- 30 6月, 2017 17 次提交
-
-
由 Josh Poimboeuf 提交于
In preparation for the new 'objtool undwarf generate' command, which will rely on 'objtool check', move the checking code from builtin-check.c to check.c where it can be used by other commands. Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: NJiri Slaby <jslaby@suse.cz> Cc: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/294c5c695fd73c1a5000bbe5960a7c9bec4ee6b4.1498659915.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Need to access netdev->num_rx_queues behind an accessor in netvsc driver otherwise the build breaks with some configs, from Arnd Bergmann. 2) Add dummy xfrm_dev_event() so that build doesn't fail when CONFIG_XFRM_OFFLOAD is not set. From Hangbin Liu. 3) Don't OOPS when pfkey_msg2xfrm_state() signals an erros, from Dan Carpenter. 4) Fix MCDI command size for filter operations in sfc driver, from Martin Habets. 5) Fix UFO segmenting so that we don't calculate incorrect checksums, from Michal Kubecek. 6) When ipv6 datagram connects fail, reset destination address and port. From Wei Wang. 7) TCP disconnect must reset the cached receive DST, from WANG Cong. 8) Fix sign extension bug on 32-bit in dev_get_stats(), from Eric Dumazet. 9) fman driver has to depend on HAS_DMA, from Madalin Bucur. 10) Fix bpf pointer leak with xadd in verifier, from Daniel Borkmann. 11) Fix negative page counts with GFO, from Michal Kubecek. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits) sfc: fix attempt to translate invalid filter ID net: handle NAPI_GRO_FREE_STOLEN_HEAD case also in napi_frags_finish() bpf: prevent leaking pointer via xadd on unpriviledged arcnet: com20020-pci: add missing pdev setup in netdev structure arcnet: com20020-pci: fix dev_id calculation arcnet: com20020: remove needless base_addr assignment Trivial fix to spelling mistake in arc_printk message arcnet: change irq handler to lock irqsave rocker: move dereference before free mlxsw: spectrum_router: Fix NULL pointer dereference net: sched: Fix one possible panic when no destroy callback virtio-net: serialize tx routine during reset net: usb: asix88179_178a: Add support for the Belkin B2B128 fsl/fman: add dependency on HAS_DMA net: prevent sign extension in dev_get_stats() tcp: reset sk_rx_dst in tcp_disconnect() net: ipv6: reset daddr and dport in sk if connect() fails bnx2x: Don't log mc removal needlessly bnxt_en: Fix netpoll handling. bnxt_en: Add missing logic to handle TPA end error conditions. ...
-
由 Linus Torvalds 提交于
Merge tag 'for-4.12/dm-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - dm thinp fix for crash that will occur when metadata device failure races with discard passdown to the underlying data device. - dm raid fix to not access the superblock's >= 1.9.0 'sectors' member unconditionally. * tag 'for-4.12/dm-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm thin: do not queue freed thin mapping for next stage processing dm raid: fix oops on upgrading to extended superblock format
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: "Two fixes that should go into this release. One is an nvme regression fix from Keith, fixing a missing queue freeze if the controller is being reset. This causes the reset to hang. The other is a fix for a leak of the bio protection info, if smaller sized O_DIRECT is used. This fix should be more involved as we have other problematic paths in the kernel, but given as this isn't a regression in this series, we'll tackle those for 4.13" * 'for-linus' of git://git.kernel.dk/linux-block: block: provide bio_uninit() free freeing integrity/task associations nvme/pci: Fix stuck nvme reset
-
由 Edward Cree 提交于
When filter insertion fails with no rollback, we were trying to convert EFX_EF10_FILTER_ID_INVALID to an id to store in 'ids' (which is either vlan->uc or vlan->mc). This would WARN_ON_ONCE and then record a bogus filter ID of 0x1fff, neither of which is a good thing. Fixes: 0ccb998b ("sfc: fix filter_id misinterpretation in edge case") Signed-off-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Kubeček 提交于
