- 19 6月, 2008 1 次提交
-
-
由 Greg KH 提交于
add a new PCI ID and remove an old dodgy one, include the explaination in the commented code so nobody readds later. (davej also sent the pci id addition). Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 18 6月, 2008 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: appletouch - implement reset-resume logic Input: i8042 - retry failed CTR writes when resuming Input: i8042 - add Fujitsu-Siemens Amilo Pro V2030 to nomux table Input: pcspkr - remove negative dependency on snd-pcsp Manually fixed up trivial conflict in drivers/usb/core/quirks.c
-
由 Miklos Szeredi 提交于
Use max not min to enforce a lower limit on the max I/O size. This bug was introduced by "fuse: fix max i/o size calculation" (commit e5d9a0df). Thanks to Brian Wang for noticing. Reported-by: NBrian Wang <ywang221@hotmail.com> Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Acked-by: NSzabolcs Szakacsits <szaka@ntfs-3g.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
Added !vmlinux.lds.h to .gitignore because it would otherwise be ignored. Signed-off-by: NEduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Acked-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Most users by far do not care about the exact return value (they only really care about whether the copy succeeded in its entirety or not), but a few special core routines actually care deeply about exactly how many bytes were copied from user space. And the unrolled versions of the x86-64 user copy routines would sometimes report that it had copied more bytes than it actually had. Very few uses actually have partial copies to begin with, but to make this bug even harder to trigger, most x86 CPU's use the "rep string" instructions for normal user copies, and that version didn't have this issue. To make it even harder to hit, the one user of this that really cared about the return value (and used the uncached version of the copy that doesn't use the "rep string" instructions) was the generic write routine, which pre-populated its source, once more hiding the problem by avoiding the exception case that triggers the bug. In other words, very special thanks to Bron Gondwana who not only triggered this, but created a test-program to show it, and bisected the behavior down to commit 08291429 ("mm: fix pagecache write deadlocks") which changed the access pattern just enough that you can now trigger it with 'writev()' with multiple iovec's. That commit itself was not the cause of the bug, it just allowed all the stars to align just right that you could trigger the problem. [ Side note: this is just the minimal fix to make the copy routines (with __copy_from_user_inatomic_nocache as the particular version that was involved in showing this) have the right return values. We really should improve on the exceptional case further - to make the copy do a byte-accurate copy up to the exact page limit that causes it to fail. As it is, the callers have to do extra work to handle the limit case gracefully. ] Reported-by: NBron Gondwana <brong@fastmail.fm> Cc: Nick Piggin <npiggin@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> (which didn't have this problem), and since most users that do the carethis was very hard to trigger, but
-
- 17 6月, 2008 16 次提交
-
-
由 Oliver Neukum 提交于
On some boxes the touchpad needs to be reinitialized after resume to make it function again. This fixes bugzilla #10825. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Jiri Kosina 提交于
There are systems that fail in i8042_resume() with i8042: Can't write CTR to resume as i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR) fails even though the controller claimed itself to be ready before. One retry after failing write fixes the problems on the failing systems. Reported-by: NHelmut Schaa <hschaa@novell.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: ocfs2: Remove ->hangup() from stack glue operations. ocfs2: Move the call of ocfs2_hb_ctl into the stack glue. ocfs2: Move the hb_ctl_path sysctl into the stack glue.
