On init, ieee80211_if_add() dumps the interface. Since that now includes a
dump of the TXQ state, we need to initialise that before the dump happens.
So move up the TXQ initialisation to to before the call to
ieee80211_if_add().

Fixes: 52539ca8 ("cfg80211: Expose TXQ stats and parameters to userspace")
Reported-by: NNiklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: NToke Høiland-Jørgensen <toke@toke.dk>
Tested-by: NNiklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>

We didn't free the workqueue on any errors, nor did we
correctly check for rhashtable allocation errors, nor
did we free the hashtable on error.
Reported-by: NColin King <colin.king@canonical.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>

Most of the implementations behind cfg80211_get_station will not initialize
sinfo to zero before manipulating it. For example, the member "filled",
which indicates the filled in parts of this struct, is often only modified
by enabling certain bits in the bitfield while keeping the remaining bits
in their original state. A caller without a preinitialized sinfo.filled can
then no longer decide which parts of sinfo were filled in by
cfg80211_get_station (or actually the underlying implementations).

cfg80211_get_station must therefore take care that sinfo is initialized to
zero. Otherwise, the caller may tries to read information which was not
filled in and which must therefore also be considered uninitialized. In
batadv_v_elp_get_throughput's case, an invalid "random" expected throughput
may be stored for this neighbor and thus the B.A.T.M.A.N V algorithm may
switch to non-optimal neighbors for certain destinations.

Fixes: 7406353d ("cfg80211: implement cfg80211_get_station cfg80211 API")
Reported-by: NThomas Lauer <holminateur@gmail.com>
Reported-by: NMarcel Schmidt <ff.z-casparistrasse@mailbox.org>
Cc: b.a.t.m.a.n@lists.open-mesh.org
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>

There is a bunch of tags marking constants with &, which means struct
or enum name.  Replace them with %, which is the correct tag for
constants.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>

Guillaume Nault says:

====================
l2tp: pppol2tp_connect() fixes

This series fixes a few remaining issues with pppol2tp_connect().

It doesn't try to prevent invalid configurations that have no effect on
kernel's reliability. That would be work for a future patch set.

Patch 2 is the most important as it avoids an invalid pointer
dereference crashing the kernel. It depends on patch 1 for correctly
identifying L2TP session types.

Patches 3 and 4 avoid creating stale tunnels and sessions.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pppol2tp_connect() may create a tunnel or a session. Remove them in
case of error.

Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If 'fd' is negative, l2tp_tunnel_create() creates a tunnel socket using
the configuration passed in 'tcfg'. Currently, pppol2tp_connect() sets
the relevant fields to zero, tricking l2tp_tunnel_create() into setting
up an unusable kernel socket.

We can't set 'tcfg' with the required fields because there's no way to
get them from the current connect() parameters. So let's restrict
kernel sockets creation to the netlink API, which is the original use
case.

Fixes: 789a4a2c ("l2tp: Add support for static unmanaged L2TPv3 tunnels")
Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

l2tp_session_priv() returns a struct pppol2tp_session pointer only for
PPPoL2TP sessions. In particular, if the session is an L2TP_PWTYPE_ETH
pseudo-wire, l2tp_session_priv() returns a pointer to an l2tp_eth_sess
structure, which is much smaller than struct pppol2tp_session. This
leads to invalid memory dereference when trying to lock ps->sk_lock.

Fixes: d9e31d17 ("l2tp: Add L2TP ethernet pseudowire support")
Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Define cfg.pw_type so that the new session is created with its .pwtype
field properly set (L2TP_PWTYPE_PPP).

Not setting the pseudo-wire type had several annoying effects:

  * Invalid value returned in the L2TP_ATTR_PW_TYPE attribute when
    dumping sessions with the netlink API.

  * Impossibility to delete the session using the netlink API (because
    l2tp_nl_cmd_session_delete() gets the deletion callback function
    from an array indexed by the session's pseudo-wire type).

