Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 03 11月, 2014 2 次提交
    • A
      powerpc: Convert power off logic to pm_power_off · 9178ba29
      由 Alexander Graf 提交于 
      The generic Linux framework to power off the machine is a function pointer
called pm_power_off. The trick about this pointer is that device drivers can
potentially implement it rather than board files.

Today on powerpc we set pm_power_off to invoke our generic full machine power
off logic which then calls ppc_md.power_off to invoke machine specific power
off.

However, when we want to add a power off GPIO via the "gpio-poweroff" driver,
this card house falls apart. That driver only registers itself if pm_power_off
is NULL to ensure it doesn't override board specific logic. However, since we
always set pm_power_off to the generic power off logic (which will just not
power off the machine if no ppc_md.power_off call is implemented), we can't
implement power off via the generic GPIO power off driver.

To fix this up, let's get rid of the ppc_md.power_off logic and just always use
pm_power_off as was intended. Then individual drivers such as the GPIO power off
driver can implement power off logic via that function pointer.

With this patch set applied and a few patches on top of QEMU that implement a
power off GPIO on the virt e500 machine, I can successfully turn off my virtual
machine after halt.
Signed-off-by: NAlexander Graf <agraf@suse.de>
[mpe: Squash into one patch and update changelog based on cover letter]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
      9178ba29
    • C
      powerpc: Replace __get_cpu_var uses · 69111bac
      由 Christoph Lameter 提交于 
      This still has not been merged and now powerpc is the only arch that does
not have this change. Sorry about missing linuxppc-dev before.

V2->V2
  - Fix up to work against 3.18-rc1

__get_cpu_var() is used for multiple purposes in the kernel source. One of
them is address calculation via the form &__get_cpu_var(x).  This calculates
the address for the instance of the percpu variable of the current processor
based on an offset.

Other use cases are for storing and retrieving data from the current
processors percpu area.  __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.

__get_cpu_var() is defined as :

__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.

this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.

This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset.  Thereby address calculations are avoided and less registers
are used when code is generated.

At the end of the patch set all uses of __get_cpu_var have been removed so
the macro is removed too.

The patch set includes passes over all arches as well. Once these operations
are used throughout then specialized macros can be defined in non -x86
arches as well in order to optimize per cpu access by f.e.  using a global
register that may be set to the per cpu base.

Transformations done to __get_cpu_var()

1. Determine the address of the percpu instance of the current processor.

	DEFINE_PER_CPU(int, y);
	int *x = &__get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(&y);

2. Same as #1 but this time an array structure is involved.

	DEFINE_PER_CPU(int, y[20]);
	int *x = __get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(y);

3. Retrieve the content of the current processors instance of a per cpu
variable.

	DEFINE_PER_CPU(int, y);
	int x = __get_cpu_var(y)

   Converts to

	int x = __this_cpu_read(y);

4. Retrieve the content of a percpu struct

	DEFINE_PER_CPU(struct mystruct, y);
	struct mystruct x = __get_cpu_var(y);

   Converts to

	memcpy(&x, this_cpu_ptr(&y), sizeof(x));

5. Assignment to a per cpu variable

	DEFINE_PER_CPU(int, y)
	__get_cpu_var(y) = x;

   Converts to

	__this_cpu_write(y, x);

6. Increment/Decrement etc of a per cpu variable

	DEFINE_PER_CPU(int, y);
	__get_cpu_var(y)++

   Converts to

	__this_cpu_inc(y)

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Paul Mackerras <paulus@samba.org>
Signed-off-by: NChristoph Lameter <cl@linux.com>
[mpe: Fix build errors caused by set/or_softirq_pending(), and rework
      assignment in __set_breakpoint() to use memcpy().]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
      69111bac
  3. 02 11月, 2014 4 次提交
    • P
      KVM: vmx: defer load of APIC access page address during reset · a73896cb
      由 Paolo Bonzini 提交于 
      Most call paths to vmx_vcpu_reset do not hold the SRCU lock.  Defer loading
the APIC access page to the next vmentry.

This avoids the following lockdep splat:

[ INFO: suspicious RCU usage. ]
3.18.0-rc2-test2+ #70 Not tainted
-------------------------------
include/linux/kvm_host.h:474 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by qemu-system-x86/2371:
 #0:  (&vcpu->mutex){+.+...}, at: [<ffffffffa037d800>] vcpu_load+0x20/0xd0 [kvm]

