It is a 3-Port 10/100 Ethernet Switch with 1588v2 PTP.
Signed-off-by: NRazvan Stefanescu <razvan.stefanescu@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Igor Russkikh says:

====================
net: aquantia: fixes on vlan filters and other conditions

Here is a set of various bug fixes related to vlan filter offload and
two other rare cases.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On embedded environments with hard memory limits it is a normal although
rare case when skb can't be allocated on rx part under high traffic.

In such OOM cases napi_complete_done() was not called.
So the napi object became in an invalid state like it is "scheduled".
Kernel do not re-schedules the poll of that napi object.

Consequently, kernel can not remove that object the system hangs on
`ifconfig down` waiting for a poll.

We are fixing this by gracefully closing napi poll routine with correct
invocation of napi_complete_done.

This was reproduced with artificially failing the allocation of skb to
simulate an "out of memory" error case and check that traffic does
not get stuck.

Fixes: 970a2e98 ("net: ethernet: aquantia: Vector operations")
Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: NDmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Declaring threaded irq handler should also indicate the irq is
oneshot. It is oneshot indeed, because HW implements irq automasking
on trigger.

Not declaring this causes some kernel configurations to fail
on interface up, because request_threaded_irq returned an err code.

The issue was originally hidden on normal x86_64 configuration with
latest kernel, because depending on interrupt controller, irq driver
added ONESHOT flag on its own.

Issue was observed on older kernels (4.14) where no such logic exists.

Fixes: 4c83f170 ("net: aquantia: link status irq handling")
Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com>
Reported-by: NMichael Symolkin <Michael.Symolkin@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case of device reconfiguration the driver may reset the device invisible
for other modules, vlan module in particular. So vlans will not be
removed&created and vlan filters will not be configured in the device.
The patch reapplies the vlan filters at device start.

Fixes: 7975d2af ("net: aquantia: add support of rx-vlan-filter offload")
Signed-off-by: NDmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix a limit condition of vlans on the interface before setting vlan
promiscuous mode

Fixes: 48dd73d0 ("net: aquantia: fix vlans not working over bridged network")
Signed-off-by: NDmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Due to absence of checking against the rx flow rule when vlan 0 is being
removed, the other rule could be removed instead of the rule with vlan 0

Fixes: 7975d2af ("net: aquantia: add support of rx-vlan-filter offload")
Signed-off-by: NDmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Vladimir Oltean says:

====================
Fix issues in tc-taprio and tc-cbs

This series fixes one panic and one WARN_ON found in the tc-taprio
qdisc, while trying to apply it:

- On an interface which is not multi-queue
- On an interface which has no carrier

The tc-cbs was also visually found to suffer of the same issue as
tc-taprio, and the fix was only compile-tested in that case.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The discussion to be made is absolutely the same as in the case of
previous patch ("taprio: Set default link speed to 10 Mbps in
taprio_set_picos_per_byte"). Nothing is lost when setting a default.

Cc: Leandro Dorileo <leandro.maciel.dorileo@intel.com>
Fixes: e0a7683d ("net/sched: cbs: fix port_rate miscalculation")
Acked-by: NVinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: NVladimir Oltean <olteanv@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The taprio budget needs to be adapted at runtime according to interface
link speed. But that handling is problematic.

For one thing, installing a qdisc on an interface that doesn't have
carrier is not illegal. But taprio prints the following stack trace:

