1. 02 7月, 2015 9 次提交
    • L
      Btrfs: fix warning of bytes_may_use · ddba1bfc
      Liu Bo 提交于
      While running generic/019, dmesg got several warnings from
      btrfs_free_reserved_data_space().
      
      Test generic/019 produces some disk failures so sumbit dio will get errors,
      in which case, btrfs_direct_IO() goes to the error handling and free
      bytes_may_use, but the problem is that bytes_may_use has been free'd
      during get_block().
      
      This adds a runtime flag to show if we've gone through get_block(), if so,
      don't do the cleanup work.
      Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
      Reviewed-by: NFilipe Manana <fdmanana@suse.com>
      Tested-by: NFilipe Manana <fdmanana@suse.com>
      Signed-off-by: NChris Mason <clm@fb.com>
      ddba1bfc
    • L
      Btrfs: fix hang when failing to submit bio of directIO · ad9ee205
      Liu Bo 提交于
      The hang is uncoverd by generic/019.
      
      btrfs_endio_direct_write() skips the "finish_ordered_fn" part when it hits
      an error, thus those added ordered extents will never get processed, which
      block processes that waiting for them via btrfs_start_ordered_extent().
      
      This fixes the above, and meanwhile finish_ordered_fn will do the space
      accounting work.
      Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
      Reviewed-by: NFilipe Manana <fdmanana@suse.com>
      Tested-by: NFilipe Manana <fdmanana@suse.com>
      Signed-off-by: NChris Mason <clm@fb.com>
      ad9ee205
    • F
      Btrfs: fix a comment in inode.c:evict_inode_truncate_pages() · 9c6429d9
      Filipe Manana 提交于
      The comment was not correct about the part where it says the endio
      callback of the bio might have not yet been called - update it
      to mention that by that time the endio callback execution might
      still be in progress only.
      Signed-off-by: NFilipe Manana <fdmanana@suse.com>
      Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
      Signed-off-by: NChris Mason <clm@fb.com>
      9c6429d9
    • F
      Btrfs: fix memory corruption on failure to submit bio for direct IO · 61de718f
      Filipe Manana 提交于
      If we fail to submit a bio for a direct IO request, we were grabbing the
      corresponding ordered extent and decrementing its reference count twice,
      once for our lookup reference and once for the ordered tree reference.
      This was a problem because it caused the ordered extent to be freed
      without removing it from the ordered tree and any lists it might be
      attached to, leaving dangling pointers to the ordered extent around.
      Example trace with CONFIG_DEBUG_PAGEALLOC=y:
      
      [161779.858707] BUG: unable to handle kernel paging request at 0000000087654330
      [161779.859983] IP: [<ffffffff8124ca68>] rb_prev+0x22/0x3b
      [161779.860636] PGD 34d818067 PUD 0
      [161779.860636] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
      (...)
      [161779.860636] Call Trace:
      [161779.860636]  [<ffffffffa06b36a6>] __tree_search+0xd9/0xf9 [btrfs]
      [161779.860636]  [<ffffffffa06b3708>] tree_search+0x42/0x63 [btrfs]
      [161779.860636]  [<ffffffffa06b4868>] ? btrfs_lookup_ordered_range+0x2d/0xa5 [btrfs]
      [161779.860636]  [<ffffffffa06b4873>] btrfs_lookup_ordered_range+0x38/0xa5 [btrfs]
      [161779.860636]  [<ffffffffa06aab8e>] btrfs_get_blocks_direct+0x11b/0x615 [btrfs]
      [161779.860636]  [<ffffffff8119727f>] do_blockdev_direct_IO+0x5ff/0xb43
      [161779.860636]  [<ffffffffa06aaa73>] ? btrfs_page_exists_in_range+0x1ad/0x1ad [btrfs]
      [161779.860636]  [<ffffffffa06a2c9a>] ? btrfs_get_extent_fiemap+0x1bc/0x1bc [btrfs]
      [161779.860636]  [<ffffffff811977f5>] __blockdev_direct_IO+0x32/0x34
      [161779.860636]  [<ffffffffa06a2c9a>] ? btrfs_get_extent_fiemap+0x1bc/0x1bc [btrfs]
      [161779.860636]  [<ffffffffa06a10ae>] btrfs_direct_IO+0x198/0x21f [btrfs]
      [161779.860636]  [<ffffffffa06a2c9a>] ? btrfs_get_extent_fiemap+0x1bc/0x1bc [btrfs]
      [161779.860636]  [<ffffffff81112ca1>] generic_file_direct_write+0xb3/0x128
      [161779.860636]  [<ffffffffa06affaa>] ? btrfs_file_write_iter+0x15f/0x3e0 [btrfs]
      [161779.860636]  [<ffffffffa06b004c>] btrfs_file_write_iter+0x201/0x3e0 [btrfs]
      (...)
      
      We were also not freeing the btrfs_dio_private we allocated previously,
      which kmemleak reported with the following trace in its sysfs file:
      
      unreferenced object 0xffff8803f553bf80 (size 96):
        comm "xfs_io", pid 4501, jiffies 4295039588 (age 173.936s)
        hex dump (first 32 bytes):
          88 6c 9b f5 02 88 ff ff 00 00 00 00 00 00 00 00  .l..............
          00 00 00 00 00 00 00 00 00 00 c4 00 00 00 00 00  ................
        backtrace:
          [<ffffffff81161ffe>] create_object+0x172/0x29a
          [<ffffffff8145870f>] kmemleak_alloc+0x25/0x41
          [<ffffffff81154e64>] kmemleak_alloc_recursive.constprop.40+0x16/0x18
          [<ffffffff811579ed>] kmem_cache_alloc_trace+0xfb/0x148
          [<ffffffffa03d8cff>] btrfs_submit_direct+0x65/0x16a [btrfs]
          [<ffffffff811968dc>] dio_bio_submit+0x62/0x8f
          [<ffffffff811975fe>] do_blockdev_direct_IO+0x97e/0xb43
          [<ffffffff811977f5>] __blockdev_direct_IO+0x32/0x34
          [<ffffffffa03d70ae>] btrfs_direct_IO+0x198/0x21f [btrfs]
          [<ffffffff81112ca1>] generic_file_direct_write+0xb3/0x128
          [<ffffffffa03e604d>] btrfs_file_write_iter+0x201/0x3e0 [btrfs]
          [<ffffffff8116586a>] __vfs_write+0x7c/0xa5
          [<ffffffff81165da9>] vfs_write+0xa0/0xe4
          [<ffffffff81166675>] SyS_pwrite64+0x64/0x82
          [<ffffffff81464fd7>] system_call_fastpath+0x12/0x6f
          [<ffffffffffffffff>] 0xffffffffffffffff
      
