Atm we call intel_display_power_enabled() from
i915_capture_error_state() in IRQ context and then take a mutex. To fix
this add a new intel_display_power_enabled_sw() which returns the domain
state based on software tracking as opposed to reading the actual HW
state.

Since we use domain_use_count for this without locking on the reader
side make sure we increase the counter only after enabling all required
power wells and decrease it before disabling any of these power wells.

Regression introduced in
commit 1b02383464b4a915627ef3b8fd0ad7f07168c54c
Author: Imre Deak <imre.deak@intel.com>
Date:   Tue Sep 24 16:17:09 2013 +0300

    drm/i915: support for multiple power wells

Note that atm we depend on the value returned by
intel_display_power_enabled_sw() in i915_capture_error_state() to avoid
unclaimed register access reports. This was never guaranteed though,
since another thread can disable the power concurrently. If this is a
problem we need another explicit way to disable the reporting during
error captures.

v2:
- remove barriers as the caller can't depend on the value
  returned from i915_capture_error_state_sw() anyway (Ville)
- dump the state of pipe/transcoder power domain state (Daniel)
Reported-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This should just be a debug.  Add another debug msg to the inherit path
while we're at it.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72098Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Setting this bit restores all ring contexts in parallel rather than
serially.  Matches current BWG recommendations.
Tested-by: N"Meng, Mengmeng" <mengmeng.meng@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NDeepak S <deepak.s@inel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We use timeout mode, and we need to lower the timeout to get good RC6
residency when loads are running.  This gets me from 0% residency during
glxgears to 77%, which is a pretty good improvement.  This value also
matches the current BWG recommentations.
Tested-by: N"Meng, Mengmeng" <mengmeng.meng@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NDeepak S <deepak.s@inel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It leads to a big mess when stuff interleaves. Especially with the new
patch I've submitted for the drm core to no longer artificially split
up debug messages.

v2: The size parameter to snprintf includes the terminating 0, but the
return value does not. Adjust the logic accordingly. Spotted by Mika.

Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It doesn't like that we assign 0 to a pointer, it wants the real NULL.

On closer look that initialization is actually bogus, and the compiler
can easily see that we never use it unitialized. So let's just drop
this.

Cc: Deepak S <deepak.s@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This was fumbled in the conversion to per-engine forcewake.

Cc: Deepak S <deepak.s@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On VLV the GTFIFOCTL register has other bits besides the number of free
entries in the GT wake FIFO. Apply a mask when we read th register to
make sure we don't misinterpret the number of free FIFO entries.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
[danvet: There's some unclarity about hsw, but brushed off as todays'
Bspec just acting up a bit.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On VLV GTFIFODBG has more bits. Just report them all.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Forcewake counts for valleyview are not exposed throgh DebugFS.
Exposing with this change.
Signed-off-by: NDeepak S <deepak.s@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Split vlv force wake routines to help individually control Media/Render
well based on the register access.

We've seen power savings in the lower sub-1W range on workloads that
only need on of the power wells, e.g. glbenchmark, media playback

Note: The same split isn't there for the forcewake queue, only the
forcwake domains are split.
Signed-off-by: NDeepak S <deepak.s@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Rebase on top of the removed forcewake hack in the ring irq
get/put code and add a note to add Deepak's answer to Chris question.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Added power well arguments to all the force wake routines
to help us individually control power well based on the
scenario.
Signed-off-by: NDeepak S <deepak.s@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Resolve conflict with the removed forcewake hack and drop one
spurious hunk Jesse noticed.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Due to user fudging (for instance using video=VGA-1:e with FBDEV=n) we can
attempt to reset an inconsistent CRTC that is marked as active but has
no assigned fb. It would be wise to fix this earlier, but the long
term plan is to have primary and secondary planes associated with a
CRTC, in which crtc->fb being NULL will be expected. So for a quick
short term fix with pretensions of grandeur, just check for a NULL fb
during GPU reset and ignore the plane restoration.

This fixes a potential hard hang (a panic in the panic handler)
following a GPU hang.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Add a corresponding fixme comment.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add a debugfs entry showing the use-count for all power domains of each
power well.

v3: address comments from Paulo:
- simplify power_domain_str() by using a switch table
- move power_well::domain_count to power_domains
- WARN_ON decrementing a 0 refcount
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

So far we distinguished platforms without a dynamic power well with
the HAS_POWER_WELL macro and for such platforms we didn't call any power
domain functions. Instead of doing this check we can add an always-on
power well for these platforms and call the power domain functions
unconditionally. For always-on power wells we only increase/decrease
their refcounts, otherwise they are nop.

