The eDP spec defines some points where after you do action A, you have
to wait some time before action B. The thing is that in our driver
action B does not happen exactly after action A, but we still use
msleep() calls directly. What this patch does is that we record the
timestamp of when action A happened, then, just before action B, we
look at how much time has passed and only sleep the remaining amount
needed.

With this change, I am able to save about 5-20ms (out of the total
200ms) of the backlight_off delay and completely skip the 1ms
backlight_on delay. The 600ms vdd_off delay doesn't happen during
normal usage anymore due to a previous patch.

v2: - Rename ironlake_wait_jiffies_delay to intel_wait_until_after and
      move it to intel_display.c
    - Fix the msleep call: diff is in jiffies
v3: - Use "tmp_jiffies" so we don't need to worry about the value of
      "jiffies" advancing while we're doing the math.
v4: - Rename function again.
    - Move function to i915_drv.h.
    - Store last_power_cycle at edp_panel_off too.
    - Use msecs_to_jiffies_timeout, then replace the msleep with an
      open-coded version that avoids the extra +1 jiffy.
    - Try to add units to every variable name so we don't confuse
      jiffies with milliseconds.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Our driver has two different ways of waiting for panel power
sequencing delays. One of these ways is through
ironlake_wait_panel_status, which implicitly uses the values written
to our registers. The other way is through the functions that call
intel_wait_until_after, and on this case we do direct msleep() calls
on the intel_dp->xxx_delay variables.

Function intel_dp_init_panel_power_sequencer is responsible for
initializing the _delay variables and deciding which values we need to
write to the registers, but it does not write these values to the
registers. Only at intel_dp_init_panel_power_sequencer_registers we
actually do this write.

Then problem is that when we call intel_dp_i2c_init, we will get some
I2C calls, which will trigger a VDD enable, which will make use of the
panel power sequencing registers and the _delay variables, so we need
to have both ready by this time. Today, when this happens, the _delay
variables are zero (because they were not computed) and the panel
power sequence registers contain whatever values were written by the
BIOS (which are usually correct).

What this patch does is to make sure that function
intel_dp_init_panel_power_sequencer is called earlier, so by the time
we call intel_dp_i2c_init, the _delay variables will already be
initialized. The actual registers won't contain their final values,
but at least they will contain the values set by the BIOS.

The good side is that we were reading the values, but were not using
them for anything (because we were just skipping the msleep(0) calls),
so this "fix" shouldn't fix any real existing bugs. I was only able to
identify the problem because I added some debug code to check how much
time time we were saving with my previous patch.

Regression introduced by:
    commit ed92f0b2
    Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
    Date:   Wed Jun 12 17:27:24 2013 -0300
        drm/i915: extract intel_edp_init_connector

v2: - Rewrite commit message.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This was forgotten in

commit 565ee389
Author: Jani Nikula <jani.nikula@intel.com>
Date:   Wed Nov 13 12:56:29 2013 +0200

    drm/i915: do not save/restore backlight registers in KMS

Since the confusion was likely due to the duplicated definition for
this pci config register, let's unify that, too.

Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Atm, we don't print these events for all platforms and for VLV/G4X we
also print them for DP AUX completion events which is unnecessary spam.
Fix both issues.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Those are two distinct concepts. Just use a comment to remind us to
remove that W/A at some point.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

crtc->new_config is only relevant for pipes that are going to be active
post-modeset. Set the pointer to NULL for all pipes that are going to
be disabled. This is done to help catch bugs where some piece of code
would go looking at crtc->new_config even if the data there is stale.

v2: Clear new_config in disable_crtc_nofb() too (Imre)
Suggested-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If the first modeset operation fails, we will attempt to restore the
previous configuration that we read out from the hardware. But as we
don't yet reconstruct the framebuffer information, we end up calling
the modeset code with an enabled crtc but with fb==NULL. This will
lead to an oops within the modeset code.

Check for NULL fb when restoring the configuration, and instead of
oopsing simply disable the pipe.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On VLV we need to compute the new cdclk before we've updated the current
state. The code achieved that in a somewhat complex way. Now that we
have new_enabled and new_config, we can simplify the code quite a bit.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add a new_config pointer to intel_crtc which will point to the new pipe
config for said crtc while intel_crtc.config will still contain the old
config during first parts of the modeset operation. This is a step
towards having the entire new state available during the compute phase,
so that we can make accurate decisions about global resource usage.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add 'new_enabled' to intel_crtc and precompute it alongside new_encoder
and new_crtc. This will allow making decisions about shared resources
that are affected by the set of active pipes, before we've clobbered
anything for real.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This reverts commit 446f2545.