[   31.851373] ------------[ cut here ]------------
[   31.856024] WARNING: CPU: 1 PID: 207 at net/sched/sch_taprio.c:481 taprio_dequeue+0x1a8/0x2d4
[   31.864566] taprio: dequeue() called with unknown picos per byte.
[   31.864570] Modules linked in:
[   31.873701] CPU: 1 PID: 207 Comm: tc Not tainted 5.3.0-rc5-01199-g8838fe023cd6 #1689
[   31.881398] Hardware name: Freescale LS1021A
[   31.885661] [<c03133a4>] (unwind_backtrace) from [<c030d8cc>] (show_stack+0x10/0x14)
[   31.893368] [<c030d8cc>] (show_stack) from [<c10ac958>] (dump_stack+0xb4/0xc8)
[   31.900555] [<c10ac958>] (dump_stack) from [<c0349d04>] (__warn+0xe0/0xf8)
[   31.907395] [<c0349d04>] (__warn) from [<c0349d64>] (warn_slowpath_fmt+0x48/0x6c)
[   31.914841] [<c0349d64>] (warn_slowpath_fmt) from [<c0f38db4>] (taprio_dequeue+0x1a8/0x2d4)
[   31.923150] [<c0f38db4>] (taprio_dequeue) from [<c0f227b0>] (__qdisc_run+0x90/0x61c)
[   31.930856] [<c0f227b0>] (__qdisc_run) from [<c0ec82ac>] (net_tx_action+0x12c/0x2bc)
[   31.938560] [<c0ec82ac>] (net_tx_action) from [<c0302298>] (__do_softirq+0x130/0x3c8)
[   31.946350] [<c0302298>] (__do_softirq) from [<c03502a0>] (irq_exit+0xbc/0xd8)
[   31.953536] [<c03502a0>] (irq_exit) from [<c03a4808>] (__handle_domain_irq+0x60/0xb4)
[   31.961328] [<c03a4808>] (__handle_domain_irq) from [<c0754478>] (gic_handle_irq+0x58/0x9c)
[   31.969638] [<c0754478>] (gic_handle_irq) from [<c0301a8c>] (__irq_svc+0x6c/0x90)
[   31.977076] Exception stack(0xe8167b20 to 0xe8167b68)
[   31.982100] 7b20: e9d4bd80 00000cc0 000000cf 00000000 e9d4bd80 c1f38958 00000cc0 c1f38960
[   31.990234] 7b40: 00000001 000000cf 00000004 e9dc0800 00000000 e8167b70 c0f478ec c0f46d94
[   31.998363] 7b60: 60070013 ffffffff
[   32.001833] [<c0301a8c>] (__irq_svc) from [<c0f46d94>] (netlink_trim+0x18/0xd8)
[   32.009104] [<c0f46d94>] (netlink_trim) from [<c0f478ec>] (netlink_broadcast_filtered+0x34/0x414)
[   32.017930] [<c0f478ec>] (netlink_broadcast_filtered) from [<c0f47cec>] (netlink_broadcast+0x20/0x28)
[   32.027102] [<c0f47cec>] (netlink_broadcast) from [<c0eea378>] (rtnetlink_send+0x34/0x88)
[   32.035238] [<c0eea378>] (rtnetlink_send) from [<c0f25890>] (notify_and_destroy+0x2c/0x44)
[   32.043461] [<c0f25890>] (notify_and_destroy) from [<c0f25e08>] (qdisc_graft+0x398/0x470)
[   32.051595] [<c0f25e08>] (qdisc_graft) from [<c0f27a00>] (tc_modify_qdisc+0x3a4/0x724)
[   32.059470] [<c0f27a00>] (tc_modify_qdisc) from [<c0ee4c84>] (rtnetlink_rcv_msg+0x260/0x2ec)
[   32.067864] [<c0ee4c84>] (rtnetlink_rcv_msg) from [<c0f4a988>] (netlink_rcv_skb+0xb8/0x110)
[   32.076172] [<c0f4a988>] (netlink_rcv_skb) from [<c0f4a170>] (netlink_unicast+0x1b4/0x22c)
[   32.084392] [<c0f4a170>] (netlink_unicast) from [<c0f4a5e4>] (netlink_sendmsg+0x33c/0x380)
[   32.092614] [<c0f4a5e4>] (netlink_sendmsg) from [<c0ea9f40>] (sock_sendmsg+0x14/0x24)
[   32.100403] [<c0ea9f40>] (sock_sendmsg) from [<c0eaa780>] (___sys_sendmsg+0x214/0x228)
[   32.108279] [<c0eaa780>] (___sys_sendmsg) from [<c0eabad0>] (__sys_sendmsg+0x50/0x8c)
[   32.116068] [<c0eabad0>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x54)
[   32.123938] Exception stack(0xe8167fa8 to 0xe8167ff0)
[   32.128960] 7fa0:                   b6fa68c8 000000f8 00000003 bea142d0 00000000 00000000
[   32.137093] 7fc0: b6fa68c8 000000f8 0052154c 00000128 5d6468a2 00000000 00000028 00558c9c
[   32.145224] 7fe0: 00000070 bea14278 00530d64 b6e17e64
[   32.150659] ---[ end trace 2139c9827c3e5177 ]---

This happens because the qdisc ->dequeue callback gets called. Which
again is not illegal, the qdisc will dequeue even when the interface is
up but doesn't have carrier (and hence SPEED_UNKNOWN), and the frames
will be dropped further down the stack in dev_direct_xmit().

