1. 07 1月, 2018 1 次提交
  2. 24 12月, 2017 1 次提交
    • D
      x86/mm/pti: Allocate a separate user PGD · d9e9a641
      Dave Hansen 提交于
      Kernel page table isolation requires to have two PGDs. One for the kernel,
      which contains the full kernel mapping plus the user space mapping and one
      for user space which contains the user space mappings and the minimal set
      of kernel mappings which are required by the architecture to be able to
      transition from and to user space.
      
      Add the necessary preliminaries.
      
      [ tglx: Split out from the big kaiser dump. EFI fixup from Kirill ]
      Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
      Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      Reviewed-by: NBorislav Petkov <bp@suse.de>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brian Gerst <brgerst@gmail.com>
      Cc: David Laight <David.Laight@aculab.com>
      Cc: Denys Vlasenko <dvlasenk@redhat.com>
      Cc: Eduardo Valentin <eduval@amazon.com>
      Cc: Greg KH <gregkh@linuxfoundation.org>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Josh Poimboeuf <jpoimboe@redhat.com>
      Cc: Juergen Gross <jgross@suse.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Will Deacon <will.deacon@arm.com>
      Cc: aliguori@amazon.com
      Cc: daniel.gruss@iaik.tugraz.at
      Cc: hughd@google.com
      Cc: keescook@google.com
      Signed-off-by: NIngo Molnar <mingo@kernel.org>
      d9e9a641
  3. 02 11月, 2017 1 次提交
    • G
      License cleanup: add SPDX GPL-2.0 license identifier to files with no license · b2441318
      Greg Kroah-Hartman 提交于
      Many source files in the tree are missing licensing information, which
      makes it harder for compliance tools to determine the correct license.
      
      By default all files without license information are under the default
      license of the kernel, which is GPL version 2.
      
      Update the files which contain no license information with the 'GPL-2.0'
      SPDX license identifier.  The SPDX identifier is a legally binding
      shorthand, which can be used instead of the full boiler plate text.
      
      This patch is based on work done by Thomas Gleixner and Kate Stewart and
      Philippe Ombredanne.
      
      How this work was done:
      
      Patches were generated and checked against linux-4.14-rc6 for a subset of
      the use cases:
       - file had no licensing information it it.
       - file was a */uapi/* one with no licensing information in it,
       - file was a */uapi/* one with existing licensing information,
      
      Further patches will be generated in subsequent months to fix up cases
      where non-standard license headers were used, and references to license
      had to be inferred by heuristics based on keywords.
      
      The analysis to determine which SPDX License Identifier to be applied to
      a file was done in a spreadsheet of side by side results from of the
      output of two independent scanners (ScanCode & Windriver) producing SPDX
      tag:value files created by Philippe Ombredanne.  Philippe prepared the
      base worksheet, and did an initial spot review of a few 1000 files.
      
      The 4.13 kernel was the starting point of the analysis with 60,537 files
      assessed.  Kate Stewart did a file by file comparison of the scanner
      results in the spreadsheet to determine which SPDX license identifier(s)
      to be applied to the file. She confirmed any determination that was not
      immediately clear with lawyers working with the Linux Foundation.
      
      Criteria used to select files for SPDX license identifier tagging was:
       - Files considered eligible had to be source code files.
       - Make and config files were included as candidates if they contained >5
         lines of source
       - File already had some variant of a license header in it (even if <5
         lines).
      
      All documentation files were explicitly excluded.
      
      The following heuristics were used to determine which SPDX license
      identifiers to apply.
      
       - when both scanners couldn't find any license traces, file was
         considered to have no license information in it, and the top level
         COPYING file license applied.
      
         For non */uapi/* files that summary was:
      
         SPDX license identifier                            # files
         ---------------------------------------------------|-------
         GPL-2.0                                              11139
      
         and resulted in the first patch in this series.
      
         If that file was a */uapi/* path one, it was "GPL-2.0 WITH
         Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:
      
         SPDX license identifier                            # files
         ---------------------------------------------------|-------
         GPL-2.0 WITH Linux-syscall-note                        930
      
         and resulted in the second patch in this series.
      
       - if a file had some form of licensing information in it, and was one
         of the */uapi/* ones, it was denoted with the Linux-syscall-note if
         any GPL family license was found in the file or had no licensing in
         it (per prior point).  Results summary:
      
         SPDX license identifier                            # files
         ---------------------------------------------------|------
         GPL-2.0 WITH Linux-syscall-note                       270
         GPL-2.0+ WITH Linux-syscall-note                      169
         ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
         ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
         LGPL-2.1+ WITH Linux-syscall-note                      15
         GPL-1.0+ WITH Linux-syscall-note                       14
         ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
         LGPL-2.0+ WITH Linux-syscall-note                       4
         LGPL-2.1 WITH Linux-syscall-note                        3
         ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
         ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1
      
         and that resulted in the third patch in this series.
      
       - when the two scanners agreed on the detected license(s), that became
         the concluded license(s).
      
       - when there was disagreement between the two scanners (one detected a
         license but the other didn't, or they both detected different
         licenses) a manual inspection of the file occurred.
      
       - In most cases a manual inspection of the information in the file
         resulted in a clear resolution of the license that should apply (and
         which scanner probably needed to revisit its heuristics).
      
       - When it was not immediately clear, the license identifier was
         confirmed with lawyers working with the Linux Foundation.
      
       - If there was any question as to the appropriate license identifier,
         the file was flagged for further research and to be revisited later
         in time.
      
      In total, over 70 hours of logged manual review was done on the
      spreadsheet to determine the SPDX license identifiers to apply to the
      source files by Kate, Philippe, Thomas and, in some cases, confirmation
      by lawyers working with the Linux Foundation.
      
