- 19 6月, 2021 10 次提交
-
-
由 Paolo Abeni 提交于
This patch added three new members named data_csum, csum_len and map_csum in struct mptcp_subflow_context, implemented a new function named mptcp_validate_data_checksum(). If the current mapping is valid and csum is enabled traverse the later pending skbs and compute csum incrementally till the whole mapping has been covered. If not enough data is available in the rx queue, return MAPPING_EMPTY - that is, no data. Next subflow_data_ready invocation will trigger again csum computation. When the full DSS is available, validate the csum and return to the caller an appropriate error code, to trigger subflow reset of fallback as required by the RFC. Additionally: - if the csum prevence in the DSS don't match the negotiated value e.g. csum present, but not requested, return invalid mapping to trigger subflow reset. - keep some csum state, to avoid re-compute the csum on the same data when multiple rx queue traversal are required. - clean-up the uncompleted mapping from the receive queue on close, to allow proper subflow disposal Co-developed-by: NGeliang Tang <geliangtang@gmail.com> Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geliang Tang 提交于
In mptcp_parse_option, adjust the expected_opsize, and always parse the data checksum value from the receiving DSS regardless of csum presence. Then save it in mp_opt->csum. Co-developed-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geliang Tang 提交于
This patch added a new member named csum in struct mptcp_options_received. When parsing the MP_CAPABLE with data, if the checksum is enabled, adjust the expected_opsize. If the receiving option length matches the length with the data checksum, get the checksum value and save it in mp_opt->csum. And in mptcp_incoming_options, pass it to mpext->csum. We always parse any csum/nocsum combination and delay the presence check to later code, to allow reset if missing. Additionally, in the TX path, use the newly introduce ext field to avoid MPTCP csum recomputation on TCP retransmission and unneeded csum update on when setting the data fin_flag. Co-developed-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geliang Tang 提交于
This patch added a new flag csum_reqd in struct mptcp_options_received, if the flag MPTCP_CAP_CHECKSUM_REQD is set in the receiving MP_CAPABLE suboption, set this flag. In mptcp_sk_clone and subflow_finish_connect, if the csum_reqd flag is set, enable the msk->csum_enabled flag. Acked-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geliang Tang 提交于
This patch added a new parameter name sk in mptcp_get_options(). Acked-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geliang Tang 提交于
In mptcp_write_options, if the checksum is enabled, adjust the option length and send out the data checksum with DSS suboption. Co-developed-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geliang Tang 提交于
If the checksum is enabled, send out the data checksum with the MP_CAPABLE suboption with data. In mptcp_established_options_mp, save the data checksum in opts->ext_copy.csum. In mptcp_write_options, adjust the option length and send it out with the MP_CAPABLE suboption. Co-developed-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geliang Tang 提交于
This patch added a new member csum_reqd in struct mptcp_out_options and struct mptcp_subflow_request_sock. Initialized it with the helper function mptcp_is_checksum_enabled(). In mptcp_write_options, if this field is enabled, send out the MP_CAPABLE suboption with the MPTCP_CAP_CHECKSUM_REQD flag. Acked-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geliang Tang 提交于
This patch added a new member named csum in struct mptcp_ext, implemented a new function named mptcp_generate_data_checksum(). Generate the data checksum in mptcp_sendmsg_frag, save it in mpext->csum. Note that we must generate the csum for zero window probe, too. Do the csum update incrementally, to avoid multiple csum computation when the data is appended to existing skb. Note that in a later patch we will skip unneeded csum related operation. Changes not included here to keep the delta small. Co-developed-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geliang Tang 提交于
This patch added a new member named csum_enabled in struct mptcp_sock, used a dummy mptcp_is_checksum_enabled() helper to initialize it. Also added a new member named mptcpi_csum_enabled in struct mptcp_info to expose the csum_enabled flag. Acked-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 6月, 2021 3 次提交
-
-
由 Florian Westphal 提交于
