On the Xonar Essence ST/STX, the connector J14 has been confirmed to be
a digital input, so enable it in the driver.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Newer RME cards like RayDAT and AIO support 32 samples per period. This
value is encoded as {1,1,1} in the HDSP_LatencyMask bits in the control
register.

Since {1,1,1} is also the representation for 8192 samples/period on
older RME cards, we have to special case 32 samples and 32768 bytes
according to the actual card.
Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Currently, hdspm_decode_latency is called several times, violating the
DRY principle. Given that we need to distinguish between old and new
cards when decoding the latency bits in the control register, introduce
hdspm_get_latency() to provide the required functionality.
Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

On newer RME cards like RayDAT and AIO, the 8192 samples per period size
are no longer supported. Instead, setting all three bits of
HDSP_LatencyMask to one ({1,1,1}) now corresponds to 32 samples per
period.

To make this more obvious to future developers, let's reorder the array
according to their bit representation, starting at 64 ({0,0,0}) up to
4096 ({1,1,0}) and finally 32 ({1,1,1}).

Note that this patch doesn't change semantics.
Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

On newer RME cards like RayDAT and AIO, the lower bound is 32 samples
per period in contrast to 64 samples as seen on older cards.

We hence lower period_bytes_min to 32 * 4. Four bytes per sample.
Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Older RME cards like MADI and AES support period sizes of 8192 samples.
The original hdspm driver already featured this value, apparently, it
was lost during the rewrite.
Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_azf3328_dbgcallenter is called at the very beginning of the function,
so it could be useful to call snd_azf3328_dbgcallleave at all exit points.
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In commit 45eebda7, it add new function stac_vrefout_set, but it
is only used in code between CONFIG_SND_HDA_POWER_SAVE macro, so
add the macro to avoid such warning:

  sound/pci/hda/patch_sigmatel.c:676:12: warning: 'stac_vrefout_set' defined but not used
Signed-off-by: NWang Shaoyan <wangshaoyan.pt@taobao.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

CONFIG_SND_TEA575X is enabled by RADIO_SF16FMR2, but the latter one is
no PCI device.  Since tea575x-tuner itself is independent from the board
bus type, the config should be moved out of SND_PCI dependency.
Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Acked-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

 Use kzalloc rather than kmalloc followed by memset with 0

 This considers some simple cases that are common and easy to validate
 Note in particular that there are no ...s in the rule, so all of the
 matched code has to be contiguous

 The semantic patch that makes this output is available
 in scripts/coccinelle/api/alloc/kzalloc-simple.cocci.

 More information about semantic patching is available at
 http://coccinelle.lip6.fr/Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

  sound/pci/hda/patch_via.c:2087: warning: 'dac' may be used uninitialized in this function
Signed-off-by: NWang Shaoyan <wangshaoyan.pt@taobao.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Put the exception checks for io_type switch() for possible mistakes in
future.  Also this shuts up annoying compile warnings.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It works fine with auto-parser and now the digital mic workaround was
implemented in auto-parser fixup, let's drop the static model quirks for
these models.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The digital-mic unit on ASUS Eee PC gives PDM signals instead of the
normal stereo PCM, thus you can't record a mono stream from the stereo
stream as is; the summed stereo signal results in almost zero level, and
you'll hear only soft noise.

As a workaround, use ALC269-specific COEF to manipulate the dmic route
for mono, like used for ALC271x.  This is implemented as a fix-up, thus
it works only with model=auto or without REALTEK_QUIRKS Kconfig.
Reported-and-tested-by: NPavel Roskin <proski@gnu.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Avoids assigning possibly invalid address to pa, even if it
is never dereferenced.
Correct error response to reflect request object/function ids.
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We leak the memory allocated to 'firmware' when we fail to
release_firmware() after a kmalloc() failure in hpi_dsp_code_open().
This patch should take care of the leak.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Apparently, there are multiple old firmware revisions in the wild for
the PCI RME MADI cards. Just add them to the list of supported devices
and treat them like their modern counterparts.
Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In slave mode, the card can only detect the base frequency (32..48kHz)
on the MADI link (exception: 96k frames), so the real external sample
rate is this base frequency multiplied by 1, 2 or 4 depending on the
speed mode.