Also, there are several cases where we should check a session's
pseudo-wire type. For example, pppol2tp_connect() should refuse to
connect a session that is not PPPoL2TP, but that requires the session's
.pwtype field to be properly set.

Fixes: f7faffa3 ("l2tp: Add L2TPv3 protocol support")
Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Radhey Shyam Pandey says:

====================
emaclite bug fixes and code cleanup

This patch series fixes bug in emaclite remove and mdio_setup routines.
It does minor code cleanup.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Errors are already reported in xemaclite_mdio_setup so avoid
reporting it again.
Signed-off-by: NRadhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove unused 'has_mdio' flag.
Signed-off-by: NRadhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since 'has_mdio' flag is not used,sequence insmod->rmmod-> insmod
leads to failure as MDIO unregister doesn't happen in .remove().
Fix it by checking MII bus pointer instead.
Signed-off-by: NRadhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To ensure MDIO bus is not double freed in remove() path
assign lp->mii_bus after MDIO bus registration.
Signed-off-by: NRadhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit 079096f1 ("tcp/dccp: install syn_recv requests into ehash
table") introduced an optimization for the handling of child sockets
created for a new TCP connection.

But this optimization passes any data associated with the last ACK of the
connection handshake up the stack without verifying its checksum, because it
calls tcp_child_process(), which in turn calls tcp_rcv_state_process()
directly.  These lower-level processing functions do not do any checksum
verification.

Insert a tcp_checksum_complete call in the TCP_NEW_SYN_RECEIVE path to
fix this.

Fixes: 079096f1 ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: NFrank van der Linden <fllinden@amazon.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Tested-by: NBalbir Singh <bsingharora@gmail.com>
Reviewed-by: NBalbir Singh <bsingharora@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add missing of_node_put() call for device node returned by
of_parse_phandle().
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Acked-by: NTimur Tabi <timur@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now sctp GSO uses skb_gro_receive() to append the data into head
skb frag_list. However it actually only needs very few code from
skb_gro_receive(). Besides, NAPI_GRO_CB has to be set while most
of its members are not needed here.

This patch is to add sctp_packet_gso_append() to build GSO frames
instead of skb_gro_receive(), and it would avoid many unnecessary
checks and make the code clearer.

Note that sctp will use page frags instead of frag_list to build
GSO frames in another patch. But it may take time, as sctp's GSO
frames may have different size. skb_segment() can only split it
into the frags with the same size, which would break the border
of sctp chunks.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Reviewed-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter patches for your net tree:

1) Fix NULL pointer dereference from nf_nat_decode_session() if NAT is
   not loaded, from Prashant Bhole.

2) Fix socket extension module autoload.

3) Don't bogusly reject sets with the NFT_SET_EVAL flag set on from
   the dynset extension.

4) Fix races with nf_tables module removal and netns exit path,
   patches from Florian Westphal.

5) Don't hit BUG_ON if jumpstack goes too deep, instead hit
   WARN_ON_ONCE, from Taehee Yoo.

6) Another NULL pointer dereference from ctnetlink, again if NAT is
   not loaded, from Florian Westphal.

7) Fix x_tables match list corruption in xt_connmark module removal
   path, also from Florian.

8) nf_conncount doesn't properly deal with conntrack zones, hence
   garbage collector may get rid of entries in a different zone.
   From Yi-Hung Wei.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The max number of slots used in xennet_get_responses() is set to
MAX_SKB_FRAGS + (rx->status <= RX_COPY_THRESHOLD).

In old kernel-xen MAX_SKB_FRAGS was 18, while nowadays it is 17. This
difference is resulting in frequent messages "too many slots" and a
reduced network throughput for some workloads (factor 10 below that of
a kernel-xen based guest).

Replacing MAX_SKB_FRAGS by XEN_NETIF_NR_SLOTS_MIN for calculation of
the max number of slots to use solves that problem (tests showed no
more messages "too many slots" and throughput was as high as with the
kernel-xen based guest system).