Recently I started seeing warnings about pages with refcount -1. The problem was traced to packets being reused after their head was merged into a GRO packet by skb_gro_receive(). While bisecting the issue pointed to commit c21b48cc ("net: adjust skb->truesize in ___pskb_trim()") and I have never seen it on a kernel with it reverted, I believe the real problem appeared earlier when the option to merge head frag in GRO was implemented. Handling NAPI_GRO_FREE_STOLEN_HEAD state was only added to GRO_MERGED_FREE branch of napi_skb_finish() so that if the driver uses napi_gro_frags() and head is merged (which in my case happens after the skb_condense() call added by the commit mentioned above), the skb is reused including the head that has been merged. As a result, we release the page reference twice and eventually end up with negative page refcount. To fix the problem, handle NAPI_GRO_FREE_STOLEN_HEAD in napi_frags_finish() the same way it's done in napi_skb_finish(). Fixes: d7e8883c ("net: make GRO aware of skb->head_frag") Signed-off-by: NMichal Kubecek <mkubecek@suse.cz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
Leaking kernel addresses on unpriviledged is generally disallowed, for example, verifier rejects the following: 0: (b7) r0 = 0 1: (18) r2 = 0xffff897e82304400 3: (7b) *(u64 *)(r1 +48) = r2 R2 leaks addr into ctx Doing pointer arithmetic on them is also forbidden, so that they don't turn into unknown value and then get leaked out. However, there's xadd as a special case, where we don't check the src reg for being a pointer register, e.g. the following will pass: 0: (b7) r0 = 0 1: (7b) *(u64 *)(r1 +48) = r0 2: (18) r2 = 0xffff897e82304400 ; map 4: (db) lock *(u64 *)(r1 +48) += r2 5: (95) exit We could store the pointer into skb->cb, loose the type context, and then read it out from there again to leak it eventually out of a map value. Or more easily in a different variant, too: 0: (bf) r6 = r1 1: (7a) *(u64 *)(r10 -8) = 0 2: (bf) r2 = r10 3: (07) r2 += -8 4: (18) r1 = 0x0 6: (85) call bpf_map_lookup_elem#1 7: (15) if r0 == 0x0 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R6=ctx R10=fp 8: (b7) r3 = 0 9: (7b) *(u64 *)(r0 +0) = r3 10: (db) lock *(u64 *)(r0 +0) += r6 11: (b7) r0 = 0 12: (95) exit from 7 to 11: R0=inv,min_value=0,max_value=0 R6=ctx R10=fp 11: (b7) r0 = 0 12: (95) exit Prevent this by checking xadd src reg for pointer types. Also add a couple of test cases related to this. Fixes: 1be7f75d ("bpf: enable non-root eBPF programs") Fixes: 17a52670 ("bpf: verifier (add verifier core)") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NMartin KaFai Lau <kafai@fb.com> Acked-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Michael Grzeschik says: ==================== arcnet: Collection of latest fixes Here we sum up the recent fixes I collected on the way to use and stabilise the framework. Part of it is an possible deadlock that we prevent as well to fix the calculation of the dev_id that can be setup by an rotary encoder. Beside that we added an trivial spelling patch and fix some wrong and missing assignments that improves the code footprint. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Grzeschik 提交于
We add the pdev data to the pci devices netdev structure. This way the interface get consistent device names in the userspace (udev). Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Grzeschik 提交于
The dev_id was miscalculated. Only the two bits 4-5 are relevant for the MA1 card. PCIARC1 and PCIFB2 use the four bits 4-7 for id selection. Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Grzeschik 提交于
The assignment is superfluous. Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Grzeschik 提交于