This adds support for SO_TIMESTAMP(NS). Timestamps are passed to userspace in the same way as for plain tcp sockets. Acked-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
Move the pre-check to the function that handles all SOL_SOCKET values. At this point there is complete coverage for all values that were accepted by the pre-check. BUSYPOLL functions are accepted but will not have any functionality yet until its clear how the expected mptcp behaviour should look like. Acked-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
This adds support for TIMESTAMP(NS) setsockopt. This doesn't make things work yet, because the mptcp receive path doesn't convert the skb timestamps to cmsgs for userspace consumption. receive path cmsg support is added ina followup patch. Acked-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 5月, 2021 10 次提交
-
-
由 Matthieu Baerts 提交于
To avoid confusions, it seems better to parse this sysctl parameter as a boolean. We use it as a boolean, no need to parse an integer and bring confusions if we see a value different from 0 and 1, especially with this parameter name: enabled. It seems fine to do this modification because the default value is 1 (enabled). Then the only other interesting value to set is 0 (disabled). All other values would not have changed the default behaviour. Suggested-by: NFlorian Westphal <fw@strlen.de> Acked-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NMatthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Matthieu Baerts 提交于
Since the introduction of the sysctl support in MPTCP with commit 784325e9 ("mptcp: new sysctl to control the activation per NS"), we don't check CONFIG_SYSCTL. Until now, that was not an issue: the register and unregister functions were replaced by NO-OP one if SYSCTL was not enabled in the config. The only thing we could have avoid is not to reserve memory for the table but that's for the moment only a small table per net-ns. But the following commit is going to use SYSCTL_ZERO and SYSCTL_ONE which are not be defined if SYSCTL is not enabled in the config. This causes 'undefined reference' errors from the linker. Reported-by: Nkernel test robot <lkp@intel.com> Signed-off-by: NMatthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Jianguo Wu 提交于
When add address with port, it is mean to create a listening socket, and send an ADD_ADDR to remote, so it must have flag signal set, add this check in mptcp_pm_parse_addr(). Fixes: a77e9179 ("mptcp: deal with MPTCP_PM_ADDR_ATTR_PORT in PM netlink") Acked-by: NGeliang Tang <geliangtang@gmail.com> Reviewed-by: NMatthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: NJianguo Wu <wujianguo@chinatelecom.cn> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Jianguo Wu 提交于
Memory of struct pm_nl_pernet{} is allocated by kzalloc() in setup_net()->ops_init(), so it's no need to reset counters and zero bitmap in pm_nl_init_net(). Acked-by: NPaolo Abeni <pabeni@redhat.com> Reviewed-by: NMatthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: NJianguo Wu <wujianguo@chinatelecom.cn> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Jianguo Wu 提交于
For outgoing subflow join, when recv SYNACK, in subflow_finish_connect(), the mptcp_finish_join() may return false in some cases, and send a RESET to remote, and no local hmac is required. So generate subflow hmac after mptcp_finish_join(). Fixes: ec3edaa7 ("mptcp: Add handling of outgoing MP_JOIN requests") Signed-off-by: NJianguo Wu <wujianguo@chinatelecom.cn> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Jianguo Wu 提交于
We have macro TOKEN_MAX_RETRIES for the number of token generate retries, so using TOKEN_MAX_RETRIES in subflow_check_req(). And rename TOKEN_MAX_RETRIES to MPTCP_TOKEN_MAX_RETRIES as it is now exposed. Fixes: 535fb815 ("mptcp: token: move retry to caller") Reviewed-by: NMatthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: NJianguo Wu <wujianguo@chinatelecom.cn> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Jianguo Wu 提交于
After commit 2c5ebd00 ("mptcp: refactor token container"), pr_debug() is called before mptcp_crypto_key_gen_sha() in mptcp_token_new_connect(), so the output local_key, token and idsn are 0, like: MPTCP: ssk=00000000f6b3c4a2, local_key=0, token=0, idsn=0 Move pr_debug() after mptcp_crypto_key_gen_sha(). Fixes: 2c5ebd00 ("mptcp: refactor token container") Acked-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NJianguo Wu <wujianguo@chinatelecom.cn> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Paolo Abeni 提交于