Replace MAX_SKB_FRAGS-2 by XEN_NETIF_NR_SLOTS_MIN-1 in
netfront_tx_slot_available() for making it clearer what is really being
tested without actually modifying the tested value.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

smc->clcsock is an internal TCP socket, after TCP socket
converts to ->poll_mask, ->poll doesn't exist any more.
So just convert smc socket to ->poll_mask too.

Fixes: 2c7d3dac ("net/tcp: convert to ->poll_mask")
Reported-by: syzbot+f5066e369b2d5fff630f@syzkaller.appspotmail.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If 'of_device_get_match_data()' fails, we need to release some resources as
done in the other error handling path of this function.

Fixes: efacb568 ("net: stmmac: dwmac-meson: extend phy mode setting")
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

fix failures in the 'teardown' stage of test b7b8, probably a leftover of
commit 7c5995b3 ("tc-testing: fixed copy-pasting error in ife tests")

Fixes: a56e6bcd ("tc-testing: updated ife test cases")
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For each network interface linux network stack issue ndo_set_rx_mode call
in order to configure MAC address filters (e.g. for multicast filtering).
Currently ThunderX NICVF driver has only one ordered workqueue to process
such requests for all VFs.

And because of that it is possible that subsequent call to
ndo_set_rx_mode would corrupt data which is currently in use
by nicvf_set_rx_mode_task. Which in turn could cause following issue:
[...]
[   48.978341] Unable to handle kernel paging request at virtual address 1fffff0000000000
[   48.986275] Mem abort info:
[   48.989058]   Exception class = DABT (current EL), IL = 32 bits
[   48.994965]   SET = 0, FnV = 0
[   48.998020]   EA = 0, S1PTW = 0
[   49.001152] Data abort info:
[   49.004022]   ISV = 0, ISS = 0x00000004
[   49.007869]   CM = 0, WnR = 0
[   49.010826] [1fffff0000000000] address between user and kernel address ranges
[   49.017963] Internal error: Oops: 96000004 [#1] SMP
[...]
[   49.072138] task: ffff800fdd675400 task.stack: ffff000026440000
[   49.078051] PC is at prefetch_freepointer.isra.37+0x28/0x3c
[   49.083613] LR is at kmem_cache_alloc_trace+0xc8/0x1fc
[...]
[   49.272684] [<ffff0000082738f0>] prefetch_freepointer.isra.37+0x28/0x3c
[   49.279286] [<ffff000008276bc8>] kmem_cache_alloc_trace+0xc8/0x1fc
[   49.285455] [<ffff0000082c0c0c>] alloc_fdtable+0x78/0x134
[   49.290841] [<ffff0000082c15c0>] dup_fd+0x254/0x2f4
[   49.295709] [<ffff0000080d1954>] copy_process.isra.38.part.39+0x64c/0x1168
[   49.302572] [<ffff0000080d264c>] _do_fork+0xfc/0x3b0
[   49.307524] [<ffff0000080d29e8>] SyS_clone+0x44/0x50
[...]

This patch is to prevent such concurrent data write with spinlock.
Reported-by: NDean Nelson <dnelson@redhat.com>
Signed-off-by: NVadim Lomovtsev <Vadim.Lomovtsev@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The GPIO MDIO driver now needs only <linux/gpio/consumer.h>
so cut the legacy <linux/gpio.h> and <linux/of_gpio.h>
includes that are no longer used.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Stephen Hemminger says:

====================
hv_netvsc: notification and namespace fixes

This set of patches addresses two set of fixes. First it backs out
the common callback model which was merged in net-next without
completing all the review feedback or getting maintainer approval.

Then it fixes the transparent VF management code to handle network
namespaces.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When VF is added, the paravirtual device is already present
and may have been moved to another network namespace. For example,
sometimes the management interface is put in another net namespace
in some environments.

The VF should get moved to where the netvsc device is when the
VF is discovered. The user can move it later (if desired).
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When finding the parent netvsc device, the search needs to be across
all netvsc device instances (independent of network namespace).

Find parent device of VF using upper_dev_get routine which
searches only adjacent list.

