- 23 4月, 2008 7 次提交
-
-
由 Jean Delvare 提交于
Split the handling of the I2C_RDWR and I2C_SMBUS ioctls to their own functions. This limits the stack usage, saves one level of indentation and makes the code more readable. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Sean MacLennan 提交于
This patch allows the i2c-ibm_iic driver to be built either as an ocp driver or an of_platform driver. This allows it to run under the powerpc arch but maintains backward compatibility with the ppc arch. Signed-off-by: NSean MacLennan <smaclennan@pikatech.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Sean MacLennan 提交于
Change the log levels based on feedback from linxppc-dev. Signed-off-by: NSean MacLennan <smaclennan@pikatech.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Wolfram Sang 提交于
Tested on a blackfin. Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Wolfram Sang 提交于
The separation between algorithm and adapter was unsharp at places. This was partly hidden by the fact, that the ISA-driver allowed just one instance and had all private data in static variables. This patch makes neccessary preparations to add a platform driver on top of the algorithm, while still supporting ISA. Note: Due to lack of hardware, the ISA-driver could not be tested except that it builds. Concerning the core struct i2c_algo_pca_data: - A private data field was added, all hardware dependant data may go here. Similar to other algorithms, now a pointer to this data is passed to the adapter's functions. In order to make as less changes as possible to the ISA-driver, it leaves the private data empty and still only uses its static variables. - A "reset_chip" function pointer was added; such a functionality must come from the adapter, not the algorithm. - use a variable "i2c_clock" instead of a function pointer "get_clock", allowing for write access to a default in case a wrong value was supplied. In the algorithm-file: - move "i2c-pca-algo.h" into "linux/i2c-algo-pca.h" - now using per_instance timeout values (i2c_adap->timeout) - error messages specify the device, not only the driver name - restructure initialization to easily support "i2c_add_numbered_adapter" - drop "retries" and "own" (i2c address) as they were unused (The state-machine for I2C-communication was not touched.) In the ISA-driver: - adapt to new algorithm Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Wolfram Sang 提交于
Remove trailing whitespaces to make further patches more readable. Also remove an unnecessary UTF-char for simplicity ("us" for microseconds is fine enough). Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
The algorithm drivers are helper drivers that are selected automatically as needed. There's no point in listing them in the config menu, it can only confuse users and waste their time. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 22 4月, 2008 16 次提交
-
-
由 Roland Dreier 提交于
Match what the PCI specification uses. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
The PCI MSI interface is stubbed out properly so that all the functions just return failure if PCI_MSI=n, so there's no reason to have "#ifdef CONFIG_PCI_MSI" blocks in ipath_iba7220.c. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Before IBA7220 support was added, the ipath driver didn't support any hardware unless PCI_MSI and/or HT_IRQ was enabled. However, the IBA7220 can generate INTx interrupts, so it makes sense to allow the driver to be build even if PCI_MSI=n and HT_IRQ=n. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
The new IBA7220 code added a call to ipath_init_iba7220_funcs() that is compiled unconditionally, but only built the IBA7220 code if PCI_MSI is enabled. Fix this by building the IBA7220 file unconditonally. This fixes build breakage when PCI_MSI=n, HT_IRQ=y and INFINIBAND_IPATH=y reported by Ingo Molnar <mingo@elte.hu>: drivers/built-in.o: In function `ipath_init_one': ipath_driver.c:(.devinit.text+0x1e5bc): undefined reference to `ipath_init_iba7220_funcs' Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