      Kate also obtained a third independent scan of the 4.13 code base from
      FOSSology, and compared selected files where the other two scanners
      disagreed against that SPDX file, to see if there was new insights.  The
      Windriver scanner is based on an older version of FOSSology in part, so
      they are related.
      
      Thomas did random spot checks in about 500 files from the spreadsheets
      for the uapi headers and agreed with SPDX license identifier in the
      files he inspected. For the non-uapi files Thomas did random spot checks
      in about 15000 files.
      
      In initial set of patches against 4.14-rc6, 3 files were found to have
      copy/paste license identifier errors, and have been fixed to reflect the
      correct identifier.
      
      Additionally Philippe spent 10 hours this week doing a detailed manual
      inspection and review of the 12,461 patched files from the initial patch
      version early this week with:
       - a full scancode scan run, collecting the matched texts, detected
         license ids and scores
       - reviewing anything where there was a license detected (about 500+
         files) to ensure that the applied SPDX license was correct
       - reviewing anything where there was no detection but the patch license
         was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
         SPDX license was correct
      
      This produced a worksheet with 20 files needing minor correction.  This
      worksheet was then exported into 3 different .csv files for the
      different types of files to be modified.
      
      These .csv files were then reviewed by Greg.  Thomas wrote a script to
      parse the csv files and add the proper SPDX tag to the file, in the
      format that the file expected.  This script was further refined by Greg
      based on the output to detect more types of files automatically and to
      distinguish between header and source .c files (which need different
      comment types.)  Finally Greg ran the script using the .csv files to
      generate the patches.
      Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
      Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
      Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
      Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b2441318
  4. 26 8月, 2017 1 次提交
  5. 18 7月, 2017 2 次提交
    • T
      x86/efi: Update EFI pagetable creation to work with SME · 38eecccd
      Tom Lendacky 提交于
      When SME is active, pagetable entries created for EFI need to have the
      encryption mask set as necessary.
      
      When the new pagetable pages are allocated they are mapped encrypted. So,
      update the efi_pgt value that will be used in CR3 to include the encryption
      mask so that the PGD table can be read successfully. The pagetable mapping
      as well as the kernel are also added to the pagetable mapping as encrypted.
      All other EFI mappings are mapped decrypted (tables, etc.).
      Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
      Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
      Reviewed-by: NMatt Fleming <matt@codeblueprint.co.uk>
      Reviewed-by: NBorislav Petkov <bp@suse.de>
      Cc: Alexander Potapenko <glider@google.com>
      Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brijesh Singh <brijesh.singh@amd.com>
      Cc: Dave Young <dyoung@redhat.com>
      Cc: Dmitry Vyukov <dvyukov@google.com>
      Cc: Jonathan Corbet <corbet@lwn.net>
      Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      Cc: Larry Woodman <lwoodman@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Michael S. Tsirkin <mst@redhat.com>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Radim Krčmář <rkrcmar@redhat.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Toshimitsu Kani <toshi.kani@hpe.com>
      Cc: kasan-dev@googlegroups.com
      Cc: kvm@vger.kernel.org
      Cc: linux-arch@vger.kernel.org
      Cc: linux-doc@vger.kernel.org
      Cc: linux-efi@vger.kernel.org
      Cc: linux-mm@kvack.org
      Link: http://lkml.kernel.org/r/9a8f4c502db4a84b09e2f0a1555bb75aa8b69785.1500319216.git.thomas.lendacky@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      38eecccd
    • T
      efi: Update efi_mem_type() to return an error rather than 0 · f99afd08
      Tom Lendacky 提交于
      The efi_mem_type() function currently returns a 0, which maps to
      EFI_RESERVED_TYPE, if the function is unable to find a memmap entry for
      the supplied physical address. Returning EFI_RESERVED_TYPE implies that
      a memmap entry exists, when it doesn't.  Instead of returning 0, change
      the function to return a negative error value when no memmap entry is
      found.
      Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
      Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
      Reviewed-by: NMatt Fleming <matt@codeblueprint.co.uk>
      Reviewed-by: NBorislav Petkov <bp@suse.de>
      Cc: Alexander Potapenko <glider@google.com>
      Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brijesh Singh <brijesh.singh@amd.com>
      Cc: Dave Young <dyoung@redhat.com>
      Cc: Dmitry Vyukov <dvyukov@google.com>
      Cc: Jonathan Corbet <corbet@lwn.net>
      Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      Cc: Larry Woodman <lwoodman@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Michael S. Tsirkin <mst@redhat.com>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Radim Krčmář <rkrcmar@redhat.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Toshimitsu Kani <toshi.kani@hpe.com>
      Cc: kasan-dev@googlegroups.com
      Cc: kvm@vger.kernel.org
      Cc: linux-arch@vger.kernel.org
      Cc: linux-doc@vger.kernel.org
      Cc: linux-efi@vger.kernel.org
      Cc: linux-mm@kvack.org
      Link: http://lkml.kernel.org/r/7fbf40a9dc414d5da849e1ddcd7f7c1285e4e181.1500319216.git.thomas.lendacky@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      f99afd08
  6. 30 6月, 2017 1 次提交
  7. 13 6月, 2017 1 次提交
  8. 05 6月, 2017 2 次提交
  9. 28 5月, 2017 3 次提交
    • B
      x86/efi: Correct EFI identity mapping under 'efi=old_map' when KASLR is enabled · 94133e46
      Baoquan He 提交于
      For EFI with the 'efi=old_map' kernel option specified, the kernel will panic
      when KASLR is enabled:
      
        BUG: unable to handle kernel paging request at 000000007febd57e
        IP: 0x7febd57e
        PGD 1025a067
        PUD 0
      
        Oops: 0010 [#1] SMP
        Call Trace:
         efi_enter_virtual_mode()
         start_kernel()
         x86_64_start_reservations()
         x86_64_start_kernel()
         start_cpu()
      
      The root cause is that the identity mapping is not built correctly
      in the 'efi=old_map' case.
      
