Refactor the unkeyed permutation part of chacha20_block() into its own
function, then add hchacha20_block() which is the ChaCha equivalent of
HSalsa20 and is an intermediate step towards XChaCha20 (see
https://cr.yp.to/snuffle/xsalsa-20081128.pdf).  HChaCha20 skips the
final addition of the initial state, and outputs only certain words of
the state.  It should not be used for streaming directly.
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NMartin Willi <martin@strongswan.org>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

'shash' algorithms are always synchronous, so passing CRYPTO_ALG_ASYNC
in the mask to crypto_alloc_shash() has no effect.  Many users therefore
already don't pass it, but some still do.  This inconsistency can cause
confusion, especially since the way the 'mask' argument works is
somewhat counterintuitive.

Thus, just remove the unneeded CRYPTO_ALG_ASYNC flags.

This patch shouldn't change any actual behavior.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

'cipher' algorithms (single block ciphers) are always synchronous, so
passing CRYPTO_ALG_ASYNC in the mask to crypto_alloc_cipher() has no
effect.  Many users therefore already don't pass it, but some still do.
This inconsistency can cause confusion, especially since the way the
'mask' argument works is somewhat counterintuitive.

Thus, just remove the unneeded CRYPTO_ALG_ASYNC flags.

This patch shouldn't change any actual behavior.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Some algorithms initialize their .cra_list prior to registration.
But this is unnecessary since crypto_register_alg() will overwrite
.cra_list when adding the algorithm to the 'crypto_alg_list'.
Apparently the useless assignment has just been copy+pasted around.

So, remove the useless assignments.

Exception: paes_s390.c uses cra_list to check whether the algorithm is
registered or not, so I left that as-is for now.

This patch shouldn't change any actual behavior.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove the unnecessary setting of CRYPTO_ALG_TYPE_SKCIPHER.
Commit 2c95e6d9 ("crypto: skcipher - remove useless setting of type
flags") took care of this everywhere else, but a few more instances made
it into the tree at about the same time.  Squash them before they get
copy+pasted around again.

This patch shouldn't change any actual behavior.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Acked-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

ecc_point_mult is supposed to be used with a regularized scalar,
otherwise, it's possible to deduce the position of the top bit of the
scalar with timing attack. This is important when the scalar is a
private key.

ecc_point_mult is already using a regular algorithm (i.e. having an
operation flow independent of the input scalar) but regularization step
is not implemented.

Arrange scalar to always have fixed top bit by adding a multiple of the
curve order (n).

References:
The constant time regularization step is based on micro-ecc by Kenneth
MacKay and also referenced in the literature (Bernstein, D. J., & Lange,
T. (2017). Montgomery curves and the Montgomery ladder. (Cryptology
ePrint Archive; Vol. 2017/293). s.l.: IACR. Chapter 4.6.2.)
Signed-off-by: NVitaly Chikunov <vt@altlinux.org>
Cc: kernel-hardening@lists.openwall.com
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This variant builds upon the idea of the 2-block AVX2 variant that
shuffles words after each round. The shuffling has a rather high latency,
so the arithmetic units are not optimally used.

Given that we have plenty of registers in AVX, this version parallelizes
the 2-block variant to do four blocks. While the first two blocks are
shuffling, the CPU can do the XORing on the second two blocks and
vice-versa, which makes this version much faster than the SSSE3 variant
for four blocks. The latter is now mostly for systems that do not have
AVX2, but there it is the work-horse, so we keep it in place.

The partial XORing function trailer is very similar to the AVX2 2-block
variant. While it could be shared, that code segment is rather short;
profiling is also easier with the trailer integrated, so we keep it per
function.
Signed-off-by: NMartin Willi <martin@strongswan.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This variant uses the same principle as the single block SSSE3 variant
by shuffling the state matrix after each round. With the wider AVX
registers, we can do two blocks in parallel, though.

This function can increase performance and efficiency significantly for
lengths that would otherwise require a 4-block function.
Signed-off-by: NMartin Willi <martin@strongswan.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Now that all block functions support partial lengths, engage the wider
block sizes more aggressively. This prevents using smaller block
functions multiple times, where the next larger block function would
have been faster.
Signed-off-by: NMartin Willi <martin@strongswan.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add a length argument to the eight block function for AVX2, so the
block function may XOR only a partial length of eight blocks.