IB/ipath: Remove reference to dev->class_dev Commit 124b4dcb ("IB/ipath: add calls to new 7220 code and enable in build") inadvertently added core to set dev->class_dev.dev back into ib_ipath. This is completely redundant since commit 1912ffbb ("IB: Set class_dev->dev in core for nice device symlink"), which removed class_dev setting from low-level drivers, and also will break the build when class_dev is removed completely from struct ib_device. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Paul Bolle 提交于
Describe disable_sma parameter with its name rather than the internal ib_ipath_disable_sma variable name, so that the description shows up properly in modinfo. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Acked-by: NRalph Campbell <ralph.campbell@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Remove redundant static declarations of functions that are defined before they are used in the source. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Andrew 提交于
drivers/md/*.[ch] contains only one more printk line with a trailing space. Remove it. Signed-off-by: NNick Andrew <nick@nick-andrew.net> Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
-
由 Sebastian Siewior 提交于
Spelling fixes for dmaengine.[ch] Signed-off-by: NSebastian Siewior <bigeasy@linutronix.de> Acked-by: NMaciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
-
由 Tobias Klauser 提交于
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
-
由 Tobias Klauser 提交于
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
-
由 Tobias Klauser 提交于
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
-
由 Tobias Klauser 提交于
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
-
由 Tobias Klauser 提交于
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
-
由 Tobias Klauser 提交于
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
-
- 21 4月, 2008 17 次提交
-
-
由 Harvey Harrison 提交于
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
* Fix oops on cciss rmmod due to calling pci_free_consistent with irqs disabled. Signed-off-by: NStephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
Fix race condition between cciss_init_one(), cciss_update_drive_info(), and cciss_check_queues(). Signed-off-by: NStephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 FUJITA Tomonori 提交于
blk_rq_map_user adjusts bi_size of the last bio. It breaks the rule that req->data_len (the true data length) is equal to sum(bio). It broke the scsi command completion code. commit e97a294e was introduced to fix the above issue. However, the partial completion code doesn't work with it. The commit is also a layer violation (scsi mid-layer should not know about the block layer's padding). This patch moves the padding adjustment to blk_rq_map_sg (suggested by James). The padding works like the drain buffer. This patch breaks the rule that req->data_len is equal to sum(sg), however, the drain buffer already broke it. So this patch just restores the rule that req->data_len is equal to sub(bio) without breaking anything new. Now when a low level driver needs padding, blk_rq_map_user and blk_rq_map_user_iov guarantee there's enough room for padding. blk_rq_map_sg can safely extend the last entry of a scatter list. blk_rq_map_sg must extend the last entry of a scatter list only for a request that got through bio_copy_user_iov. This patches introduces new REQ_COPY_USER flag. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Tejun Heo <htejun@gmail.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Laurent Vivier 提交于
This patch allows to use loop device with partitionned disk image. Original behavior of loop is not modified. A new parameter is introduced to define how many partition we want to be able to manage per loop device. This parameter is "max_part". For instance, to manage 63 partitions / loop device, we will do: # modprobe loop max_part=63 # ls -l /dev/loop?* brw-rw---- 1 root disk 7, 0 2008-03-05 14:55 /dev/loop0 brw-rw---- 1 root disk 7, 64 2008-03-05 14:55 /dev/loop1 brw-rw---- 1 root disk 7, 128 2008-03-05 14:55 /dev/loop2 brw-rw---- 1 root disk 7, 192 2008-03-05 14:55 /dev/loop3 brw-rw---- 1 root disk 7, 256 2008-03-05 14:55 /dev/loop4 brw-rw---- 1 root disk 7, 320 2008-03-05 14:55 /dev/loop5 brw-rw---- 1 root disk 7, 384 2008-03-05 14:55 /dev/loop6 brw-rw---- 1 root disk 7, 448 2008-03-05 14:55 /dev/loop7 And to attach a raw partitionned disk image, the original losetup is used: # losetup -f etch.img # ls -l /dev/loop?