- 11 8月, 2010 7 次提交
-
-
由 InKi Dae 提交于
It has been working fine at 16bpp but in case of pixel format more then 24bpp it would occur distortedness situation on that mode. so this patch set the word swap control bit of WINCONx to 1 as default value. but it should be set to 0 in case that each ENLOCAL bit of WINCON0 ~ 2 registers is enabled. this issue would be solved with local path feature soon. Signed-off-by: NInKi Dae <inki.dae@samsung.com> Reviewed-by: KyungMin Park <kyungmin.park.samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NPawel Osciak <p.osciak@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 InKi Dae 提交于
s5pv210 has five window layers (window0 ~ 4), among them, window0 ~ 2 could be used for local path with fimc(capture device) and fimd writeback feature so this patch makes default window layer for UI to be set at machine code. Signed-off-by: NInKi Dae <inki.dae@samsung.com> Reviewed-by: KyungMin Park <kyungmin.park.samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NPawel Osciak <p.osciak@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Grazvydas Ignotas 提交于
Pandora has TI WL1251 attached on MMC3, which is non-standard SDIO chip. Make use MMC_QUIRK_NONSTD_SDIO to tell SDIO core about it. Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Bob Copeland <me@bobcopeland.com> Cc: Kalle Valo <kvalo@adurom.com> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Kishore Kadiyala <kishore.kadiyala@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Grazvydas Ignotas 提交于
This will allow us to set up special cards in machine drivers just after they are detected by MMC core. Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Bob Copeland <me@bobcopeland.com> Cc: Kalle Valo <kvalo@adurom.com> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Kishore Kadiyala <kishore.kadiyala@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ben Dooks 提交于
Add support for the dedicated FIFO mode on newer SoCs such as the S5PV210 partly to improve support and to fix the bug where any non-EP0 IN endpoint requires its own FIFO allocation. To fix this, we ensure that any non-zero IN endpoint is given a TXFIFO using the same allocation method as the periodic case (all our current hardware has enough FIFOs and FIFO memory for a 1:1 mapping) and ensure that the necessary transmission done interrupt is enabled. The default settings from reset for the core point all EPs at FIFO0, used for the control endpoint. However, the controller documentation states that all IN endpoints _must_ have a unique FIFO to avoid any contention during transmission. Note, this leaves us with a large IN FIFO for EP0 (which re-uses the old NPTXFIFO) for an endpoint which cannot shift more than a pair of packets at a time... this is a waste, but it looks like we cannot re-allocate space to the individual IN FIFOs as they are already maxed out (to be confirmed). Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Igor Grinberg 提交于
1) Introduce ulpi specific flags for control of the ulpi phy 2) Extend the generic ulpi driver with support for Function and Interface control of upli phy 3) Update the platforms using the generic ulpi driver with new ulpi flags 4) Remove the otg control flags not in use Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il> Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 hyc@symas.com 提交于
This patch is against the 2.6.34 source. Paraphrased from the 1989 BSD patch by David Borman @ cray.com: These are the changes needed for the kernel to support LINEMODE in the server. There is a new bit in the termios local flag word, EXTPROC. When this bit is set, several aspects of the terminal driver are disabled. Input line editing, character echo, and mapping of signals are all disabled. This allows the telnetd to turn off these functions when in linemode, but still keep track of what state the user wants the terminal to be in. New ioctl: TIOCSIG Generate a signal to processes in the current process group of the pty. There is a new mode for packet driver, the TIOCPKT_IOCTL bit. When packet mode is turned on in the pty, and the EXTPROC bit is set, then whenever the state of the pty is changed, the next read on the master side of the pty will have the TIOCPKT_IOCTL bit set. This allows the process on the server side of the pty to know when the state of the terminal has changed; it can then issue the appropriate ioctl to retrieve the new state. Since the original BSD patches accompanied the source code for telnet I've left that reference here, but obviously the feature is useful for any remote terminal protocol, including ssh. The corresponding feature has existed in the BSD tty driver since 1989. For historical reference, a good copy of the relevant files can be found here: http://anonsvn.mit.edu/viewvc/krb5/trunk/src/appl/telnet/?pathrev=17741Signed-off-by: NHoward Chu <hyc@symas.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 10 8月, 2010 1 次提交