      For read requests we weren't doing any cleanup either (none of the work
      done by btrfs_endio_direct_read()), so a failure submitting a bio for a
      read request would leave a range in the inode's io_tree locked forever,
      blocking any future operations (both reads and writes) against that range.
      
      So fix this by making sure we do the same cleanup that we do for the case
      where the bio submission succeeds.
      Signed-off-by: NFilipe Manana <fdmanana@suse.com>
      Signed-off-by: NChris Mason <clm@fb.com>
      61de718f
    • M
      btrfs: don't update mtime/ctime on deduped inodes · 1c919a5e
      Mark Fasheh 提交于
      One issue users have reported is that dedupe changes mtime on files,
      resulting in tools like rsync thinking that their contents have changed when
      in fact the data is exactly the same. We also skip the ctime update as no
      user-visible metadata changes here and we want dedupe to be transparent to
      the user.
      
      Clone still wants time changes, so we special case this in the code.
      
      This was tested with the btrfs-extent-same tool.
      Signed-off-by: NMark Fasheh <mfasheh@suse.de>
      Signed-off-by: NChris Mason <clm@fb.com>
      1c919a5e
    • M
      btrfs: allow dedupe of same inode · 0efa9f48
      Mark Fasheh 提交于
      clone() supports cloning within an inode so extent-same can do
      the same now. This patch fixes up the locking in extent-same to
      know about the single-inode case. In addition to that, we add a
      check for overlapping ranges, which clone does not allow.
      Signed-off-by: NMark Fasheh <mfasheh@suse.de>
      Reviewed-by: NDavid Sterba <dsterba@suse.cz>
      Signed-off-by: NChris Mason <clm@fb.com>
      0efa9f48
    • M
      btrfs: fix deadlock with extent-same and readpage · f4414602
      Mark Fasheh 提交于
      ->readpage() does page_lock() before extent_lock(), we do the opposite in
      extent-same. We want to reverse the order in btrfs_extent_same() but it's
      not quite straightforward since the page locks are taken inside btrfs_cmp_data().
      
      So I split btrfs_cmp_data() into 3 parts with a small context structure that
      is passed between them. The first, btrfs_cmp_data_prepare() gathers up the
      pages needed (taking page lock as required) and puts them on our context
      structure. At this point, we are safe to lock the extent range. Afterwards,
      we use btrfs_cmp_data() to do the data compare as usual and btrfs_cmp_data_free()
      to clean up our context.
      Signed-off-by: NMark Fasheh <mfasheh@suse.de>
      Reviewed-by: NDavid Sterba <dsterba@suse.cz>
      Signed-off-by: NChris Mason <clm@fb.com>
      f4414602
    • M
      btrfs: pass unaligned length to btrfs_cmp_data() · 207910dd
      Mark Fasheh 提交于
      In the case that we dedupe the tail of a file, we might expand the dedupe
      len out to the end of our last block. We don't want to compare data past
      i_size however, so pass the original length to btrfs_cmp_data().
      Signed-off-by: NMark Fasheh <mfasheh@suse.de>
      Reviewed-by: NDavid Sterba <dsterba@suse.cz>
      Signed-off-by: NChris Mason <clm@fb.com>
      207910dd
    • F
      Btrfs: fix fsync after truncate when no_holes feature is enabled · a89ca6f2
      Filipe Manana 提交于
      When we have the no_holes feature enabled, if a we truncate a file to a
      smaller size, truncate it again but to a size greater than or equals to
      its original size and fsync it, the log tree will not have any information
      about the hole covering the range [truncate_1_offset, new_file_size[.
      Which means if the fsync log is replayed, the file will remain with the
      state it had before both truncate operations.
      
      Without the no_holes feature this does not happen, since when the inode
      is logged (full sync flag is set) it will find in the fs/subvol tree a
      leaf with a generation matching the current transaction id that has an
      explicit extent item representing the hole.
      
      Fix this by adding an explicit extent item representing a hole between
      the last extent and the inode's i_size if we are doing a full sync.
      
      The issue is easy to reproduce with the following test case for fstests:
      
        . ./common/rc
        . ./common/filter
        . ./common/dmflakey
      
        _need_to_be_root
        _supported_fs generic
        _supported_os Linux
        _require_scratch
        _require_dm_flakey
      
        # This test was motivated by an issue found in btrfs when the btrfs
        # no-holes feature is enabled (introduced in kernel 3.14). So enable
        # the feature if the fs being tested is btrfs.
        if [ $FSTYP == "btrfs" ]; then
            _require_btrfs_fs_feature "no_holes"
            _require_btrfs_mkfs_feature "no-holes"
            MKFS_OPTIONS="$MKFS_OPTIONS -O no-holes"
        fi
      
        rm -f $seqres.full
      
        _scratch_mkfs >>$seqres.full 2>&1
        _init_flakey
        _mount_flakey
      
        # Create our test files and make sure everything is durably persisted.
        $XFS_IO_PROG -f -c "pwrite -S 0xaa 0 64K"         \
                        -c "pwrite -S 0xbb 64K 61K"       \
                        $SCRATCH_MNT/foo | _filter_xfs_io
        $XFS_IO_PROG -f -c "pwrite -S 0xee 0 64K"         \
                        -c "pwrite -S 0xff 64K 61K"       \
                        $SCRATCH_MNT/bar | _filter_xfs_io
        sync
      