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Fix CONFIG_IA64_SGI_UV build error [IA64] Update check_sal_cache_flush to use platform_send_ipi() [IA64] perfmon: fix async exit bug
-
由 Joel Becker 提交于
The ->hangup() call was only used to execute ocfs2_hb_ctl. Now that the generic stack glue code handles this, the underlying stack drivers don't need to know about it. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Joel Becker 提交于
Take o2hb_stop() out of the o2cb code and make it part of the generic stack glue as ocfs2_leave_group(). This also allows us to remove the ocfs2_get_hb_ctl_path() function - everything to do with hb_ctl is now part of stackglue.c. o2cb no longer needs a ->hangup() function. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Joel Becker 提交于
ocfs2 needs to call out to the hb_ctl program at unmount for all cluster stacks. The first step is to move the hb_ctl_path sysctl out of the o2cb code and into the generic stack glue. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (21 commits) [POWERPC] Turn on ATA_SFF so we get SATA_SVW back in defconfigs [POWERPC] Remove ppc32's export of console_drivers [POWERPC] Fix -Os kernel builds with newer gcc versions [POWERPC] Fix bootwrapper builds with newer gcc versions [POWERPC] Build fix for drivers/macintosh/mediabay.c [POWERPC] Fix warning in pseries/eeh_driver.c [POWERPC] Add missing of_node_put in drivers/macintosh/therm_adt746x.c [POWERPC] Add missing of_node_put in drivers/macintosh/smu.c [POWERPC] Add missing of_node_put in pseries/nvram.c [POWERPC] Fix return value check logic in debugfs virq_mapping setup [POWERPC] Fix rmb to order cacheable vs. noncacheable powerpc/spufs: fix missed stop-and-signal event powerpc/spufs: synchronize interaction between spu exception handling and time slicing powerpc/spufs: remove class_0_dsisr from spu exception handling powerpc/spufs: wait for stable spu status in spu_stopped() [POWERPC] bootwrapper: add simpleImage* to list of boot targets [POWERPC] 83xx: MPC837xRDB's VSC7385 ethernet switch isn't on the MDIO bus [POWERPC] Updated Freescale PPC defconfigs [POWERPC] 8610: Update defconfig for MPC8610 HPCD [POWERPC] 85xx: MPC8548CDS - Fix size of PCIe IO space ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: sound: oxygen: fix NULL pointer dereference when loading snd-oxygen
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Au1200: MMC resource size off by one [MIPS] TANBAC: Update defconfig [MIPS] Vr41xx: Initialize PCI io_map_base [MIPS] Malta: Always compile MTD platform device registration code. [MIPS] Malta: Fix build errors for 64-bit kernels [MIPS] Lasat: sysctl fixup [MIPS] Fix buggy use of kmap_coherent. [MIPS] Lasat: bring back from the dead [MIPS] vpe_id is required for VSMP and SMTC builds [MIPS] Export smp_call_function and smp_call_function_single. [MIPS] Bring the SWARM defconfig up to date [MIPS] Sibyte: Build RTC support as an object [MIPS] Fix the fix for divide by zero error in build_{clear,copy}_page [MIPS] Fix build for PNX platforms. [MIPS] Add RM200 with R5000 CPU to known ARC machines [MIPS] Better load address for big endian SNI RM [MIPS] SB1250: Initialize io_map_base [MIPS] Alchemy: Add au1500 reserved interrupt [MIPS] Export empty_zero_page for sake of the ext4 module.