-
-
由 Cesar Eduardo Barros 提交于
kunmap_atomic() is currently at level -4 on Rusty's "Hard To Misuse" list[1] ("Follow common convention and you'll get it wrong"), except in some architectures when CONFIG_DEBUG_HIGHMEM is set[2][3]. kunmap() takes a pointer to a struct page; kunmap_atomic(), however, takes takes a pointer to within the page itself. This seems to once in a while trip people up (the convention they are following is the one from kunmap()). Make it much harder to misuse, by moving it to level 9 on Rusty's list[4] ("The compiler/linker won't let you get it wrong"). This is done by refusing to build if the type of its first argument is a pointer to a struct page. The real kunmap_atomic() is renamed to kunmap_atomic_notypecheck() (which is what you would call in case for some strange reason calling it with a pointer to a struct page is not incorrect in your code). The previous version of this patch was compile tested on x86-64. [1] http://ozlabs.org/~rusty/index.cgi/tech/2008-04-01.html [2] In these cases, it is at level 5, "Do it right or it will always break at runtime." [3] At least mips and powerpc look very similar, and sparc also seems to share a common ancestor with both; there seems to be quite some degree of copy-and-paste coding here. The include/asm/highmem.h file for these three archs mention x86 CPUs at its top. [4] http://ozlabs.org/~rusty/index.cgi/tech/2008-03-30.html [5] As an aside, could someone tell me why mn10300 uses unsigned long as the first parameter of kunmap_atomic() instead of void *? Signed-off-by: NCesar Eduardo Barros <cesarb@cesarb.net> Cc: Russell King <linux@arm.linux.org.uk> (arch/arm) Cc: Ralf Baechle <ralf@linux-mips.org> (arch/mips) Cc: David Howells <dhowells@redhat.com> (arch/frv, arch/mn10300) Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> (arch/mn10300) Cc: Kyle McMartin <kyle@mcmartin.ca> (arch/parisc) Cc: Helge Deller <deller@gmx.de> (arch/parisc) Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> (arch/parisc) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> (arch/powerpc) Cc: Paul Mackerras <paulus@samba.org> (arch/powerpc) Cc: "David S. Miller" <davem@davemloft.net> (arch/sparc) Cc: Thomas Gleixner <tglx@linutronix.de> (arch/x86) Cc: Ingo Molnar <mingo@redhat.com> (arch/x86) Cc: "H. Peter Anvin" <hpa@zytor.com> (arch/x86) Cc: Arnd Bergmann <arnd@arndb.de> (include/asm-generic) Cc: Rusty Russell <rusty@rustcorp.com.au> ("Hard To Misuse" list) Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 8月, 2010 14 次提交
-
-
由 Colin Cross 提交于
v2: fixes from Russell King - include linux/io.h instead of mach/io.h v3: fixes from Linus Walleij - remove /16 * 16 from UART clock v3: - Fix checkpatch issues - make board init calls explicit - use clock init table to set clocks - remove panel Signed-off-by: NColin Cross <ccross@android.com> Signed-off-by: NErik Gilling <konkers@android.com>
-
由 Erik Gilling 提交于
v2: fixes from Russell King - include linux/io.h instead of asm/io.h v3: - Add drive strength controls - Replace typedef enums with plain enums Signed-off-by: NErik Gilling <konkers@android.com> Signed-off-by: NColin Cross <ccross@android.com>
-
由 Erik Gilling 提交于
v2: fixes from Mike Rapoport: - move gpio-names.h to arch/arm/mach-tegra fixes from Russell King - include linux/io.h and linux/gpio.h instead of asm/io.h and asm/gpio.h additional changes: - add macros to convert between irq and gpio numbers for platform data - change for_each_bit to for_each_set_bit in gpio.c v3: - minor bugfixes Signed-off-by: NColin Cross <ccross@android.com> Signed-off-by: NErik Gilling <konkers@android.com>
-
由 Colin Cross 提交于
v2: fixes from Russell King: - include linux/io.h instead of asm/io.h fixes from Gary King: - remove extra (and incorrect) irq definitions - use timer 3 instead of timer 1 for compatibility with other drivers - fix typo that disabled oneshot mode v3: - Implement sched_clock - Fix checkpatch issues fixes from Gary King: - Fix incorrect cycles calculation - Fix min_delta_ns assignment fixes from Linus Walleij: - use calc_mult_shift() instead of hard coding values Signed-off-by: NColin Cross <ccross@android.com>