        # Now truncate our file foo to a smaller size (64Kb) and then truncate
        # it to the size it had before the shrinking truncate (125Kb). Then
        # fsync our file. If a power failure happens after the fsync, we expect
        # our file to have a size of 125Kb, with the first 64Kb of data having
        # the value 0xaa and the second 61Kb of data having the value 0x00.
        $XFS_IO_PROG -c "truncate 64K" \
                     -c "truncate 125K" \
                     -c "fsync" \
                     $SCRATCH_MNT/foo
      
        # Do something similar to our file bar, but the first truncation sets
        # the file size to 0 and the second truncation expands the size to the
        # double of what it was initially.
        $XFS_IO_PROG -c "truncate 0" \
                     -c "truncate 253K" \
                     -c "fsync" \
                     $SCRATCH_MNT/bar
      
        _load_flakey_table $FLAKEY_DROP_WRITES
        _unmount_flakey
      
        # Allow writes again, mount to trigger log replay and validate file
        # contents.
        _load_flakey_table $FLAKEY_ALLOW_WRITES
        _mount_flakey
      
        # We expect foo to have a size of 125Kb, the first 64Kb of data all
        # having the value 0xaa and the remaining 61Kb to be a hole (all bytes
        # with value 0x00).
        echo "File foo content after log replay:"
        od -t x1 $SCRATCH_MNT/foo
      
        # We expect bar to have a size of 253Kb and no extents (any byte read
        # from bar has the value 0x00).
        echo "File bar content after log replay:"
        od -t x1 $SCRATCH_MNT/bar
      
        status=0
        exit
      
      The expected file contents in the golden output are:
      
        File foo content after log replay:
        0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
        *
        0200000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        *
        0372000
        File bar content after log replay:
        0000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        *
        0772000
      
      Without this fix, their contents are:
      
        File foo content after log replay:
        0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
        *
        0200000 bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb
        *
        0372000
        File bar content after log replay:
        0000000 ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee
        *
        0200000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
        *
        0372000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        *
        0772000
      
      A test case submission for fstests follows soon.
      Signed-off-by: NFilipe Manana <fdmanana@suse.com>
      Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
      Signed-off-by: NChris Mason <clm@fb.com>
      a89ca6f2
  2. 01 7月, 2015 9 次提交
    • F
      Btrfs: fix fsync xattr loss in the fast fsync path · 36283bf7
      Filipe Manana 提交于
      After commit 4f764e51 ("Btrfs: remove deleted xattrs on fsync log
      replay"), we can end up in a situation where during log replay we end up
      deleting xattrs that were never deleted when their file was last fsynced.
      
      This happens in the fast fsync path (flag BTRFS_INODE_NEEDS_FULL_SYNC is
      not set in the inode) if the inode has the flag BTRFS_INODE_COPY_EVERYTHING
      set, the xattr was added in a past transaction and the leaf where the
      xattr is located was not updated (COWed or created) in the current
      transaction. In this scenario the xattr item never ends up in the log
      tree and therefore at log replay time, which makes the replay code delete
      the xattr from the fs/subvol tree as it thinks that xattr was deleted
      prior to the last fsync.
      
      Fix this by always logging all xattrs, which is the simplest and most
      reliable way to detect deleted xattrs and replay the deletes at log replay
      time.
      
      This issue is reproducible with the following test case for fstests:
      
        seq=`basename $0`
        seqres=$RESULT_DIR/$seq
        echo "QA output created by $seq"
      
        here=`pwd`
        tmp=/tmp/$$
        status=1	# failure is the default!
      
        _cleanup()
        {
            _cleanup_flakey
            rm -f $tmp.*
        }
        trap "_cleanup; exit \$status" 0 1 2 3 15
      
        # get standard environment, filters and checks
        . ./common/rc
        . ./common/filter
        . ./common/dmflakey
        . ./common/attr
      
        # real QA test starts here
      
        # We create a lot of xattrs for a single file. Only btrfs and xfs are currently
        # able to store such a large mount of xattrs per file, other filesystems such
        # as ext3/4 and f2fs for example, fail with ENOSPC even if we attempt to add
        # less than 1000 xattrs with very small values.
        _supported_fs btrfs xfs
        _supported_os Linux
        _need_to_be_root
        _require_scratch
        _require_dm_flakey
        _require_attrs
        _require_metadata_journaling $SCRATCH_DEV
      
        rm -f $seqres.full
      
        _scratch_mkfs >> $seqres.full 2>&1
        _init_flakey
        _mount_flakey
      
        # Create the test file with some initial data and make sure everything is
        # durably persisted.
        $XFS_IO_PROG -f -c "pwrite -S 0xaa 0 32k" $SCRATCH_MNT/foo | _filter_xfs_io
        sync
      
        # Add many small xattrs to our file.
        # We create such a large amount because it's needed to trigger the issue found
        # in btrfs - we need to have an amount that causes the fs to have at least 3
        # btree leafs with xattrs stored in them, and it must work on any leaf size
        # (maximum leaf/node size is 64Kb).
        num_xattrs=2000
        for ((i = 1; i <= $num_xattrs; i++)); do
            name="user.attr_$(printf "%04d" $i)"
            $SETFATTR_PROG -n $name -v "val_$(printf "%04d" $i)" $SCRATCH_MNT/foo
        done
      
        # Sync the filesystem to force a commit of the current btrfs transaction, this
        # is a necessary condition to trigger the bug on btrfs.
        sync
      
        # Now update our file's data and fsync the file.
        # After a successful fsync, if the fsync log/journal is replayed we expect to
        # see all the xattrs we added before with the same values (and the updated file
        # data of course). Btrfs used to delete some of these xattrs when it replayed
        # its fsync log/journal.
        $XFS_IO_PROG -c "pwrite -S 0xbb 8K 16K" \
                     -c "fsync" \
                     $SCRATCH_MNT/foo | _filter_xfs_io
      