-
由 David Woodhouse 提交于
This seems to have been removed accidentally in commit ed7b1889 ("Unexport asm/page.h"), but wasn't supposed to have been -- the original patch at http://lkml.org/lkml/2007/10/30/144 just moved it from $(header-y) to $(unifdef-y) Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Acked-by: NPeter Korsgaard <jacmet@sunsite.dk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Woodhouse 提交于
This file is only included where it makes sense now, so there's no need for the CONFIG_ARCH_SUPPORTS_AOUT conditional -- and that conditional is bad, because we want to export <linux/a.out.h> to userspace. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Acked-by: NPeter Korsgaard <jacmet@sunsite.dk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Woodhouse 提交于
In commit d20894a2 ("Remove a.out interpreter support in ELF loader"), Andi removed support for a.out interpreters from the ELF loader, which was only ever needed for the transition from a.out to ELF. This removes the last traces of that support, in particular the inclusion of <linux/a.out.h>. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Acked-by: NPeter Korsgaard <jacmet@sunsite.dk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Woodhouse 提交于
We only need it for the /sbin/loader hack for OSF/1 executables, and we don't want to include it otherwise. While we're at it, remove the redundant '&& CONFIG_ARCH_SUPPORTS_AOUT' in the ifdef around that code. It's already dependent on __alpha__, and CONFIG_ARCH_SUPPORTS_AOUT is hard-coded to 'y' there. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Acked-by: NPeter Korsgaard <jacmet@sunsite.dk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Kill linux/a.out.h inclusions in the MN10300 arch code. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jack Steiner 提交于
Fix build error in CONFIG_IA64_SGI_UV config. (GENERIC builds are ok). Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 16 6月, 2008 19 次提交
-
-
由 Sergei Shtylyov 提交于
Au12x0 MMC platform device strangely claims 0x41 bytes for its memory-mapped registers. Make it claim the whole 0x80000 instead according to the memory map given in the datasheets. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
These boards need cca setup on CMDLINE. Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Bogendoerfer 提交于
Fix 64-bit Malta by using CKSEG0ADDR and correct casts. Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Horsten 提交于
LASAT's sysctl interface was broken, it failed a check during boot because a single entry had a sysctl number and the rest were unnumbered. When I fixed it I noticed that the whole sysctl file needed a spring clean, it was using mutexes where it wasn't needed (it's only needed to protect during writes to the EEPROM), so I moved that stuff out and generally cleaned the whole thing up. So now, LASAT's sysctl/proc interface is working again. Signed-off-by: NThomas Horsten <thomas@horsten.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Assuming the call of kmap_coherent in local_r4k_flush_cache_page doesn't need fixing this was skipped in fcae549295bcae801ac48fc1c2030ab8cc487020. Turns out it needed the same change after all. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Horsten 提交于
After the common MIPS CPU interrupt controller (for irq0-7) was introduced the Lasat boards didn't get their interrupts right, so nothing worked. The old routines need to be offset by the new 8 hardware interrupts common to all MIPS CPU's. Signed-off-by: NThomas Horsten <thomas@horsten.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Chris Dearman 提交于
Signed-off-by: NChris Dearman <chris@mips.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Zenon Fortuna 提交于
Signed-off-by: NChris Dearman <chris@mips.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
The SWARM defconfig file has not been regenerated for over a year now. Here is a patch to bring the file up to date. Additionally some important and sometimes confusing changes happened meanwhile. Here is the list of notable corresponding updates to the configuration: 1. CPU_SB1_PASS_2_2 is now selected rather than CPU_SB1_PASS_1. The latter requires a non-standard -msb1-pass1-workarounds option to be supported by GCC and I am told is quite rare anyway. [Ralf: Afaik -msb1-pass1-workarounds is available only in Monta Vista's special Sibyte gcc 3.0 variant and gcc 3.0 is too old to build a modern kernel anyway.] 2. PHYLIB and BROADCOM_PHY are both built in and NETDEV_1000 enabled as required by SB1250_MAC. 3. USB and USB_OHCI_HCD are enabled as there is an OHCI chip onboard. 4. TMPFS is enabled, because I use it. ;-) Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Build the SWARM platform library is as an object rather than an archive so that files which only contain symbols used by initcalls and do not provide any symbols that would pull them from an archive still work. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Build error was caused by commit 35133692. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Bogendoerfer 提交于
RM200 with R5ks have a little bit different arcname. Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Bogendoerfer 提交于
Use better load address for big endian kernels to avoid clashes with PROM / SASH. Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Correctly initialize io_map_base for the SB1250 PCI controller as required for proper iomap support. Based on a proposal from Daniel Jacobowitz. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 bruno randolf 提交于
In the conversion done in the commits 95c4eb3ef4484ca85da5c98780d358cffd546b90 9d360ab4 [MIPS] Alchemy: Renumber interrupts so irq_cpu can work. one reserved interrupt on au1500 was missed. this broke the au1000 ethernet driver. Signed-off-by: NBruno Randolf <br1@einfach.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-