Move all OMAP4 PM errata initializations to centralized location in
omap4_pm_init_early. This allows for users to utilize the erratas
in various submodules as needed.
Reported-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NNishanth Menon <nm@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NKevin Hilman <khilman@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

The same workaround as ff999b8a
"ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX GIC ..."
need to be applied not only when system is booting, but when MPUSS hits
OSWR state through CPUIdle too. Without this WA the same issue is
reproduced now on boards PandaES and Tablet/Blaze with SOM OMAP4460
when CONFIG_CPU_IDLE is enabled.
After MPUSS has enterred OSWR and waken up:
- GIC distributor became disabled forever
- scheduling is not performed any more

Cc: Kevin Hilman <khilman@linaro.org>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Reported-by: NTaras Kondratiuk <taras.kondratiuk@linaro.org>
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NKevin Hilman <khilman@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Pull btrfs updates from Chris Mason:
 "This is a pretty big pull, and most of these changes have been
  floating in btrfs-next for a long time.  Filipe's properties work is a
  cool building block for inheriting attributes like compression down on
  a per inode basis.

  Jeff Mahoney kicked in code to export filesystem info into sysfs.

  Otherwise, lots of performance improvements, cleanups and bug fixes.

  Looks like there are still a few other small pending incrementals, but
  I wanted to get the bulk of this in first"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (149 commits)
  Btrfs: fix spin_unlock in check_ref_cleanup
  Btrfs: setup inode location during btrfs_init_inode_locked
  Btrfs: don't use ram_bytes for uncompressed inline items
  Btrfs: fix btrfs_search_slot_for_read backwards iteration
  Btrfs: do not export ulist functions
  Btrfs: rework ulist with list+rb_tree
  Btrfs: fix memory leaks on walking backrefs failure
  Btrfs: fix send file hole detection leading to data corruption
  Btrfs: add a reschedule point in btrfs_find_all_roots()
  Btrfs: make send's file extent item search more efficient
  Btrfs: fix to catch all errors when resolving indirect ref
  Btrfs: fix protection between walking backrefs and root deletion
  btrfs: fix warning while merging two adjacent extents
  Btrfs: fix infinite path build loops in incremental send
  btrfs: undo sysfs when open_ctree() fails
  Btrfs: fix snprintf usage by send's gen_unique_name
  btrfs: fix defrag 32-bit integer overflow
  btrfs: sysfs: list the NO_HOLES feature
  btrfs: sysfs: don't show reserved incompat feature
  btrfs: call permission checks earlier in ioctls and return EPERM
  ...

Pull ubifs updates from Artem Bityutskiy:

 - Improve the NOR erasure quirk - now it tries to do as little writes
   as possible, because the eraseblock may be in an "unstable" state and
   write operation sometimes causes NOR chip lock-ups.

 - Both UBI and UBIFS changes are now maintainer in one single tree,
   because the amount of changes dropped significantly.

* tag 'upstream-3.14-rc1' of git://git.infradead.org/linux-ubifs:
  UBI: avoid program operation on NOR flash after erasure interrupted
  MAINTAINERS: keep UBI and UBIFS stuff in the same tree
  UBI: fix error return code

Pull some further ceph acl cleanups from Sage Weil:
 "I do have a couple patches on top of what's in your tree, though, that
  clean up a couple duplicated lines in your fix and apply Christoph's
  cleanup"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: simplify ceph_{get,init}_acl
  ceph: remove duplicate declaration of ceph_setattr

 - ->get_acl only gets called after we checked for a cached ACL, so no
   need to call get_cached_acl again.
 - no need to check IS_POSIXACL in ->get_acl, without that it should
   never get set as all the callers that set it already have the check.
 - you should be able to use the full posix_acl_create in CEPH
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NSage Weil <sage@inktank.com>

Merge misc fixes from Andrew Morton:
 "A few hotfixes and various leftovers which were awaiting other merges.