This patch prevents the arcnet driver from the following deadlock. [ 41.273910] ====================================================== [ 41.280397] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] [ 41.287433] 4.4.0-00034-gc0ae784 #536 Not tainted [ 41.292366] ------------------------------------------------------ [ 41.298863] arcecho/233 [HC0[0]:SC0[2]:HE0:SE0] is trying to acquire: [ 41.305628] (&(&lp->lock)->rlock){+.+...}, at: [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet] [ 41.315199] [ 41.315199] and this task is already holding: [ 41.321324] (_xmit_ARCNET#2){+.-...}, at: [<c06b934c>] packet_direct_xmit+0xfc/0x1c8 [ 41.329593] which would create a new lock dependency: [ 41.334893] (_xmit_ARCNET#2){+.-...} -> (&(&lp->lock)->rlock){+.+...} [ 41.341801] [ 41.341801] but this new dependency connects a SOFTIRQ-irq-safe lock: [ 41.350108] (_xmit_ARCNET#2){+.-...} ... which became SOFTIRQ-irq-safe at: [ 41.357539] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.362677] [<c063ab8c>] dev_watchdog+0x5c/0x264 [ 41.367723] [<c0094edc>] call_timer_fn+0x6c/0xf4 [ 41.372759] [<c00950b8>] run_timer_softirq+0x154/0x210 [ 41.378340] [<c0036b30>] __do_softirq+0x144/0x298 [ 41.383469] [<c0036fb4>] irq_exit+0xcc/0x130 [ 41.388138] [<c0085c50>] __handle_domain_irq+0x60/0xb4 [ 41.393728] [<c0014578>] __irq_svc+0x58/0x78 [ 41.398402] [<c0010274>] arch_cpu_idle+0x24/0x3c [ 41.403443] [<c007127c>] cpu_startup_entry+0x1f8/0x25c [ 41.409029] [<c09adc90>] start_kernel+0x3c0/0x3cc [ 41.414170] [ 41.414170] to a SOFTIRQ-irq-unsafe lock: [ 41.419931] (&(&lp->lock)->rlock){+.+...} ... which became SOFTIRQ-irq-unsafe at: [ 41.427996] ... [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.433409] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.439646] [<c0089120>] handle_nested_irq+0x8c/0xec [ 41.445063] [<c03c1170>] regmap_irq_thread+0x190/0x314 [ 41.450661] [<c0087244>] irq_thread_fn+0x1c/0x34 [ 41.455700] [<c0087548>] irq_thread+0x13c/0x1dc [ 41.460649] [<c0050f10>] kthread+0xe4/0xf8 [ 41.465158] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.470207] [ 41.470207] other info that might help us debug this: [ 41.470207] [ 41.478627] Possible interrupt unsafe locking scenario: [ 41.478627] [ 41.485763] CPU0 CPU1 [ 41.490521] ---- ---- [ 41.495279] lock(&(&lp->lock)->rlock); [ 41.499414] local_irq_disable(); [ 41.505636] lock(_xmit_ARCNET#2); [ 41.511967] lock(&(&lp->lock)->rlock); [ 41.518741] <Interrupt> [ 41.521490] lock(_xmit_ARCNET#2); [ 41.525356] [ 41.525356] *** DEADLOCK *** [ 41.525356] [ 41.531587] 1 lock held by arcecho/233: [ 41.535617] #0: (_xmit_ARCNET#2){+.-...}, at: [<c06b934c>] packet_direct_xmit+0xfc/0x1c8 [ 41.544355] the dependencies between SOFTIRQ-irq-safe lock and the holding lock: [ 41.552362] -> (_xmit_ARCNET#2){+.-...} ops: 27 { [ 41.557357] HARDIRQ-ON-W at: [ 41.560664] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.567445] [<c063ba28>] dev_deactivate_many+0x114/0x304 [ 41.574866] [<c063bc3c>] dev_deactivate+0x24/0x38 [ 41.581646] [<c0630374>] linkwatch_do_dev+0x40/0x74 [ 41.588613] [<c06305d8>] __linkwatch_run_queue+0xec/0x140 [ 41.596120] [<c0630658>] linkwatch_event+0x2c/0x34 [ 41.602991] [<c004af30>] process_one_work+0x188/0x40c [ 41.610131] [<c004b200>] worker_thread+0x4c/0x480 [ 41.616912] [<c0050f10>] kthread+0xe4/0xf8 [ 41.623048] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.629735] IN-SOFTIRQ-W at: [ 41.633039] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.639820] [<c063ab8c>] dev_watchdog+0x5c/0x264 [ 41.646508] [<c0094edc>] call_timer_fn+0x6c/0xf4 [ 41.653190] [<c00950b8>] run_timer_softirq+0x154/0x210 [ 41.660425] [<c0036b30>] __do_softirq+0x144/0x298 [ 41.667201] [<c0036fb4>] irq_exit+0xcc/0x130 [ 41.673518] [<c0085c50>] __handle_domain_irq+0x60/0xb4 [ 41.680754] [<c0014578>] __irq_svc+0x58/0x78 [ 41.687077] [<c0010274>] arch_cpu_idle+0x24/0x3c [ 41.693769] [<c007127c>] cpu_startup_entry+0x1f8/0x25c [ 41.701006] [<c09adc90>] start_kernel+0x3c0/0x3cc [ 41.707791] INITIAL USE at: [ 41.711003] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.717696] [<c063ba28>] dev_deactivate_many+0x114/0x304 [ 41.725026] [<c063bc3c>] dev_deactivate+0x24/0x38 [ 41.731718] [<c0630374>] linkwatch_do_dev+0x40/0x74 [ 41.738593] [<c06305d8>] __linkwatch_run_queue+0xec/0x140 [ 41.746011] [<c0630658>] linkwatch_event+0x2c/0x34 [ 41.752789] [<c004af30>] process_one_work+0x188/0x40c [ 41.759847] [<c004b200>] worker_thread+0x4c/0x480 [ 41.766541] [<c0050f10>] kthread+0xe4/0xf8 [ 41.772596] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.779198] } [ 41.780945] ... key at: [<c124d620>] netdev_xmit_lock_key+0x38/0x1c8 [ 41.788192] ... acquired at: [ 41.791309] [<c007bed8>] lock_acquire+0x70/0x90 [ 41.796361] [<c06f9140>] _raw_spin_lock_irqsave+0x40/0x54 [ 41.802324] [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet] [ 41.808844] [<c06b9380>] packet_direct_xmit+0x130/0x1c8 [ 41.814622] [<c06bc7e4>] packet_sendmsg+0x3b8/0x680 [ 41.820034] [<c05fe8b0>] sock_sendmsg+0x14/0x24 [ 41.825091] [<c05ffd68>] SyS_sendto+0xb8/0xe0 [ 41.829956] [<c05ffda8>] SyS_send+0x18/0x20 [ 41.834638] [<c000f780>] ret_fast_syscall+0x0/0x1c [ 41.839954] [ 41.841514] the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock: [ 41.850302] -> (&(&lp->lock)->rlock){+.