stack backtrace:
CPU: 4 PID: 2371 Comm: qemu-system-x86 Not tainted 3.18.0-rc2-test2+ #70
Hardware name: Dell Inc. OptiPlex 9010/0M9KCM, BIOS A12 01/10/2013
 0000000000000001 ffff880209983ca8 ffffffff816f514f 0000000000000000
 ffff8802099b8990 ffff880209983cd8 ffffffff810bd687 00000000000fee00
 ffff880208a2c000 ffff880208a10000 ffff88020ef50040 ffff880209983d08
Call Trace:
 [<ffffffff816f514f>] dump_stack+0x4e/0x71
 [<ffffffff810bd687>] lockdep_rcu_suspicious+0xe7/0x120
 [<ffffffffa037d055>] gfn_to_memslot+0xd5/0xe0 [kvm]
 [<ffffffffa03807d3>] __gfn_to_pfn+0x33/0x60 [kvm]
 [<ffffffffa0380885>] gfn_to_page+0x25/0x90 [kvm]
 [<ffffffffa038aeec>] kvm_vcpu_reload_apic_access_page+0x3c/0x80 [kvm]
 [<ffffffffa08f0a9c>] vmx_vcpu_reset+0x20c/0x460 [kvm_intel]
 [<ffffffffa039ab8e>] kvm_vcpu_reset+0x15e/0x1b0 [kvm]
 [<ffffffffa039ac0c>] kvm_arch_vcpu_setup+0x2c/0x50 [kvm]
 [<ffffffffa037f7e0>] kvm_vm_ioctl+0x1d0/0x780 [kvm]
 [<ffffffff810bc664>] ? __lock_is_held+0x54/0x80
 [<ffffffff812231f0>] do_vfs_ioctl+0x300/0x520
 [<ffffffff8122ee45>] ? __fget+0x5/0x250
 [<ffffffff8122f0fa>] ? __fget_light+0x2a/0xe0
 [<ffffffff81223491>] SyS_ioctl+0x81/0xa0
 [<ffffffff816fed6d>] system_call_fastpath+0x16/0x1b
Reported-by: NTakashi Iwai <tiwai@suse.de>
Reported-by: NAlexei Starovoitov <alexei.starovoitov@gmail.com>
Reviewed-by: NWanpeng Li <wanpeng.li@linux.intel.com>
Tested-by: NWanpeng Li <wanpeng.li@linux.intel.com>
Fixes: 38b99173Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      a73896cb
    • J
      KVM: nVMX: Disable preemption while reading from shadow VMCS · 282da870
      由 Jan Kiszka 提交于 
      In order to access the shadow VMCS, we need to load it. At this point,
vmx->loaded_vmcs->vmcs and the actually loaded one start to differ. If
we now get preempted by Linux, vmx_vcpu_put and, on return, the
vmx_vcpu_load will work against the wrong vmcs. That can cause
copy_shadow_to_vmcs12 to corrupt the vmcs12 state.

Fix the issue by disabling preemption during the copy operation.
copy_vmcs12_to_shadow is safe from this issue as it is executed by
vmx_vcpu_run when preemption is already disabled before vmentry.

This bug is exposed by running Jailhouse within KVM on CPUs with
shadow VMCS support.  Jailhouse never expects an interrupt pending
vmexit, but the bug can cause it if, after copy_shadow_to_vmcs12
is preempted, the active VMCS happens to have the virtual interrupt
pending flag set in the CPU-based execution controls.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      282da870
    • N
      KVM: x86: Fix far-jump to non-canonical check · 7e46dddd
      由 Nadav Amit 提交于 
      Commit d1442d85 ("KVM: x86: Handle errors when RIP is set during far
jumps") introduced a bug that caused the fix to be incomplete.  Due to
incorrect evaluation, far jump to segment with L bit cleared (i.e., 32-bit
segment) and RIP with any of the high bits set (i.e, RIP[63:32] != 0) set may
not trigger #GP.  As we know, this imposes a security problem.

In addition, the condition for two warnings was incorrect.

Fixes: d1442d85Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
[Add #ifdef CONFIG_X86_64 to avoid complaints of undefined behavior. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      7e46dddd
    • D
      powerpc: use device_online/offline() instead of cpu_up/down() · 10ccaf17
      由 Dan Streetman 提交于 
      In powerpc pseries platform dlpar operations, use device_online() and
device_offline() instead of cpu_up() and cpu_down().

Calling cpu_up/down() directly does not update the cpu device offline
field, which is used to online/offline a cpu from sysfs. Calling
device_online/offline() instead keeps the sysfs cpu online value
correct. The hotplug lock, which is required to be held when calling
device_online/offline(), is already held when dlpar_online/offline_cpu()
are called, since they are called only from cpu_probe|release_store().

This patch fixes errors on phyp (PowerVM) systems that have cpu(s)
added/removed using dlpar operations; without this patch, the
/sys/devices/system/cpu/cpuN/online nodes do not correctly show the
online state of added/removed cpus.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Fixes: 0902a904 ("Driver core: Use generic offline/online for CPU offline/online")
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
      10ccaf17
  5. 01 11月, 2014 2 次提交
    • A
      x86_64, entry: Fix out of bounds read on sysenter · 653bc77a
      由 Andy Lutomirski 提交于 
      Rusty noticed a Really Bad Bug (tm) in my NT fix.  The entry code
reads out of bounds, causing the NT fix to be unreliable.  But, and
this is much, much worse, if your stack is somehow just below the
top of the direct map (or a hole), you read out of bounds and crash.

Excerpt from the crash:

[    1.129513] RSP: 0018:ffff88001da4bf88  EFLAGS: 00010296

  2b:*    f7 84 24 90 00 00 00     testl  $0x4000,0x90(%rsp)

That read is deterministically above the top of the stack.  I
thought I even single-stepped through this code when I wrote it to
check the offset, but I clearly screwed it up.

Fixes: 8c7aa698 ("x86_64, entry: Filter RFLAGS.NT on entry from userspace")
Reported-by: NRusty Russell <rusty@ozlabs.org>
Cc: stable@vger.kernel.org
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      653bc77a
    • T
      net: smc91x: Fix gpios for device tree based booting · 7d2911c4
      由 Tony Lindgren 提交于 
      With legacy booting, the platform init code was taking care of
the configuring of GPIOs. With device tree based booting, things
may or may not work depending what bootloader has configured or
if the legacy platform code gets called.

Let's add support for the pwrdn and reset GPIOs to the smc91x
driver to fix the issues of smc91x not working properly when
booted in device tree mode.

And let's change n900 to use these settings as some versions
of the bootloader do not configure things properly causing
errors.
Reported-by: NKevin Hilman <khilman@linaro.org>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7d2911c4
  7. 31 10月, 2014 2 次提交
  9. 30 10月, 2014 8 次提交
  11. 29 10月, 2014 14 次提交
  13. 28 10月, 2014 8 次提交