      On 'nokaslr' kernels, PAGE_OFFSET is 0xffff880000000000 which is PGDIR_SIZE
      aligned. We can borrow the PUD table from the direct mappings safely. Given a
      physical address X, we have pud_index(X) == pud_index(__va(X)).
      
      However, on KASLR kernels, PAGE_OFFSET is PUD_SIZE aligned. For a given physical
      address X, pud_index(X) != pud_index(__va(X)). We can't just copy the PGD entry
      from direct mapping to build identity mapping, instead we need to copy the
      PUD entries one by one from the direct mapping.
      
      Fix it.
      Signed-off-by: NBaoquan He <bhe@redhat.com>
      Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk>
      Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
      Cc: Bhupesh Sharma <bhsharma@redhat.com>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Dave Young <dyoung@redhat.com>
      Cc: Frank Ramsay <frank.ramsay@hpe.com>
      Cc: Kees Cook <keescook@chromium.org>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Russ Anderson <rja@sgi.com>
      Cc: Thomas Garnier <thgarnie@google.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: linux-efi@vger.kernel.org
      Link: http://lkml.kernel.org/r/20170526113652.21339-5-matt@codeblueprint.co.uk
      [ Fixed and reworded the changelog and code comments to be more readable. ]
      Signed-off-by: NIngo Molnar <mingo@kernel.org>
      94133e46
    • S
      x86/efi: Disable runtime services on kexec kernel if booted with efi=old_map · 4e52797d
      Sai Praneeth 提交于
      Booting kexec kernel with "efi=old_map" in kernel command line hits
      kernel panic as shown below.
      
       BUG: unable to handle kernel paging request at ffff88007fe78070
       IP: virt_efi_set_variable.part.7+0x63/0x1b0
       PGD 7ea28067
       PUD 7ea2b067
       PMD 7ea2d067
       PTE 0
       [...]
       Call Trace:
        virt_efi_set_variable()
        efi_delete_dummy_variable()
        efi_enter_virtual_mode()
        start_kernel()
        x86_64_start_reservations()
        x86_64_start_kernel()
        start_cpu()
      
      [ efi=old_map was never intended to work with kexec. The problem with
        using efi=old_map is that the virtual addresses are assigned from the
        memory region used by other kernel mappings; vmalloc() space.
        Potentially there could be collisions when booting kexec if something
        else is mapped at the virtual address we allocated for runtime service
        regions in the initial boot - Matt Fleming ]
      
      Since kexec was never intended to work with efi=old_map, disable
      runtime services in kexec if booted with efi=old_map, so that we don't
      panic.
      Tested-by: NLee Chun-Yi <jlee@suse.com>
      Signed-off-by: NSai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
      Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk>
      Acked-by: NDave Young <dyoung@redhat.com>
      Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Ravi Shankar <ravi.v.shankar@intel.com>
      Cc: Ricardo Neri <ricardo.neri@intel.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: linux-efi@vger.kernel.org
      Link: http://lkml.kernel.org/r/20170526113652.21339-4-matt@codeblueprint.co.ukSigned-off-by: NIngo Molnar <mingo@kernel.org>
      4e52797d
    • J
      efi: Don't issue error message when booted under Xen · 1ea34adb
      Juergen Gross 提交于
      When booted as Xen dom0 there won't be an EFI memmap allocated. Avoid
      issuing an error message in this case:
      
        [    0.144079] efi: Failed to allocate new EFI memmap
      Signed-off-by: NJuergen Gross <jgross@suse.com>
      Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk>
      Cc: <stable@vger.kernel.org> # v4.9+
      Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: linux-efi@vger.kernel.org
      Link: http://lkml.kernel.org/r/20170526113652.21339-2-matt@codeblueprint.co.ukSigned-off-by: NIngo Molnar <mingo@kernel.org>
      1ea34adb
  10. 09 5月, 2017 1 次提交
  11. 13 4月, 2017 1 次提交
    • O
      x86/efi: Don't try to reserve runtime regions · 6f6266a5
      Omar Sandoval 提交于
      Reserving a runtime region results in splitting the EFI memory
      descriptors for the runtime region. This results in runtime region
      descriptors with bogus memory mappings, leading to interesting crashes
      like the following during a kexec:
      
        general protection fault: 0000 [#1] SMP
        Modules linked in:
        CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc1 #53
        Hardware name: Wiwynn Leopard-Orv2/Leopard-DDR BW, BIOS LBM05   09/30/2016
        RIP: 0010:virt_efi_set_variable()
        ...
        Call Trace:
         efi_delete_dummy_variable()
         efi_enter_virtual_mode()
         start_kernel()
         ? set_init_arg()
         x86_64_start_reservations()
         x86_64_start_kernel()
         start_cpu()
        ...
        Kernel panic - not syncing: Fatal exception
      
      Runtime regions will not be freed and do not need to be reserved, so
      skip the memmap modification in this case.
      Signed-off-by: NOmar Sandoval <osandov@fb.com>
      Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk>
      Cc: <stable@vger.kernel.org> # v4.9+
      Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
      Cc: Dave Young <dyoung@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Jones <pjones@redhat.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: linux-efi@vger.kernel.org
      Fixes: 8e80632f ("efi/esrt: Use efi_mem_reserve() and avoid a kmalloc()")
      Link: http://lkml.kernel.org/r/20170412152719.9779-2-matt@codeblueprint.co.ukSigned-off-by: NIngo Molnar <mingo@kernel.org>
      6f6266a5
  12. 05 4月, 2017 2 次提交
  13. 27 3月, 2017 1 次提交
  14. 23 3月, 2017 1 次提交
  15. 16 3月, 2017 1 次提交
    • T
      x86: Remap GDT tables in the fixmap section · 69218e47
      Thomas Garnier 提交于
      Each processor holds a GDT in its per-cpu structure. The sgdt
      instruction gives the base address of the current GDT. This address can
      be used to bypass KASLR memory randomization. With another bug, an
      attacker could target other per-cpu structures or deduce the base of
      the main memory section (PAGE_OFFSET).
      