  Mainly movement of zram into mm/"

* emailed patches fron Andrew Morton <akpm@linux-foundation.org>: (25 commits)
  memcg: fix mutex not unlocked on memcg_create_kmem_cache fail path
  Documentation/filesystems/vfs.txt: update file_operations documentation
  mm, oom: base root bonus on current usage
  mm: don't lose the SOFT_DIRTY flag on mprotect
  mm/slub.c: fix page->_count corruption (again)
  mm/mempolicy.c: fix mempolicy printing in numa_maps
  zram: remove zram->lock in read path and change it with mutex
  zram: remove workqueue for freeing removed pending slot
  zram: introduce zram->tb_lock
  zram: use atomic operation for stat
  zram: remove unnecessary free
  zram: delay pending free request in read path
  zram: fix race between reset and flushing pending work
  zsmalloc: add maintainers
  zram: add zram maintainers
  zsmalloc: add copyright
  zram: add copyright
  zram: remove old private project comment
  zram: promote zram from staging
  zsmalloc: move it under mm
  ...

The x32 case for the recvmsg() timout handling is broken:

  asmlinkage long compat_sys_recvmmsg(int fd, struct compat_mmsghdr __user *mmsg,
                                      unsigned int vlen, unsigned int flags,
                                      struct compat_timespec __user *timeout)
  {
          int datagrams;
          struct timespec ktspec;

          if (flags & MSG_CMSG_COMPAT)
                  return -EINVAL;

          if (COMPAT_USE_64BIT_TIME)
                  return __sys_recvmmsg(fd, (struct mmsghdr __user *)mmsg, vlen,
                                        flags | MSG_CMSG_COMPAT,
                                        (struct timespec *) timeout);
          ...

The timeout pointer parameter is provided by userland (hence the __user
annotation) but for x32 syscalls it's simply cast to a kernel pointer
and is passed to __sys_recvmmsg which will eventually directly
dereference it for both reading and writing.  Other callers to
__sys_recvmmsg properly copy from userland to the kernel first.

The bug was introduced by commit ee4fa23c ("compat: Use
COMPAT_USE_64BIT_TIME in net/compat.c") and should affect all kernels
since 3.4 (and perhaps vendor kernels if they backported x32 support
along with this code).

Note that CONFIG_X86_X32_ABI gets enabled at build time and only if
CONFIG_X86_X32 is enabled and ld can build x32 executables.

Other uses of COMPAT_USE_64BIT_TIME seem fine.

This addresses CVE-2014-0038.
Signed-off-by: NPaX Team <pageexec@freemail.hu>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org> # v3.4+
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull x86 asmlinkage (LTO) changes from Peter Anvin:
 "This patchset adds more infrastructure for link time optimization
  (LTO).

  This patchset was pulled into my tree late because of a
  miscommunication (part of the patchset was picked up by other
  maintainers).  However, the patchset is strictly build-related and
  seems to be okay in testing"

* 'x86-asmlinkage-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, asmlinkage, xen: Fix type of NMI
  x86, asmlinkage, xen, kvm: Make {xen,kvm}_lock_spinning global and visible
  x86: Use inline assembler instead of global register variable to get sp
  x86, asmlinkage, paravirt: Make paravirt thunks global
  x86, asmlinkage, paravirt: Don't rely on local assembler labels
  x86, asmlinkage, lguest: Fix C functions used by inline assembler

Pull x86 build bits from Peter Anvin:
 "Various build-related minor bits.

  Most of this is work by David Woodhouse to be able to compile the
  early boot code with clang/llvm; we have also managed to push an
  actual -m16 option into gcc 4.9 so this makes us use that option if
  available instead of hacking it.

  The balance is a patch from Michael Davidson to the relocs program to
  help manual debugging.

  None of these should change the actual compiled binary with currently
  released compilers"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, build: Build 16-bit code with -m16 where possible
  x86, boot: Fix word-size assumptions in has_eflag() inline asm
  x86, boot: Use __attribute__((used)) to ensure videocard structs are emitted
  x86: Remove duplication of 16-bit CFLAGS
  x86, relocs: Add manual debug mode

Pull ARM SoC late changes from Kevin Hilman:
 "These are changes that arrived a little late but were considered
  self-contained enough to still go in for v3.14.

  They are all device tree updtes this time around, and mainly for
  Broadcom SoCs"

* tag 'late-dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: moxart: move fixed rate clock child node to board level dts
  clk: bcm281xx: define kona clock binding
  ARM: dts: add usb udc support to bcm281xx
  ARM: dts: Specify clocks for timer on bcm11351
  Documentation: dt: kona-timer: Add clocks property
  ARM: dts: Specify clocks for SDHCIs on bcm11351
  Documentation: dt: kona-sdhci: Add clocks property
  ARM: dts: Specify clocks for UARTs on bcm11351
  ARM: dts: bcm281xx: Add i2c busses
  ARM: dts: Declare clocks as fixed on bcm11351
  ARM: dts: bcm28155-ap: Enable all the i2c busses

Pull MIPS updates from Ralf Baechle:
 "The most notable new addition inside this pull request is the support
  for MIPS's latest and greatest core called "inter/proAptiv".  The
  patch series describes this core as follows.