And, at the end of the day, for what? For calculating the initial budget
of an interface which is non-operational at the moment and where frames
will get dropped anyway.

So if we can't figure out the link speed, default to SPEED_10 and move
along. We can also remove the runtime check now.

Cc: Leandro Dorileo <leandro.maciel.dorileo@intel.com>
Fixes: 7b9eba7b ("net/sched: taprio: fix picos_per_byte miscalculation")
Acked-by: NVinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: NVladimir Oltean <olteanv@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

taprio_init may fail earlier than this line:

	list_add(&q->taprio_list, &taprio_list);

i.e. due to the net device not being multi queue.

Attempting to remove q from the global taprio_list when it is not part
of it will result in a kernel panic.

Fix it by matching list_add and list_del better to one another in the
order of operations. This way we can keep the deletion unconditional
and with lower complexity - O(1).

Cc: Leandro Dorileo <leandro.maciel.dorileo@intel.com>
Fixes: 7b9eba7b ("net/sched: taprio: fix picos_per_byte miscalculation")
Signed-off-by: NVladimir Oltean <olteanv@gmail.com>
Acked-by: NVinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the register value width as the regmap_config name to prevent the
following error when the second and third regmap_configs are
initialized.
 "debugfs: Directory '${bus-id}' with parent 'regmap' already present!"
Signed-off-by: NGeorge McCollister <george.mccollister@gmail.com>
Reviewed-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Simon Wunderlich says:

====================
Here are two batman-adv bugfixes:

 - Fix OGM and OGMv2 header read boundary check,
   by Sven Eckelmann (2 patches)
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Spurious warning when loading rules using the physdev match,
   from Todd Seidelmann.

2) Fix FTP conntrack helper debugging output, from Thomas Jarosch.

3) Restore per-netns nf_conntrack_{acct,helper,timeout} sysctl knobs,
   from Florian Westphal.

4) Clear skbuff timestamp from the flowtable datapath, also from Florian.

5) Fix incorrect byteorder of NFT_META_BRI_IIFVPROTO, from wenxu.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2019-08-31

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix 32-bit zero-extension during constant blinding which
   has been causing a regression on ppc64, from Naveen.

2) Fix a latency bug in nfp driver when updating stack index
   register, from Jiong.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a local endpoint is ceases to be in use, such as when the kafs module
is unloaded, the kernel will emit an assertion failure if there are any
outstanding client connections:

	rxrpc: Assertion failed
	------------[ cut here ]------------
	kernel BUG at net/rxrpc/local_object.c:433!

and even beyond that, will evince other oopses if there are service
connections still present.

Fix this by:

 (1) Removing the triggering of connection reaping when an rxrpc socket is
     released.  These don't actually clean up the connections anyway - and
     further, the local endpoint may still be in use through another
     socket.

 (2) Mark the local endpoint as dead when we start the process of tearing
     it down.

 (3) When destroying a local endpoint, strip all of its client connections
     from the idle list and discard the ref on each that the list was
     holding.

 (4) When destroying a local endpoint, call the service connection reaper
     directly (rather than through a workqueue) to immediately kill off all
     outstanding service connections.

 (5) Make the service connection reaper reap connections for which the
     local endpoint is marked dead.

Only after destroying the connections can we close the socket lest we get
an oops in a workqueue that's looking at a connection or a peer.

Fixes: 3d18cbb7 ("rxrpc: Fix conn expiry timers")
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-by: NMarc Dionne <marc.dionne@auristor.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

David Howells says:

====================
rxrpc: Fix use of skb_cow_data()

Here's a series of patches that replaces the use of skb_cow_data() in rxrpc
with skb_unshare() early on in the input process.  The problem that is
being seen is that skb_cow_data() indirectly requires that the maximum
usage count on an sk_buff be 1, and it may generate an assertion failure in
pskb_expand_head() if not.