When some mapping related errors occurs we close the main MPC subflow with a RST. We should instead fallback gracefully to TCP, and do the reset only for MPJ subflows. Fixes: d22f4988 ("mptcp: process MP_CAPABLE data option") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/192Reported-by: NMatthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Paolo Abeni 提交于
In subflow_syn_recv_sock() we currently skip options parsing for OoO packet, given that such packets may not carry the relevant MPC option. If the peer generates an MPC+data TSO packet and some of the early segments are lost or get reorder, we server will ignore the peer key, causing transient, unexpected fallback to TCP. The solution is always parsing the incoming MPTCP options, and do the fallback only for in-order packets. This actually cleans the existing code a bit. Fixes: d22f4988 ("mptcp: process MP_CAPABLE data option") Reported-by: NMatthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Paolo Abeni 提交于
MPTCP sk_forward_memory handling is a bit special, as such field is protected by the msk socket spin_lock, instead of the plain socket lock. Currently we have a code path updating such field without handling the relevant lock: __mptcp_retrans() -> __mptcp_clean_una_wakeup() Several helpers in __mptcp_clean_una_wakeup() will update sk_forward_alloc, possibly causing such field corruption, as reported by Matthieu. Address the issue providing and using a new variant of blamed function which explicitly acquires the msk spin lock. Fixes: 64b9cea7 ("mptcp: fix spurious retransmissions") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/172Reported-by: NMatthieu Baerts <matthieu.baerts@tessares.net> Tested-by: NMatthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
- 26 5月, 2021 4 次提交
-
-
由 Davide Caratti 提交于
when Linux receives an echo-ed ADD_ADDR, it checks the IP address against the list of "announced" addresses. In case of a positive match, the timer that handles retransmissions is stopped regardless of the 'Address Id' in the received packet: this behaviour does not comply with RFC8684 3.4.1. Fix it by validating the 'Address Id' in received echo-ed ADD_ADDRs. Tested using packetdrill, with the following captured output: unpatched kernel: Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0xfd2e62517888fe29,mptcp dss ack 3007449509], length 0 In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 1.2.3.4,mptcp dss ack 3013740213], length 0 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0xfd2e62517888fe29,mptcp dss ack 3007449509], length 0 In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 90 198.51.100.2,mptcp dss ack 3013740213], length 0 ^^^ retransmission is stopped here, but 'Address Id' is 90 patched kernel: Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0 In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 1.2.3.4,mptcp dss ack 1672384568], length 0 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0 In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 90 198.51.100.2,mptcp dss ack 1672384568], length 0 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0 In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 198.51.100.2,mptcp dss ack 1672384568], length 0 ^^^ retransmission is stopped here, only when both 'Address Id' and 'IP Address' match Fixes: 00cfd77b ("mptcp: retransmit ADD_ADDR when timeout") Signed-off-by: NDavide Caratti <dcaratti@redhat.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paolo Abeni 提交于
Another left-over. Avoid flooding dmesg with useless text, we already have a MIB for that event. Fixes: 648ef4b8 ("mptcp: Implement MPTCP receive path") Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paolo Abeni 提交于
This is a left-over of early day. A malicious peer can flood the kernel logs with useless messages, just drop it. Fixes: f296234c ("mptcp: Add handling of incoming MP_JOIN requests") Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paolo Abeni 提交于
We can't use tcp_set_congestion_control() on an mptcp socket, as such function can end-up accessing a tcp-specific field - prior_ssthresh - causing an OOB access. To allow propagating the correct ca algo on subflow, cache the ca name at initialization time. Additionally avoid overriding the user-selected CA (if any) at clone time. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/182 Fixes: aa1fbd94 ("mptcp: sockopt: add TCP_CONGESTION and TCP_INFO") Acked-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 5月, 2021 1 次提交
-
-
由 Paolo Abeni 提交于