      This patch relocates the GDT table for each processor inside the
      fixmap section. The space is reserved based on number of supported
      processors.
      
      For consistency, the remapping is done by default on 32 and 64-bit.
      
      Each processor switches to its remapped GDT at the end of
      initialization. For hibernation, the main processor returns with the
      original GDT and switches back to the remapping at completion.
      
      This patch was tested on both architectures. Hibernation and KVM were
      both tested specially for their usage of the GDT.
      
      Thanks to Boris Ostrovsky <boris.ostrovsky@oracle.com> for testing and
      recommending changes for Xen support.
      Signed-off-by: NThomas Garnier <thgarnie@google.com>
      Cc: Alexander Potapenko <glider@google.com>
      Cc: Andrew Morton <akpm@linux-foundation.org>
      Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
      Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
      Cc: Borislav Petkov <bp@suse.de>
      Cc: Chris Wilson <chris@chris-wilson.co.uk>
      Cc: Christian Borntraeger <borntraeger@de.ibm.com>
      Cc: Dmitry Vyukov <dvyukov@google.com>
      Cc: Frederic Weisbecker <fweisbec@gmail.com>
      Cc: Jiri Kosina <jikos@kernel.org>
      Cc: Joerg Roedel <joro@8bytes.org>
      Cc: Jonathan Corbet <corbet@lwn.net>
      Cc: Josh Poimboeuf <jpoimboe@redhat.com>
      Cc: Juergen Gross <jgross@suse.com>
      Cc: Kees Cook <keescook@chromium.org>
      Cc: Len Brown <len.brown@intel.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Lorenzo Stoakes <lstoakes@gmail.com>
      Cc: Luis R . Rodriguez <mcgrof@kernel.org>
      Cc: Matt Fleming <matt@codeblueprint.co.uk>
      Cc: Michal Hocko <mhocko@suse.com>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
      Cc: Pavel Machek <pavel@ucw.cz>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Radim Krčmář <rkrcmar@redhat.com>
      Cc: Rafael J . Wysocki <rjw@rjwysocki.net>
      Cc: Rusty Russell <rusty@rustcorp.com.au>
      Cc: Stanislaw Gruszka <sgruszka@redhat.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Tim Chen <tim.c.chen@linux.intel.com>
      Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
      Cc: kasan-dev@googlegroups.com
      Cc: kernel-hardening@lists.openwall.com
      Cc: kvm@vger.kernel.org
      Cc: lguest@lists.ozlabs.org
      Cc: linux-doc@vger.kernel.org
      Cc: linux-efi@vger.kernel.org
      Cc: linux-mm@kvack.org
      Cc: linux-pm@vger.kernel.org
      Cc: xen-devel@lists.xenproject.org
      Cc: zijun_hu <zijun_hu@htc.com>
      Link: http://lkml.kernel.org/r/20170314170508.100882-2-thgarnie@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      69218e47
  16. 14 3月, 2017 1 次提交
  17. 01 2月, 2017 3 次提交
  18. 29 1月, 2017 2 次提交
    • I
      x86/boot/e820: Simplify the e820__update_table() interface · f9748fa0
      Ingo Molnar 提交于
      The e820__update_table() parameters are pretty complex:
      
        arch/x86/include/asm/e820/api.h:extern int  e820__update_table(struct e820_entry *biosmap, int max_nr_map, u32 *pnr_map);
      
      But 90% of the usage is trivial:
      
        arch/x86/kernel/e820.c:	if (e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries))
        arch/x86/kernel/e820.c:	e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries);
        arch/x86/kernel/e820.c:	e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries);
        arch/x86/kernel/e820.c:		if (e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries) < 0)
        arch/x86/kernel/e820.c:	e820__update_table(boot_params.e820_table, ARRAY_SIZE(boot_params.e820_table), &new_nr);
        arch/x86/kernel/early-quirks.c:	e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries);
        arch/x86/kernel/setup.c:	e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries);
        arch/x86/kernel/setup.c:		e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries);
        arch/x86/platform/efi/efi.c:	e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries);
        arch/x86/xen/setup.c:	e820__update_table(xen_e820_table.entries, ARRAY_SIZE(xen_e820_table.entries),
        arch/x86/xen/setup.c:	e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries);
        arch/x86/xen/setup.c:	e820__update_table(xen_e820_table.entries, ARRAY_SIZE(xen_e820_table.entries),
      
      as it only uses an exiting struct e820_table's entries array, its size and
      its current number of entries as input and output arguments.
      
      Only one use is non-trivial:
      
        arch/x86/kernel/e820.c:	e820__update_table(boot_params.e820_table, ARRAY_SIZE(boot_params.e820_table), &new_nr);
      
      ... which call updates the E820 table in the zeropage in-situ, and the layout there does not
      match that of 'struct e820_table' (in particular nr_entries is at a different offset,
      hardcoded by the boot protocol).
      