* brw-rw---- 1 root disk 7, 0 2008-03-05 14:55 /dev/loop0 brw-rw---- 1 root disk 7, 1 2008-03-05 14:57 /dev/loop0p1 brw-rw---- 1 root disk 7, 2 2008-03-05 14:57 /dev/loop0p2 brw-rw---- 1 root disk 7, 5 2008-03-05 14:57 /dev/loop0p5 brw-rw---- 1 root disk 7, 64 2008-03-05 14:55 /dev/loop1 brw-rw---- 1 root disk 7, 128 2008-03-05 14:55 /dev/loop2 brw-rw---- 1 root disk 7, 192 2008-03-05 14:55 /dev/loop3 brw-rw---- 1 root disk 7, 256 2008-03-05 14:55 /dev/loop4 brw-rw---- 1 root disk 7, 320 2008-03-05 14:55 /dev/loop5 brw-rw---- 1 root disk 7, 384 2008-03-05 14:55 /dev/loop6 brw-rw---- 1 root disk 7, 448 2008-03-05 14:55 /dev/loop7 # mount /dev/loop0p1 /mnt # ls /mnt bench cdrom home lib mnt root srv usr bin dev initrd lost+found opt sbin sys var boot etc initrd.img media proc selinux tmp vmlinuz # umount /mnt # losetup -d /dev/loop0 Of course, the same behavior can be done using kpartx on a loop device, but modifying loop avoids to stack several layers of block device (loop + device mapper), this is a very light modification (40% of modifications are to manage the new parameter). Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Thomas Bogendoerfer 提交于
If cdrom commands are issued to a scsi drive in most cases the buffer will be filled via dma. This leads to bad stack corruption on non coherent platforms, because the buffers are neither cache line aligned nor is the size a multiple of the cache line size. Using kmalloced buffers avoids this. Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Akinobu Mita 提交于
Now unregister_cdrom() always returns 0. Make it return void and update all callers that check the return value. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk> Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Akinobu Mita 提交于
Use list_head for cdrom_device_info list instead of opencoded singly list handling. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Akinobu Mita 提交于
This patch protects the list of cdrom_device_info by cdrom_mutex when the file in /proc/sys/dev/cdrom/ is written. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Akinobu Mita 提交于
This patch eliminates hardcoded return value of register_cdrom(). It also changes the return value to -EINVAL. It is more appropriate than -2 (-ENOENT) because it is only happen invalid usage of register_cdrom() by broken cdrom driver. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Akinobu Mita 提交于
This patch removes #ifdef for CONFIG_SYSCTL by defining empty cdrom_sysctl_register and cdrom_sysctl_unregister when CONFIG_SYSCTL is not defined. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 mark gross 提交于
The following patch is an update to use an array instead of a list of IOVA's in the implementation of defered iotlb flushes. It takes inspiration from sba_iommu.c I like this implementation better as it encapsulates the batch process within intel-iommu.c, and no longer touches iova.h (which is shared) Performance data: Netperf 32byte UDP streaming 2.6.25-rc3-mm1: IOMMU-strict : 58Mps @ 62% cpu NO-IOMMU : 71Mbs @ 41% cpu List-based IOMMU-default-batched-IOTLB flush: 66Mbps @ 57% cpu with this patch: IOMMU-strict : 73Mps @ 75% cpu NO-IOMMU : 74Mbs @ 42% cpu Array-based IOMMU-default-batched-IOTLB flush: 72Mbps @ 62% cpu Signed-off-by: <mgross@linux.intel.com> Cc: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
WARNING: drivers/pci/built-in.o(.text+0x28ee9): Section mismatch in reference from the function pci_bus_assign_resources() to the function .devinit.text:pci_setup_bridge() Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
WARNING: drivers/pci/built-in.o(.text+0x28e1f): Section mismatch in reference from the function pci_bus_size_bridges() to the function .devinit.text:pci_bus_size_cardbus() Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
WARNING: drivers/pci/built-in.o(.text+0x150f): Section mismatch in reference from the function pci_scan_single_device() to the function .devinit.text:pci_scan_device() Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
WARNING: drivers/pci/built-in.o(.text+0xc4c): Section mismatch in reference from the function pci_add_new_bus() to the function .devinit.text:pci_alloc_child_bus() Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Harvey Harrison 提交于
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-