This can occur because rxrpc_input_data() may be still holding a ref when
it has just attached the sk_buff to the rx ring and given that attachment
its own ref.  If recvmsg happens fast enough, skb_cow_data() can see the
ref still held by the softirq handler.

Further, a packet may contain multiple subpackets, each of which gets its
own attachment to the ring and its own ref - also making skb_cow_data() go
bang.

Fix this by:

 (1) The DATA packet is currently parsed for subpackets twice by the input
     routines.  Parse it just once instead and make notes in the sk_buff
     private data.

 (2) Use the notes from (1) when attaching the packet to the ring multiple
     times.  Once the packet is attached to the ring, recvmsg can see it
     and start modifying it, so the softirq handler is not permitted to
     look inside it from that point.

 (3) Pass the ref from the input code to the ring rather than getting an
     extra ref.  rxrpc_input_data() uses a ref on the second refcount to
     prevent the packet from evaporating under it.

 (4) Call skb_unshare() on secured DATA packets in rxrpc_input_packet()
     before we take call->input_lock.  Other sorts of packets don't get
     modified and so can be left.

     A trace is emitted if skb_unshare() eats the skb.  Note that
     skb_share() for our accounting in this regard as we can't see the
     parameters in the packet to log in a trace line if it releases it.

 (5) Remove the calls to skb_cow_data().  These are then no longer
     necessary.

There are also patches to improve the rxrpc_skb tracepoint to make sure
that Tx-derived buffers are identified separately from Rx-derived buffers
in the trace.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The devicetree binding lists the phy phy as optional. As such, the
driver should not bail out if it can't find a regulator. Instead it
should just skip the remaining regulator related code and continue
on normally.

Skip the remainder of phy_power_on() if a regulator supply isn't
available. This also gets rid of the bogus return code.

Fixes: 2e12f536 ("net: stmmac: dwmac-rk: Use standard devicetree property for phy regulator")
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In xgbe_mod_init(), we should do cleanup if some error occurs
Reported-by: NHulk Robot <hulkci@huawei.com>
Fixes: efbaa828 ("amd-xgbe: Add support to handle device renaming")
Fixes: 47f164de ("amd-xgbe: Add PCI device support")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Get the vlan_proto of ingress bridge in network byteorder as userspace
expects. Otherwise this is inconsistent with NFT_META_PROTOCOL.

Fixes: 2a3a93ef ("netfilter: nft_meta_bridge: Add NFT_META_BRI_IIFVPROTO support")
Signed-off-by: Nwenxu <wenxu@ucloud.cn>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Merge tag 'mac80211-for-davem-2019-08-29' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
We have
 * one fix for a driver as I'm covering for Kalle while he's on vacation
 * two fixes for eapol-over-nl80211 work
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The noencrypt flag was intended to be set if the "frame was received
unencrypted" according to include/uapi/linux/nl80211.h.  However, the
current behavior is opposite of this.

Cc: stable@vger.kernel.org
Fixes: 018f6fbf ("mac80211: Send control port frames over nl80211")
Signed-off-by: NDenis Kenzior <denkenz@gmail.com>
Link: https://lore.kernel.org/r/20190827224120.14545-3-denkenz@gmail.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

In ieee80211_deliver_skb_to_local_stack intercepts EAPoL frames if
mac80211 is configured to do so and forwards the contents over nl80211.
During this process some additional data is also forwarded, including
whether the frame was received encrypted or not.  Unfortunately just
prior to the call to ieee80211_deliver_skb_to_local_stack, skb->cb is
cleared, resulting in incorrect data being exposed over nl80211.

Fixes: 018f6fbf ("mac80211: Send control port frames over nl80211")
Cc: stable@vger.kernel.org
Signed-off-by: NDenis Kenzior <denkenz@gmail.com>
Link: https://lore.kernel.org/r/20190827224120.14545-2-denkenz@gmail.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

We need to use a different firmware for C0 versions of killer Qu NICs.
Add structures for them and handle them in the if block that detects
C0 revisions.