      Simplify all this by introducing a low level __e820__update_table() API that
      the zeropage update call can use, and simplifying the main e820__update_table()
      call signature down to:
      
      	int e820__update_table(struct e820_table *table);
      
      This visibly simplifies all the call sites:
      
        arch/x86/include/asm/e820/api.h:extern int  e820__update_table(struct e820_table *table);
        arch/x86/include/asm/e820/types.h: * call to e820__update_table() to remove duplicates.  The allowance
        arch/x86/kernel/e820.c: * The return value from e820__update_table() is zero if it
        arch/x86/kernel/e820.c:int __init e820__update_table(struct e820_table *table)
        arch/x86/kernel/e820.c:	if (e820__update_table(e820_table))
        arch/x86/kernel/e820.c:	e820__update_table(e820_table_firmware);
        arch/x86/kernel/e820.c:	e820__update_table(e820_table);
        arch/x86/kernel/e820.c:	e820__update_table(e820_table);
        arch/x86/kernel/e820.c:		if (e820__update_table(e820_table) < 0)
        arch/x86/kernel/early-quirks.c:	e820__update_table(e820_table);
        arch/x86/kernel/setup.c:	e820__update_table(e820_table);
        arch/x86/kernel/setup.c:		e820__update_table(e820_table);
        arch/x86/platform/efi/efi.c:	e820__update_table(e820_table);
        arch/x86/xen/setup.c:	e820__update_table(&xen_e820_table);
        arch/x86/xen/setup.c:	e820__update_table(e820_table);
        arch/x86/xen/setup.c:	e820__update_table(&xen_e820_table);
      
      No change in functionality.
      
      Cc: Alex Thorlton <athorlton@sgi.com>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brian Gerst <brgerst@gmail.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Denys Vlasenko <dvlasenk@redhat.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Huang, Ying <ying.huang@intel.com>
      Cc: Josh Poimboeuf <jpoimboe@redhat.com>
      Cc: Juergen Gross <jgross@suse.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Paul Jackson <pj@sgi.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Rafael J. Wysocki <rjw@sisk.pl>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Wei Yang <richard.weiyang@gmail.com>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Cc: linux-kernel@vger.kernel.org
      Signed-off-by: NIngo Molnar <mingo@kernel.org>
      f9748fa0
    • I
      x86/boot/e820: Prefix the E820_* type names with "E820_TYPE_" · 09821ff1
      Ingo Molnar 提交于
      So there's a number of constants that start with "E820" but which
      are not types - these create a confusing mixture when seen together
      with 'enum e820_type' values:
      
      	E820MAP
      	E820NR
      	E820_X_MAX
      	E820MAX
      
      To better differentiate the 'enum e820_type' values prefix them
      with E820_TYPE_.
      
      No change in functionality.
      
      Cc: Alex Thorlton <athorlton@sgi.com>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brian Gerst <brgerst@gmail.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Denys Vlasenko <dvlasenk@redhat.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Huang, Ying <ying.huang@intel.com>
      Cc: Josh Poimboeuf <jpoimboe@redhat.com>
      Cc: Juergen Gross <jgross@suse.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Paul Jackson <pj@sgi.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Rafael J. Wysocki <rjw@sisk.pl>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Wei Yang <richard.weiyang@gmail.com>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Cc: linux-kernel@vger.kernel.org
      Signed-off-by: NIngo Molnar <mingo@kernel.org>
      09821ff1
  19. 28 1月, 2017 9 次提交
    • I
      x86/boot/e820: Create coherent API function names for E820 range operations · ab6bc04c
      Ingo Molnar 提交于
      We have these three related functions:
      
       extern void e820_add_region(u64 start, u64 size, int type);
       extern u64  e820_update_range(u64 start, u64 size, unsigned old_type, unsigned new_type);
       extern u64  e820_remove_range(u64 start, u64 size, unsigned old_type, int checktype);
      
      But it's not clear from the naming that they are 3 operations based around the
      same 'memory range' concept. Rename them to better signal this, and move
      the prototypes next to each other:
      
       extern void e820__range_add   (u64 start, u64 size, int type);
       extern u64  e820__range_update(u64 start, u64 size, unsigned old_type, unsigned new_type);
       extern u64  e820__range_remove(u64 start, u64 size, unsigned old_type, int checktype);
      
      Note that this improved organization of the functions shows another problem that was easy
      to miss before: sometimes the E820 entry type is 'int', sometimes 'unsigned int' - but this
      will be fixed in a separate patch.
      
      No change in functionality.
      
      Cc: Alex Thorlton <athorlton@sgi.com>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brian Gerst <brgerst@gmail.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Denys Vlasenko <dvlasenk@redhat.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Huang, Ying <ying.huang@intel.com>
      Cc: Josh Poimboeuf <jpoimboe@redhat.com>
      Cc: Juergen Gross <jgross@suse.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Paul Jackson <pj@sgi.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Rafael J. Wysocki <rjw@sisk.pl>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Wei Yang <richard.weiyang@gmail.com>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Cc: linux-kernel@vger.kernel.org
      Signed-off-by: NIngo Molnar <mingo@kernel.org>
      ab6bc04c
    • I
      x86/boot/e820: Rename e820_any_mapped()/e820_all_mapped() to e820__mapped_any()/e820__mapped_all() · 3bce64f0
      Ingo Molnar 提交于
      The 'any' and 'all' are modified to the 'mapped' concept, so move them last in the name.
      
      No change in functionality.
      