I've left the masking in the pageflip code since that seems to be some
useful piece of preemptive robustness.

Iirc I've merged this patch under the assumption that the BIOS leaves
some random gunk in the lower bits and gets unhappy if we trample on
them. We have quite a few case like this, so this made sense.

Now I've just learned that there's actual hardware features bits in
the low 12 bits, and the kernel needs to preserve them to allow a
userspace blob to do its job. Given Dave Airlie's clear stance on
userspace blob drivers I've quickly chatted with him and he doesn't
seem too happy. So let's revert this.

If there are indeed bits that we must preserve in this range then we
can ressurrect this patch, but with proper documentation for those
bits supplied. And we probably also need to think a bit about
interactions with our driver.

Cc: Armin Reese <armin.c.reese@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Dave Airlie <airlied@linux.ie>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add new definitions for hotplug live status bits for VLV2 since they're
in reverse order from the gen4x ones.

Changelog:
- Restored gen4 bit definitions
- Added new definitions for VLV2
- Added platform check for IS_VALLEYVIEW() in dp_detect to use the correct
  bit defintions
- Replaced a lost trailing brace for the added switch()
Signed-off-by: NTodd Previte <tprevite@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73951
[danvet: Switch to _VLV postfix instead of prefix and regroupg
comments again so that the g4x warning is right next to those defines.
Also add a _G4X suffix for those special ones. Also cc stable.]
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Nothing's changed here; we just need to bump the generation check.
Signed-off-by: NKenneth Graunke <kenneth@whitecape.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Since an old pageflip will keep its scanout buffer object pinned until
it has executed its unpin task on the common workqueue, we can clog up
our GGTT with stale pinned objects. As we cannot flush those workqueues
without dropping our locks, we have to resort to falling back to
userspace and telling them to repeat the operation in order to have a
chance to run our workqueues and free up the required memory. If we
fail, then we are forced to report ENOSPC back to userspace causing the
operation to fail and best-case scenario is that it introduces temporary
corruption.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On older generations (gen2, gen3) the GPU requires fences for many
operations, such as blits. The display hardware also requires fences for
scanouts and this leads to a situation where an arbitrary number of
fences may be pinned by old scanouts following a pageflip but before we
have executed the unpin workqueue. This is unpredictable by userspace
and leads to random EDEADLK when submitting an otherwise benign
execbuffer. However, we can detect when we have an outstanding flip and
so cause userspace to wait upon their completion before finally
declaring that the system is starved of fences. This is really no worse
than forcing the GPU to stall waiting for older execbuffer to retire and
release their fences before we can reallocate them for the next
execbuffer.

v2: move the test for a pending fb unpin to a common routine for
later reuse during eviction

Reported-and-tested-by: dimon@gmx.net
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73696Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Atm after a failed link training we disable the DP port. This can happen
during a modeset-enable or a DP link re-establishment. The latter can be
a problem and we shouldn't disable the DP port, see the previous patch for
the reasoning. In the former case the right thing would be to disable
the DP port, but also the rest of the pipe.

As a stop-gap solution leave the DP port enabled in both cases. It is an
improvement on its own (avoiding HW lock ups) and the proper solution
for the first case requires a bigger change, so let's keep that on the
TODO list.

v2:
- fix explanation of change impact (Chris)
Suggested-by: NDaniel Vetter <daniel@ffwll.ch>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Currently if the DP link is lost (either because of a hot unplug, or
failed link status check) we disable the DP port, but leave the rest
of the pipe running. This is incompatible with the modeset disabling
sequence of some platforms/configurations. At least this is the case for
DP ports on the CPU as opposed to PCH.

Atm we'll also get a warning when we do a modeset disable after the
above link lost event, since we expect the DP port to be enabled at this
point (see the bugzilla ticket for the related dmesg).

Note that with this patch we'll still end up disabling the port, thanks
to the HPD uevent and subsequent modeset disable.

See also the next patch fixing the other half of this issue.

Solution suggested by Ville.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70570Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

My 855gm doesn't register the intel backlight but it still ends up
calling the backlight code to enable/disable the backlight via the
LVDS code. This leads to some WARNs due to backlight.max being 0.

Let's have intel_panel_enable_backlight() and intel_panel_disable_backlight()
check whether there's a backlight present or not.

Also move the backlight.present check from asle_set_backlight() into
intel_panel_set_backlight() for some extra symmetry.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Fix typo possibly leading to timed out DP aux transactions on ports C,D.

Introduced in:

Commmit 4aeebd74
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Oct 31 09:53:36 2013 +0100

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72210
Signed off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We need to defer the free request until the object/vma is capable of
being freed - or else we have a problem  when we try to destroy the
context.