-
由 Colin Cross 提交于
Signed-off-by: NColin Cross <ccross@android.com> Signed-off-by: NErik Gilling <konkers@android.com>
-
由 Colin Cross 提交于
v2: fixes from Russell King: - include linux/io.h instead of asm/io.h - fix whitespace in Kconfig - Use spin_lock_init to initialize lock - Return -ENOSYS instead of BUG for unimplemented clock ops - Use proper return values in tegra2 clock ops additional changes: - Rename some clocks to match dev_ids - add rate propagation - add debugfs entries - add support for clock listed in clk_lookup under multiple dev_ids v3: - Replace per-clock locking with global clock lock - Autodetect clock state on init - Let clock dividers pick next lower possible frequency - Add support for clock init tables - Minor bug fixes - Fix checkpatch issues Signed-off-by: NColin Cross <ccross@android.com>
-
由 Erik Gilling 提交于
v2: fixes from Russell King - include linux/io.h instead of asm/io.h and mach/io.h Signed-off-by: NColin Cross <ccross@android.com> Signed-off-by: NErik Gilling <konkers@android.com>
-
由 Erik Gilling 提交于
v2: Fixes from Mike Rapoport - remove unused header files (mach/dma.h and mach/nand.h) - remove tegra 1 references from Makefile.boot v2: fixes from Russell King - remove mach/io.h include from mach/iomap.h - fix whitespace in Kconfig v2: from Colin Cross - fix invalid immediate in debug-macro.S v3: - allow selection of multiple boards Signed-off-by: NColin Cross <ccross@android.com> Signed-off-by: NErik Gilling <konkers@android.com>
-
由 Rajashekhara, Sudhakar 提交于
Not all the channels and slots available on the DM646x EVM are used by the devices on the EVM. These resources can be used by the DSP to speed up codec operations. This patch reserves these channels for the DSP. Signed-off-by: NSudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: NSekhar Nori <nsekhar@ti.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Rajashekhara, Sudhakar 提交于
The drivers on da8xx/omapl EVMs do not utilize all the channels and slots provided by EDMA. Some of these are better utilitzed by the DSP on the SoC for speeding up codec operations. Reserve these channels/slots for the DSP. Signed-off-by: NSudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: NSekhar Nori <nsekhar@ti.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Rajashekhara, Sudhakar 提交于
Current EDMA driver is not taking care of EDMA channels/slots which are allocated from other processor, say DSP. If a channel/slot is allocated from DSP, the existing EDMA driver can still allocate the same resource on ARM. This patch enables the user to pass the channel/slots reserved for DSP as platform data. EDMA driver scans this list during probe and prepares a bitmap of channel/slots which can be used on ARM side. Trying to reserve channels by doing a 'pre-allocate' using edma_alloc_{slot|channel}() API does not work because 1) The reservation should be done in probe() to avoid race with other ARM side driver trying to use EDMA 2) The alloc channel API sets up the access through shadow region 0 which will be incorrect for DSP usage. It also sets up the channel <-> queue number mapping which is not required as DSP will likely do its own mapping anyway. 3) (minor) There is no API to allocate channels in bulk. Signed-off-by: NSudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NSekhar Nori <nsekhar@ti.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Sekhar Nori 提交于
This patch modifies the EDMA driver to expect the channel controller (CC) infomation passed on by the platform as a fixed size (EDMA_MAX_CC) array of pointers to structures. Doing so helps catch errors of the sort where the resource structure has information for more channel controllers than the number channel controller info structures defined. Such insufficient platform data would lead to illegal memory accesses. Signed-off-by: NSekhar Nori <nsekhar@ti.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Sekhar Nori 提交于
This patch helps get rid of the following sparse warnings of the type: CHECK arch/arm/mach-davinci/da830.c arch/arm/mach-davinci/da830.c:1026:3: warning: Initializer entry defined twice arch/arm/mach-davinci/da830.c:1027:3: also defined here coming from the irq priorities array init. Apart from one instance of genuinie repetition, most are are instances of multiple #defines of the same interrupt number. I have not removed the multiple definitions from the irq.h file in the hope that someone might decide to use them as shared interrupts at some point of time. The priority initialization however needs to be done only once and hence has been corrected. Signed-off-by: NSekhar Nori <nsekhar@ti.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Thomas Koeller 提交于