        # Simulate a crash/power loss.
        _load_flakey_table $FLAKEY_DROP_WRITES
        _unmount_flakey
      
        # Allow writes again and mount. This makes the fs replay its fsync log.
        _load_flakey_table $FLAKEY_ALLOW_WRITES
        _mount_flakey
      
        echo "File content after crash and log replay:"
        od -t x1 $SCRATCH_MNT/foo
      
        echo "File xattrs after crash and log replay:"
        for ((i = 1; i <= $num_xattrs; i++)); do
            name="user.attr_$(printf "%04d" $i)"
            echo -n "$name="
            $GETFATTR_PROG --absolute-names -n $name --only-values $SCRATCH_MNT/foo
            echo
        done
      
        status=0
        exit
      
      The golden output expects all xattrs to be available, and with the correct
      values, after the fsync log is replayed.
      Signed-off-by: NFilipe Manana <fdmanana@suse.com>
      Signed-off-by: NChris Mason <clm@fb.com>
      36283bf7
    • F
      Btrfs: fix fsync data loss after append write · e4545de5
      Filipe Manana 提交于
      If we do an append write to a file (which increases its inode's i_size)
      that does not have the flag BTRFS_INODE_NEEDS_FULL_SYNC set in its inode,
      and the previous transaction added a new hard link to the file, which sets
      the flag BTRFS_INODE_COPY_EVERYTHING in the file's inode, and then fsync
      the file, the inode's new i_size isn't logged. This has the consequence
      that after the fsync log is replayed, the file size remains what it was
      before the append write operation, which means users/applications will
      not be able to read the data that was successsfully fsync'ed before.
      
      This happens because neither the inode item nor the delayed inode get
      their i_size updated when the append write is made - doing so would
      require starting a transaction in the buffered write path, something that
      we do not do intentionally for performance reasons.
      
      Fix this by making sure that when the flag BTRFS_INODE_COPY_EVERYTHING is
      set the inode is logged with its current i_size (log the in-memory inode
      into the log tree).
      
      This issue is not a recent regression and is easy to reproduce with the
      following test case for fstests:
      
        seq=`basename $0`
        seqres=$RESULT_DIR/$seq
        echo "QA output created by $seq"
      
        here=`pwd`
        tmp=/tmp/$$
        status=1	# failure is the default!
      
        _cleanup()
        {
                _cleanup_flakey
                rm -f $tmp.*
        }
        trap "_cleanup; exit \$status" 0 1 2 3 15
      
        # get standard environment, filters and checks
        . ./common/rc
        . ./common/filter
        . ./common/dmflakey
      
        # real QA test starts here
        _supported_fs generic
        _supported_os Linux
        _need_to_be_root
        _require_scratch
        _require_dm_flakey
        _require_metadata_journaling $SCRATCH_DEV
      
        _crash_and_mount()
        {
                # Simulate a crash/power loss.
                _load_flakey_table $FLAKEY_DROP_WRITES
                _unmount_flakey
                # Allow writes again and mount. This makes the fs replay its fsync log.
                _load_flakey_table $FLAKEY_ALLOW_WRITES
                _mount_flakey
        }
      
        rm -f $seqres.full
      
        _scratch_mkfs >> $seqres.full 2>&1
        _init_flakey
        _mount_flakey
      
        # Create the test file with some initial data and then fsync it.
        # The fsync here is only needed to trigger the issue in btrfs, as it causes the
        # the flag BTRFS_INODE_NEEDS_FULL_SYNC to be removed from the btrfs inode.
        $XFS_IO_PROG -f -c "pwrite -S 0xaa 0 32k" \
                        -c "fsync" \
                        $SCRATCH_MNT/foo | _filter_xfs_io
        sync
      
        # Add a hard link to our file.
        # On btrfs this sets the flag BTRFS_INODE_COPY_EVERYTHING on the btrfs inode,
        # which is a necessary condition to trigger the issue.
        ln $SCRATCH_MNT/foo $SCRATCH_MNT/bar
      
        # Sync the filesystem to force a commit of the current btrfs transaction, this
        # is a necessary condition to trigger the bug on btrfs.
        sync
      
        # Now append more data to our file, increasing its size, and fsync the file.
        # In btrfs because the inode flag BTRFS_INODE_COPY_EVERYTHING was set and the
        # write path did not update the inode item in the btree nor the delayed inode
        # item (in memory struture) in the current transaction (created by the fsync
        # handler), the fsync did not record the inode's new i_size in the fsync
        # log/journal. This made the data unavailable after the fsync log/journal is
        # replayed.
        $XFS_IO_PROG -c "pwrite -S 0xbb 32K 32K" \
                     -c "fsync" \
                     $SCRATCH_MNT/foo | _filter_xfs_io
      
        echo "File content after fsync and before crash:"
        od -t x1 $SCRATCH_MNT/foo
      
        _crash_and_mount
      
        echo "File content after crash and log replay:"
        od -t x1 $SCRATCH_MNT/foo
      
        status=0
        exit
      
      The expected file output before and after the crash/power failure expects the
      appended data to be available, which is:
      
        0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
        *
        0100000 bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb
        *
        0200000
      
      Cc: stable@vger.kernel.org
      Signed-off-by: NFilipe Manana <fdmanana@suse.com>
      Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
      Signed-off-by: NChris Mason <clm@fb.com>
      e4545de5
    • F
      Btrfs: fix crash on close_ctree() if cleaner starts new transaction · da288d28
      Filipe Manana 提交于
      Often when running fstests btrfs/079 I was running into the following
      trace during umount on one of my qemu/kvm test vms:
      