This makes high level driver code more readable and as a bonus provides
some idea of the current power domains state for all platforms (once
the relevant debugfs entry is added).

v3: rename intel_power_wells to i9xx_always_on_power_well (Paulo)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This may need work if other platforms do the same thing, but in the
meantime we should avoid looking at HSW specific bits in this generic
function.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
[added IS_BROADWELL too as that needs the same handling (Imre)]
Signed-off-by: NImre Deak <imre.deak@intel.com>
[danvet: Add Imre's missing sob.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In intel_display_capture_error_state we use HAS_POWER_WELL to check if
we are running on Haswell/Broadwell when accessing HSW_PWR_WELL_DRIVER
which is specific to these platforms. Future platforms with power wells
don't have this register, so HAS_POWER_WELL won't work there any more.
Use IS_HASWELL/IS_BROADWELL instead.

v3: fix using logical || instead of bitwise | (Paulo)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Instead of using a separate function to check whether a power domain is
is always on, add an always-on power well covering all these power
domains and do the usual get/put on these unconditionally. Since we
don't assign a .set handler for these the get/put won't have any effect
besides the adjusted refcount.

This makes the code more readable and provides debug info also on the
use of always-on power wells (once the relevant debugfs entry is added.)

v3: make is_always_on to be bool instead of a bit field (Paulo)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

HW generations so far had only one always-on power well and optionally
one dynamic power well. Upcoming HW gens may have multiple dynamic power
wells, so add some infrastructure to support them.

The idea is to keep the existing power domain API used by the rest of
the driver and create a mapping between these power domains and the
underlying power wells. This mapping can differ from one HW to another
but high level driver code doesn't need to know about this. Through the
existing get/put API it would just ask for a given power domain and the
power domain framework would make sure the relevant power wells get
enabled in the right order.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This way the code is simpler and can also be used for other platforms
where the audio power domain->power well mapping is different.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If we use a stolen buffer, our probe callback shouldn't allocate a new
buffer; we should re-use the one from the BIOS instead if possible.

v2: fix locking (Jesse)
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

I believe, and an evening of i-g-t, that our original workaround for the
missed interrupts on Sandybridge, that of holding forcewake whilst we
wait for an interrupts, is no longer required. This leaves us dependent
on the second workaround of forcing an UC read of the ACTHD before
reading back the seqno from the snooped HWS. Dropping the forcewake
should allow us to conserve a little power, not much as the GPU is meant
to be busy whilst we wait for it!

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Our VM code already has a cleanup function, and this is a nice place to
put the drm_mm_takedown. This should have no functional impact, it just
leaves the unload function a bit cleaer, and is more logical IMO
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This belonged in
commit 07fe0b12
Author: Ben Widawsky <ben@bwidawsk.net>
Date:   Wed Jul 31 17:00:10 2013 -0700

    drm/i915: plumb VM into bind/unbind code

But it was somehow missed along the way.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

i915_gem_execbuffer_relocate became defunct in:
commit 27173f1f
Author: Ben Widawsky <ben@bwidawsk.net>
Date:   Wed Aug 14 11:38:36 2013 +0200

    drm/i915: Convert execbuf code to use vmas

eb_create: never used?
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
[danvet: The lingering vm parameter to eb_create might have been back
from the days where we didn't yet keep both vmas and obj lists in the
eb struct. But I didn't check really.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Many tests call this ad naseum now (in an infinite loop, very often).
It clutters the logs. Actually, I'd rather drop it completely...

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This would have never worked.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This should really have been added in BDW integration, as well as:

commit 93bd8649
Author: Ben Widawsky <ben@bwidawsk.net>
Date:   Tue Jul 16 16:50:06 2013 -0700

    drm/i915: Put the mm in the parent address space

It didn't really matter before, but it will in the future.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When we fail for some reason on loading the PDPs, it would be wise to
disable the PPGTT in the ring registers. If we do not do this, we have
undefined results.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

SNB has another register where the actual FBC CPU fence number is
stored. The documenation explicitly states that the fence number
in DPFC_CTL must be 0 on SNB. And in fact when it's not zero,
the GTT tracking simply doesn't work.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Oops, makes testing early boot failures in i915.ko a bit more pain, so
let's fix it.

v2: We already have a bit of static storage to track this (Chris).
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Too many t's.

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

gcc complains that:

drivers/gpu/drm/i915/i915_debugfs.c: In function ‘display_crc_ctl_write’:
drivers/gpu/drm/i915/i915_debugfs.c:2393:2: warning: ‘val’ may be used uninitialized in this function [-Wuninitialized]
drivers/gpu/drm/i915/i915_debugfs.c:2350:6: note: ‘val’ was declared here

but it can't see that we're going to use val only in the success case.
So shut it up.

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We need to hold the pc8 lock around toggling the value of gpu_idle.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We send the primary and cursor plane data through the gamma unit.
In order to get matching output from sprites, also send the sprite
data through the gamma unit.

In the future we should add some properties to control this
explicitly, and also add properties for the per-sprite gamma ramps
what have you, but for now this seems like a reasonable thing to do.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

All the other .enable_fbc() funcs use plane_name(). Make
gen7_enable_fbc() do the same.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

At least since SNB (perhaps even earlier) even the desktop parts
should have FBC.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The spec tells us that we need to emit an SRM after the LRI
to MSG_FBC_REND_STATE.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>