      Cc: Alex Thorlton <athorlton@sgi.com>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brian Gerst <brgerst@gmail.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Denys Vlasenko <dvlasenk@redhat.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Huang, Ying <ying.huang@intel.com>
      Cc: Josh Poimboeuf <jpoimboe@redhat.com>
      Cc: Juergen Gross <jgross@suse.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Paul Jackson <pj@sgi.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Rafael J. Wysocki <rjw@sisk.pl>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Wei Yang <richard.weiyang@gmail.com>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Cc: linux-kernel@vger.kernel.org
      Signed-off-by: NIngo Molnar <mingo@kernel.org>
      3bce64f0
    • I
      x86/boot/e820: Rename sanitize_e820_table() to e820__update_table() · f52355a9
      Ingo Molnar 提交于
      sanitize_e820_table() is a minor misnomer in that it suggests that
      the E820 table requires sanitizing - which implies that it will only
      do anything if the E820 table is irregular (not sane).
      
      That is wrong, because sanitize_e820_table() also does a very regular
      sorting of the E820 table, which is a necessity in the basic
      append-only flow of E820 updates the kernel is allowed to perform to
      it.
      
      So rename it to e820__update_table() to include that purpose as well.
      
      This also lines up all the table-update functions into a coherent
      naming family:
      
        int  e820__update_table(struct e820_entry *biosmap, int max_nr_map, u32 *pnr_map);
      
        void e820__update_table_print(void);
        void e820__update_table_firmware(void);
      
      No change in functionality.
      
      Cc: Alex Thorlton <athorlton@sgi.com>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brian Gerst <brgerst@gmail.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Denys Vlasenko <dvlasenk@redhat.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Huang, Ying <ying.huang@intel.com>
      Cc: Josh Poimboeuf <jpoimboe@redhat.com>
      Cc: Juergen Gross <jgross@suse.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Paul Jackson <pj@sgi.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Rafael J. Wysocki <rjw@sisk.pl>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Wei Yang <richard.weiyang@gmail.com>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Cc: linux-kernel@vger.kernel.org
      Signed-off-by: NIngo Molnar <mingo@kernel.org>
      f52355a9
    • I
      x86/boot/e820: Harmonize the 'struct e820_table' fields · bf495573
      Ingo Molnar 提交于
      So the e820_table->map and e820_table->nr_map names are a bit
      confusing, because it's not clear what a 'map' really means
      (it could be a bitmap, or some other data structure), nor is
      it clear what nr_map means (is it a current index, or some
      other count).
      
      Rename the fields from:
      
       e820_table->map        =>     e820_table->entries
       e820_table->nr_map     =>     e820_table->nr_entries
      
      which makes it abundantly clear that these are entries
      of the table, and that the size of the table is ->nr_entries.
      
      Propagate the changes to all affected files. Where necessary,
      adjust local variable names to better reflect the new field names.
      
      No change in functionality.
      
      Cc: Alex Thorlton <athorlton@sgi.com>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brian Gerst <brgerst@gmail.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Denys Vlasenko <dvlasenk@redhat.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Huang, Ying <ying.huang@intel.com>
      Cc: Josh Poimboeuf <jpoimboe@redhat.com>
      Cc: Juergen Gross <jgross@suse.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Paul Jackson <pj@sgi.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Rafael J. Wysocki <rjw@sisk.pl>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Wei Yang <richard.weiyang@gmail.com>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Cc: linux-kernel@vger.kernel.org
      Signed-off-by: NIngo Molnar <mingo@kernel.org>
      bf495573
    • I
      x86/boot/e820: Rename everything to e820_table · 61a50101
      Ingo Molnar 提交于
      No change in functionality.
      
      Cc: Alex Thorlton <athorlton@sgi.com>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brian Gerst <brgerst@gmail.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Denys Vlasenko <dvlasenk@redhat.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Huang, Ying <ying.huang@intel.com>
      Cc: Josh Poimboeuf <jpoimboe@redhat.com>
      Cc: Juergen Gross <jgross@suse.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Paul Jackson <pj@sgi.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Rafael J. Wysocki <rjw@sisk.pl>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Wei Yang <richard.weiyang@gmail.com>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Cc: linux-kernel@vger.kernel.org
      Signed-off-by: NIngo Molnar <mingo@kernel.org>
      61a50101
    • I
      x86/boot/e820: Rename 'e820_map' variables to 'e820_array' · acd4c048
      Ingo Molnar 提交于
      In line with the rename to 'struct e820_array', harmonize the naming of common e820
      table variable names as well:
      
       e820          =>  e820_array
       e820_saved    =>  e820_array_saved
       e820_map      =>  e820_array
       initial_e820  =>  e820_array_init
      
      This makes the variable names more consistent  and easier to grep for.
      
      No change in functionality.
      
      Cc: Alex Thorlton <athorlton@sgi.com>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brian Gerst <brgerst@gmail.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Denys Vlasenko <dvlasenk@redhat.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Huang, Ying <ying.huang@intel.com>
      Cc: Josh Poimboeuf <jpoimboe@redhat.com>
      Cc: Juergen Gross <jgross@suse.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Paul Jackson <pj@sgi.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Rafael J. Wysocki <rjw@sisk.pl>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Wei Yang <richard.weiyang@gmail.com>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Cc: linux-kernel@vger.kernel.org
      Signed-off-by: NIngo Molnar <mingo@kernel.org>
      acd4c048
    • I
      x86/boot/e820: Remove spurious asm/e820/api.h inclusions · 5520b7e7
      Ingo Molnar 提交于
      A commonly used lowlevel x86 header, asm/pgtable.h, includes asm/e820/api.h
      spuriously, without making direct use of it.
      
      Removing it is not simple: over the years various .c code learned to rely
      on this indirect inclusion.
      