      [ 8245.682441] WARNING: CPU: 8 PID: 25064 at fs/btrfs/extent-tree.c:138 btrfs_put_block_group+0x51/0x69 [btrfs]()
      [ 8245.685039] Modules linked in: btrfs dm_flakey dm_mod crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop fuse parport_pc i2c_piix4 acpi_cpufreq processor psmouse i2c_core thermal_sys parport evdev serio_raw button pcspkr microcode ext4 crc16 jbd2 mbcache sg sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata floppy virtio_pci virtio_ring scsi_mod virtio e1000 [last unloaded: btrfs]
      [ 8245.693860] CPU: 8 PID: 25064 Comm: umount Tainted: G        W       4.1.0-rc5-btrfs-next-10+ #1
      [ 8245.695081] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20150316_085822-nilsson.home.kraxel.org 04/01/2014
      [ 8245.697583]  0000000000000009 ffff88020d047ce8 ffffffff8145eec7 ffffffff81095dce
      [ 8245.699234]  0000000000000000 ffff88020d047d28 ffffffff8104b399 0000000000000028
      [ 8245.700995]  ffffffffa04db07b ffff8801c6036c00 ffff8801c6036d68 ffff880202eb40b0
      [ 8245.702510] Call Trace:
      [ 8245.703006]  [<ffffffff8145eec7>] dump_stack+0x4f/0x7b
      [ 8245.705393]  [<ffffffff81095dce>] ? console_unlock+0x356/0x3a2
      [ 8245.706569]  [<ffffffff8104b399>] warn_slowpath_common+0xa1/0xbb
      [ 8245.707747]  [<ffffffffa04db07b>] ? btrfs_put_block_group+0x51/0x69 [btrfs]
      [ 8245.709101]  [<ffffffff8104b456>] warn_slowpath_null+0x1a/0x1c
      [ 8245.710274]  [<ffffffffa04db07b>] btrfs_put_block_group+0x51/0x69 [btrfs]
      [ 8245.711823]  [<ffffffffa04e3473>] btrfs_free_block_groups+0x145/0x322 [btrfs]
      [ 8245.713251]  [<ffffffffa04ef31a>] close_ctree+0x1ef/0x325 [btrfs]
      [ 8245.714448]  [<ffffffff8117d26e>] ? evict_inodes+0xdc/0xeb
      [ 8245.715539]  [<ffffffffa04cb3ad>] btrfs_put_super+0x19/0x1b [btrfs]
      [ 8245.716835]  [<ffffffff81167607>] generic_shutdown_super+0x73/0xef
      [ 8245.718015]  [<ffffffff81167a3a>] kill_anon_super+0x13/0x1e
      [ 8245.719101]  [<ffffffffa04cb1b6>] btrfs_kill_super+0x17/0x23 [btrfs]
      [ 8245.720316]  [<ffffffff81167544>] deactivate_locked_super+0x3b/0x68
      [ 8245.721517]  [<ffffffff81167dd6>] deactivate_super+0x3f/0x43
      [ 8245.722581]  [<ffffffff8117fbb9>] cleanup_mnt+0x59/0x78
      [ 8245.723538]  [<ffffffff8117fc18>] __cleanup_mnt+0x12/0x14
      [ 8245.724572]  [<ffffffff81065371>] task_work_run+0x8f/0xbc
      [ 8245.725598]  [<ffffffff810028fb>] do_notify_resume+0x45/0x53
      [ 8245.726892]  [<ffffffff814651ac>] int_signal+0x12/0x17
      [ 8245.737887] ---[ end trace a01d038397e99b92 ]---
      [ 8245.769363] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
      [ 8245.770737] Modules linked in: btrfs dm_flakey dm_mod crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop fuse parport_pc i2c_piix4 acpi_cpufreq processor psmouse i2c_core thermal_sys parport evdev serio_raw button pcspkr microcode ext4 crc16 jbd2 mbcache sg sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata floppy virtio_pci virtio_ring scsi_mod virtio e1000 [last unloaded: btrfs]
      [ 8245.772641] CPU: 2 PID: 25064 Comm: umount Tainted: G        W       4.1.0-rc5-btrfs-next-10+ #1
      [ 8245.772641] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20150316_085822-nilsson.home.kraxel.org 04/01/2014
      [ 8245.772641] task: ffff880013005810 ti: ffff88020d044000 task.ti: ffff88020d044000
      [ 8245.772641] RIP: 0010:[<ffffffffa051c8e6>]  [<ffffffffa051c8e6>] btrfs_queue_work+0x2c/0x14d [btrfs]
      [ 8245.772641] RSP: 0018:ffff88020d0478b8  EFLAGS: 00010202
      [ 8245.772641] RAX: 0000000000000004 RBX: 6b6b6b6b6b6b6b6b RCX: ffffffffa0581488
      [ 8245.772641] RDX: 0000000000000000 RSI: ffff880194b7bf48 RDI: ffff880144b6a7a0
      [ 8245.772641] RBP: ffff88020d0478d8 R08: 0000000000000000 R09: 000000000000ffff
      [ 8245.772641] R10: 0000000000000004 R11: 0000000000000005 R12: ffff880194b7bf48
      [ 8245.772641] R13: ffff880194b7bf48 R14: 0000000000000410 R15: 0000000000000000
      [ 8245.772641] FS:  00007f991e77d840(0000) GS:ffff88023e280000(0000) knlGS:0000000000000000
      [ 8245.772641] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
      [ 8245.772641] CR2: 00007fbbd325ee68 CR3: 000000021de8e000 CR4: 00000000000006e0
      [ 8245.772641] Stack:
      [ 8245.772641]  ffff880194b7bf00 ffff880202eb4000 ffff880194b7bf48 0000000000000410
      [ 8245.772641]  ffff88020d047958 ffffffffa04ec6d5 ffff8801629b2ee8 0000000082987570
      [ 8245.772641]  0000000000a5813f 0000000000000001 ffff880013006100 0000000000000002
      [ 8245.772641] Call Trace:
      [ 8245.772641]  [<ffffffffa04ec6d5>] btrfs_wq_submit_bio+0xe1/0x17b [btrfs]
      [ 8245.772641]  [<ffffffff81086bff>] ? check_irq_usage+0x76/0x87
      [ 8245.772641]  [<ffffffffa04ec825>] btree_submit_bio_hook+0xb6/0xd9 [btrfs]
      [ 8245.772641]  [<ffffffffa04ebb7c>] ? btree_csum_one_bio+0xad/0xad [btrfs]
      [ 8245.772641]  [<ffffffffa04eb1a6>] ? btree_io_failed_hook+0x5e/0x5e [btrfs]
      [ 8245.772641]  [<ffffffffa050a6e7>] submit_one_bio+0x8c/0xc7 [btrfs]
      [ 8245.772641]  [<ffffffffa050d75b>] submit_extent_page.isra.18+0x9d/0x186 [btrfs]
      [ 8245.772641]  [<ffffffffa050d95b>] write_one_eb+0x117/0x1ae [btrfs]
      [ 8245.772641]  [<ffffffffa050a79b>] ? end_extent_buffer_writeback+0x21/0x21 [btrfs]
      [ 8245.772641]  [<ffffffffa0510510>] btree_write_cache_pages+0x2ab/0x385 [btrfs]
      [ 8245.772641]  [<ffffffffa04eb2b8>] btree_writepages+0x23/0x5c [btrfs]
      [ 8245.772641]  [<ffffffff8111c661>] do_writepages+0x23/0x2c
      [ 8245.772641]  [<ffffffff81189cd4>] __writeback_single_inode+0xda/0x5bd
      [ 8245.772641]  [<ffffffff8118aa60>] ? writeback_single_inode+0x2b/0x173
      [ 8245.772641]  [<ffffffff8118aafd>] writeback_single_inode+0xc8/0x173
      [ 8245.772641]  [<ffffffff8118ac95>] write_inode_now+0x8a/0x95
      [ 8245.772641]  [<ffffffff81247bf0>] ? _atomic_dec_and_lock+0x30/0x4e
      [ 8245.772641]  [<ffffffff8117cc5e>] iput+0x17d/0x26a
      [ 8245.772641]  [<ffffffffa04ef355>] close_ctree+0x22a/0x325 [btrfs]
      [ 8245.772641]  [<ffffffff8117d26e>] ? evict_inodes+0xdc/0xeb
      [ 8245.772641]  [<ffffffffa04cb3ad>] btrfs_put_super+0x19/0x1b [btrfs]
      [ 8245.772641]  [<ffffffff81167607>] generic_shutdown_super+0x73/0xef
      [ 8245.772641]  [<ffffffff81167a3a>] kill_anon_super+0x13/0x1e
      [ 8245.772641]  [<ffffffffa04cb1b6>] btrfs_kill_super+0x17/0x23 [btrfs]
      [ 8245.772641]  [<ffffffff81167544>] deactivate_locked_super+0x3b/0x68
      [ 8245.772641]  [<ffffffff81167dd6>] deactivate_super+0x3f/0x43
      [ 8245.772641]  [<ffffffff8117fbb9>] cleanup_mnt+0x59/0x78
      [ 8245.772641]  [<ffffffff8117fc18>] __cleanup_mnt+0x12/0x14
      [ 8245.772641]  [<ffffffff81065371>] task_work_run+0x8f/0xbc
      [ 8245.772641]  [<ffffffff810028fb>] do_notify_resume+0x45/0x53
      [ 8245.772641]  [<ffffffff814651ac>] int_signal+0x12/0x17
      [ 8245.772641] Code: 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 53 49 89 f4 48 8b 46 70 a8 04 74 09 48 8b 5f 08 48 85 db 75 03 48 8b 1f 49 89 5c 24 68 <83> 7b 5c ff 74 04 f0 ff 43 50 49 83 7c 24 08 00 74 2c 4c 8d 6b
      [ 8245.772641] RIP  [<ffffffffa051c8e6>] btrfs_queue_work+0x2c/0x14d [btrfs]
      [ 8245.772641]  RSP <ffff88020d0478b8>
      [ 8245.845040] ---[ end trace a01d038397e99b93 ]---
      