Fixes: e8ff40d4 ("hv_netvsc: improve VF device matching")
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>

netns aware byref
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The callback model of handling network failover is not suitable
in the current form.
  1. It was merged without addressing all the review feedback.
  2. It was merged without approval of any of the netvsc maintainers.
  3. Design discussion on how to handle PV/VF fallback is still
     not complete.
  4. IMHO the code model using callbacks is trying to make
     something common which isn't.

Revert the netvsc specific changes for now. Does not impact ongoing
development of failover model for virtio.
Revisit this after a simpler library based failover kernel
routines are extracted.

This reverts
commit 9c6ffbac ("hv_netvsc: fix error return code in netvsc_probe()")
and
commit 1ff78076 ("netvsc: refactor notifier/event handling code to use the failover framework")
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
nfp: fix a warning, stats, naming and route leak

Various fixes for the NFP.  Patch 1 fixes a harmless GCC 8 warning.
Patch 2 ensures statistics are correct after users decrease the number
of channels/rings.  Patch 3 restores phy_port_name behaviour for flower,
ndo_get_phy_port_name used to return -EOPNOTSUPP on one of the netdevs,
and we need to keep it that way otherwise interface names may change.
Patch 4 fixes refcnt leak in flower tunnel offload code.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to release the refcnt on dst_entry in the route table, otherwise
we will leak the route.

Fixes: 8e6a9046 ("nfp: flower vxlan neighbour offload")
Signed-off-by: NPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: NLouis Peens <louis.peens@netronome.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

.ndo_get_phys_port_name was recently extended to support multi-vNIC
FWs.  These are firmwares which can have more than one vNIC per PF
without associated port (e.g. Adaptive Buffer Management FW), therefore
we need a way of distinguishing the vNICs.  Unfortunately, it's too
late to make flower use the same naming.  Flower users may depend on
.ndo_get_phys_port_name returning -EOPNOTSUPP, for example the name
udev gave the PF vNIC was just the bare PCI device-based name before
the change, and will have 'nn0' appended after.

To ensure flower's vNIC doesn't have phys_port_name attribute, add
a flag to vNIC struct and set it in flower code.  New projects will
not set the flag adhere to the naming scheme from the start.

Fixes: 51c1df83 ("nfp: assign vNIC id as phys_port_name of vNICs which are not ports")
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We are gathering software statistics on per-ring basis.
.ndo_get_stats64 handler adds the rings up.  Unfortunately
we are currently only adding up active rings, which means
that if user decreases the number of active rings the
statistics from deactivated rings will no longer be counted
and total interface statistics may go backwards.

Always sum all possible rings, the stats are allocated
statically for max number of rings, so we don't have to
worry about them being removed.  We could add the stats
up when user changes the ring count, but it seems unnecessary..
Adding up inactive rings will be very quick since no datapath
will be touching them.

Fixes: 164d1e9e ("nfp: add support for ethtool .set_channels")
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Once upon a time nfp_cpp_resource_find() took a name parameter,
which could be any user-chosen string.  Resources are identified
by a CRC32 hash of a 8 byte string, so we had to pad user input
with zeros to make sure CRC32 gave the correct result.

Since then nfp_cpp_resource_find() was made to operate on allocated
resources only (struct nfp_resource).  We kzalloc those so there is
no need to pad the strings and use memcmp.

This avoids a GCC 8 stringop-truncation warning:

In function ‘nfp_cpp_resource_find’,
    inlined from ‘nfp_resource_try_acquire’ at .../nfpcore/nfp_resource.c:153:8,
    inlined from ‘nfp_resource_acquire’ at .../nfpcore/nfp_resource.c:206:9:
    .../nfpcore/nfp_resource.c:108:2: warning:  strncpy’ output may be truncated copying 8 bytes from a string of length 8 [-Wstringop-truncation]
      strncpy(name_pad, res->name, sizeof(name_pad));
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Revert the patch mentioned in the subject because it breaks at least
the Avahi mDNS daemon. That patch namely causes the Ubuntu 18.04 Avahi
daemon to fail to start:

Jun 12 09:49:24 ubuntu-vm avahi-daemon[529]: Successfully called chroot().
Jun 12 09:49:24 ubuntu-vm avahi-daemon[529]: Successfully dropped remaining capabilities.
Jun 12 09:49:24 ubuntu-vm avahi-daemon[529]: No service file found in /etc/avahi/services.
Jun 12 09:49:24 ubuntu-vm avahi-daemon[529]: SO_REUSEADDR failed: Structure needs cleaning
Jun 12 09:49:24 ubuntu-vm avahi-daemon[529]: SO_REUSEADDR failed: Structure needs cleaning
Jun 12 09:49:24 ubuntu-vm avahi-daemon[529]: Failed to create server: No suitable network protocol available
Jun 12 09:49:24 ubuntu-vm avahi-daemon[529]: avahi-daemon 0.7 exiting.
Jun 12 09:49:24 ubuntu-vm systemd[1]: avahi-daemon.service: Main process exited, code=exited, status=255/n/a
Jun 12 09:49:24 ubuntu-vm systemd[1]: avahi-daemon.service: Failed with result 'exit-code'.
Jun 12 09:49:24 ubuntu-vm systemd[1]: Failed to start Avahi mDNS/DNS-SD Stack.

Fixes: f396922d ("net: do not allow changing SO_REUSEADDR/SO_REUSEPORT on bound sockets")
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, we use check_hlist() for garbage colleciton. However, we
use the ‘zone’ from the counted entry to query the existence of
existing entries in the hlist. This could be wrong when they are in
different zones, and this patch fixes this issue.

Fixes: e59ea3df ("netfilter: xt_connlimit: honor conntrack zone if available")
Signed-off-by: NYi-Hung Wei <yihung.wei@gmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This needs to use xt_unregister_targets, else new revision is left
on the list which then causes list to point to a target struct that has been free'd.

Fixes: 472a73e0 ("netfilter: xt_conntrack: Support bit-shifting for CONNMARK & MARK targets.")
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Dan Carpenter points out that deref occurs after NULL check, we should
re-fetch the pointer and check that instead.

Fixes: 2c205dd3 ("netfilter: add struct nf_nat_hook and use it")
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

When depth of chain is bigger than NFT_JUMP_STACK_SIZE, the nft_do_chain
crashes. But there is no need to crash hard here.
Suggested-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Acked-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

If net namespace is exiting while nf_tables module is being removed
we can oops:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000040
 IP: nf_tables_flowtable_event+0x43/0xf0 [nf_tables]
 PGD 0 P4D 0
 Oops: 0000 [#1] SMP PTI
 Modules linked in: nf_tables(-) nfnetlink [..]
  unregister_netdevice_notifier+0xdd/0x130
  nf_tables_module_exit+0x24/0x3a [nf_tables]
  SyS_delete_module+0x1c5/0x240
  do_syscall_64+0x74/0x190

Avoid this by attempting to take reference on the net namespace from
the notifiers.  If it fails the namespace is exiting already, and nft
core is taking care of cleanup work.

We also need to make sure the netdev hook type gets removed
before netns ops removal, else notifier might be invoked with device
event for a netns where net->nft was never initialised (because
pernet ops was removed beforehand).
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

We must first remove the nfnetlink protocol handler when nf_tables module
is unloaded -- we don't want userspace to submit new change requests once
we've started to tear down nft state.

Furthermore, nfnetlink must not call any subsystem function after
call_batch returned -EAGAIN.

EAGAIN means the subsys mutex was dropped, so its unlikely but possible that
nf_tables subsystem was removed due to 'rmmod nf_tables' on another cpu.

Therefore, we must abort batch completely and not move on to next part of
the batch.

Last, we can't invoke ->abort unless we've checked that the subsystem is
still registered.

Change netns exit path of nf_tables to make sure any incompleted
transaction gets removed on exit.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>