    "The interAptiv is a power-efficient multi-core microprocessor
     for use in system-on-chip (SoC) applications. The interAptiv combines
     a multi-threading pipeline with a coherence manager to deliver improved
     computational throughput and power efficiency. The interAptiv can
     contain one to four MIPS32R3 interAptiv cores, system level
     coherence manager with L2 cache, optional coherent I/O port,
     and optional floating point unit."

  The platform specific patches touch all 3 Broadcom families.  It adds
  support for the new Broadcom/Netlogix XLP9xx Soc, building a common
  BCM63XX SMP kernel for all BCM63XX SoCs regardless of core type/count
  and full gpio button/led descriptions for BCM47xx.

  The rest of the series are cleanups and bug fixes that are MIPS
  generic and consist largely of changes that Imgtec/MIPS had published
  in their linux-mti-3.10.git stable tree.  Random other cleanups and
  patches preparing code to be merged in 3.15"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits)
  mips: select ARCH_MIGHT_HAVE_PC_SERIO
  mips: delete non-required instances of include <linux/init.h>
  MIPS: KVM: remove shadow_tlb code
  MIPS: KVM: use common EHINV aware UNIQUE_ENTRYHI
  mips/ide: flush dcache also if icache does not snoop dcache
  MIPS: BCM47XX: fix position of cpu_wait disabling
  MIPS: BCM63XX: select correct MIPS_L1_CACHE_SHIFT value
  MIPS: update MIPS_L1_CACHE_SHIFT based on MIPS_L1_CACHE_SHIFT_<N>
  MIPS: introduce MIPS_L1_CACHE_SHIFT_<N>
  MIPS: ZBOOT: gather string functions into string.c
  arch/mips/pci: don't check resource with devm_ioremap_resource
  arch/mips/lantiq/xway: don't check resource with devm_ioremap_resource
  bcma: gpio: don't cast u32 to unsigned long
  ssb: gpio: add own IRQ domain
  MIPS: BCM47XX: fix sparse warnings in board.c
  MIPS: BCM47XX: add board detection for Linksys WRT54GS V1
  MIPS: BCM47XX: fix detection for some boards
  MIPS: BCM47XX: Enable buttons support on SSB
  MIPS: BCM47XX: Convert WNDR4500 to new syntax
  MIPS: BCM47XX: Use "timer" trigger for status LEDs
  ...

Pull OpenRISC updates from Jonas Bonn:
 "The interesting change here is a rework of the OpenRISC signal
  handling to make it more like other architectures in the hopes that
  this makes it easier for others to comment on and understand.  This
  rework fixes some real bugs, like the fact that syscall restart did
  not work reliably"

* tag 'for-3.14' of git://openrisc.net/~jonas/linux:
  openrisc: Use get_signal() signal_setup_done()
  openrisc: Rework signal handling

Pull more powerpc bits from Ben Herrenschmidt:
 "Here are a few more powerpc bits for this merge window.  The bulk is
  made of two pull requests from Scott and Anatolij that I had missed
  previously (they arrived while I was away).  Since both their branches
  are in -next independently, and the content has been around for a
  little while, they can still go in.