The register base address for the second serial port (UART1) was wrong. Signed-off-by: NThomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
- 05 8月, 2010 4 次提交
-
-
由 Jason Wessel 提交于
Now that ARM implements the notify die handlers, add the ability for the kernel debugger to receive the notifications. Signed-off-by: NJason Wessel <jason.wessel@windriver.com> CC: Russell King <linux@arm.linux.org.uk> CC: linux-arm-kernel@lists.infradead.org
-
由 Jason Wessel 提交于
Implement the ability to individually get and set registers for kdb and kgdb for arm. Signed-off-by: NJason Wessel <jason.wessel@windriver.com> CC: Russell King <linux@arm.linux.org.uk> CC: linux-arm-kernel@lists.infradead.org
-
由 Vaibhav Hiremath 提交于
With recent changes happened in OMAP2/3 DSS library for regulator interface, it is required to define DSI regulator supply, without this DSS (in turn Fbdev) fails to get regulator. Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
由 Tomi Valkeinen 提交于
Currently the update area on manual update displays is automatically enlargened to fully cover scaled overlays. This patch makes that optional, allowing the panel driver to choose if it's used or not. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
-
- 04 8月, 2010 14 次提交
-
-
由 Felipe Contreras 提交于
Remove kernel.h and module.h since they are not used correctly anyway. Also, remove device.h since it comes along with platform_device.h (always will I guess). Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com> Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
-
由 Felipe Contreras 提交于
omap{1,2}-mailbox are modules that provide the 'omap-mailbox' driver. Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com> Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
-
由 Felipe Contreras 提交于
Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com> Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
-
由 Felipe Contreras 提交于
No need to dynamically register mailboxes one by one. Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com> Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
-
由 Felipe Contreras 提交于
It's more extensible this way. Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com> Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
-
由 Felipe Contreras 提交于
Will be useful to identify them later. Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com> Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
-
由 Felipe Contreras 提交于
Nobody is using them. Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com> Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
-
由 Felipe Contreras 提交于
Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com> Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
-
由 Felipe Contreras 提交于
Based on omap2 code. Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com> Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
-
由 Felipe Contreras 提交于
CONFIG_OMAP_DSP is not in mainline, CONFIG_OMAP_MBOX_FWK is. Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com> Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
-
由 Felipe Contreras 提交于
Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com> Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
-
由 Felipe Contreras 提交于
OMAP4 ones messed up the organization. Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com> Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
-
由 Felipe Contreras 提交于
And fix a few compilation warnings. Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com> Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
-
由 Hiroshi DOYU 提交于
With this patch, you'll get the following sysfs directories. This structure implies that a single platform device, "omap2-mailbox" holds multiple logical mbox instances. This could be the base to add sysfs files for each logical mboxes. Then userland application can access a mbox through sysfs entries if necessary(ex: setting kfifo size dynamically) ~# tree -d -L 2 /sys/devices/platform/omap2-mailbox/ /sys/devices/platform/omap2-mailbox/ |-- driver -> ../../../bus/platform/drivers/omap2-mailbox |-- mbox | |-- dsp <- they are each instances of logical mailbox. | |-- ducati | |-- iva2 | |-- mbox01 | |-- mbox02 | |-- mbox03 | |-- ..... | `-- tesla |-- power `-- subsystem -> ../../../bus/platform This was wrongly dropped by: commit c7c158e5Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
-