This patch enables 64..192kHz sample rates in clock slave mode, which
failed before due to an alleged sample rate mismatch between the MADI
link (e.g., 48kHz) and the application in DS/QS mode (e.g., 96kHz,
192kHz).
Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When running in slave mode (no clock master), there is no way to
determine the real wirespeed on the MADI link (single/double/quad
speed). Like physical gear, simply provide the user with a tristate
switch to select the appropriate format.
Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Convert radio-sf16fmr2 to use generic TEA575x implementation. Most of the
driver code goes away as SF16-FMR2 is basically just a TEA5757 tuner
connected to ISA bus.
The card can optionally be equipped with PT2254A volume control (equivalent
of TC9154AP) - the volume setting is completely reworked (with balance control
added) and tested.
Signed-off-by: NOndrej Zary <linux@rainbow-software.org>
Acked-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Copying hp_pins and speaker_pins from line_out_pins may confuse the
parser, and it can lead to duplicated initializations for the same pin
with a wrong DAC assignment.  The problem appears in 3.0 kernel code.

Cc: <stable@kernel.org> (for 3.0)
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

"adapter" is used as an array index in the adapters[] array so
the off by one would make us read past the end.

1c073b67 "ALSA: asihpi - Remove spurious adapter index check"
reverted Dan Rosenberg's check that would have prevented the
overflow here.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Somce quirk models don't set adc_nids but let the parser filling it.
But the recent code has unnecessary NULL-checks of spec->input_mux,
and it resulted in NULL dereferences.
This patch fixes that regression.
Reported-and-tested-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixes bug introduced by 1c073b67.
Also declare pa local to block in which it is used.
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch also registers all necessary callbacks to support mute LED
only when such control is enabled. And it keeps codec AFG in D0 or D1
state all the time when aggressive power managemnt is enabled for vref-out
control (and mute LED) work correctly.
Signed-off-by: NVitaliy Kulikov <Vitaliy.Kulikov@idt.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>
Signed-off-by: NArun Sharma <asharma@fb.com>
Reviewed-by: NEric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This update includes the changes necessary for supporting the
CS421x family of codecs.  Previously this file only supported
the CS420x family of codecs.

This file also contains init verbs to correct several issues in
the CS421x hardware.

Behavior between the CS421x and CS420x codec families is similar,
so several functions have been reused with "if" statements to
determine which codec family (CS421x or CS420x) is present.

Also, this file will be updated sometime in the near future in
order to add support for a system using CS421x that requires
mono mix on the speaker output only.

[Fix const usages and adaption for new APIs by tiwai]
Signed-off-by: NTim Howe <tim.howe@cirrus.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The procedure for codec D-state change may have exceptional cases
depending on the codec chip, such as a longer delay or suppressing D3.

This patch adds a new codec ops, set_power_state() to override the system
default function.  For ease of porting, snd_hda_codec_set_power_to_all()
helper function is extracted from the default set_power_state() function.

As an example, the Conexant codec-specific delay is removed from the
default routine but moved to patch_conexant.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a new ops, post_suspend(), which is called after suspend() ops is
performed.  This is called only in the case of the real PM suspend, and
the codec driver can use this for further changing of D-state or
clearing the LED, etc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It makes little sense to enable power-saving without PM.
This removes SND_HDA_NEEDS_RESUME define so that we can use CONFIG_PM
in all places.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds checking of mute state on all outputs besides just
speakers to calculate the master mute state for mute led support.
It also renames and splits the function that does it for better code
clarity.
Signed-off-by: NVitaliy Kulikov <Vitaliy.Kulikov@idt.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Codec state is not restored immediately on resume but on the first
access when power-save is enabled.  That leads to an invalid mute led
state after resume until either sound is played or some control is
changed.  This patch adds a possibility for a vendor specific patch to
restore codec state immediately after resume if required.  And it adds
code to restore IDT codecs state immediately on resume on HP systems
with mute led support.
Signed-off-by: NVitaliy Kulikov <Vitaliy.Kulikov@idt.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NVitaliy Kulikov <Vitaliy.Kulikov@idt.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Formatting a PCM name is useful for module debug too.
Add snd_prefix when making function public.

[minor coding-style fixes by tiwai]
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix a regression in the DAC filling code in patch_realtek.c.  The already
filled DACs in multiout.dac_nids[] were ignored because of num_dacs=0,
thus always pointed to the first DAC.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HPI Version is used to check for firmware compatibility.
This version  will accept 4.08.xx released firmware,
and will also accept 4.09.xx beta firmware
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Mute functionality was recently added to the DSP firmware
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add names corresponding to new HPI node types.
Shorten some names so that constructed names don't overflow the
maximum name length.
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>