Add a set of APIs to perf_buffer manage to allow applications to integrate
perf buffer polling into existing epoll-based infrastructure. One example is
applications using libevent already and wanting to plug perf_buffer polling,
instead of relying on perf_buffer__poll() and waste an extra thread to do it.
But perf_buffer is still extremely useful to set up and consume perf buffer
rings even for such use cases.

So to accomodate such new use cases, add three new APIs:
  - perf_buffer__buffer_cnt() returns number of per-CPU buffers maintained by
    given instance of perf_buffer manager;
  - perf_buffer__buffer_fd() returns FD of perf_event corresponding to
    a specified per-CPU buffer; this FD is then polled independently;
  - perf_buffer__consume_buffer() consumes data from single per-CPU buffer,
    identified by its slot index.

To support a simpler, but less efficient, way to integrate perf_buffer into
external polling logic, also expose underlying epoll FD through
perf_buffer__epoll_fd() API. It will need to be followed by
perf_buffer__poll(), wasting extra syscall, or perf_buffer__consume(), wasting
CPU to iterate buffers with no data. But could be simpler and more convenient
for some cases.

These APIs allow for great flexiblity, but do not sacrifice general usability
of perf_buffer.

Also exercise and check new APIs in perf_buffer selftest.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Reviewed-by: NAlan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20200821165927.849538-1-andriin@fb.com

GCC compilers older than version 5 don't support __builtin_mul_overflow yet.
Given GCC 4.9 is the minimal supported compiler for building kernel and the
fact that libbpf is a dependency of resolve_btfids, which is dependency of
CONFIG_DEBUG_INFO_BTF=y, this needs to be handled. This patch fixes the issue
by falling back to slower detection of integer overflow in such cases.

Fixes: 029258d7 ("libbpf: Remove any use of reallocarray() in libbpf")
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NYonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200820061411.1755905-2-andriin@fb.com

BPF_CALL | BPF_JMP32 is explicitly not allowed by verifier for BPF helper
calls, so don't detect it as a valid call. Also drop the check on func_id
pointer, as it's currently always non-null.

Fixes: 109cea5a ("libbpf: Sanitize BPF program code for bpf_probe_read_{kernel, user}[_str]")
Reported-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NYonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200820061411.1755905-1-andriin@fb.com

Add kernel module with user mode driver that populates bpffs with
BPF iterators.

$ mount bpffs /my/bpffs/ -t bpf
$ ls -la /my/bpffs/
total 4
drwxrwxrwt  2 root root    0 Jul  2 00:27 .
drwxr-xr-x 19 root root 4096 Jul  2 00:09 ..
-rw-------  1 root root    0 Jul  2 00:27 maps.debug
-rw-------  1 root root    0 Jul  2 00:27 progs.debug

The user mode driver will load BPF Type Formats, create BPF maps, populate BPF
maps, load two BPF programs, attach them to BPF iterators, and finally send two
bpf_link IDs back to the kernel.
The kernel will pin two bpf_links into newly mounted bpffs instance under
names "progs.debug" and "maps.debug". These two files become human readable.

$ cat /my/bpffs/progs.debug
  id name            attached
  11 dump_bpf_map    bpf_iter_bpf_map
  12 dump_bpf_prog   bpf_iter_bpf_prog
  27 test_pkt_access
  32 test_main       test_pkt_access test_pkt_access
  33 test_subprog1   test_pkt_access_subprog1 test_pkt_access
  34 test_subprog2   test_pkt_access_subprog2 test_pkt_access
  35 test_subprog3   test_pkt_access_subprog3 test_pkt_access
  36 new_get_skb_len get_skb_len test_pkt_access
  37 new_get_skb_ifindex get_skb_ifindex test_pkt_access
  38 new_get_constant get_constant test_pkt_access

The BPF program dump_bpf_prog() in iterators.bpf.c is printing this data about
all BPF programs currently loaded in the system. This information is unstable
and will change from kernel to kernel as ".debug" suffix conveys.
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200819042759.51280-4-alexei.starovoitov@gmail.com

Simplify the return expression.
Signed-off-by: NXu Wang <vulab@iscas.ac.cn>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NYonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200819025324.14680-1-vulab@iscas.ac.cn

Implement two relocations of a new enumerator value-based CO-RE relocation
kind: ENUMVAL_EXISTS and ENUMVAL_VALUE.

