- 07 2月, 2009 26 次提交
-
-
由 Alexander Duyck 提交于
Add a counter for dma out of sync errors reported via interrupt. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
Most of the code for the testing has pretty much become stale at this point and is need of update. This update just streamlines most of the code, widens the range of interrupt testing. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This driver is currently using HW_CSUM which is not correct. Update this to use the IP_CSUM and IPV6_CSUM flags. In addition consolidate the TSO flag setting. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This statistic is not used and so it is safe to remove Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
All of the nvm ops have the tag _nvm added to the end which is redundant since all of the calls to the ops have to go through the nvm ops struct anyway. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch renames write_phy_reg to write_reg and read_phy_reg to read_reg. It seems redundant to call out phy in an operation that is part of the phy_ops struct. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
Instead of pulling the mac address from EEPROM it is easier to pull it from the RAL/RAH registers and then just copy it into the address structures. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch makes dev_spec a union and simplifies it so that it does not require dynamic allocation and freeing in the driver. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
Add a link check function to contain all activities related to verifying that the link is present. The current approach is a bit cludgy and needs to be cleaned up. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
Since igb supports only pci-e nics and there is no plan to support any legacy pci parts in the driver there isn't really much need for checking to see if an io port is needed. In the unlikely event that we do begin supporting legacy pci parts then we can see about adding this code back to the driver. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch moves the initialization of the number of queues into set_interrupt_capability. This allows the number of queues to increase in the unlikely event that the system initially fails to allocate enough msi-x interrupts, does a suspend/resume, and then can allocate enough interrupts on resume. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
buffsz is being repeatedly set when allocaing buffers. Since this value should only need to be set once in the function I am moving it out of the looped portion of the path. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
While cleaning up the skb_over panic with small frames I found there was room for improvement in the ordering of operations within the rx receive flow. These changes will place the prefetch for the next descriptor to a point earlier in the rx path. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter P Waskiewicz Jr 提交于
Now that our set_num_queues() routines for each feature are re-entrant, and can be called at any point, they shouldn't zero out the feature's indices or mask bits. Subsequent calls into those routines for those features can result in zero Rx and Tx queues being assigned, causing a panic later in driver reinitialization. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ayaz Abdulla 提交于
This patch bumps the version up to 63 Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ayaz Abdulla 提交于
This patch adds another type of recoverable error to the driver. It also modifies the sequence for recovery to include a mac reset and clearing of interrupts. Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ayaz Abdulla 提交于
This patch fixes the ethtool tx csum "set" command. A recent patch was submitted to remove HW_CSUM and use IP_CSUM instead. Therefore, the corresponding ethtool command should also be modified. Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ayaz Abdulla 提交于
This patch fixes an issue with the suspend/resume cycle with msi interrupts. See bugzilla number 10487 for more details. The fix is to re-setup a private msi pci config offset field. Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ayaz Abdulla 提交于
This patch updates the logic used to communicate with the mgmt unit. It also adds a version check for a newer mgmt unit firmware. * Fixed udelay to schedule_timeout_uninterruptible Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
$ diff-funcs xs_udp_write_space net/sunrpc/xprtsock.c net/sunrpc/xprtsock.c xs_tcp_write_space --- net/sunrpc/xprtsock.c:xs_udp_write_space() +++ net/sunrpc/xprtsock.c:xs_tcp_write_space() @@ -1,4 +1,4 @@ - * xs_udp_write_space - callback invoked when socket buffer space + * xs_tcp_write_space - callback invoked when socket buffer space * becomes available * @sk: socket whose state has changed * @@ -7,12 +7,12 @@ * progress, otherwise we'll waste resources thrashing kernel_sendmsg * with a bunch of small requests. */ -static void xs_udp_write_space(struct sock *sk) +static void xs_tcp_write_space(struct sock *sk) { read_lock(&sk->sk_callback_lock); - /* from net/core/sock.c:sock_def_write_space */ - if (sock_writeable(sk)) { + /* from net/core/stream.c:sk_stream_write_space */ + if (sk_stream_wspace(sk) >= sk_stream_min_wspace(sk)) { struct socket *sock; struct rpc_xprt *xprt; $ codiff net/sunrpc/xprtsock.o net/sunrpc/xprtsock.o.new net/sunrpc/xprtsock.c: xs_tcp_write_space | -163 xs_udp_write_space | -163 2 functions changed, 326 bytes removed net/sunrpc/xprtsock.c: xs_write_space | +179 1 function changed, 179 bytes added net/sunrpc/xprtsock.o.new: 3 functions changed, 179 bytes added, 326 bytes removed, diff: -147 Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
$ codiff net/ipv6/addrconf.o net/ipv6/addrconf.o.new net/ipv6/addrconf.c: addrconf_notify | -267 1 function changed, 267 bytes removed net/ipv6/addrconf.c: add_addr | +86 1 function changed, 86 bytes added net/ipv6/addrconf.o.new: 2 functions changed, 86 bytes added, 267 bytes removed, diff: -181 Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter P Waskiewicz Jr 提交于
Tx Head writeback is causing multi-microsecond stalls on PCIe chipsets, due to partial cacheline writebacks. Removing this feature removes these issues. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter P Waskiewicz Jr 提交于
The flow control handling is overly complicated and difficult to maintain. This patch cleans up the flow control handling and makes it much more explicit. It also adds 1G flow control autonegotiation, for 1G copper links, 1G KX links, and 1G fiber links. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 2月, 2009 13 次提交