To avoid unnecessary operations, we integrate XORing of the first four
blocks in the final lane interleaving; this also avoids some work in
the partial lengths path.
Signed-off-by: NMartin Willi <martin@strongswan.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add a length argument to the quad block function for SSSE3, so the
block function may XOR only a partial length of four blocks.

As we already have the stack set up, the partial XORing does not need
to. This gives a slightly different function trailer, so we keep that
separate from the 1-block function.
Signed-off-by: NMartin Willi <martin@strongswan.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add a length argument to the single block function for SSSE3, so the
block function may XOR only a partial length of the full block. Given
that the setup code is rather cheap, the function does not process more
than one block; this allows us to keep the block function selection in
the C glue code.

The required branching does not negatively affect performance for full
block sizes. The partial XORing uses simple "rep movsb" to copy the
data before and after doing XOR in SSE. This is rather efficient on
modern processors; movsw can be slightly faster, but the additional
complexity is probably not worth it.
Signed-off-by: NMartin Willi <martin@strongswan.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Adopt the SPDX license identifier headers to ease license compliance
management. While we are at this fix the comment style, too.

Cc: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: NEric Anholt <eric@anholt.net>
Acked-by: NLubomir Rintel <lkundrak@v3.sk>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Trivial fix to clean up an indentation issue
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add support for Chacha20 + Poly1305 combined AEAD:
-generic (rfc7539)
-IPsec (rfc7634 - known as rfc7539esp in the kernel)
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add support for Chacha20 + Poly1305 combined AEAD:
-generic (rfc7539)
-IPsec (rfc7634 - known as rfc7539esp in the kernel)
Signed-off-by: NCristian Stoica <cristian.stoica@nxp.com>
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Move CHACHAPOLY_IV_SIZE to header file, so it can be reused.
Signed-off-by: NCristian Stoica <cristian.stoica@nxp.com>
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add support for ChaCha20 skcipher algorithm.
Signed-off-by: NCarmen Iorga <carmen.iorga@nxp.com>
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Era 10 changes the register map.

The updates that affect the drivers:
-new version registers are added
-DBG_DBG[deco_state] field is moved to a new register -
DBG_EXEC[19:16] @ 8_0E3Ch.
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

On 6ull and 6sll the DCP block has a clock which needs to be explicitly
enabled.

Add minimal handling for this at probe/remove time.
Signed-off-by: NLeonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: NFabio Estevam <festevam@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Explicit clock enabling is required on 6sll and 6ull so mention that
standard clock bindings are used.
Signed-off-by: NLeonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: NFabio Estevam <festevam@gmail.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add testmgr and tcrypt tests and vectors for Streebog hash function
from RFC 6986 and GOST R 34.11-2012, for HMAC-Streebog vectors are
from RFC 7836 and R 50.1.113-2016.

Cc: linux-integrity@vger.kernel.org
Signed-off-by: NVitaly Chikunov <vt@altlinux.org>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Register Streebog hash function in Hash Info arrays to let IMA use
it for its purposes.

Cc: linux-integrity@vger.kernel.org
Signed-off-by: NVitaly Chikunov <vt@altlinux.org>
Reviewed-by: NMimi Zohar <zohar@linux.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add GOST/IETF Streebog hash function (GOST R 34.11-2012, RFC 6986)
generic hash transformation.

Cc: linux-integrity@vger.kernel.org
Signed-off-by: NVitaly Chikunov <vt@altlinux.org>
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove asm/hwcap.h which is included more than once
Signed-off-by: NBrajeswar Ghosh <brajeswar.linux@gmail.com>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove setkey() callback handler for normal/non key
hash algorithms and keep it for AES-CBC/CMAC which needs key.

Fixes: 9d12ba86 ("crypto: brcm - Add Broadcom SPU driver")
Signed-off-by: NRaveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

cts(cbc(aes)) as used in the kernel has been added to NIST
standard as CBC-CS3. Document it as such.
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Suggested-by: NStephan Mueller <smueller@chronox.de>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Currently used scalar multiplication algorithm (Matthieu Rivain, 2011)
have invalid values for scalar == 1, n-1, and for regularized version
n-2, which was previously not checked. Verify that they are not used as
private keys.
Signed-off-by: NVitaly Chikunov <vt@altlinux.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

As per Sp800-38A addendum from Oct 2010[1], cts(cbc(aes)) is
allowed as a FIPS mode algorithm. Mark it as such.