+...} ops: 5 { [ 41.855644] HARDIRQ-ON-W at: [ 41.858945] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.865726] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.873607] [<c0089120>] handle_nested_irq+0x8c/0xec [ 41.880666] [<c03c1170>] regmap_irq_thread+0x190/0x314 [ 41.887901] [<c0087244>] irq_thread_fn+0x1c/0x34 [ 41.894593] [<c0087548>] irq_thread+0x13c/0x1dc [ 41.901195] [<c0050f10>] kthread+0xe4/0xf8 [ 41.907338] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.914025] SOFTIRQ-ON-W at: [ 41.917328] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.924106] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.931981] [<c0089120>] handle_nested_irq+0x8c/0xec [ 41.939028] [<c03c1170>] regmap_irq_thread+0x190/0x314 [ 41.946264] [<c0087244>] irq_thread_fn+0x1c/0x34 [ 41.952954] [<c0087548>] irq_thread+0x13c/0x1dc [ 41.959548] [<c0050f10>] kthread+0xe4/0xf8 [ 41.965689] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.972379] INITIAL USE at: [ 41.975595] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.982283] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.990063] [<c0089120>] handle_nested_irq+0x8c/0xec [ 41.997027] [<c03c1170>] regmap_irq_thread+0x190/0x314 [ 42.004172] [<c0087244>] irq_thread_fn+0x1c/0x34 [ 42.010766] [<c0087548>] irq_thread+0x13c/0x1dc [ 42.017267] [<c0050f10>] kthread+0xe4/0xf8 [ 42.023314] [<c000f810>] ret_from_fork+0x14/0x24 [ 42.029903] } [ 42.031648] ... key at: [<bf0854cc>] __key.42091+0x0/0xfffff0f8 [arcnet] [ 42.039255] ... acquired at: [ 42.042372] [<c007bed8>] lock_acquire+0x70/0x90 [ 42.047413] [<c06f9140>] _raw_spin_lock_irqsave+0x40/0x54 [ 42.053364] [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet] [ 42.059872] [<c06b9380>] packet_direct_xmit+0x130/0x1c8 [ 42.065634] [<c06bc7e4>] packet_sendmsg+0x3b8/0x680 [ 42.071030] [<c05fe8b0>] sock_sendmsg+0x14/0x24 [ 42.076069] [<c05ffd68>] SyS_sendto+0xb8/0xe0 [ 42.080926] [<c05ffda8>] SyS_send+0x18/0x20 [ 42.085601] [<c000f780>] ret_fast_syscall+0x0/0x1c [ 42.090918] [ 42.092481] [ 42.092481] stack backtrace: [ 42.097065] CPU: 0 PID: 233 Comm: arcecho Not tainted 4.4.0-00034-gc0ae784 #536 [ 42.104751] Hardware name: Generic AM33XX (Flattened Device Tree) [ 42.111183] [<c0017ec8>] (unwind_backtrace) from [<c00139d0>] (show_stack+0x10/0x14) [ 42.119337] [<c00139d0>] (show_stack) from [<c02a82c4>] (dump_stack+0x8c/0x9c) [ 42.126937] [<c02a82c4>] (dump_stack) from [<c0078260>] (check_usage+0x4bc/0x63c) [ 42.134815] [<c0078260>] (check_usage) from [<c0078438>] (check_irq_usage+0x58/0xb0) [ 42.142964] [<c0078438>] (check_irq_usage) from [<c007aaa0>] (__lock_acquire+0x1524/0x20b0) [ 42.151740] [<c007aaa0>] (__lock_acquire) from [<c007bed8>] (lock_acquire+0x70/0x90) [ 42.159886] [<c007bed8>] (lock_acquire) from [<c06f9140>] (_raw_spin_lock_irqsave+0x40/0x54) [ 42.168768] [<c06f9140>] (_raw_spin_lock_irqsave) from [<bf083bc8>] (arcnet_send_packet+0x60/0x1c0 [arcnet]) [ 42.179115] [<bf083bc8>] (arcnet_send_packet [arcnet]) from [<c06b9380>] (packet_direct_xmit+0x130/0x1c8) [ 42.189182] [<c06b9380>] (packet_direct_xmit) from [<c06bc7e4>] (packet_sendmsg+0x3b8/0x680) [ 42.198059] [<c06bc7e4>] (packet_sendmsg) from [<c05fe8b0>] (sock_sendmsg+0x14/0x24) [ 42.206199] [<c05fe8b0>] (sock_sendmsg) from [<c05ffd68>] (SyS_sendto+0xb8/0xe0) [ 42.213978] [<c05ffd68>] (SyS_sendto) from [<c05ffda8>] (SyS_send+0x18/0x20) [ 42.221388] [<c05ffda8>] (SyS_send) from [<c000f780>] (ret_fast_syscall+0x0/0x1c) Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de> --- v1 -> v2: removed unneeded zero assignment of flags Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