The exact same issue is described and fixed here:
commit e2078043
Author: Ben Widawsky <ben@bwidawsk.net>
Date:   Fri Dec 6 14:11:22 2013 -0800

    drm/i915: Defer request freeing

I had this fix previously, but decided not to keep it for some reason I
can no longer remember.

gem_reset_stats is a really good test at hitting the problem.

For the inquisitive:
[  170.516392] ------------[ cut here ]------------
[  170.517227] WARNING: CPU: 1 PID: 105 at drivers/gpu/drm/drm_mm.c:578 drm_mm_takedown+0x2e/0x30 [drm]()
[  170.518064] Memory manager not clean during takedown.
[  170.518941] CPU: 1 PID: 105 Comm: kworker/1:1 Not tainted 3.13.0-rc4-BEN+ #28
[  170.519787] Hardware name: Hewlett-Packard HP EliteBook 8470p/179B, BIOS 68ICF Ver. F.02 04/27/2012
[  170.520662] Call Trace:
[  170.521517]  [<ffffffff814f0589>] dump_stack+0x4e/0x7a
[  170.522373]  [<ffffffff81049e6d>] warn_slowpath_common+0x7d/0xa0
[  170.523227]  [<ffffffff81049edc>] warn_slowpath_fmt+0x4c/0x50
[  170.524079]  [<ffffffffa06c414e>] drm_mm_takedown+0x2e/0x30 [drm]
[  170.524934]  [<ffffffffa07213f3>] gen6_ppgtt_cleanup+0x23/0x110
[i915]
[  170.525777]  [<ffffffffa07837ed>] ppgtt_release.part.5+0x24/0x29
[i915]
[  170.526603]  [<ffffffffa071aaa5>] i915_gem_context_free+0x195/0x1a0
[i915]
[  170.527423]  [<ffffffffa071189d>] i915_gem_free_request+0x9d/0xb0
[i915]
[  170.528247]  [<ffffffffa0718af9>] i915_gem_reset+0x1f9/0x3f0 [i915]
[  170.529065]  [<ffffffffa0700cce>] i915_reset+0x4e/0x180 [i915]
[  170.529870]  [<ffffffffa070829d>] i915_error_work_func+0xcd/0x120
[i915]
[  170.530666]  [<ffffffff8106c13a>] process_one_work+0x1fa/0x6d0
[  170.531453]  [<ffffffff8106c0d8>] ? process_one_work+0x198/0x6d0
[  170.532230]  [<ffffffff8106c72b>] worker_thread+0x11b/0x3a0
[  170.532996]  [<ffffffff8106c610>] ? process_one_work+0x6d0/0x6d0
[  170.533771]  [<ffffffff810743ef>] kthread+0xff/0x120
[  170.534548]  [<ffffffff810742f0>] ? insert_kthread_work+0x80/0x80
[  170.535322]  [<ffffffff814f97ac>] ret_from_fork+0x7c/0xb0
[  170.536089]  [<ffffffff810742f0>] ? insert_kthread_work+0x80/0x80
[  170.536847] ---[ end trace 3d4c12892e42d58f ]---

v2: Whitespace fix. (Chris)

Note: This is a bug that only hits the ppgtt topic branch but I've
figured that doing the request cleanup in this order is generally the
right thing to do.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
[danvet: Add a code comment to clarify what's actually going on since
the lifetime rules aroung ppgtt cleanup are ... fuzzy a best atm. Also
add a note about why we need this.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The opregion notification for runtime suspend is currently D1, not D3.
Signed-off-by: NKristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It ought to work ok in 3.14.  We have some fun stuff coming after that,
but all the basics are in place now and seem relatively stable.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Acked by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is user-triggerable and hence we should not allow it to spam
dmesg. Also, it upsets the nice dmesg tracking piglit does.

Note that this is just extra debugging information, mostly
unwanted, in case of a hang and that there is a separate message to the
user giving instructions on how to report a bug for a GPU hang.

v2: Add note as suggests in Chris' reply.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72740
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

A couple patches in the upcoming rework of semaphores will break if
semaphores are toggled by the user at various times. Since the code
cleanups there seem to be an overall win, and toggling semaphores at
runtime is not a terribly useful thing to do, simply make the module
parameter read-only.

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The ring will emit too many if semaphores are disabled since we do not
add the correct number to num_dwords anymore.

This was introduced:
commit 52ed2325
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date:   Mon Dec 16 20:50:38 2013 -0800

    drm/i915: Don't emit mbox updates without semaphores

FWIW, the bug was fixed later in the series.

/me hangs head in shame.