  The rest is mostly bug and regression fixes, a small series of
  cleanups to our pseries cpuidle code (including moving it to the right
  place), and one new cpuidle bakend for the powernv platform.  I also
  wired up the new sched_attr syscalls"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (37 commits)
  powerpc: Wire up sched_setattr and sched_getattr syscalls
  powerpc/hugetlb: Replace __get_cpu_var with get_cpu_var
  powerpc: Make sure "cache" directory is removed when offlining cpu
  powerpc/mm: Fix mmap errno when MAP_FIXED is set and mapping exceeds the allowed address space
  powerpc/powernv/cpuidle: Back-end cpuidle driver for powernv platform.
  powerpc/pseries/cpuidle: smt-snooze-delay cleanup.
  powerpc/pseries/cpuidle: Remove MAX_IDLE_STATE macro.
  powerpc/pseries/cpuidle: Make cpuidle-pseries backend driver a non-module.
  powerpc/pseries/cpuidle: Use cpuidle_register() for initialisation.
  powerpc/pseries/cpuidle: Move processor_idle.c to drivers/cpuidle.
  powerpc: Fix 32-bit frames for signals delivered when transactional
  powerpc/iommu: Fix initialisation of DART iommu table
  powerpc/numa: Fix decimal permissions
  powerpc/mm: Fix compile error of pgtable-ppc64.h
  powerpc: Fix hw breakpoints on !HAVE_HW_BREAKPOINT configurations
  clk: corenet: Adds the clock binding
  powerpc/booke64: Guard e6500 tlb handler with CONFIG_PPC_FSL_BOOK3E
  powerpc/512x: dts: add MPC5125 clock specs
  powerpc/512x: clk: support MPC5121/5123/5125 SoC variants
  powerpc/512x: clk: enforce even SDHC divider values
  ...

Pull __TIME__/__DATE__ removal from Michal Marek:
 "This series by Josh finishes the removal of __DATE__ and __TIME__ from
  the kernel.  The last patch adds -Werror=date-time to KBUILD_CFLAGS to
  stop these from reappearing.

  Part of the series went through Greg's trees during this merge window,
  which is why this pull request is not based on v3.13-rc1"

* 'drop-time' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  Makefile: Build with -Werror=date-time if the compiler supports it
  x86: math-emu: Drop already-disabled print of build date
  net: wireless: brcm80211: Drop debug version with build date/time
  mtd: denali: Drop print of build date/time

Pull kbuild changes from Michal Marek:
 - fix make -s detection with make-4.0
 - fix for scripts/setlocalversion when the kernel repository is a
   submodule
 - do not hardcode ';' in macros that expand to assembler code, as some
   architectures' assemblers use a different character for newline
 - Fix passing --gdwarf-2 to the assembler

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  frv: Remove redundant debugging info flag
  mn10300: Remove redundant debugging info flag
  kbuild: Fix debugging info generation for .S files
  arch: use ASM_NL instead of ';' for assembler new line character in the macro
  kbuild: Fix silent builds with make-4
  Fix detectition of kernel git repository in setlocalversion script [take #2]

Commit 842e2873 ("memcg: get rid of kmem_cache_dup()") introduced a
mutex for memcg_create_kmem_cache() to protect the tmp_name buffer that
holds the memcg name.  It failed to unlock the mutex if this buffer
could not be allocated.

This patch fixes the issue by appropriately unlocking the mutex if the
allocation fails.
Signed-off-by: NVladimir Davydov <vdavydov@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Glauber Costa <glommer@parallels.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

->readv, ->writev and ->sendfile have been removed while ->show_fdinfo
has been added. The documentation should reflect this.
Signed-off-by: NRichard Yao <ryao@gentoo.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A 3% of system memory bonus is sometimes too excessive in comparison to
other processes.

With commit a63d83f4 ("oom: badness heuristic rewrite"), the OOM
killer tries to avoid killing privileged tasks by subtracting 3% of
overall memory (system or cgroup) from their per-task consumption.  But
as a result, all root tasks that consume less than 3% of overall memory
are considered equal, and so it only takes 33+ privileged tasks pushing
the system out of memory for the OOM killer to do something stupid and
kill dhclient or other root-owned processes.  For example, on a 32G
machine it can't tell the difference between the 1M agetty and the 10G
fork bomb member.

The changelog describes this 3% boost as the equivalent to the global
overcommit limit being 3% higher for privileged tasks, but this is not
the same as discounting 3% of overall memory from _every privileged task
individually_ during OOM selection.

Replace the 3% of system memory bonus with a 3% of current memory usage
bonus.

By giving root tasks a bonus that is proportional to their actual size,
they remain comparable even when relatively small.  In the example
above, the OOM killer will discount the 1M agetty's 256 badness points
down to 179, and the 10G fork bomb's 262144 points down to 183500 points
and make the right choice, instead of discounting both to 0 and killing
agetty because it's first in the task list.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Reported-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The SOFT_DIRTY bit shows that the content of memory was changed after a
defined point in the past.  mprotect() doesn't change the content of
memory, so it must not change the SOFT_DIRTY bit.