-
-
由 Yinghai Lu 提交于
Impact: change default msix and napic can work again Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yinghai Lu 提交于
Impact: cleanup so get less irq. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yinghai Lu 提交于
Impact: clean up schedule it later after disable it. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yinghai Lu 提交于
Impact: fix bug for msix, we still need that flag to enable irq respectively Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yinghai Lu 提交于
Impact: make /proc/interrupts could show more info which irq is rx or other for msi-x add three name fields for rx, tx, other Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pablo Neira Ayuso 提交于
Currently, netlink_broadcast() reports errors to the caller if no messages at all were delivered: 1) If, at least, one message has been delivered correctly, returns 0. 2) Otherwise, if no messages at all were delivered due to skb_clone() failure, return -ENOBUFS. 3) Otherwise, if there are no listeners, return -ESRCH. With this patch, the caller knows if the delivery of any of the messages to the listeners have failed: 1) If it fails to deliver any message (for whatever reason), return -ENOBUFS. 2) Otherwise, if all messages were delivered OK, returns 0. 3) Otherwise, if no listeners, return -ESRCH. In the current ctnetlink code and in Netfilter in general, we can add reliable logging and connection tracking event delivery by dropping the packets whose events were not successfully delivered over Netlink. Of course, this option would be settable via /proc as this approach reduces performance (in terms of filtered connections per seconds by a stateful firewall) but providing reliable logging and event delivery (for conntrackd) in return. This patch also changes some clients of netlink_broadcast() that may report ENOBUFS errors via printk. This error handling is not of any help. Instead, the userspace daemons that are listening to those netlink messages should resync themselves with the kernel-side if they hit ENOBUFS. BTW, netlink_broadcast() clients include those that call cn_netlink_send(), nlmsg_multicast() and genlmsg_multicast() since they internally call netlink_broadcast() and return its error value. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alex Chiang 提交于
Cosmetic change to use struct e1000_mac_info.serdes_has_link consistently as the 'bool' that it's declared as. No functional change. Signed-off-by: NAlex Chiang <achiang@hp.com> Acked-by: NJeff Kirsher <Jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter P Waskiewicz Jr 提交于
Currently ixgbe does not display the EEPROM version in ethtool -i, where other drivers do. The EEPROM version is located at offset 0x29. This patch adds support to display it. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter P Waskiewicz Jr 提交于
The current code has some flaws in it when performing autonegotiation, especially on KX/KX4 links. This patch updates the code to better handle the autonegotiation states on link setup. The patch also removes a redundant link configuration call on driver load, and moves link configuration to the ->open() path. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter P Waskiewicz Jr 提交于
The current code to determine the number of queues the device will want on driver initialization is ugly and difficult to maintain. It also doesn't allow for easy expansion for future features or future hardware. This patch refactors these routines, and make them easier to deal with. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
The previous fix ad0f9904 (gro: Fix handling of imprecisely split packets) only fixed the case of frags merging, frag_list merging in the same circumstances were still broken. In particular, the packet headers end up in the data stream. This patch fixes this plus another issue where an imprecisely split packet header may be read incorrectly (this is mostly harmless since it'll simply cause the packet to not match and be rejected for GRO). Thanks to Emil Tantilov and Jeff Kirsher for helping to track this down. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Graf Yang 提交于
Signed-off-by: NGraf Yang <graf.yang@analog.com> Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Unlike a normal socket path, the tuntap device send path does not have any accounting. This means that the user-space sender may be able to pin down arbitrary amounts of kernel memory by continuing to send data to an end-point that is congested. Even when this isn't an issue because of limited queueing at most end points, this can also be a problem because its only response to congestion is packet loss. That is, when those local queues at the end-point fills up, the tuntap device will start wasting system time because it will continue to send data there which simply gets dropped straight away. Of course one could argue that everybody should do congestion control end-to-end, unfortunately there are people in this world still hooked on UDP, and they don't appear to be going away anywhere fast. In fact, we've always helped them by performing accounting in our UDP code, the sole purpose of which is to provide congestion feedback other than through packet loss. This patch attempts to apply the same bandaid to the tuntap device. It creates a pseudo-socket object which is used to account our packets just as a normal socket does for UDP. Of course things are a little complex because we're actually reinjecting traffic back into the stack rather than out of the stack. The stack complexities however should have been resolved by preceding patches. So this one can simply start using skb_set_owner_w. For now the accounting is essentially disabled by default for backwards compatibility. In particular, we set the cap to INT_MAX. This is so that existing applications don't get confused by the sudden arrival EAGAIN errors. In future we may wish (or be forced to) do this by default. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 2月, 2009 1 次提交
-
-
由 Herbert Xu 提交于
The function sock_alloc_send_pskb is completely useless if not exported since most of the code in it won't be used as is. In fact, this code has already been duplicated in the tun driver. Now that we need accounting in the tun driver, we can in fact use this function as is. So this patch marks it for export again. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-