This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.

It also removes a couple of unnecessary key length checks that
are already performed by the crypto API.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: NHoria Geantă <horia.geanta@nxp.com>
Tested-by: NIuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.

This patch also removes the bogus CFB 3DES modes that only work
with a short 3DES key not otherwise allowed by the crypto API.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds a requirement to the generic 3DES implementation
such that 2-key 3DES (K1 == K3) is no longer allowed in FIPS mode.

We will also provide helpers that may be used by drivers that
implement 3DES to make the same check.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In the VMX implementations of AES and AES modes, return -EINVAL when an
invalid key length is provided, rather than some unusual error code
determined via a series of additions.  This makes the behavior match the
other AES implementations in the kernel's crypto API.

Cc: Daniel Axtens <dja@axtens.net>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

If the user-provided IV needs to be aligned to the algorithm's
alignmask, then skcipher_walk_virt() copies the IV into a new aligned
buffer walk.iv.  But skcipher_walk_virt() can fail afterwards, and then
if the caller unconditionally accesses walk.iv, it's a use-after-free.

xts-aes-neonbs doesn't set an alignmask, so currently it isn't affected
by this despite unconditionally accessing walk.iv.  However this is more
subtle than desired, and unconditionally accessing walk.iv has caused a
real problem in other algorithms.  Thus, update xts-aes-neonbs to start
checking the return value of skcipher_walk_virt().

Fixes: 1abee99e ("crypto: arm64/aes - reimplement bit-sliced ARM/NEON implementation for arm64")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

If the user-provided IV needs to be aligned to the algorithm's
alignmask, then skcipher_walk_virt() copies the IV into a new aligned
buffer walk.iv.  But skcipher_walk_virt() can fail afterwards, and then
if the caller unconditionally accesses walk.iv, it's a use-after-free.

arm32 xts-aes-neonbs doesn't set an alignmask, so currently it isn't
affected by this despite unconditionally accessing walk.iv.  However
this is more subtle than desired, and it was actually broken prior to
the alignmask being removed by commit cc477bf6 ("crypto: arm/aes -
replace bit-sliced OpenSSL NEON code").  Thus, update xts-aes-neonbs to
start checking the return value of skcipher_walk_virt().

Fixes: e4e7f10b ("ARM: add support for bit sliced AES using NEON instructions")
Cc: <stable@vger.kernel.org> # v3.13+
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

If the user-provided IV needs to be aligned to the algorithm's
alignmask, then skcipher_walk_virt() copies the IV into a new aligned
buffer walk.iv.  But skcipher_walk_virt() can fail afterwards, and then
if the caller unconditionally accesses walk.iv, it's a use-after-free.

salsa20-generic doesn't set an alignmask, so currently it isn't affected
by this despite unconditionally accessing walk.iv.  However this is more
subtle than desired, and it was actually broken prior to the alignmask
being removed by commit b62b3db7 ("crypto: salsa20-generic - cleanup
and convert to skcipher API").

Since salsa20-generic does not update the IV and does not need any IV
alignment, update it to use req->iv instead of walk.iv.

Fixes: 2407d608 ("[CRYPTO] salsa20: Salsa20 stream cipher")
Cc: stable@vger.kernel.org
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

If the user-provided IV needs to be aligned to the algorithm's
alignmask, then skcipher_walk_virt() copies the IV into a new aligned
buffer walk.iv.  But skcipher_walk_virt() can fail afterwards, and then
if the caller unconditionally accesses walk.iv, it's a use-after-free.

Fix this in the LRW template by checking the return value of
skcipher_walk_virt().

This bug was detected by my patches that improve testmgr to fuzz
algorithms against their generic implementation.  When the extra
self-tests were run on a KASAN-enabled kernel, a KASAN use-after-free
splat occured during lrw(aes) testing.

Fixes: c778f96b ("crypto: lrw - Optimize tweak computation")
Cc: <stable@vger.kernel.org> # v4.20+
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/crypto/mxs-dcp.c: In function 'dcp_chan_thread_sha':
drivers/crypto/mxs-dcp.c:707:11: warning:
 variable 'fini' set but not used [-Wunused-but-set-variable]

It's not used since commit d80771c0 ("crypto: mxs-dcp - Fix wait
logic on chan threads"),so can be removed.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

IS_ENABLED should be reserved for CONFIG_<FOO> uses so convert
the uses of IS_ENABLED with a #define to __is_defined.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In function caam_jr_dequeue(), a full memory barrier is used before
writing response job ring's register to signal removal of the completed
job. Therefore for writing the register, we do not need another write
memory barrier. Hence it is removed by replacing the call to wr_reg32()
with a newly defined function wr_reg32_relaxed().
Signed-off-by: NVakul Garg <vakul.garg@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Currently, we free the psp_master if the PLATFORM_INIT fails during the
SEV FW probe. If psp_master is freed then driver does not invoke the PSP
FW. As per SEV FW spec, there are several commands (PLATFORM_RESET,
PLATFORM_STATUS, GET_ID etc) which can be executed in the UNINIT state
We should not free the psp_master when PLATFORM_INIT fails.