This bug causes a malfunction: on the first iteration all pages are
dumped.  On other iterations only pages with the SOFT_DIRTY bit are
dumped.  So if the SOFT_DIRTY bit is cleared from a page by mistake, the
page is not dumped and its content will be restored incorrectly.

This patch does nothing with _PAGE_SWP_SOFT_DIRTY, becase pte_modify()
is called only for present pages.

Fixes commit 0f8975ec ("mm: soft-dirty bits for user memory changes
tracking").
Signed-off-by: NAndrey Vagin <avagin@openvz.org>
Acked-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit abca7c49 ("mm: fix slab->page _count corruption when using
slub") notes that we can not _set_ a page->counters directly, except
when using a real double-cmpxchg.  Doing so can lose updates to
->_count.

That is an absolute rule:

        You may not *set* page->counters except via a cmpxchg.

Commit abca7c49 fixed this for the folks who have the slub
cmpxchg_double code turned off at compile time, but it left the bad case
alone.  It can still be reached, and the same bug triggered in two
cases:

1. Turning on slub debugging at runtime, which is available on
   the distro kernels that I looked at.
2. On 64-bit CPUs with no CMPXCHG16B (some early AMD x86-64
   cpus, evidently)

There are at least 3 ways we could fix this:

1. Take all of the exising calls to cmpxchg_double_slab() and
   __cmpxchg_double_slab() and convert them to take an old, new
   and target 'struct page'.
2. Do (1), but with the newly-introduced 'slub_data'.
3. Do some magic inside the two cmpxchg...slab() functions to
   pull the counters out of new_counters and only set those
   fields in page->{inuse,frozen,objects}.

I've done (2) as well, but it's a bunch more code.  This patch is an
attempt at (3).  This was the most straightforward and foolproof way
that I could think to do this.

This would also technically allow us to get rid of the ugly

#if defined(CONFIG_HAVE_CMPXCHG_DOUBLE) && \
       defined(CONFIG_HAVE_ALIGNED_STRUCT_PAGE)

in 'struct page', but leaving it alone has the added benefit that
'counters' stays 'unsigned' instead of 'unsigned long', so all the
copies that the slub code does stay a bit smaller.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As a result of commit 5606e387 ("mm: numa: Migrate on reference
policy"), /proc/<pid>/numa_maps prints the mempolicy for any <pid> as
"prefer:N" for the local node, N, of the process reading the file.

This should only be printed when the mempolicy of <pid> is
MPOL_PREFERRED for node N.

If the process is actually only using the default mempolicy for local
node allocation, make sure "default" is printed as expected.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Reported-by: NRobert Lippert <rlippert@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>	[3.7+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Finally, we separated zram->lock dependency from 32bit stat/ table
handling so there is no reason to use rw_semaphore between read and
write path so this patch removes the lock from read path totally and
changes rw_semaphore with mutex.  So, we could do

old:

  read-read: OK
  read-write: NO
  write-write: NO

Now:

  read-read: OK
  read-write: OK
  write-write: NO

The below data proves mixed workload performs well 11 times and there is
also enhance on write-write path because current rw-semaphore doesn't
support SPIN_ON_OWNER.  It's side effect but anyway good thing for us.

Write-related tests perform better (from 61% to 1058%) but read path has
good/bad(from -2.22% to 1.45%) but they are all marginal within stddev.