      For logical reasons such as the phase of the moon, this happened more
      often with "-o inode_cache" than without any mount options.
      
      After some debugging it turned out to be simple to understand what was
      happening:
      
      1) close_ctree() is called;
      
      2) It then stops the transaction kthread, which commits the current
         transaction;
      
      3) It asks the cleaner kthread to stop, which is currently running
         btrfs_delete_unused_bgs();
      
      4) btrfs_delete_unused_bgs() finds an unused block group, starts a new
         transaction, deletes the block group, which implies COWing some
         tree nodes and leafs and dirtying their respective pages, and then
         finally it ends the transaction it started, without committing it;
      
      5) The cleaner kthread stops;
      
      6) close_ctree() releases (from memory) the block group objects, which
         produces the warning in the trace pasted above;
      
      7) Then it invalidates all pages of the btree inode, by calling
         invalidate_inode_pages2(), which waits for any pages under writeback,
         and releases any non-dirty pages;
      
      8) All work queues are destroyed (waiting first for their current tasks
         to finish execution);
      
      9) A final iput() is called against the btree inode;
      
      10) This iput triggers a writeback of the btree inode because it still
          has dirty pages;
      
      11) This starts the whole chain of callbacks for the btree inode until
          it eventually reaches btrfs_wq_submit_bio() where it leads to a
          NULL pointer dereference because the work queues were already
          destroyed.
      
      Fix this by making the cleaner commit any transaction that it started
      after the transaction kthread was stopped.
      Signed-off-by: NFilipe Manana <fdmanana@suse.com>
      Signed-off-by: NChris Mason <clm@fb.com>
      da288d28
    • F
      Btrfs: fix race between caching kthread and returning inode to inode cache · ae9d8f17
      Filipe Manana 提交于
      While the inode cache caching kthread is calling btrfs_unpin_free_ino(),
      we could have a concurrent call to btrfs_return_ino() that adds a new
      entry to the root's free space cache of pinned inodes. This concurrent
      call does not acquire the fs_info->commit_root_sem before adding a new
      entry if the caching state is BTRFS_CACHE_FINISHED, which is a problem
      because the caching kthread calls btrfs_unpin_free_ino() after setting
      the caching state to BTRFS_CACHE_FINISHED and therefore races with
      the task calling btrfs_return_ino(), which is adding a new entry, while
      the former (caching kthread) is navigating the cache's rbtree, removing
      and freeing nodes from the cache's rbtree without acquiring the spinlock
      that protects the rbtree.
      