Daniel: Also note that we should have merged the read-only semaphore
modparam before this patch.
Reported-by: NKenneth Graunke <kenneth@whitecape.org>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

While trying to find a random -EINVAL from a failing test, I noticed we
had a few hard to follow return values.

The first two hunks in this patch replace completely useless
initialization of ret. The last several hunks help to distinguish
between altering 'return ret' and 'return <ERROR>'
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On pre-PCH platforms ISR doesn't seem to be an actual ISR, at least as
far as display interrupts are concerned. Instead it sort of looks like
some ISR bits just directly reflect the corresponding bit from PIPESTAT.
The bit appears in the ISR only if the PIPESTAT interrupt is enabled. So
in that sense it sort of looks a bit like the south interrupt scheme on
PCH platforms. So it goes something a bit like this:
PIPESTAT.status & PIPESTAT.enable -> ISR -> IMR -> IIR -> IER -> actual
interrupt

In any case that means the intel_pipe_in_vblank_locked() doesn't actually
work for pre-PCH platforms. As a last resort, add a similar kludge as radeon
has that fixes things up if we got called from the vblank interrupt,
but the scanline counter value indicates that we're not quite there yet.
We know that the scanline counter increments at hsync but is otherwise
accurate, so we can limit the kludge to the line just prior to vblank
start, instead of the relative distance that radeon uses.

Reviewed-by: mario.kleiner.de@gmail.com
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

Preparation for moving the early vblank IRQ logic into
radeon_get_crtc_scanoutpos().

v2: Fix radeon_drv.c compile warning (Mario)

Reviewed-by: mario.kleiner.de@gmail.com
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

The scanline counter counts lines in the current field, not the entire
frame. But the crtc_ timings are the values for the entire frame. Divide
the vertical timings by 2 to make them match the scanline counter.

The rounding was carefully chosen to make it do the right thing wrt. the
observed scanline counter and ISR vblank bit behaviour.

Reviewed-by: mario.kleiner.de@gmail.com
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

Update the pixel/line/frame duration information when we switch to the
new pipe config. This will keep the timestamping constants in better
sync with the real hardware state.

Reviewed-by: mario.kleiner.de@gmail.com
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

drm core no longer uses crtc->hwmode, and neither does i915, so we can totally ignore it
in i915.

Reviewed-by: mario.kleiner.de@gmail.com
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

Rather than using crtc->hwmode, just pass the relevant mode to
drm_calc_vbltimestamp_from_scanoutpos(). This removes the last hwmode
usage from core drm.

Reviewed-by: mario.kleiner.de@gmail.com
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

We don't really use hwmode anymore in i915, so eliminating its use
from the core code seems prudent. Just pass the appropriate mode
to drm_calc_timestamping_constants().

Reviewed-by: mario.kleiner.de@gmail.com
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

We were apparently relying on the defaults on BDW, which resulted in no
hotplug or AUX interrupts.  So be sure to call the ibx_irq_preinstall to
enable all interrupts.

v2: use preinstall instead of redundant SDIER write

References: https://bugs.freedesktop.org/show_bug.cgi?id=72834
References: https://bugs.freedesktop.org/show_bug.cgi?id=72833Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Daniel thought that this was an opportune moment to include which pins
and bits ended up being stuck in the WARN.
Suggested-by: NDaniel Vetter <daniel@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Disabling the hotplug IRQ is a two-step process. First, inside the IRQ
handler we mark the rogue hotplug pin for disabling. Then later in the
hotplug worker, we actually disable the hotplug pin. So we should not
WARN about the rogue hotplug IRQ being sent until after we have
completed disabling the pin.

References: https://bugzilla.redhat.com/show_bug.cgi?id=1051170Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It seems that hardware that is broken enough to emit a hotplug IRQ even
though the pin is surposedly disable, will do so indefinitely.

Note: There's a good chance the underlying issue has been fixed with

commit 0ce99f74
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Jul 26 11:27:49 2013 +0200

    drm/i915: fix gen4 digital port hotplug definitions

References: https://bugzilla.redhat.com/show_bug.cgi?id=1051170
Link: https://bugzilla.redhat.com/attachment.cgi?id=847786Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
[danvet: Add note about the potential fix.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We specifically exclude original gen4 (i.e. i965g/gm), so update the
naming for consistency. Spotted while reviewing related code due to a
report from Jesse about byt needing again different values.

v2: g4x, not gm45 since this also applies to the desktop version.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It's an accident waiting to happen.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

INSTPM is a masked register so use the _MASKED_BIT_{ENABLE,DISABLE}
macros when enabling/disabling self-refresh on 915GM.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>