First, ENUMVAL_EXISTS, allows to detect the presence of a named enumerator
value in the target (kernel) BTF. This is useful to do BPF helper/map/program
type support detection from BPF program side. bpf_core_enum_value_exists()
macro helper is provided to simplify built-in usage.

Second, ENUMVAL_VALUE, allows to capture enumerator integer value and relocate
it according to the target BTF, if it changes. This is useful to have
a guarantee against intentional or accidental re-ordering/re-numbering of some
of the internal (non-UAPI) enumerations, where kernel developers don't care
about UAPI backwards compatiblity concerns. bpf_core_enum_value() allows to
capture this succinctly and use correct enum values in code.

LLVM uses ldimm64 instruction to capture enumerator value-based relocations,
so add support for ldimm64 instruction patching as well.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NYonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200819194519.3375898-5-andriin@fb.com

Implement support for TYPE_EXISTS/TYPE_SIZE/TYPE_ID_LOCAL/TYPE_ID_REMOTE
relocations. These are examples of type-based relocations, as opposed to
field-based relocations supported already. The difference is that they are
calculating relocation values based on the type itself, not a field within
a struct/union.

Type-based relos have slightly different semantics when matching local types
to kernel target types, see comments in bpf_core_types_are_compat() for
details. Their behavior on failure to find target type in kernel BTF also
differs. Instead of "poisoning" relocatable instruction and failing load
subsequently in kernel, they return 0 (which is rarely a valid return result,
so user BPF code can use that to detect success/failure of the relocation and
deal with it without extra "guarding" relocations). Also, it's always possible
to check existence of the type in target kernel with TYPE_EXISTS relocation,
similarly to a field-based FIELD_EXISTS.

TYPE_ID_LOCAL relocation is a bit special in that it always succeeds (barring
any libbpf/Clang bugs) and resolved to BTF ID using **local** BTF info of BPF
program itself. Tests in subsequent patches demonstrate the usage and
semantics of new relocations.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NYonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200819194519.3375898-2-andriin@fb.com

It's trivial to handle missing ELF_C_MMAP_READ support in libelf the way that
objtool has solved it in
("774bec3f objtool: Add fallback from ELF_C_READ_MMAP to ELF_C_READ").

So instead of having an entire feature detector for that, just do what objtool
does for perf and libbpf. And keep their Makefiles a bit simpler.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200819013607.3607269-5-andriin@fb.com

Most of libbpf source files already include libbpf_internal.h, so it's a good
place to centralize identifier poisoning. So move kernel integer type
poisoning there. And also add reallocarray to a poison list to prevent
accidental use of it. libbpf_reallocarray() should be used universally
instead.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200819013607.3607269-4-andriin@fb.com

Most netlink-related functions were unique to bpftool usage, so I moved them
into net.c. Few functions are still used by both bpftool and libbpf itself
internally, so I've copy-pasted them (libbpf_nl_get_link,
libbpf_netlink_open). It's a bit of duplication of code, but better separation
of libbpf as a library with public API and bpftool, relying on unexposed
functions in libbpf.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200819013607.3607269-3-andriin@fb.com

Re-implement glibc's reallocarray() for libbpf internal-only use.
reallocarray(), unfortunately, is not available in all versions of glibc, so
requires extra feature detection and using reallocarray() stub from
<tools/libc_compat.h> and COMPAT_NEED_REALLOCARRAY. All this complicates build
of libbpf unnecessarily and is just a maintenance burden. Instead, it's
trivial to implement libbpf-specific internal version and use it throughout
libbpf.

Which is what this patch does, along with converting some realloc() uses that
should really have been reallocarray() in the first place.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200819013607.3607269-2-andriin@fb.com

Split the instruction patching logic into relocation value calculation and
application of relocation to instruction. Using this, evaluate relocation
against each matching candidate and validate that all candidates agree on
relocated value. If not, report ambiguity and fail load.