  CPU 12
  iozone -t -T -l 12 -u 12 -r 16K -s 60M -I +Z -V 0

  ==Initial write                ==Initial write
  records: 10                    records: 10
  avg:  516189.16                avg:  839907.96
  std:   22486.53 (4.36%)        std:   47902.17 (5.70%)
  max:  546970.60                max:  909910.35
  min:  481131.54                min:  751148.38
  ==Rewrite                      ==Rewrite
  records: 10                    records: 10
  avg:  509527.98                avg: 1050156.37
  std:   45799.94 (8.99%)        std:   40695.44 (3.88%)
  max:  611574.27                max: 1111929.26
  min:  443679.95                min:  980409.62
  ==Read                         ==Read
  records: 10                    records: 10
  avg: 4408624.17                avg: 4472546.76
  std:  281152.61 (6.38%)        std:  163662.78 (3.66%)
  max: 4867888.66                max: 4727351.03
  min: 4058347.69                min: 4126520.88
  ==Re-read                      ==Re-read
  records: 10                    records: 10
  avg: 4462147.53                avg: 4363257.75
  std:  283546.11 (6.35%)        std:  247292.63 (5.67%)
  max: 4912894.44                max: 4677241.75
  min: 4131386.50                min: 4035235.84
  ==Reverse Read                 ==Reverse Read
  records: 10                    records: 10
  avg: 4565865.97                avg: 4485818.08
  std:  313395.63 (6.86%)        std:  248470.10 (5.54%)
  max: 5232749.16                max: 4789749.94
  min: 4185809.62                min: 3963081.34
  ==Stride read                  ==Stride read
  records: 10                    records: 10
  avg: 4515981.80                avg: 4418806.01
  std:  211192.32 (4.68%)        std:  212837.97 (4.82%)
  max: 4889287.28                max: 4686967.22
  min: 4210362.00                min: 4083041.84
  ==Random read                  ==Random read
  records: 10                    records: 10
  avg: 4410525.23                avg: 4387093.18
  std:  236693.22 (5.37%)        std:  235285.23 (5.36%)
  max: 4713698.47                max: 4669760.62
  min: 4057163.62                min: 3952002.16
  ==Mixed workload               ==Mixed workload
  records: 10                    records: 10
  avg:  243234.25                avg: 2818677.27
  std:   28505.07 (11.72%)       std:  195569.70 (6.94%)
  max:  288905.23                max: 3126478.11
  min:  212473.16                min: 2484150.69
  ==Random write                 ==Random write
  records: 10                    records: 10
  avg:  555887.07                avg: 1053057.79
  std:   70841.98 (12.74%)       std:   35195.36 (3.34%)
  max:  683188.28                max: 1096125.73
  min:  437299.57                min:  992481.93
  ==Pwrite                       ==Pwrite
  records: 10                    records: 10
  avg:  501745.93                avg:  810363.09
  std:   16373.54 (3.26%)        std:   19245.01 (2.37%)
  max:  518724.52                max:  833359.70
  min:  464208.73                min:  765501.87
  ==Pread                        ==Pread
  records: 10                    records: 10
  avg: 4539894.60                avg: 4457680.58
  std:  197094.66 (4.34%)        std:  188965.60 (4.24%)
  max: 4877170.38                max: 4689905.53
  min: 4226326.03                min: 4095739.72
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Tested-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit a0c516cb ("zram: don't grab mutex in zram_slot_free_noity")
introduced free request pending code to avoid scheduling by mutex under
spinlock and it was a mess which made code lenghty and increased
overhead.

Now, we don't need zram->lock any more to free slot so this patch
reverts it and then, tb_lock should protect it.
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Tested-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, the zram table is protected by zram->lock but it's rather
coarse-grained lock and it makes hard for scalibility.

Let's use own rwlock instead of depending on zram->lock.  This patch
adds new locking so obviously, it would make slow but this patch is just
prepartion for removing coarse-grained rw_semaphore(ie, zram->lock)
which is hurdle about zram scalability.

Final patch in this patchset series will remove the lock from read-path
and change rw_semaphore with mutex in write path.  With bonus, we could
drop pending slot free mess in next patch.
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Tested-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some of fields in zram->stats are protected by zram->lock which is
rather coarse-grained so let's use atomic operation without explict
locking.

This patch is ready for removing dependency of zram->lock in read path
which is very coarse-grained rw_semaphore.  Of course, this patch adds
new atomic operation so it might make slow but my 12CPU test couldn't
spot any regression.  All gain/lose is marginal within stddev.