My static checker complains that ofdpa_neigh_del() can sometimes free "found". It just makes sense to use it first before deleting it. Fixes: ecf244f7 ("rocker: fix maybe-uninitialized warning") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
In case a VLAN device is enslaved to a bridge we shouldn't create a router interface (RIF) for it when it's configured with an IP address. This is already handled by the driver for other types of netdevs, such as physical ports and LAG devices. If this IP address is then removed and the interface is subsequently unlinked from the bridge, a NULL pointer dereference can happen, as the original 802.1d FID was replaced with an rFID which was then deleted. To reproduce: $ ip link set dev enp3s0np9 up $ ip link add name enp3s0np9.111 link enp3s0np9 type vlan id 111 $ ip link set dev enp3s0np9.111 up $ ip link add name br0 type bridge $ ip link set dev br0 up $ ip link set enp3s0np9.111 master br0 $ ip address add dev enp3s0np9.111 192.168.0.1/24 $ ip address del dev enp3s0np9.111 192.168.0.1/24 $ ip link set dev enp3s0np9.111 nomaster Fixes: 99724c18 ("mlxsw: spectrum: Introduce support for router interfaces") Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Reported-by: NPetr Machata <petrm@mellanox.com> Tested-by: NPetr Machata <petrm@mellanox.com> Reviewed-by: NPetr Machata <petrm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gao Feng 提交于
When qdisc fail to init, qdisc_create would invoke the destroy callback to cleanup. But there is no check if the callback exists really. So it would cause the panic if there is no real destroy callback like the qdisc codel, fq, and so on. Take codel as an example following: When a malicious user constructs one invalid netlink msg, it would cause codel_init->codel_change->nla_parse_nested failed. Then kernel would invoke the destroy callback directly but qdisc codel doesn't define one. It causes one panic as a result. Now add one the check for destroy to avoid the possible panic. Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation") Signed-off-by: NGao Feng <gfree.wind@vip.163.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jason Wang 提交于
We don't hold any tx lock when trying to disable TX during reset, this would lead a use after free since ndo_start_xmit() tries to access the virtqueue which has already been freed. Fix this by using netif_tx_disable() before freeing the vqs, this could make sure no tx after vq freeing. Reported-by: NJean-Philippe Menil <jpmenil@gmail.com> Tested-by: NJean-Philippe Menil <jpmenil@gmail.com> Fixes commit f600b690 ("virtio_net: Add XDP support") Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: NJason Wang <jasowang@redhat.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Acked-by: NRobert McCabe <robert.mccabe@rockwellcollins.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 6月, 2017 5 次提交
-
-
由 Tobias Klauser 提交于
The only user of thread_saved_pc() in non-arch-specific code was removed in commit 8243d559 ("sched/core: Remove pointless printout in sched_show_task()"). Remove the implementations as well. Some architectures use thread_saved_pc() in their arch-specific code. Leave their thread_saved_pc() intact. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jens Axboe 提交于
Wen reports significant memory leaks with DIF and O_DIRECT: "With nvme devive + T10 enabled, On a system it has 256GB and started logging /proc/meminfo & /proc/slabinfo for every minute and in an hour it increased by 15968128 kB or ~15+GB.. Approximately 256 MB / minute leaking. /proc/meminfo | grep SUnreclaim... SUnreclaim: 6752128 kB SUnreclaim: 6874880 kB SUnreclaim: 7238080 kB .... SUnreclaim: 22307264 kB SUnreclaim: 22485888 kB SUnreclaim: 22720256 kB When testcases with T10 enabled call into __blkdev_direct_IO_simple, code doesn't free memory allocated by bio_integrity_alloc. The patch fixes the issue. HTX has been run with +60 hours without failure." Since __blkdev_direct_IO_simple() allocates the bio on the stack, it doesn't go through the regular bio free. This means that any ancillary data