This logic is necessary to avoid dangerous (however unlikely) accidental match
against two incompatible candidate types. Without this change, libbpf will
pick a random type as *the* candidate and apply potentially invalid
relocation.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818223921.2911963-4-andriin@fb.com

Add logging of local/target type kind (struct/union/typedef/etc). Preserve
unresolved root type ID (for cases of typedef). Improve the format of CO-RE
reloc spec output format to contain only relevant and succinct info.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818223921.2911963-3-andriin@fb.com

Instead of printing out integer value of BTF kind, print out a string
representation of a kind.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818223921.2911963-2-andriin@fb.com

Detect whether a kernel supports any BTF at all, and if not, don't even
attempt loading BTF to avoid unnecessary log messages like:

  libbpf: Error loading BTF: Invalid argument(22)
  libbpf: Error loading .BTF into kernel: -22. BTF is optional, ignoring.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818213356.2629020-8-andriin@fb.com

Now that libbpf can automatically fallback to bpf_probe_read() on old kernels
not yet supporting bpf_probe_read_kernel(), switch libbpf BPF-side helper
macros to use appropriate BPF helper for reading kernel data.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20200818213356.2629020-7-andriin@fb.com

Add BPF program code sanitization pass, replacing calls to BPF
bpf_probe_read_{kernel,user}[_str]() helpers with bpf_probe_read[_str](), if
libbpf detects that kernel doesn't support new variants.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818213356.2629020-5-andriin@fb.com

Factor out common piece of logic that detects support for a feature based on
successfully created FD. Also take care of closing FD, if it was created.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818213356.2629020-4-andriin@fb.com

Turn libbpf's kernel feature probing into lazily-performed checks. This allows
to skip performing unnecessary feature checks, if a given BPF application
doesn't rely on a particular kernel feature. As we grow number of feature
probes, libbpf might perform less unnecessary syscalls and scale better with
number of feature probes long-term.

By decoupling feature checks from bpf_object, it's also possible to perform
feature probing from libbpf static helpers and low-level APIs, if necessary.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818213356.2629020-3-andriin@fb.com

That compilation warning is more annoying, than helpful.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818213356.2629020-2-andriin@fb.com

Replace a comma between expression statements by a semicolon.
Signed-off-by: NXu Wang <vulab@iscas.ac.cn>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NYonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200818071611.21923-1-vulab@iscas.ac.cn

BPF object files are always targeting 64-bit BPF target architecture, so
enforce that at BTF level as well.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-7-andriin@fb.com

With libbpf and BTF it is pretty common to have libbpf built for one
architecture, while BTF information was generated for a different architecture
(typically, but not always, BPF). In such case, the size of a pointer might
differ betweem architectures. libbpf previously was always making an
assumption that pointer size for BTF is the same as native architecture
pointer size, but that breaks for cases where libbpf is built as 32-bit
library, while BTF is for 64-bit architecture.

To solve this, add heuristic to determine pointer size by searching for `long`
or `unsigned long` integer type and using its size as a pointer size. Also,
allow to override the pointer size with a new API btf__set_pointer_size(), for
cases where application knows which pointer size should be used. User
application can check what libbpf "guessed" by looking at the result of
btf__pointer_size(). If it's not 0, then libbpf successfully determined a
pointer size, otherwise native arch pointer size will be used.

For cases where BTF is parsed from ELF file, use ELF's class (32-bit or
64-bit) to determine pointer size.

Fixes: 8a138aed ("bpf: btf: Add BTF support to libbpf")
Fixes: 351131b5 ("libbpf: add btf_dump API for BTF-to-C conversion")
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-5-andriin@fb.com

Libbpf built in 32-bit mode should be careful about not conflating 64-bit BPF
pointers in BPF ELF file and host architecture pointers. This patch fixes
issue of incorrect initializating of map-in-map inner map slots due to such
difference.