Maxim reported several issues when forcing a TCP transparent proxy to use the MPTCP protocol for the inbound connections. He also provided a clean reproducer. The problem boils down to 'mptcp_frag_can_collapse_to()' assuming that only MPTCP will use the given page_frag. If others - e.g. the plain TCP protocol - allocate page fragments, we can end-up re-using already allocated memory for mptcp_data_frag. Fix the issue ensuring that the to-be-expanded data fragment is located at the current page frag end. v1 -> v2: - added missing fixes tag (Mat) Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/178Reported-and-tested-by: NMaxim Galaganov <max@internet.ru> Fixes: 18b683bf ("mptcp: queue data for mptcp level retransmission") Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 5月, 2021 1 次提交
-
-
由 Paolo Abeni 提交于
If userspace exits before calling accept() on a listener that had at least one new connection ready, we get: Attempt to release TCP socket in state 8 This happens because the mptcp socket gets cloned when the TCP connection is ready, but the socket is never exposed to userspace. The client additionally sends a DATA_FIN, which brings connection into CLOSE_WAIT state. This in turn prevents the orphan+state reset fixup in mptcp_sock_destruct() from doing its job. Fixes: 3721b9b6 ("mptcp: Track received DATA_FIN sequence number and add related helpers") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/185Tested-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Link: https://lore.kernel.org/r/20210507001638.225468-1-mathew.j.martineau@linux.intel.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
- 24 4月, 2021 5 次提交
-
-
由 Yonglong Li 提交于
This patch adds support for MSG_PEEK flag. Packets are not removed from the receive_queue if MSG_PEEK set in recv() system call. Acked-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NYonglong Li <liyonglong@chinatelecom.cn> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paolo Abeni 提交于
Currently mptcp_sendmsg() fails with EOPNOTSUPP if the user-space provides some unsupported flag. That is unexpected and may foul existing applications migrated to MPTCP, which expect a different behavior. Change the mentioned function to silently ignore the unsupported flags except MSG_FASTOPEN. This is the only flags currently not supported by MPTCP with user-space visible side-effects. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/162Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paolo Abeni 提交于
The mentioned flag is currently silenlty ignored. This change implements the TCP-like behaviour, dropping the pending data up to the specified length. Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Sigend-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paolo Abeni 提交于
mptcp_recvmsg() currently silently ignores MSG_ERRQUEUE, returning input data instead of error cmsg. This change provides a dummy implementation for MSG_ERRQUEUE - always returns no data. That is consistent with the current lack of a suitable IP_RECVERR setsockopt() support. Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mat Martineau 提交于
With this change, the MPTCP-level retransmission timer is used to resend DATA_FIN. The retranmit timer is not stopped while waiting for a MPTCP-level ACK of DATA_FIN, and retransmitted DATA_FINs are sent on all subflows. The retry interval starts at TCP_RTO_MIN and then doubles on each attempt, up to TCP_RTO_MAX. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/146 Fixes: 43b54c6e ("mptcp: Use full MPTCP-level disconnect state machine") Acked-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 4月, 2021 6 次提交
-
-
由 Geliang Tang 提交于
This patch used the macro helper mptcp_for_each_subflow() instead of list_for_each_entry() in mptcp_close. Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geliang Tang 提交于
This patch added a tracepoint in subflow_check_data_avail() to show the mapping status. Suggested-by: NPaolo Abeni <pabeni@redhat.com> Acked-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geliang Tang 提交于
This patch added a tracepoint in ack_update_msk() to track the incoming data_ack and window/snd_una updates. Suggested-by: NPaolo Abeni <pabeni@redhat.com> Acked-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geliang Tang 提交于
This patch added a tracepoint in the mapping status function get_mapping_status() to dump every mpext field. Suggested-by: NPaolo Abeni <pabeni@redhat.com> Acked-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geliang Tang 提交于
This patch added a tracepoint in the packet scheduler function mptcp_subflow_get_send(). Suggested-by: NPaolo Abeni <pabeni@redhat.com> Acked-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geliang Tang 提交于
This patch moved the static function mptcp_subflow_active to protocol.h as an inline one. Acked-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-