Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 23 4月, 2016 5 次提交
  3. 15 4月, 2016 1 次提交
  5. 13 4月, 2016 4 次提交
  7. 11 4月, 2016 3 次提交
    • P
      KVM: x86: mask CPUID(0xD,0x1).EAX against host value · 316314ca
      由 Paolo Bonzini 提交于 
      This ensures that the guest doesn't see XSAVE extensions
(e.g. xgetbv1 or xsavec) that the host lacks.

Cc: stable@vger.kernel.org
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      316314ca
    • D
      kvm: x86: do not leak guest xcr0 into host interrupt handlers · fc5b7f3b
      由 David Matlack 提交于 
      An interrupt handler that uses the fpu can kill a KVM VM, if it runs
under the following conditions:
 - the guest's xcr0 register is loaded on the cpu
 - the guest's fpu context is not loaded
 - the host is using eagerfpu

Note that the guest's xcr0 register and fpu context are not loaded as
part of the atomic world switch into "guest mode". They are loaded by
KVM while the cpu is still in "host mode".

Usage of the fpu in interrupt context is gated by irq_fpu_usable(). The
interrupt handler will look something like this:

if (irq_fpu_usable()) {
        kernel_fpu_begin();

        [... code that uses the fpu ...]

        kernel_fpu_end();
}

As long as the guest's fpu is not loaded and the host is using eager
fpu, irq_fpu_usable() returns true (interrupted_kernel_fpu_idle()
returns true). The interrupt handler proceeds to use the fpu with
the guest's xcr0 live.

kernel_fpu_begin() saves the current fpu context. If this uses
XSAVE[OPT], it may leave the xsave area in an undesirable state.
According to the SDM, during XSAVE bit i of XSTATE_BV is not modified
if bit i is 0 in xcr0. So it's possible that XSTATE_BV[i] == 1 and
xcr0[i] == 0 following an XSAVE.

kernel_fpu_end() restores the fpu context. Now if any bit i in
XSTATE_BV == 1 while xcr0[i] == 0, XRSTOR generates a #GP. The
fault is trapped and SIGSEGV is delivered to the current process.

Only pre-4.2 kernels appear to be vulnerable to this sequence of
events. Commit 653f52c3 ("kvm,x86: load guest FPU context more eagerly")
from 4.2 forces the guest's fpu to always be loaded on eagerfpu hosts.

This patch fixes the bug by keeping the host's xcr0 loaded outside
of the interrupts-disabled region where KVM switches into guest mode.

Cc: stable@vger.kernel.org
Suggested-by: NAndy Lutomirski <luto@amacapital.net>
Signed-off-by: NDavid Matlack <dmatlack@google.com>
[Move load after goto cancel_injection. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      fc5b7f3b
    • X
      KVM: MMU: fix permission_fault() · 7a98205d
      由 Xiao Guangrong 提交于 
      kvm-unit-tests complained about the PFEC is not set properly, e.g,:
test pte.rw pte.d pte.nx pde.p pde.rw pde.pse user fetch: FAIL: error code 15
expected 5
Dump mapping: address: 0x123400000000
------L4: 3e95007
------L3: 3e96007
------L2: 2000083

It's caused by the reason that PFEC returned to guest is copied from the
PFEC triggered by shadow page table

This patch fixes it and makes the logic of updating errcode more clean
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
[Do not assume pfec.p=1. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      7a98205d
  9. 08 4月, 2016 1 次提交
  11. 07 4月, 2016 1 次提交
  13. 05 4月, 2016 1 次提交
    • L
      kvm: x86: make lapic hrtimer pinned · 61abdbe0
      由 Luiz Capitulino 提交于 
      When a vCPU runs on a nohz_full core, the hrtimer used by
the lapic emulation code can be migrated to another core.
When this happens, it's possible to observe milisecond
latency when delivering timer IRQs to KVM guests.

The huge latency is mainly due to the fact that
apic_timer_fn() expects to run during a kvm exit. It
sets KVM_REQ_PENDING_TIMER and let it be handled on kvm
entry. However, if the timer fires on a different core,
we have to wait until the next kvm exit for the guest
to see KVM_REQ_PENDING_TIMER set.