Fixes: 646f02ff ("libbpf: Add BTF-defined map-in-map support")
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-4-andriin@fb.com

Turns out there were a few more instances where libbpf didn't save the
errno before writing an error message, causing errno to be overridden by
the printf() return and the error disappearing if logging is enabled.
Signed-off-by: NToke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200813142905.160381-1-toke@redhat.com

Fix various typos and inconsistent capitalization of CPU in the libperf
man pages.
Signed-off-by: NRob Herring <robh@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200807193241.3904545-1-robh@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When building Arm NEON (SIMD) code from lib/raid6/neon.uc, GCC emits
DWARF information using a base type "__Poly8_t", which is internal to
GCC and not recognized by Clang. This causes build failures when
building with Clang a vmlinux.h generated from an arm64 kernel that was
built with GCC.

	vmlinux.h:47284:9: error: unknown type name '__Poly8_t'
	typedef __Poly8_t poly8x16_t[16];
	        ^~~~~~~~~

The polyX_t types are defined as unsigned integers in the "Arm C
Language Extension" document (101028_Q220_00_en). Emit typedefs based on
standard integer types for the GCC internal types, similar to those
emitted by Clang.

Including linux/kernel.h to use ARRAY_SIZE() incidentally redefined
max(), causing a build bug due to different types, hence the seemingly
unrelated change.
Reported-by: NJakov Petrina <jakov.petrina@sartura.hr>
Signed-off-by: NJean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200812143909.3293280-1-jean-philippe@linaro.org

Commit 5fbc2208 ("tools/libpf: Add offsetof/container_of macro
in bpf_helpers.h") added a macro offsetof() to get the offset of a
structure member:

   #define offsetof(TYPE, MEMBER)  ((size_t)&((TYPE *)0)->MEMBER)

In certain use cases, size_t type may not be available so
Commit da7a3506 ("libbpf bpf_helpers: Use __builtin_offsetof
for offsetof") changed to use __builtin_offsetof which removed
the dependency on type size_t, which I suggested.

But using __builtin_offsetof will prevent CO-RE relocation
generation in case that, e.g., TYPE is annotated with "preserve_access_info"
where a relocation is desirable in case the member offset is changed
in a different kernel version. So this patch reverted back to
the original macro but using "unsigned long" instead of "site_t".

Fixes: da7a3506 ("libbpf bpf_helpers: Use __builtin_offsetof for offsetof")
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Acked-by: NIan Rogers <irogers@google.com>
Link: https://lore.kernel.org/bpf/20200811030852.3396929-1-yhs@fb.com

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Signed-off-by: NAlexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200726120752.16768-1-grandmaster@al2klimov.deSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Recently, from commit 94a1fedd ("libbpf: Add btf__parse_raw() and
generic btf__parse() APIs"), new API has been added to libbpf that
allows to parse BTF from raw data file (btf__parse_raw()).

The commit derives build failure of samples/bpf due to improper access
of uninitialized pointer at btf_parse_raw().

    btf.c: In function btf__parse_raw:
    btf.c:625:28: error: btf may be used uninitialized in this function
      625 |  return err ? ERR_PTR(err) : btf;
          |         ~~~~~~~~~~~~~~~~~~~^~~~~

This commit fixes the build failure of samples/bpf by adding code of
initializing btf pointer as NULL.

Fixes: 94a1fedd ("libbpf: Add btf__parse_raw() and generic btf__parse() APIs")
Signed-off-by: NDaniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200805223359.32109-1-danieltimlee@gmail.com

Previous commit adjusted kernel uapi for map
element bpf iterator. This patch adjusted libbpf API
due to uapi change. bpftool and bpf_iter selftests
are also changed accordingly.
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200805055058.1457623-1-yhs@fb.com

Free allocated resources and return -1 in case strdup() fails in
tep_add_plugin_path() API.

Link: https://lore.kernel.org/r/CAM9d7chfvJwodpVrHGc5E2J80peRojmYV_fD8x3cpn9HFRUw2g@mail.gmail.com
Link: https://lore.kernel.org/linux-trace-devel/20200714103027.2477584-9-tz.stoyanov@gmail.com
Link: https://lore.kernel.org/linux-trace-devel/20200716092014.2613403-9-tz.stoyanov@gmail.comSuggested-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NTzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200722011755.720803193@goodmis.orgSigned-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Changed the description of tep_add_plugin_path() API to reflect the
logic of the function. The suffix of plugin files is not hardcoded
to ".so", it depends on the custom plugin loader callback.