allocated with the bio through the stack is not freed. Hence, we can leak the integrity data associated with the bio, if the device is using DIF/DIX. Fix this by providing a bio_uninit() and export it, so that we can use it to free this data. Note that this is a minimal fix for this issue. Any current user of bio's that are allocated outside of bio_alloc_bioset() suffers from this issue, most notably some drivers. We will fix those in a more comprehensive patch for 4.13. This also means that the commit marked as being fixed by this isn't the real culprit, it's just the most obvious one out there. Fixes: 542ff7bf ("block: new direct I/O implementation") Reported-by: NWen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfixes from Trond Myklebust: "Bugfixes include: - stable fix for exclusive create if the server supports the umask attribute - trunking detection should handle ERESTARTSYS/EINTR - stable fix for a race in the LAYOUTGET function - stable fix to revert "nfs_rename() handle -ERESTARTSYS dentry left behind" - nfs4_callback_free_slot() cannot call nfs4_slot_tbl_drain_complete()" * tag 'nfs-for-4.12-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4.1: nfs4_callback_free_slot() cannot call nfs4_slot_tbl_drain_complete() Revert "NFS: nfs_rename() handle -ERESTARTSYS dentry left behind" NFSv4.1: Fix a race in nfs4_proc_layoutget NFS: Trunking detection should handle ERESTARTSYS/EINTR NFSv4.2: Don't send mode again in post-EXCLUSIVE4_1 SETATTR with umask
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "This is the final set of fixes for -rc8, just a few i915 and one vmwgfx ones. I'm off on holidays for a week, so if anything shows up for fixes I've asked Daniel or Sean Paul to herd it in the right direction" [ The additional etnaviv fixes were already herded towards me as seen in my previous pull - Linus ] * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/vmwgfx: Free hash table allocated by cmdbuf managed res mgr drm/i915: Disable EXEC_OBJECT_ASYNC when doing relocations drm/i915: Hold struct_mutex for per-file stats in debugfs/i915_gem_object drm/i915: Retire the VMA's fence tracker before unbinding
-
git://git.pengutronix.de/git/lst/linux由 Linus Torvalds 提交于
Pull drm/etnaviv fixes from Lucas Stach: "I realized I just missed the cut-off point for the final drm fixes pull, but I have 2 more etnaviv fixes that need to go into 4.12, as they fix fallout from the explicit sync work introduced in the last merge window" [ Pulling directly because Dave is on vacation. Noted by Daniel Vetter, and acked by Dave Airlie - Linus ] * 'etnaviv/fixes' of git://git.pengutronix.de/git/lst/linux: drm/etnaviv: Fix implicit/explicit sync sense inversion drm/etnaviv: fix submit flags getting overwritten by BO content
-
- 28 6月, 2017 13 次提交
-
-
由 Daniel Stone 提交于
We were reading the no-implicit sync flag the wrong way around, synchronizing too much for the explicit case, and not at all for the implicit case. Oops. Signed-off-by: NDaniel Stone <daniels@collabora.com> Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
-
由 Lucas Stach 提交于
The addition of the flags member to etnaviv_gem_submit structure didn't take into account that the last member of this structure is a variable length array. Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
-
由 Dave Airlie 提交于
Merge tag 'drm-intel-fixes-2017-06-27' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes Just a few minor fixes. Important one is the execbuf async fix (aka ANDROID_native_sync). There was another patch for a display coherency corner case on APL, but we've random-walked in that space too much, and the cherry-pick looked really invasive. * tag 'drm-intel-fixes-2017-06-27' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: Disable EXEC_OBJECT_ASYNC when doing relocations drm/i915: Hold struct_mutex for per-file stats in debugfs/i915_gem_object drm/i915: Retire the VMA's fence tracker before unbinding
-
git://people.freedesktop.org/~thomash/linux由 Dave Airlie 提交于
Single vmwgfx fix * 'vmwgfx-fixes-4.12' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Free hash table allocated by cmdbuf managed res mgr
-
