This removes the requirement for callers to get_cpu() to check in simple
cases.

Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This removes the requirement for callers to get_cpu() to check in simple
cases.

Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

CPU_DYING is notified in atomic context, so no taking mutexes here.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

CPU_DYING is called in atomic context, so don't try to take any locks.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

KVM wants a notification when a cpu is about to die, so it can disable
hardware extensions, but at a time when user processes cannot be scheduled
on the cpu, so it doesn't try to use virtualization extensions after they
have been disabled.

This adds a CPU_DYING notification.  The notification is called in atomic
context on the doomed cpu.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Remove unnecessary ones, and rearange the remaining in the standard order.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

kvm uses a pseudo filesystem, kvmfs, to generate inodes, a job that the
new anonymous inodes source does much better.

Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch adds an implementation to the svm is_disabled function to
detect reliably if the BIOS disabled the SVM feature in the CPU. This
fixes the issues with kernel panics when loading the kvm-amd module on
machines where SVM is available but disabled.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

A vmexit implicitly flushes the tlb; the code is bogus.

Noted by Shaohua Li.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Need to flush the tlb after updating a pte, not before.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Protected mode code may have corrupted the real-mode tss, so re-initialize
it when switching to real mode.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

When writing to normal memory and the memory area is unchanged the write
can be safely skipped, avoiding the costly kvm_mmu_pte_write.
Signed-Off-By: NLuca Tettamanti <kronos.it@gmail.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

When the old value and new one are the same the emulator skips the
write; this is undesirable when the destination is a MMIO area and the
write shall be performed regardless of the previous value. This
optimization breaks e.g. a Linux guest APIC compiled without
X86_GOOD_APIC.

Remove the check and perform the writeback stage in the emulation unless
it's explicitly disabled (currently push and some 2 bytes instructions
may disable the writeback).
Signed-Off-By: NLuca Tettamanti <kronos.it@gmail.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Useful for the PIC and PIT.
Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

With kernel-injected interrupts, we need to check for interrupts on
lightweight exits too.
Signed-off-by: NGregory Haskins <ghaskins@novell.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NGregory Haskins <ghaskins@novell.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NNitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

For use in real mode.
Signed-off-by: NNitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

If the time stamp counter goes backwards, a guest delay loop can become
infinite.  This can happen if a vcpu is migrated to another cpu, where
the counter has a lower value than the first cpu.

Since we're doing an IPI to the first cpu anyway, we can use that to pick
up the old tsc, and use that to calculate the adjustment we need to make
to the tsc offset.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Needs to be set on vcpu 0 only.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NShani Moideen <shani.moideen@wipro.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NShani Moideen <shani.moideen@wipro.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

When a vcpu causes a shadow tlb entry to have reduced permissions, it
must also clear the tlb on remote vcpus.  We do that by:

- setting a bit on the vcpu that requests a tlb flush before the next entry
- if the vcpu is currently executing, we send an ipi to make sure it
  exits before we continue
Signed-off-by: NAvi Kivity <avi@qumranet.com>

That way, we don't need to loop for KVM_MAX_VCPUS for a single vcpu
vm.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This has two use cases: the bios can't boot from disk, and guest smp
bootstrap.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Will soon have a thid user.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

As we don't support guest tlb shootdown yet, this is only reliable
for real-mode guests.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

If we add the vm once per vcpu, we corrupt the list if the guest has
multiple vcpus.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

A vcpu can pin up to four mmu shadow pages, which means the freeing
loop will never terminate.  Fix by first unpinning shadow pages on
all vcpus, then freeing shadow pages.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Switch guest paging context may require us to allocate memory, which
might fail.  Instead of wiring up error paths everywhere, make context
switching lazy and actually do the switch before the next guest entry,
where we can return an error if allocation fails.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This has not been used for some time, as the same information is available
in the page header.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This was once used to avoid accessing the guest pte when upgrading
the shadow pte from read-only to read-write.  But usually we need
to set the guest pte dirty or accessed bits anyway, so this wasn't
really exploited.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Always set the accessed and dirty bit (since having them cleared causes
a read-modify-write cycle), always set the present bit, and copy the
nx bit from the guest.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

No longer needed as we do everything in one place.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NAvi Kivity <avi@qumranet.com>

With guest smp, a second vcpu might see partial updates when the first
vcpu services a page fault.  So delay all updates until we have figured
out what the pte should look like.

Note that on i386, this is still not completely atomic as a 64-bit write
will be split into two on a 32-bit machine.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

We want all shadow pte modifications in one place.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This prevents some work from being performed twice, and, more importantly,
reduces the number of places where we modify shadow ptes.
Signed-off-by: NAvi Kivity <avi@qumranet.com>