      This race resulted in memory corruption due to double free of struct
      btrfs_free_space objects because both tasks can end up doing freeing the
      same objects. Note that adding a new entry can result in merging it with
      other entries in the cache, in which case those entries are freed.
      This is particularly important as btrfs_free_space structures are also
      used for the block group free space caches.
      
      This memory corruption can be detected by a debugging kernel, which
      reports it with the following trace:
      
      [132408.501148] slab error in verify_redzone_free(): cache `btrfs_free_space': double free detected
      [132408.505075] CPU: 15 PID: 12248 Comm: btrfs-ino-cache Tainted: G        W       4.1.0-rc5-btrfs-next-10+ #1
      [132408.505075] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20150316_085822-nilsson.home.kraxel.org 04/01/2014
      [132408.505075]  ffff880023e7d320 ffff880163d73cd8 ffffffff8145eec7 ffffffff81095dce
      [132408.505075]  ffff880009735d40 ffff880163d73ce8 ffffffff81154e1e ffff880163d73d68
      [132408.505075]  ffffffff81155733 ffffffffa054a95a ffff8801b6099f00 ffffffffa0505b5f
      [132408.505075] Call Trace:
      [132408.505075]  [<ffffffff8145eec7>] dump_stack+0x4f/0x7b
      [132408.505075]  [<ffffffff81095dce>] ? console_unlock+0x356/0x3a2
      [132408.505075]  [<ffffffff81154e1e>] __slab_error.isra.28+0x25/0x36
      [132408.505075]  [<ffffffff81155733>] __cache_free+0xe2/0x4b6
      [132408.505075]  [<ffffffffa054a95a>] ? __btrfs_add_free_space+0x2f0/0x343 [btrfs]
      [132408.505075]  [<ffffffffa0505b5f>] ? btrfs_unpin_free_ino+0x8e/0x99 [btrfs]
      [132408.505075]  [<ffffffff810f3b30>] ? time_hardirqs_off+0x15/0x28
      [132408.505075]  [<ffffffff81084d42>] ? trace_hardirqs_off+0xd/0xf
      [132408.505075]  [<ffffffff811563a1>] ? kfree+0xb6/0x14e
      [132408.505075]  [<ffffffff811563d0>] kfree+0xe5/0x14e
      [132408.505075]  [<ffffffffa0505b5f>] btrfs_unpin_free_ino+0x8e/0x99 [btrfs]
      [132408.505075]  [<ffffffffa0505e08>] caching_kthread+0x29e/0x2d9 [btrfs]
      [132408.505075]  [<ffffffffa0505b6a>] ? btrfs_unpin_free_ino+0x99/0x99 [btrfs]
      [132408.505075]  [<ffffffff8106698f>] kthread+0xef/0xf7
      [132408.505075]  [<ffffffff810f3b08>] ? time_hardirqs_on+0x15/0x28
      [132408.505075]  [<ffffffff810668a0>] ? __kthread_parkme+0xad/0xad
      [132408.505075]  [<ffffffff814653d2>] ret_from_fork+0x42/0x70
      [132408.505075]  [<ffffffff810668a0>] ? __kthread_parkme+0xad/0xad
      [132408.505075] ffff880023e7d320: redzone 1:0x9f911029d74e35b, redzone 2:0x9f911029d74e35b.
      [132409.501654] slab: double free detected in cache 'btrfs_free_space', objp ffff880023e7d320
      [132409.503355] ------------[ cut here ]------------
      [132409.504241] kernel BUG at mm/slab.c:2571!
      
      Therefore fix this by having btrfs_unpin_free_ino() acquire the lock
      that protects the rbtree while doing the searches and removing entries.
      
      Fixes: 1c70d8fb ("Btrfs: fix inode caching vs tree log")
      Cc: stable@vger.kernel.org
      Signed-off-by: NFilipe Manana <fdmanana@suse.com>
      Signed-off-by: NChris Mason <clm@fb.com>
      ae9d8f17
    • F
      Btrfs: use kmem_cache_free when freeing entry in inode cache · c3f4a168
      Filipe Manana 提交于
      The free space entries are allocated using kmem_cache_zalloc(),
      through __btrfs_add_free_space(), therefore we should use
      kmem_cache_free() and not kfree() to avoid any confusion and
      any potential problem. Looking at the kfree() definition at
      mm/slab.c it has the following comment:
      
        /*
         * (...)
         *
         * Don't free memory not originally allocated by kmalloc()
         * or you will run into trouble.
         */
      
      So better be safe and use kmem_cache_free().
      
      Cc: stable@vger.kernel.org
      Signed-off-by: NFilipe Manana <fdmanana@suse.com>
      Reviewed-by: NDavid Sterba <dsterba@suse.cz>
      Signed-off-by: NChris Mason <clm@fb.com>
      c3f4a168
    • F
      Btrfs: fix race between balance and unused block group deletion · 67c5e7d4
      Filipe Manana 提交于
      We have a race between deleting an unused block group and balancing the
      same block group that leads to an assertion failure/BUG(), producing the
      following trace:
      