Additionally, instead of having an inclusive check for QnJ devices,
make the selection exclusive, so that switching to QnJ is the
exception, not the default.  This prevents us from having to add all
the non-QnJ cards to an exclusion list.  To do so, only go into the
QnJ block if the device has an RF ID type HR and HW revision QnJ.

Cc: stable@vger.kernel.org # 5.2
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20190821171732.2266-1-luca@coelho.fiSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

If 'fq' qdisc is used and a program has requested timestamps,
skb->tstamp needs to be cleared, else fq will treat these as
'transmit time'.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

A similar workaround for the suspend/resume problem is needed for yet
another ASUS machines, P6X models.  Like the previous fix, the BIOS
doesn't provide the standard DMI_SYS_* entry, so again DMI_BOARD_*
entries are used instead.
Reported-and-tested-by: NSteveM <swm@swm1.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
nfp: flower: fix bugs in merge tunnel encap code

John says:

There are few bugs in the merge encap code that have come to light with
recent driver changes. Effectively, flow bind callbacks were being
registered twice when using internal ports (new 'busy' code triggers
this). There was also an issue with neighbour notifier messages being
ignored for internal ports.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Recent code changes to NFP allowed the offload of neighbour entries to FW
when the next hop device was an internal port. This allows for offload of
tunnel encap when the end-point IP address is applied to such a port.

Unfortunately, the neighbour event handler still rejects events that are
not associated with a repr dev and so the firmware neighbour table may get
out of sync for internal ports.

Fix this by allowing internal port neighbour events to be correctly
processed.

Fixes: 45756dfe ("nfp: flower: allow tunnels to output to internal port")
Signed-off-by: NJohn Hurley <john.hurley@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Internal port TC offload is implemented through user-space applications
(such as OvS) by adding filters at egress via TC clsact qdiscs. Indirect
block offload support in the NFP driver accepts both ingress qdisc binds
and egress binds if the device is an internal port. However, clsact sends
bind notification for both ingress and egress block binds which can lead
to the driver registering multiple callbacks and receiving multiple
notifications of new filters.

Fix this by rejecting ingress block bind callbacks when the port is
internal and only adding filter callbacks for egress binds.

Fixes: 4d12ba42 ("nfp: flower: allow offloading of matches on 'internal' ports")
Signed-off-by: NJohn Hurley <john.hurley@netronome.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hayes Wang says:

====================
r8152: fix side effect

v3:
Update the commit message for patch #1.

v2:
Replace patch #2 with "r8152: remove calling netif_napi_del".

v1:
The commit 0ee1f473 ("r8152: napi hangup fix after disconnect")
add a check to avoid using napi_disable after netif_napi_del. However,
the commit ffa9fec3 ("r8152: set RTL8152_UNPLUG only for real
disconnection") let the check useless.

Therefore, I revert commit 0ee1f473 ("r8152: napi hangup fix
after disconnect") first, and add another patch to fix it.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove unnecessary use of netif_napi_del. This also avoids to call
napi_disable() after netif_napi_del().
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 0ee1f473.

The commit 0ee1f473 ("r8152: napi hangup fix after
disconnect") adds a check about RTL8152_UNPLUG to determine
if calling napi_disable() is invalid in rtl8152_close(),
when rtl8152_disconnect() is called. This avoids to use
napi_disable() after calling netif_napi_del().

Howver, commit ffa9fec3 ("r8152: set RTL8152_UNPLUG
only for real disconnection") causes that RTL8152_UNPLUG
is not always set when calling rtl8152_disconnect().
Therefore, I have to revert commit 0ee1f473 ("r8152:
napi hangup fix after disconnect"), first. And submit
another patch to fix it.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that 'TCQ_F_CPUSTATS' bit can be cleared, depending on the value of
'TCQ_F_NOLOCK' bit in the parent qdisc, we can't assume anymore that
per-cpu counters are there in the error path of skb_array_produce().
Otherwise, the following splat can be seen:

 Unable to handle kernel paging request at virtual address 0000600dea430008
 Mem abort info:
   ESR = 0x96000005
   Exception class = DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
 Data abort info:
   ISV = 0, ISS = 0x00000005
   CM = 0, WnR = 0
 user pgtable: 64k pages, 48-bit VAs, pgdp = 000000007b97530e
 [0000600dea430008] pgd=0000000000000000, pud=0000000000000000
 Internal error: Oops: 96000005 [#1] SMP
[...]
 pstate: 10000005 (nzcV daif -PAN -UAO)
 pc : pfifo_fast_enqueue+0x524/0x6e8
 lr : pfifo_fast_enqueue+0x46c/0x6e8
 sp : ffff800d39376fe0
 x29: ffff800d39376fe0 x28: 1ffff001a07d1e40
 x27: ffff800d03e8f188 x26: ffff800d03e8f200
 x25: 0000000000000062 x24: ffff800d393772f0
 x23: 0000000000000000 x22: 0000000000000403
 x21: ffff800cca569a00 x20: ffff800d03e8ee00
 x19: ffff800cca569a10 x18: 00000000000000bf
 x17: 0000000000000000 x16: 0000000000000000
 x15: 0000000000000000 x14: ffff1001a726edd0
 x13: 1fffe4000276a9a4 x12: 0000000000000000
 x11: dfff200000000000 x10: ffff800d03e8f1a0
 x9 : 0000000000000003 x8 : 0000000000000000
 x7 : 00000000f1f1f1f1 x6 : ffff1001a726edea
 x5 : ffff800cca56a53c x4 : 1ffff001bf9a8003
 x3 : 1ffff001bf9a8003 x2 : 1ffff001a07d1dcb
 x1 : 0000600dea430000 x0 : 0000600dea430008
 Process ping (pid: 6067, stack limit = 0x00000000dc0aa557)
 Call trace:
  pfifo_fast_enqueue+0x524/0x6e8
  htb_enqueue+0x660/0x10e0 [sch_htb]
  __dev_queue_xmit+0x123c/0x2de0
  dev_queue_xmit+0x24/0x30
  ip_finish_output2+0xc48/0x1720
  ip_finish_output+0x548/0x9d8
  ip_output+0x334/0x788
  ip_local_out+0x90/0x138
  ip_send_skb+0x44/0x1d0
  ip_push_pending_frames+0x5c/0x78
  raw_sendmsg+0xed8/0x28d0
  inet_sendmsg+0xc4/0x5c0
  sock_sendmsg+0xac/0x108
  __sys_sendto+0x1ac/0x2a0
  __arm64_sys_sendto+0xc4/0x138
  el0_svc_handler+0x13c/0x298
  el0_svc+0x8/0xc
 Code: f9402e80 d538d081 91002000 8b010000 (885f7c03)

Fix this by testing the value of 'TCQ_F_CPUSTATS' bit in 'qdisc->flags',
before dereferencing 'qdisc->cpu_qstats'.

Fixes: 8a53e616 ("net: sched: when clearing NOLOCK, clear TCQ_F_CPUSTATS, too")
CC: Paolo Abeni <pabeni@redhat.com>
CC: Stefano Brivio <sbrivio@redhat.com>
Reported-by: NLi Shuang <shuali@redhat.com>
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Acked-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TCP associates tx timestamp requests with a byte in the bytestream.
If merging skbs in tcp_mtu_probe, migrate the tstamp request.

Similar to MSG_EOR, do not allow moving a timestamp from any segment
in the probe but the last. This to avoid merging multiple timestamps.

Tested with the packetdrill script at
https://github.com/wdebruij/packetdrill/commits/mtu_probe-1

Link: http://patchwork.ozlabs.org/patch/1143278/#2232897
Fixes: 4ed2d765 ("net-timestamp: TCP timestamping")
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Action sample doesn't properly handle psample_group pointer in overwrite
case. Following issues need to be fixed:

- In tcf_sample_init() function RCU_INIT_POINTER() is used to set
  s->psample_group, even though we neither setting the pointer to NULL, nor
  preventing concurrent readers from accessing the pointer in some way.
  Use rcu_swap_protected() instead to safely reset the pointer.

- Old value of s->psample_group is not released or deallocated in any way,
  which results resource leak. Use psample_group_put() on non-NULL value
  obtained with rcu_swap_protected().