由 Trond Myklebust 提交于
The current code works only for the case where we have exactly one slot, which is no longer true. nfs4_free_slot() will automatically declare the callback channel to be drained when all slots have been returned. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Benjamin Coddington 提交于
This reverts commit 920b4530 which could call d_move() without holding the directory's i_mutex, and reverts commit d4ea7e3c "NFS: Fix old dentry rehash after move", which was a follow-up fix. Signed-off-by: NBenjamin Coddington <bcodding@redhat.com> Fixes: 920b4530 ("NFS: nfs_rename() handle -ERESTARTSYS dentry left behind") Cc: stable@vger.kernel.org # v4.10+ Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
If the task calling layoutget is signalled, then it is possible for the calls to nfs4_sequence_free_slot() and nfs4_layoutget_prepare() to race, in which case we leak a slot. The fix is to move the call to nfs4_sequence_free_slot() into the nfs4_layoutget_release() so that it gets called at task teardown time. Fixes: 2e80dbe7 ("NFSv4.1: Close callback races for OPEN, LAYOUTGET...") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
Currently, it will return EIO in those cases. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Keith Busch 提交于
The controller state is set to resetting prior to disabling the controller, so this patch accounts for that state when deciding if it needs to freeze the queues. Without this, an 'nvme reset /dev/nvme0' blocks forever because the queues were never frozen. Fixes: 82b057ca ("nvme-pci: fix multiple ctrl removal scheduling") Signed-off-by: NKeith Busch <keith.busch@intel.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Andrew F. Davis 提交于
The Belkin B2B128 is a USB 3.0 Hub + Gigabit Ethernet Adapter, the Ethernet adapter uses the ASIX AX88179 USB 3.0 to Gigabit Ethernet chip supported by this driver, add the USB ID for the same. This patch is based on work by Geoffrey Tran <geoffrey.tran@gmail.com> who has indicated they would like this upstreamed by someone more familiar with the upstreaming process. Signed-off-by: NAndrew F. Davis <afd@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Madalin Bucur 提交于
A previous commit (5567e989) inserted a dependency on DMA API that requires HAS_DMA to be added in Kconfig. Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vallish Vaidyeshwara 提交于
process_prepared_discard_passdown_pt1() should cleanup dm_thin_new_mapping in cases of error. dm_pool_inc_data_range() can fail trying to get a block reference: metadata operation 'dm_pool_inc_data_range' failed: error = -61 When dm_pool_inc_data_range() fails, dm thin aborts current metadata transaction and marks pool as PM_READ_ONLY. Memory for thin mapping is released as well. However, current thin mapping will be queued onto next stage as part of queue_passdown_pt2() or passdown_endio(). This dangling thin mapping memory when processed and accessed in next stage will lead to device mapper crashing. Code flow without fix: -> process_prepared_discard_passdown_pt1(m) -> dm_thin_remove_range() -> discard passdown --> passdown_endio(m) queues m onto next stage -> dm_pool_inc_data_range() fails, frees memory m but does not remove it from next stage queue -> process_prepared_discard_passdown_pt2(m) -> processes freed memory m and crashes One such stack: Call Trace: [<ffffffffa037a46f>] dm_cell_release_no_holder+0x2f/0x70 [dm_bio_prison] [<ffffffffa039b6dc>] cell_defer_no_holder+0x3c/0x80 [dm_thin_pool] [<ffffffffa039b88b>] process_prepared_discard_passdown_pt2+0x4b/0x90 [dm_thin_pool] [<ffffffffa0399611>] process_prepared+0x81/0xa0 [dm_thin_pool] [<ffffffffa039e735>] do_worker+0xc5/0x820 [dm_thin_pool] [<ffffffff8152bf54>] ? __schedule+0x244/0x680 [<ffffffff81087e72>] ? pwq_activate_delayed_work+0x42/0xb0 [<ffffffff81089f53>] process_one_work+0x153/0x3f0 [<ffffffff8108a71b>] worker_thread+0x12b/0x4b0 [<ffffffff8108a5f0>] ? rescuer_thread+0x350/0x350 [<ffffffff8108fd6a>] kthread+0xca/0xe0 [<ffffffff8108fca0>] ? kthread_park+0x60/0x60 [<ffffffff81530b45>] ret_from_fork+0x25/0x30 The fix is to first take the block ref count for discarded block and then