      Remove the unnecessary include - this should speed up the kernel build a bit,
      as a large header is not included anymore in totally unrelated code.
      
      Cc: Alex Thorlton <athorlton@sgi.com>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brian Gerst <brgerst@gmail.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Denys Vlasenko <dvlasenk@redhat.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Huang, Ying <ying.huang@intel.com>
      Cc: Josh Poimboeuf <jpoimboe@redhat.com>
      Cc: Juergen Gross <jgross@suse.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Paul Jackson <pj@sgi.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Rafael J. Wysocki <rjw@sisk.pl>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Wei Yang <richard.weiyang@gmail.com>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Cc: linux-kernel@vger.kernel.org
      Signed-off-by: NIngo Molnar <mingo@kernel.org>
      5520b7e7
    • I
      x86/boot/e820: Move asm/e820.h to asm/e820/api.h · 66441bd3
      Ingo Molnar 提交于
      In line with asm/e820/types.h, move the e820 API declarations to
      asm/e820/api.h and update all usage sites.
      
      This is just a mechanical, obviously correct move & replace patch,
      there will be subsequent changes to clean up the code and to make
      better use of the new header organization.
      
      Cc: Alex Thorlton <athorlton@sgi.com>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brian Gerst <brgerst@gmail.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Denys Vlasenko <dvlasenk@redhat.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Huang, Ying <ying.huang@intel.com>
      Cc: Josh Poimboeuf <jpoimboe@redhat.com>
      Cc: Juergen Gross <jgross@suse.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Paul Jackson <pj@sgi.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Rafael J. Wysocki <rjw@sisk.pl>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Wei Yang <richard.weiyang@gmail.com>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Cc: linux-kernel@vger.kernel.org
      Signed-off-by: NIngo Molnar <mingo@kernel.org>
      66441bd3
    • J
      x86/efi: Always map the first physical page into the EFI pagetables · bf29bddf
      Jiri Kosina 提交于
      Commit:
      
        12976670 ("x86/efi: Only map RAM into EFI page tables if in mixed-mode")
      
      stopped creating 1:1 mappings for all RAM, when running in native 64-bit mode.
      
      It turns out though that there are 64-bit EFI implementations in the wild
      (this particular problem has been reported on a Lenovo Yoga 710-11IKB),
      which still make use of the first physical page for their own private use,
      even though they explicitly mark it EFI_CONVENTIONAL_MEMORY in the memory
      map.
      
      In case there is no mapping for this particular frame in the EFI pagetables,
      as soon as firmware tries to make use of it, a triple fault occurs and the
      system reboots (in case of the Yoga 710-11IKB this is very early during bootup).
      
      Fix that by always mapping the first page of physical memory into the EFI
      pagetables. We're free to hand this page to the BIOS, as trim_bios_range()
      will reserve the first page and isolate it away from memory allocators anyway.
      
      Note that just reverting 12976670 alone is not enough on v4.9-rc1+ to fix the
      regression on affected hardware, as this commit:
      
         ab72a27d ("x86/efi: Consolidate region mapping logic")
      
      later made the first physical frame not to be mapped anyway.
      Reported-by: NHanka Pavlikova <hanka@ucw.cz>
      Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk>
      Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Borislav Petkov <bp@suse.de>
      Cc: Laura Abbott <labbott@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Vojtech Pavlik <vojtech@ucw.cz>
      Cc: Waiman Long <waiman.long@hpe.com>
      Cc: linux-efi@vger.kernel.org
      Cc: stable@kernel.org # v4.8+
      Fixes: 12976670 ("x86/efi: Only map RAM into EFI page tables if in mixed-mode")
      Link: http://lkml.kernel.org/r/20170127222552.22336-1-matt@codeblueprint.co.uk
      [ Tidied up the changelog and the comment. ]
      Signed-off-by: NIngo Molnar <mingo@kernel.org>
      bf29bddf
  20. 14 1月, 2017 1 次提交
    • P
      efi/x86: Prune invalid memory map entries and fix boot regression · 0100a3e6
      Peter Jones 提交于
      Some machines, such as the Lenovo ThinkPad W541 with firmware GNET80WW
      (2.28), include memory map entries with phys_addr=0x0 and num_pages=0.
      
      These machines fail to boot after the following commit,
      
        commit 8e80632f ("efi/esrt: Use efi_mem_reserve() and avoid a kmalloc()")
      
      Fix this by removing such bogus entries from the memory map.
      
      Furthermore, currently the log output for this case (with efi=debug)
      looks like:
      
       [    0.000000] efi: mem45: [Reserved           |   |  |  |  |  |  |  |  |  |  |  |  ] range=[0x0000000000000000-0xffffffffffffffff] (0MB)
      
      This is clearly wrong, and also not as informative as it could be.  This
      patch changes it so that if we find obviously invalid memory map
      entries, we print an error and skip those entries.  It also detects the
      display of the address range calculation overflow, so the new output is:
      
       [    0.000000] efi: [Firmware Bug]: Invalid EFI memory map entries:
       [    0.000000] efi: mem45: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
      
      It also detects memory map sizes that would overflow the physical
      address, for example phys_addr=0xfffffffffffff000 and
      num_pages=0x0200000000000001, and prints:
      
       [    0.000000] efi: [Firmware Bug]: Invalid EFI memory map entries:
       [    0.000000] efi: mem45: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[phys_addr=0xfffffffffffff000-0x20ffffffffffffffff] (invalid)
      
      It then removes these entries from the memory map.
      Signed-off-by: NPeter Jones <pjones@redhat.com>
      Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
      [ardb: refactor for clarity with no functional changes, avoid PAGE_SHIFT]
      Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk>
      [Matt: Include bugzilla info in commit log]
      Cc: <stable@vger.kernel.org> # v4.9+
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Link: https://bugzilla.kernel.org/show_bug.cgi?id=191121Signed-off-by: NIngo Molnar <mingo@kernel.org>
      0100a3e6
  21. 07 1月, 2017 1 次提交
    • N
      x86/efi: Don't allocate memmap through memblock after mm_init() · 20b1e22d
      Nicolai Stange 提交于
      With the following commit:
      
        4bc9f92e ("x86/efi-bgrt: Use efi_mem_reserve() to avoid copying image data")
      
      ...  efi_bgrt_init() calls into the memblock allocator through
      efi_mem_reserve() => efi_arch_mem_reserve() *after* mm_init() has been called.
      