Link: https://lore.kernel.org/CAM9d7cgMgqFDvKhs6xwdBSMsaG=3ZG0RtxwgQDCTLGkML1MY4Q@mail.gmail.com
Link: https://lore.kernel.org/linux-trace-devel/20200714103027.2477584-8-tz.stoyanov@gmail.com
Link: https://lore.kernel.org/linux-trace-devel/20200716092014.2613403-8-tz.stoyanov@gmail.comSuggested-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NTzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200722011755.581468845@goodmis.orgSigned-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

PRINT_FMT_STING -> PRINT_FMT_STRING

Link: https://lore.kernel.org/r/CAM9d7cj1LJ=QO8QxhBo_oDM9APpAswX4BbTwge0JhZ3Y4-Bv9w@mail.gmail.com
Link: https://lore.kernel.org/linux-trace-devel/20200714103027.2477584-7-tz.stoyanov@gmail.com
Link: https://lore.kernel.org/linux-trace-devel/20200716092014.2613403-7-tz.stoyanov@gmail.comSuggested-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NTzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200722011755.442308322@goodmis.orgSigned-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fixed the "break" indentation in a switch() inside
parse_ip4_print_args() static function.

Link: https://lore.kernel.org/r/CAM9d7cjboXGg+iMOA4BQo=E01iLGcJNB1MyPJ4doPP1XeGVJRA@mail.gmail.com
Link: https://lore.kernel.org/linux-trace-devel/20200714103027.2477584-6-tz.stoyanov@gmail.com
Link: https://lore.kernel.org/linux-trace-devel/20200716092014.2613403-6-tz.stoyanov@gmail.comSuggested-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NTzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200722011755.310486074@goodmis.orgSigned-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In case of memory error, ensure all allocated resources are freed.
Do not append broken option in trace_plugin_options list.

Link: https://lore.kernel.org/r/CAM9d7cizjF+fbK7YzmsBDgrx__4YAOsmEq67D3sWET8FF+YdFA@mail.gmail.com
Link: https://lore.kernel.org/linux-trace-devel/20200714103027.2477584-5-tz.stoyanov@gmail.com
Link: https://lore.kernel.org/linux-trace-devel/20200716092014.2613403-5-tz.stoyanov@gmail.comSuggested-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NTzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200722011755.158091410@goodmis.orgSigned-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

A typo "optiona" -> "optional" is fixed in description of
tep_plugin_add_option() API.

Link: https://lore.kernel.org/r/CAM9d7cizjF+fbK7YzmsBDgrx__4YAOsmEq67D3sWET8FF+YdFA@mail.gmail.com
Link: https://lore.kernel.org/linux-trace-devel/20200714103027.2477584-4-tz.stoyanov@gmail.com
Link: https://lore.kernel.org/linux-trace-devel/20200716092014.2613403-4-tz.stoyanov@gmail.comSuggested-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NTzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200722011755.014613924@goodmis.orgSigned-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Modified internal function parse_option_name() to return error and
handle that error in function callers in case strdup() fails.

Link: https://lore.kernel.org/r/CAM9d7cizjF+fbK7YzmsBDgrx__4YAOsmEq67D3sWET8FF+YdFA@mail.gmail.com
Link: https://lore.kernel.org/linux-trace-devel/20200714103027.2477584-3-tz.stoyanov@gmail.com
Link: https://lore.kernel.org/linux-trace-devel/20200716092014.2613403-3-tz.stoyanov@gmail.comSuggested-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NTzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200722011754.869289038@goodmis.orgSigned-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add description of tep_load_plugins_hook() traceevent API. Updated
library man pages with description of the tep_load_plugins_hook() API.

Link: https://lore.kernel.org/r/CAM9d7cgLBWCrEHwz+Lhv5x5EXGcNWB0QQoeGh3OKh2JfR=dV9Q@mail.gmail.com
Link: https://lore.kernel.org/linux-trace-devel/20200714103027.2477584-2-tz.stoyanov@gmail.com
Link: https://lore.kernel.org/linux-trace-devel/20200716092014.2613403-2-tz.stoyanov@gmail.comSuggested-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NTzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200722011754.720060785@goodmis.orgSigned-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add public APIs to parse BTF from raw data file (e.g.,
/sys/kernel/btf/vmlinux), as well as generic btf__parse(), which will try to
determine correct format, currently either raw or ELF.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200802013219.864880-2-andriin@fb.com