do a passdown discard of this block. If block ref count fails, then bail out aborting current metadata transaction, mark pool as PM_READ_ONLY and also free current thin mapping memory (existing error handling code) without queueing this thin mapping onto next stage of processing. If block ref count succeeds, then passdown discard of this block. Discard callback of passdown_endio() will queue this thin mapping onto next stage of processing. Code flow with fix: -> process_prepared_discard_passdown_pt1(m) -> dm_thin_remove_range() -> dm_pool_inc_data_range() --> if fails, free memory m and bail out -> discard passdown --> passdown_endio(m) queues m onto next stage Cc: stable <stable@vger.kernel.org> # v4.9+ Reviewed-by: NEduardo Valentin <eduval@amazon.com> Reviewed-by: NCristian Gafton <gafton@amazon.com> Reviewed-by: NAnchal Agarwal <anchalag@amazon.com> Signed-off-by: NVallish Vaidyeshwara <vallish@amazon.com> Reviewed-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
由 Eric Dumazet 提交于
Similar to the fix provided by Dominik Heidler in commit 9b3dc0a1 ("l2tp: cast l2tp traffic counter to unsigned") we need to take care of 32bit kernels in dev_get_stats(). When using atomic_long_read(), we add a 'long' to u64 and might misinterpret high order bit, unless we cast to unsigned. Fixes: caf586e5 ("net: add a core netdev->rx_dropped counter") Fixes: 015f0688 ("net: net: add a core netdev->tx_dropped counter") Fixes: 6e7333d3 ("net: add rx_nohandler stat counter") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Jarod Wilson <jarod@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 6月, 2017 3 次提交
-
-
git://git.armlinux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "Three more fixes: - Fix the previous fix merged in the last pull for the Thumb2 decompressor. - A fix from Vladimir to correctly identify the V7M cache type. - The optimised 3G vmsplit case does not work with LPAE, so don't allow this to be selected for LPAE configurations" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8682/1: V7M: Set cacheid iff DminLine or IminLine is nonzero ARM: 8681/1: make VMSPLIT_3G_OPT depends on !ARM_LPAE ARM: 8680/1: boot/compressed: fix inappropriate Thumb2 mnemonic for __nop
-
git://linux-c6x.org/git/projects/linux-c6x-upstreaming由 Linus Torvalds 提交于
Pull c6x fixlet from Mark Salter: "Update maintainer email" * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: MAINTAINERS: update email address for C6x maintainer
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 bugfix from Martin Schwidefsky: "One last s390 patch for 4.12 Revert the re-IPL semantics back to the v4.7 state. It turned out that the memory layout may change due to memory hotplug if load-normal is used" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/ipl: revert Load Normal semantics for LPAR CCW-type re-IPL
-
- 26 6月, 2017 2 次提交
-
-
由 Deepak Rawat 提交于
The hash table created during vmw_cmdbuf_res_man_create was never freed. This causes memory leak in context creation. Added the corresponding drm_ht_remove in vmw_cmdbuf_res_man_destroy. Tested for memory leak by running piglit overnight and kernel memory is not inflated which earlier was. Cc: <stable@vger.kernel.org> Signed-off-by: NDeepak Rawat <drawat@vmware.com> Reviewed-by: NSinclair Yeh <syeh@vmware.com> Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
-
由 Chris Wilson 提交于
If we write a relocation into the buffer, we require our own implicit synchronisation added after the start of the execbuf, outside of the user's control. As we may end up clflushing, or doing the patch itself on the GPU, asynchronously we need to look at the implicit serialisation on obj->resv and hence need to disable EXEC_OBJECT_ASYNC for this object. If the user does trigger a stall for relocations, we make sure the stall is complete enough so that the batch is not submitted before we complete those relocations. Fixes: 77ae9957 ("drm/i915: Enable userspace to opt-out of implicit fencing") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit 071750e5) [danvet: Resolve conflicts, resolution reviewed by Tvrtko on irc.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-