      Indeed, KASAN reports a bad read access later on in efi_free_boot_services():
      
        BUG: KASAN: use-after-free in efi_free_boot_services+0xae/0x24c
                  at addr ffff88022de12740
        Read of size 4 by task swapper/0/0
        page:ffffea0008b78480 count:0 mapcount:-127
        mapping:          (null) index:0x1 flags: 0x5fff8000000000()
        [...]
        Call Trace:
         dump_stack+0x68/0x9f
         kasan_report_error+0x4c8/0x500
         kasan_report+0x58/0x60
         __asan_load4+0x61/0x80
         efi_free_boot_services+0xae/0x24c
         start_kernel+0x527/0x562
         x86_64_start_reservations+0x24/0x26
         x86_64_start_kernel+0x157/0x17a
         start_cpu+0x5/0x14
      
      The instruction at the given address is the first read from the memmap's
      memory, i.e. the read of md->type in efi_free_boot_services().
      
      Note that the writes earlier in efi_arch_mem_reserve() don't splat because
      they're done through early_memremap()ed addresses.
      
      So, after memblock is gone, allocations should be done through the "normal"
      page allocator. Introduce a helper, efi_memmap_alloc() for this. Use
      it from efi_arch_mem_reserve(), efi_free_boot_services() and, for the sake
      of consistency, from efi_fake_memmap() as well.
      
      Note that for the latter, the memmap allocations cease to be page aligned.
      This isn't needed though.
      Tested-by: NDan Williams <dan.j.williams@intel.com>
      Signed-off-by: NNicolai Stange <nicstange@gmail.com>
      Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
      Cc: <stable@vger.kernel.org> # v4.9
      Cc: Dave Young <dyoung@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Matt Fleming <matt@codeblueprint.co.uk>
      Cc: Mika Penttilä <mika.penttila@nextfour.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: linux-efi@vger.kernel.org
      Fixes: 4bc9f92e ("x86/efi-bgrt: Use efi_mem_reserve() to avoid copying image data")
      Link: http://lkml.kernel.org/r/20170105125130.2815-1-nicstange@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      20b1e22d
  22. 13 11月, 2016 2 次提交
    • M
      x86/efi: Prevent mixed mode boot corruption with CONFIG_VMAP_STACK=y · f6697df3
      Matt Fleming 提交于
      Booting an EFI mixed mode kernel has been crashing since commit:
      
        e37e43a4 ("x86/mm/64: Enable vmapped stacks (CONFIG_HAVE_ARCH_VMAP_STACK=y)")
      
      The user-visible effect in my test setup was the kernel being unable
      to find the root file system ramdisk. This was likely caused by silent
      memory or page table corruption.
      
      Enabling CONFIG_DEBUG_VIRTUAL=y immediately flagged the thunking code as
      abusing virt_to_phys() because it was passing addresses that were not
      part of the kernel direct mapping.
      
      Use the slow version instead, which correctly handles all memory
      regions by performing a page table walk.
      Suggested-by: NAndy Lutomirski <luto@amacapital.net>
      Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brian Gerst <brgerst@gmail.com>
      Cc: Denys Vlasenko <dvlasenk@redhat.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Josh Poimboeuf <jpoimboe@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: linux-efi@vger.kernel.org
      Link: http://lkml.kernel.org/r/20161112210424.5157-3-matt@codeblueprint.co.ukSigned-off-by: NIngo Molnar <mingo@kernel.org>
      f6697df3
    • B
      x86/efi: Fix EFI memmap pointer size warning · 02e56902
      Borislav Petkov 提交于
      Fix this when building on 32-bit:
      
        arch/x86/platform/efi/efi.c: In function ‘__efi_enter_virtual_mode’:
        arch/x86/platform/efi/efi.c:911:5: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
             (efi_memory_desc_t *)pa);
             ^
        arch/x86/platform/efi/efi.c:918:5: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
             (efi_memory_desc_t *)pa);
             ^
      
      The @pa local variable is declared as phys_addr_t and that is a u64 when
      CONFIG_PHYS_ADDR_T_64BIT=y. (The last is enabled on 32-bit on a PAE
      build.)
      
      However, its value comes from __pa() which is basically doing pointer
      arithmetic and checking, and returns unsigned long as it is the native
      pointer width.
      
      So let's use an unsigned long too. It should be fine to do so because
      the later users cast it to a pointer too.
      Signed-off-by: NBorislav Petkov <bp@suse.de>
      Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brian Gerst <brgerst@gmail.com>
      Cc: Denys Vlasenko <dvlasenk@redhat.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Josh Poimboeuf <jpoimboe@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: linux-efi@vger.kernel.org
      Link: http://lkml.kernel.org/r/20161112210424.5157-2-matt@codeblueprint.co.ukSigned-off-by: NIngo Molnar <mingo@kernel.org>
      02e56902
  23. 21 9月, 2016 1 次提交