c>] ret_from_fork+0x7c/0xb0
[  226.541776]  [<ffffffff810af340>] ? kthread_create_on_node+0x200/0x200
[  226.541776] Code: 00 00 55 48 8b 17 48 b9 00 01 10 00 00 00 ad de
48 8b 47 08 48 89 e5 48 39 ca 74 29 48 b9 00 02 20 00 00 00 ad de 48
39 c8 74 7a <4c> 8b 00 4c 39 c7 75 53 4c 8b 42 08 4c 39 c7 75 2b 48 89
42 08
[  226.541776] RIP  [<ffffffff81389ba9>] __list_del_entry+0x29/0xd0
[  226.541776]  RSP <ffff88003730dbd0>
[  226.612193] ---[ end trace 985ae23ddfcc357c ]---

Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrey Vagin <avagin@openvz.org>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>