      [181631.208236] BTRFS: assertion failed: 0, file: fs/btrfs/volumes.c, line: 2622
      [181631.220591] ------------[ cut here ]------------
      [181631.222959] kernel BUG at fs/btrfs/ctree.h:4062!
      [181631.223932] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
      [181631.224566] Modules linked in: btrfs dm_flakey dm_mod crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop fuse acpi_cpufreq parpor$
      [181631.224566] CPU: 8 PID: 17451 Comm: btrfs Tainted: G        W       4.1.0-rc5-btrfs-next-10+ #1
      [181631.224566] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20150316_085822-nilsson.home.kraxel.org 04/01/2014
      [181631.224566] task: ffff880127e09590 ti: ffff8800b5824000 task.ti: ffff8800b5824000
      [181631.224566] RIP: 0010:[<ffffffffa03f19f6>]  [<ffffffffa03f19f6>] assfail.constprop.50+0x1e/0x20 [btrfs]
      [181631.224566] RSP: 0018:ffff8800b5827ae8  EFLAGS: 00010246
      [181631.224566] RAX: 0000000000000040 RBX: ffff8800109fc218 RCX: ffffffff81095dce
      [181631.224566] RDX: 0000000000005124 RSI: ffffffff81464819 RDI: 00000000ffffffff
      [181631.224566] RBP: ffff8800b5827ae8 R08: 0000000000000001 R09: 0000000000000000
      [181631.224566] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800109fc200
      [181631.224566] R13: ffff880020095000 R14: ffff8800b1a13f38 R15: ffff880020095000
      [181631.224566] FS:  00007f70ca0b0c80(0000) GS:ffff88013ec00000(0000) knlGS:0000000000000000
      [181631.224566] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
      [181631.224566] CR2: 00007f2872ab6e68 CR3: 00000000a717c000 CR4: 00000000000006e0
      [181631.224566] Stack:
      [181631.224566]  ffff8800b5827ba8 ffffffffa03f3916 ffff8800b5827b38 ffffffffa03d080e
      [181631.224566]  ffffffffa03d1423 ffff880020095000 ffff88001233c000 0000000000000001
      [181631.224566]  ffff880020095000 ffff8800b1a13f38 0000000a69c00000 0000000000000000
      [181631.224566] Call Trace:
      [181631.224566]  [<ffffffffa03f3916>] btrfs_remove_chunk+0xa4/0x6bb [btrfs]
      [181631.224566]  [<ffffffffa03d080e>] ? join_transaction.isra.8+0xb9/0x3ba [btrfs]
      [181631.224566]  [<ffffffffa03d1423>] ? wait_current_trans.isra.13+0x22/0xfc [btrfs]
      [181631.224566]  [<ffffffffa03f3fbc>] btrfs_relocate_chunk.isra.29+0x8f/0xa7 [btrfs]
      [181631.224566]  [<ffffffffa03f54df>] btrfs_balance+0xaa4/0xc52 [btrfs]
      [181631.224566]  [<ffffffffa03fd388>] btrfs_ioctl_balance+0x23f/0x2b0 [btrfs]
      [181631.224566]  [<ffffffff810872f9>] ? trace_hardirqs_on+0xd/0xf
      [181631.224566]  [<ffffffffa04019a3>] btrfs_ioctl+0xfe2/0x2220 [btrfs]
      [181631.224566]  [<ffffffff812603ed>] ? __this_cpu_preempt_check+0x13/0x15
      [181631.224566]  [<ffffffff81084669>] ? arch_local_irq_save+0x9/0xc
      [181631.224566]  [<ffffffff81138def>] ? handle_mm_fault+0x834/0xcd2
      [181631.224566]  [<ffffffff81138def>] ? handle_mm_fault+0x834/0xcd2
      [181631.224566]  [<ffffffff8103e48c>] ? __do_page_fault+0x211/0x424
      [181631.224566]  [<ffffffff811755e6>] do_vfs_ioctl+0x3c6/0x479
      (...)
      
      The sequence of steps leading to this are:
      
                 CPU 0                                         CPU 1
      
        btrfs_balance()
          btrfs_relocate_chunk()
      
            btrfs_relocate_block_group(bg X)
              btrfs_lookup_block_group(bg X)
      
                                                     cleaner_kthread
                                                        locks fs_info->cleaner_mutex
      
                                                        btrfs_delete_unused_bgs()
                                                          finds bg X, which became
                                                          unused in the previous
                                                          transaction
      
                                                          checks bg X ->ro == 0,
                                                          so it proceeds
              sets bg X ->ro to 1
              (btrfs_set_block_group_ro(bg X))
      
              blocks on fs_info->cleaner_mutex
                                                          btrfs_remove_chunk(bg X)
                                                        unlocks fs_info->cleaner_mutex
      
              acquires fs_info->cleaner_mutex
              relocate_block_group()
                --> does nothing, no extents found in
                    the extent tree from bg X
              unlocks fs_info->cleaner_mutex
      
            btrfs_relocate_block_group(bg X) returns
      
          btrfs_remove_chunk(bg X)
             extent map not found
                --> ASSERT(0)
      
      Fix this by using a new mutex to make sure these 2 operations, block
      group relocation and removal, are serialized.
      
      This issue is reproducible by running fstests generic/038 (which stresses
      chunk allocation and automatic removal of unused block groups) together
      with the following balance loop:
      
          while true; do btrfs balance start -dusage=0 <mountpoint> ; done
      Signed-off-by: NFilipe Manana <fdmanana@suse.com>
      Signed-off-by: NChris Mason <clm@fb.com>
      67c5e7d4
    • Z
      btrfs: add error handling for scrub_workers_get() · e82afc52
      Zhao Lei 提交于
      Although it is a rare case, we'd better free previous allocated
      memory on error.
      Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
      Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
      Signed-off-by: NChris Mason <clm@fb.com>
      e82afc52
    • Z
      btrfs: cleanup noused initialization of dev in btrfs_end_bio() · 65f53338
      Zhao Lei 提交于
      It is introduced by:
       c404e0dc
       Btrfs: fix use-after-free in the finishing procedure of the device replace
      
      But seems no relationship with that bug, this patch revirt these
      code block for cleanup.
      Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
      Signed-off-by: NChris Mason <clm@fb.com>
      65f53338
    • Y
      btrfs: qgroup: allow user to clear the limitation on qgroup · fe759907
      Yang Dongsheng 提交于
      Currently, we can only set a limitation on a qgroup, but we
      can not clear it.
      
      This patch provide a choice to user to clear a limitation on
      qgroup by passing a value of CLEAR_VALUE(-1) to kernel.
      Reported-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
      Signed-off-by: NDongsheng Yang <yangds.fnst@cn.fujitsu.com>
      Tested-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
      Signed-off-by: NChris Mason <clm@fb.com>
      fe759907
  3. 25 6月, 2015 1 次提交
  4. 23 6月, 2015 1 次提交
  5. 22 6月, 2015 1 次提交
  6. 19 6月, 2015 3 次提交
  7. 13 6月, 2015 2 次提交
  8. 11 6月, 2015 14 次提交