[1] https://csrc.nist.gov/publications/detail/sp/800-38a/addendum/finalSigned-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Reviewed-by: NStephan Mueller <smueller@chronox.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

There have been a pretty ridiculous number of issues with initializing
the report structures that are copied to userspace by NETLINK_CRYPTO.
Commit 4473710d ("crypto: user - Prepare for CRYPTO_MAX_ALG_NAME
expansion") replaced some strncpy()s with strlcpy()s, thereby
introducing information leaks.  Later two other people tried to replace
other strncpy()s with strlcpy() too, which would have introduced even
more information leaks:

    - https://lore.kernel.org/patchwork/patch/954991/
    - https://patchwork.kernel.org/patch/10434351/

Commit cac5818c ("crypto: user - Implement a generic crypto
statistics") also uses the buggy strlcpy() approach and therefore leaks
uninitialized memory to userspace.  A fix was proposed, but it was
originally incomplete.

Seeing as how apparently no one can get this right with the current
approach, change all the reporting functions to:

- Start by memsetting the report structure to 0.  This guarantees it's
  always initialized, regardless of what happens later.
- Initialize all strings using strscpy().  This is safe after the
  memset, ensures null termination of long strings, avoids unnecessary
  work, and avoids the -Wstringop-truncation warnings from gcc.
- Use sizeof(var) instead of sizeof(type).  This is more robust against
  copy+paste errors.

For simplicity, also reuse the -EMSGSIZE return value from nla_put().
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The acomp, akcipher, and kpp algorithm types already have .report
methods defined, so there's no need to duplicate this functionality in
crypto_user itself; the duplicate functions are actually never executed.
Remove the unused code.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Trivial fix to clean up varous indentation issue
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Passing string 'name' as the format specifier is potentially hazardous
because name could (although very unlikely to) have a format specifier
embedded in it causing issues when parsing the non-existent arguments
to these.  Follow best practice by using the "%s" format string for
the string 'name'.

Cleans up clang warning:
crypto/pcrypt.c:397:40: warning: format string is not a string literal
(potentially insecure) [-Wformat-security]

Fixes: a3fb1e33 ("pcrypt: Added sysfs interface to pcrypt")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add AES128/192/256-CFB testvectors from NIST SP800-38A.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

crypto_cfb_decrypt_segment() incorrectly XOR'ed generated keystream with
IV, rather than with data stream, resulting in incorrect decryption.
Test vectors will be added in the next patch.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In crypto_alloc_context(), a DMA pool is allocated through dma_pool_alloc()
to hold the crypto context. The meta data of the DMA pool, including the
pool used for the allocation 'ndev->ctx_pool' and the base address of the
DMA pool used by the device 'dma', are then stored to the beginning of the
pool. These meta data are eventually used in crypto_free_context() to free
the DMA pool through dma_pool_free(). However, given that the DMA pool can
also be accessed by the device, a malicious device can modify these meta
data, especially when the device is controlled to deploy an attack. This
can cause an unexpected DMA pool free failure.

To avoid the above issue, this patch introduces a new structure
crypto_ctx_hdr and a new field chdr in the structure nitrox_crypto_ctx hold
the meta data information of the DMA pool after the allocation. Note that
the original structure ctx_hdr is not changed to ensure the compatibility.

Cc: <stable@vger.kernel.org>
Signed-off-by: NWenwen Wang <wang6495@umn.edu>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add support for SM3 cipher in CryptoCell 713.
Signed-off-by: NYael Chemla <yael.chemla@foss.arm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

encapsulate set_cipher_mode call with another api,
preparation for specific hash behavior as needed in later patches
when SM3 introduced.
Signed-off-by: NYael Chemla <yael.chemla@foss.arm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Adjust hash length such that it will not be fixed and general for all algs.
Instead make it suitable for certain context information.
This is preparation for SM3 support.
Signed-off-by: NYael Chemla <yael.chemla@foss.arm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add support for SM4 cipher in CryptoCell 713.
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>