  iozone -t -T -l 12 -u 12 -r 16K -s 60M -I +Z -V 0

  ==Initial write                ==Initial write
  records: 50                    records: 50
  avg:  412875.17                avg:  415638.23
  std:   38543.12 (9.34%)        std:   36601.11 (8.81%)
  max:  521262.03                max:  502976.72
  min:  343263.13                min:  351389.12
  ==Rewrite                      ==Rewrite
  records: 50                    records: 50
  avg:  416640.34                avg:  397914.33
  std:   60798.92 (14.59%)       std:   46150.42 (11.60%)
  max:  543057.07                max:  522669.17
  min:  304071.67                min:  316588.77
  ==Read                         ==Read
  records: 50                    records: 50
  avg: 4147338.63                avg: 4070736.51
  std:  179333.25 (4.32%)        std:  223499.89 (5.49%)
  max: 4459295.28                max: 4539514.44
  min: 3753057.53                min: 3444686.31
  ==Re-read                      ==Re-read
  records: 50                    records: 50
  avg: 4096706.71                avg: 4117218.57
  std:  229735.04 (5.61%)        std:  171676.25 (4.17%)
  max: 4430012.09                max: 4459263.94
  min: 2987217.80                min: 3666904.28
  ==Reverse Read                 ==Reverse Read
  records: 50                    records: 50
  avg: 4062763.83                avg: 4078508.32
  std:  186208.46 (4.58%)        std:  172684.34 (4.23%)
  max: 4401358.78                max: 4424757.22
  min: 3381625.00                min: 3679359.94
  ==Stride read                  ==Stride read
  records: 50                    records: 50
  avg: 4094933.49                avg: 4082170.22
  std:  185710.52 (4.54%)        std:  196346.68 (4.81%)
  max: 4478241.25                max: 4460060.97
  min: 3732593.23                min: 3584125.78
  ==Random read                  ==Random read
  records: 50                    records: 50
  avg: 4031070.04                avg: 4074847.49
  std:  192065.51 (4.76%)        std:  206911.33 (5.08%)
  max: 4356931.16                max: 4399442.56
  min: 3481619.62                min: 3548372.44
  ==Mixed workload               ==Mixed workload
  records: 50                    records: 50
  avg:  149925.73                avg:  149675.54
  std:    7701.26 (5.14%)        std:    6902.09 (4.61%)
  max:  191301.56                max:  175162.05
  min:  133566.28                min:  137762.87
  ==Random write                 ==Random write
  records: 50                    records: 50
  avg:  404050.11                avg:  393021.47
  std:   58887.57 (14.57%)       std:   42813.70 (10.89%)
  max:  601798.09                max:  524533.43
  min:  325176.99                min:  313255.34
  ==Pwrite                       ==Pwrite
  records: 50                    records: 50
  avg:  411217.70                avg:  411237.96
  std:   43114.99 (10.48%)       std:   33136.29 (8.06%)
  max:  530766.79                max:  471899.76
  min:  320786.84                min:  317906.94
  ==Pread                        ==Pread
  records: 50                    records: 50
  avg: 4154908.65                avg: 4087121.92
  std:  151272.08 (3.64%)        std:  219505.04 (5.37%)
  max: 4459478.12                max: 4435857.38
  min: 3730512.41                min: 3101101.67
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Tested-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit a0c516cb ("zram: don't grab mutex in zram_slot_free_noity")
introduced pending zram slot free in zram's write path in case of
missing slot free by memory allocation failure in zram_slot_free_notify
but it is not necessary because we have already freed the slot right
before overwriting.
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Tested-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Sergey reported we don't need to handle pending free request every I/O
so that this patch removes it in read path while we remain it in write
path.

Let's consider below example.

Swap subsystem ask to zram "A" block free by swap_slot_free_notify but
zram had been pended it without real freeing.  Swap subsystem allocates
"A" block for new data but request pended for a long time just handled
and zram blindly free new data on the "A" block.  :(

That's why we couldn't remove handle pending free request right before
zram-write.
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Reported-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Tested-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Dan and Sergey reported that there is a racy between reset and flushing
of pending work so that it could make oops by freeing zram->meta in
reset while zram_slot_free can access zram->meta if new request is
adding during the race window.

This patch moves flush after taking init_lock so it prevents new request
so that it closes the race.
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Tested-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

tAdd adds maintainer information for zsmalloc into the MAINTAINERS file.
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add maintainer information for zram into the MAINTAINERS file.
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add my copyright to the zsmalloc source code which I maintain.
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add my copyright to the zram source code which I maintain.
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the old private compcache project address so upcoming patches
should be sent to LKML because we Linux kernel community will take care.
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Zram has lived in staging for a LONG LONG time and have been
fixed/improved by many contributors so code is clean and stable now.  Of
course, there are lots of product using zram in real practice.

The major TV companys have used zram as swap since two years ago and
recently our production team released android smart phone with zram
which is used as swap, too and recently Android Kitkat start to use zram
for small memory smart phone.  And there was a report Google released
their ChromeOS with zram, too and cyanogenmod have been used zram long
time ago.  And I heard some disto have used zram block device for tmpfs.
In addition, I saw many report from many other peoples.  For example,
Lubuntu start to use it.

