- 22 7月, 2011 40 次提交
-
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill adapter->vlgrp and atl2_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill adapter->vlgrp and atlx_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill dev->vlgrp and ns83820_vlan_rx_register Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill np->vlgrp and netdev_vlan_rx_register Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill vptr->vlgrp and velocity_vlan_rx_register Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill ap->vlgrp and ace_vlan_rx_register - enable vlan hw accel always (kill vlan ifdefs) Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill adapter->vlgrp and ixgbevf_vlan_rx_register Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill priv->vlgrp and bdx_vlan_rx_register Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill sp->vlgrp and s2io_vlan_rx_register and s2io_vlan_rx_kill_vid (which does nothing and is never called :)) Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan path - kill qdev->vlgrp and qlge_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan path - kill priv->vlgrp and mlx4_en_vlan_rx_register Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill jme->vlgrp and jme_vlan_rx_register Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill adapter->vlgrp and igbvf_vlan_rx_register Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill priv->vlgrp and gfar_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill enic->vlan_group and enic_vlan_rx_register Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill pi->vlan_grp and cxgb4vf_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill adapter->vlan_grp and t1_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill bnad->vlan_grp and bnad_vlan_rx_register Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill adapter->vlgrp and atl1e_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill adapter->vlgrp and atl1c_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill lp->vlgrp and amd8111e_vlan_rx_register Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- remove useless vlan parameters and pointers Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
no longer used Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill port->vgrp and ehea_vlan_rx_register Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill nesvnic->vlan_grp and nes_netdev_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Since vlan_group_get_device and vlan_group is not going to be accessible from device drivers, introduce function which substitutes it. Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
else case remained forgotten. Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Conflicts: net/bluetooth/l2cap_core.c
-
由 Matt Evans 提交于
An implementation of a code generator for BPF programs to speed up packet filtering on PPC64, inspired by Eric Dumazet's x86-64 version. Filter code is generated as an ABI-compliant function in module_alloc()'d mem with stackframe & prologue/epilogue generated if required (simple filters don't need anything more than an li/blr). The filter's local variables, M[], live in registers. Supports all BPF opcodes, although "complicated" loads from negative packet offsets (e.g. SKF_LL_OFF) are not yet supported. There are a couple of further optimisations left for future work; many-pass assembly with branch-reach reduction and a register allocator to push M[] variables into volatile registers would improve the code quality further. This currently supports big-endian 64-bit PowerPC only (but is fairly simple to port to PPC32 or LE!). Enabled in the same way as x86-64: echo 1 > /proc/sys/net/core/bpf_jit_enable Or, enabled with extra debug output: echo 2 > /proc/sys/net/core/bpf_jit_enable Signed-off-by: NMatt Evans <matt@ozlabs.org> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
so that ethtool -i will display it correctly on big endian systems. Signed-off-by: NMichael Chan <mchan@broadcom.com> Reviewed-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The bnx2fc driver needs to handle netdev events on VLAN devices. Signed-off-by: NMichael Chan <mchan@broadcom.com> Reviewed-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Otherwise, the firmware will not respond and we'll have to wait for timeout. Refactor the wait loop we already have into a separate function for this purpose. Signed-off-by: NMichael Chan <mchan@broadcom.com> Reviewed-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Include FCoE CID space only for E2_PLUS devices. Remove old CID offset adjustments that are no longer needed. Signed-off-by: NMichael Chan <mchan@broadcom.com> Reviewed-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch fixes NVRAM selftest failures for 5720 devices by fixing the checksum area size. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
Newer VPD datablocks can exceed the size the tg3 driver is traditionally used to. This can cause some of the routines that operate on the VPD data to fail when in-fact they could have succeeded had they known the correct size. This patch fixes the problem. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-