- The function psample_group_put() that released reference to struct
  psample_group pointed by rcu-pointer s->psample_group doesn't respect rcu
  grace period when deallocating it. Extend struct psample_group with rcu
  head and use kfree_rcu when freeing it.

Fixes: 5c5670fa ("net/sched: Introduce sample tc action")
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, the ibmvnic driver will not schedule device resets
if the device is being removed, but does not check the device
state before the reset is actually processed. This leads to a race
where a reset is scheduled with a valid device state but is
processed after the driver has been removed, resulting in an oops.

Fix this by checking the device state before processing a queued
reset event.
Reported-by: NAbdul Haleem <abdhalee@linux.vnet.ibm.com>
Tested-by: NAbdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: NThomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Only the first fragment in a datagram contains the L4 headers.  When the
Open vSwitch module parses a packet, it always sets the IP protocol
field in the key, but can only set the L4 fields on the first fragment.
The original behavior would not clear the L4 portion of the key, so
garbage values would be sent in the key for "later" fragments.  This
patch clears the L4 fields in that circumstance to prevent sending those
garbage values as part of the upcall.
Signed-off-by: NJustin Pettit <jpettit@ovn.org>
Acked-by: NPravin B Shelar <pshelar@ovn.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When IP fragments are reassembled before being sent to conntrack, the
key from the last fragment is used.  Unless there are reordering
issues, the last fragment received will not contain the L4 ports, so the
key for the reassembled datagram won't contain them.  This patch updates
the key once we have a reassembled datagram.

The handle_fragments() function works on L3 headers so we pull the L3/L4
flow key update code from key_extract into a new function
'key_extract_l3l4'.  Then we add a another new function
ovs_flow_key_update_l3l4() and export it so that it is accessible by
handle_fragments() for conntrack packet reassembly.
Co-authored-by: NJustin Pettit <jpettit@ovn.org>
Signed-off-by: NGreg Rose <gvrose8192@gmail.com>
Acked-by: NPravin B Shelar <pshelar@ovn.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similar to the fix done for IPv4 in commit e5b1c6c6
("igmp: fix memory leak in igmpv3_del_delrec()"), we need to
make sure mca_tomb and mca_sources are not blindly overwritten.

Using swap() then a call to ip6_mc_clear_src() will take care
of the missing free.

BUG: memory leak
unreferenced object 0xffff888117d9db00 (size 64):
  comm "syz-executor247", pid 6918, jiffies 4294943989 (age 25.350s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 fe 88 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000005b463030>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
    [<000000005b463030>] slab_post_alloc_hook mm/slab.h:522 [inline]
    [<000000005b463030>] slab_alloc mm/slab.c:3319 [inline]
    [<000000005b463030>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3548
    [<00000000939cbf94>] kmalloc include/linux/slab.h:552 [inline]
    [<00000000939cbf94>] kzalloc include/linux/slab.h:748 [inline]
    [<00000000939cbf94>] ip6_mc_add1_src net/ipv6/mcast.c:2236 [inline]
    [<00000000939cbf94>] ip6_mc_add_src+0x31f/0x420 net/ipv6/mcast.c:2356
    [<00000000d8972221>] ip6_mc_source+0x4a8/0x600 net/ipv6/mcast.c:449
    [<000000002b203d0d>] do_ipv6_setsockopt.isra.0+0x1b92/0x1dd0 net/ipv6/ipv6_sockglue.c:748
    [<000000001f1e2d54>] ipv6_setsockopt+0x89/0xd0 net/ipv6/ipv6_sockglue.c:944
    [<00000000c8f7bdf9>] udpv6_setsockopt+0x4e/0x90 net/ipv6/udp.c:1558
    [<000000005a9a0c5e>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3139
    [<00000000910b37b2>] __sys_setsockopt+0x10f/0x220 net/socket.c:2084
    [<00000000e9108023>] __do_sys_setsockopt net/socket.c:2100 [inline]
    [<00000000e9108023>] __se_sys_setsockopt net/socket.c:2097 [inline]
    [<00000000e9108023>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2097
    [<00000000f4818160>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:296
    [<000000008d367e8f>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 1666d49e ("mld: do not remove mld souce list info when set link down")
Fixes: 9c8bb163 ("igmp, mld: Fix memory leak in igmpv3/mld_del_delrec()")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that 'TCQ_F_CPUSTATS' bit can be cleared, depending on the value of
'TCQ_F_NOLOCK' bit in the parent qdisc, we need to be sure that per-cpu
counters are present when 'reset()' is called for pfifo_fast qdiscs.
Otherwise, the following script:

 # tc q a dev lo handle 1: root htb default 100
 # tc c a dev lo parent 1: classid 1:100 htb \
 > rate 95Mbit ceil 100Mbit burst 64k
 [...]
 # tc f a dev lo parent 1: protocol arp basic classid 1:100
 [...]
 # tc q a dev lo parent 1:100 handle 100: pfifo_fast
 [...]
 # tc q d dev lo root

can generate the following splat:

 Unable to handle kernel paging request at virtual address dfff2c01bd148000
 Mem abort info:
   ESR = 0x96000004
   Exception class = DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
 Data abort info:
   ISV = 0, ISS = 0x00000004
   CM = 0, WnR = 0
 [dfff2c01bd148000] address between user and kernel address ranges
 Internal error: Oops: 96000004 [#1] SMP
 [...]
 pstate: 80000005 (Nzcv daif -PAN -UAO)
 pc : pfifo_fast_reset+0x280/0x4d8
 lr : pfifo_fast_reset+0x21c/0x4d8
 sp : ffff800d09676fa0
 x29: ffff800d09676fa0 x28: ffff200012ee22e4
 x27: dfff200000000000 x26: 0000000000000000
 x25: ffff800ca0799958 x24: ffff1001940f332b
 x23: 0000000000000007 x22: ffff200012ee1ab8
 x21: 0000600de8a40000 x20: 0000000000000000
 x19: ffff800ca0799900 x18: 0000000000000000
 x17: 0000000000000002 x16: 0000000000000000
 x15: 0000000000000000 x14: 0000000000000000
 x13: 0000000000000000 x12: ffff1001b922e6e2
 x11: 1ffff001b922e6e1 x10: 0000000000000000
 x9 : 1ffff001b922e6e1 x8 : dfff200000000000
 x7 : 0000000000000000 x6 : 0000000000000000
 x5 : 1fffe400025dc45c x4 : 1fffe400025dc357
 x3 : 00000c01bd148000 x2 : 0000600de8a40000
 x1 : 0000000000000007 x0 : 0000600de8a40004
 Call trace:
  pfifo_fast_reset+0x280/0x4d8
  qdisc_reset+0x6c/0x370
  htb_reset+0x150/0x3b8 [sch_htb]
  qdisc_reset+0x6c/0x370
  dev_deactivate_queue.constprop.5+0xe0/0x1a8
  dev_deactivate_many+0xd8/0x908
  dev_deactivate+0xe4/0x190
  qdisc_graft+0x88c/0xbd0
  tc_get_qdisc+0x418/0x8a8
  rtnetlink_rcv_msg+0x3a8/0xa78
  netlink_rcv_skb+0x18c/0x328
  rtnetlink_rcv+0x28/0x38
  netlink_unicast+0x3c4/0x538
  netlink_sendmsg+0x538/0x9a0
  sock_sendmsg+0xac/0xf8
  ___sys_sendmsg+0x53c/0x658
  __sys_sendmsg+0xc8/0x140
  __arm64_sys_sendmsg+0x74/0xa8
  el0_svc_handler+0x164/0x468
  el0_svc+0x10/0x14
 Code: 910012a0 92400801 d343fc03 11000c21 (38fb6863)

Fix this by testing the value of 'TCQ_F_CPUSTATS' bit in 'qdisc->flags',
before dereferencing 'qdisc->cpu_qstats'.

Changes since v1:
 - coding style improvements, thanks to Stefano Brivio

Fixes: 8a53e616 ("net: sched: when clearing NOLOCK, clear TCQ_F_CPUSTATS, too")
CC: Paolo Abeni <pabeni@redhat.com>
Reported-by: NLi Shuang <shuali@redhat.com>
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Acked-by: NPaolo Abeni <pabeni@redhat.com>
Reviewed-by: NStefano Brivio <sbrivio@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>