The benefit of zram is very clear.  With my experience, one of the
benefit was to remove jitter of video application with backgroud memory
pressure.  It would be effect of efficient memory usage by compression
but more issue is whether swap is there or not in the system.  Recent
mobile platforms have used JAVA so there are many anonymous pages.  But
embedded system normally are reluctant to use eMMC or SDCard as swap
because there is wear-leveling and latency issues so if we do not use
swap, it means we can't reclaim anoymous pages and at last, we could
encounter OOM kill.  :(

Although we have real storage as swap, it was a problem, too.  Because
it sometime ends up making system very unresponsible caused by slow swap
storage performance.

Quote from Luigi on Google
 "Since Chrome OS was mentioned: the main reason why we don't use swap
  to a disk (rotating or SSD) is because it doesn't degrade gracefully
  and leads to a bad interactive experience.  Generally we prefer to
  manage RAM at a higher level, by transparently killing and restarting
  processes.  But we noticed that zram is fast enough to be competitive
  with the latter, and it lets us make more efficient use of the
  available RAM.  " and he announced.
http://www.spinics.net/lists/linux-mm/msg57717.html

Other uses case is to use zram for block device.  Zram is block device
so anyone can format the block device and mount on it so some guys on
the internet start zram as /var/tmp.
http://forums.gentoo.org/viewtopic-t-838198-start-0.html

Let's promote zram and enhance/maintain it instead of removing.
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: NNitin Gupta <ngupta@vflare.org>
Acked-by: NPekka Enberg <penberg@kernel.org>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch moves zsmalloc under mm directory.

Before that, description will explain why we have needed custom
allocator.

Zsmalloc is a new slab-based memory allocator for storing compressed
pages.  It is designed for low fragmentation and high allocation success
rate on large object, but <= PAGE_SIZE allocations.

zsmalloc differs from the kernel slab allocator in two primary ways to
achieve these design goals.

zsmalloc never requires high order page allocations to back slabs, or
"size classes" in zsmalloc terms.  Instead it allows multiple
single-order pages to be stitched together into a "zspage" which backs
the slab.  This allows for higher allocation success rate under memory
pressure.

Also, zsmalloc allows objects to span page boundaries within the zspage.
This allows for lower fragmentation than could be had with the kernel
slab allocator for objects between PAGE_SIZE/2 and PAGE_SIZE.  With the
kernel slab allocator, if a page compresses to 60% of it original size,
the memory savings gained through compression is lost in fragmentation
because another object of the same size can't be stored in the leftover
space.

This ability to span pages results in zsmalloc allocations not being
directly addressable by the user.  The user is given an
non-dereferencable handle in response to an allocation request.  That
handle must be mapped, using zs_map_object(), which returns a pointer to
the mapped region that can be used.  The mapping is necessary since the
object data may reside in two different noncontigious pages.

The zsmalloc fulfills the allocation needs for zram perfectly

[sjenning@linux.vnet.ibm.com: borrow Seth's quote]
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NNitin Gupta <ngupta@vflare.org>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After commit 9a46ad6d ("smp: make smp_call_function_many() use logic
similar to smp_call_function_single()"), cfd->cpumask is accessed only
in smp_call_function_many().  So there is no more need to copy it into
cfd->cpumask_ipi before putting csd into the list.  The cpumask_ipi
field is obsolete and can be removed.
Signed-off-by: NRoman Gushchin <klamm@yandex-team.ru>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Wang YanQing <udknight@gmail.com>
Cc: Xie XiuQi <xiexiuqi@huawei.com>
Cc: Shaohua Li <shli@fusionio.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make smp_call_function_single and friends more efficient by using a
lockless list.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is required to call put_device() if device_register() fails, so that
we give up the last reference to the device.  Calling put_device allows
for mdiobus_release to be executed, kfreeing the bus.
Signed-off-by: NLevente Kurusa <levex@linux.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: David Daney <david.daney@cavium.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently we kfree the container of the device which failed to register.
This is wrong as the last reference is not given up with a put_device
call.  Also, now that we have put_device() callen, we no longer need the
kfree as the new_ld->dev.release function will take care of kfreeing the
associated memory.
Signed-off-by: NLevente Kurusa <levex@linux.com>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>