This problem became visible after commit 9642d18e. This
commit changed the timer migration code to always attempt
to migrate timers away from nohz_full cores. While it's
discussable if this is correct/desirable (I don't think
it is), it's clear that the lapic emulation code has
a requirement on firing the hrtimer in the same core
where it was started. This is achieved by making the
hrtimer pinned.

Lastly, note that KVM has code to migrate timers when a
vCPU is scheduled to run in different core. However, this
forced migration may fail. When this happens, we can have
the same problem. If we want 100% correctness, we'll have
to modify apic_timer_fn() to cause a kvm exit when it runs
on a different core than the vCPU. Not sure if this is
possible.

Here's a reproducer for the issue being fixed:

 1. Set all cores but core0 to be nohz_full cores
 2. Start a guest with a single vCPU
 3. Trace apic_timer_fn() and kvm_inject_apic_timer_irqs()

You'll see that apic_timer_fn() will run in core0 while
kvm_inject_apic_timer_irqs() runs in a different core. If
you get both on core0, try running a program that takes 100%
of the CPU and pin it to core0 to force the vCPU out.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      61abdbe0
  15. 02 4月, 2016 2 次提交
  17. 01 4月, 2016 4 次提交
    • Y
      kvm: set page dirty only if page has been writable · 14f47605
      由 Yu Zhao 提交于 
      In absence of shadow dirty mask, there is no need to set page dirty
if page has never been writable. This is a tiny optimization but
good to have for people who care much about dirty page tracking.
Signed-off-by: NYu Zhao <yuzhao@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      14f47605
    • P
      KVM: x86: reduce default value of halt_poll_ns parameter · 14ebda33
      由 Paolo Bonzini 提交于 
      Windows lets applications choose the frequency of the timer tick,
and in Windows 10 the maximum rate was changed from 1024 Hz to
2048 Hz.  Unfortunately, because of the way the Windows API
works, most applications who need a higher rate than the default
64 Hz will just do

   timeGetDevCaps(&tc, sizeof(tc));
   timeBeginPeriod(tc.wPeriodMin);

and pick the maximum rate.  This causes very high CPU usage when
playing media or games on Windows 10, even if the guest does not
actually use the CPU very much, because the frequent timer tick
causes halt_poll_ns to kick in.

There is no really good solution, especially because Microsoft
could sooner or later bump the limit to 4096 Hz, but for now
the best we can do is lower a bit the upper limit for
halt_poll_ns. :-(
Reported-by: NJon Panozzo <jonp@lime-technology.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      14ebda33
    • P
      KVM: Hyper-V: do not do hypercall userspace exits if SynIC is disabled · a2b5c3c0
      由 Paolo Bonzini 提交于 
      If SynIC is disabled, there is nothing that userspace can do to
handle these exits; on the other hand, userspace probably will
not know about KVM_EXIT_HYPERV_HCALL and complain about it or
even exit.  Just prevent anything bad from happening by handling
the hypercall in KVM and returning an "invalid hypercall" code.

Fixes: 83326e43
Cc: Andrey Smetanin <irqlevel@gmail.com>
Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      a2b5c3c0
    • Y
      KVM: x86: Inject pending interrupt even if pending nmi exist · 321c5658
      由 Yuki Shibuya 提交于 
      Non maskable interrupts (NMI) are preferred to interrupts in current
implementation. If a NMI is pending and NMI is blocked by the result
of nmi_allowed(), pending interrupt is not injected and
enable_irq_window() is not executed, even if interrupts injection is
allowed.

In old kernel (e.g. 2.6.32), schedule() is often called in NMI context.
In this case, interrupts are needed to execute iret that intends end
of NMI. The flag of blocking new NMI is not cleared until the guest
execute the iret, and interrupts are blocked by pending NMI. Due to
this, iret can't be invoked in the guest, and the guest is starved
until block is cleared by some events (e.g. canceling injection).

This patch injects pending interrupts, when it's allowed, even if NMI
is blocked. And, If an interrupts is pending after executing
inject_pending_event(), enable_irq_window() is executed regardless of
NMI pending counter.

Cc: stable@vger.kernel.org
Signed-off-by: NYuki Shibuya <shibuya.yk@ncos.nec.co.jp>
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      321c5658
  19. 31 3月, 2016 12 次提交
  21. 29 3月, 2016 6 次提交