Fixes: 200664d5 ("crypto: ccp: Add SEV support")
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Gary Hook <gary.hook@amd.com>
Cc: stable@vger.kernel.org # 4.19.y
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Change the wait condition to check if the hash is busy.
Context can be saved as soon as hash has finishing processing
data. Remove unused lock in the device structure.
Signed-off-by: NLionel Debieve <lionel.debieve@st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This driver has been completely broken since the very beginning
because it doesn't even have a setkey function.  This means that
nobody has ever used it as it would crash during setkey.

This patch removes this driver.

Fixes: d293b640 ("crypto: mxc-scc - add basic driver for the...")
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add a default quality to hw_random device to be
automatically set as new default entropy. Setting
random quality will decrease the crng init time by
switching to this hardware random source.
Signed-off-by: NLionel Debieve <lionel.debieve@st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

No remove function implemented yet in the driver.
Without remove function, the pm_runtime implementation
complains when removing and probing again the driver.
Signed-off-by: NLionel Debieve <lionel.debieve@st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add a module parameter cryptomgr.panic_on_fail which causes the kernel
to panic if any crypto self-tests fail.

Use cases:

- More easily detect crypto self-test failures by boot testing,
  e.g. on KernelCI.
- Get a bug report if syzkaller manages to use the template system to
  instantiate an algorithm that fails its self-tests.

The command-line option "fips=1" already does this, but it also makes
other changes not wanted for general testing, such as disabling
"unapproved" algorithms.  panic_on_fail just does what it says.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

My patches to make testmgr fuzz algorithms against their generic
implementation detected that the arm64 implementations of "cbcmac(aes)"
handle empty messages differently from the cbcmac template.  Namely, the
arm64 implementations return the encrypted initial value, but the cbcmac
template returns the initial value directly.

This isn't actually a meaningful case because any user of cbcmac needs
to prepend the message length, as CCM does; otherwise it's insecure.
However, we should keep the behavior consistent; at the very least this
makes testing easier.

Do it the easy way, which is to change the arm64 implementations to have
the same behavior as the cbcmac template.

For what it's worth, ghash does things essentially the same way: it
returns its initial value when given an empty message, even though in
practice ghash is never passed an empty message.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

My patches to make testmgr fuzz algorithms against their generic
implementation detected that the arm64 implementations of
"cts(cbc(aes))" handle empty messages differently from the cts template.
Namely, the arm64 implementations forbids (with -EINVAL) all messages
shorter than the block size, including the empty message; but the cts
template permits empty messages as a special case.

No user should be CTS-encrypting/decrypting empty messages, but we need
to keep the behavior consistent.  Unfortunately, as noted in the source
of OpenSSL's CTS implementation [1], there's no common specification for
CTS.  This makes it somewhat debatable what the behavior should be.

However, all CTS specifications seem to agree that messages shorter than
the block size are not allowed, and OpenSSL follows this in both CTS
conventions it implements.  It would also simplify the user-visible
semantics to have empty messages no longer be a special case.

Therefore, make the cts template return -EINVAL on *all* messages
shorter than the block size, including the empty message.

[1] https://github.com/openssl/openssl/blob/master/crypto/modes/cts128.cSigned-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Don't cast the data buffer directly to streebog_uint512, as this
violates alignment rules.

Fixes: fe18957e ("crypto: streebog - add Streebog hash function")
Cc: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Reviewed-by: NVitaly Chikunov <vt@altlinux.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

If the rfc7539 template is instantiated with specific implementations,
e.g. "rfc7539(chacha20-generic,poly1305-generic)" rather than
"rfc7539(chacha20,poly1305)", then the implementation names end up
included in the instance's cra_name.  This is incorrect because it then
prevents all users from allocating "rfc7539(chacha20,poly1305)", if the
highest priority implementations of chacha20 and poly1305 were selected.
Also, the self-tests aren't run on an instance allocated in this way.

Fix it by setting the instance's cra_name from the underlying
algorithms' actual cra_names, rather than from the requested names.
This matches what other templates do.

Fixes: 71ebc4d1 ("crypto: chacha20poly1305 - Add a ChaCha20-Poly1305 AEAD construction, RFC7539")
Cc: <stable@vger.kernel.org> # v4.2+
Cc: Martin Willi <martin@strongswan.org>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Reviewed-by: NMartin Willi <martin@strongswan.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

skcipher_walk_done() assumes it's a bug if, after the "slow" path is
executed where the next chunk of data is processed via a bounce buffer,
the algorithm says it didn't process all bytes.  Thus it WARNs on this.

However, this can happen legitimately when the message needs to be
evenly divisible into "blocks" but isn't, and the algorithm has a
'walksize' greater than the block size.  For example, ecb-aes-neonbs
sets 'walksize' to 128 bytes and only supports messages evenly divisible
into 16-byte blocks.  If, say, 17 message bytes remain but they straddle
scatterlist elements, the skcipher_walk code will take the "slow" path
and pass the algorithm all 17 bytes in the bounce buffer.  But the
algorithm will only be able to process 16 bytes, triggering the WARN.

Fix this by just removing the WARN_ON().  Returning -EINVAL, as the code
already does, is the right behavior.

This bug was detected by my patches that improve testmgr to fuzz
algorithms against their generic implementation.

Fixes: b286d8b1 ("crypto: skcipher - Add skcipher walk interface")
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The ->digest() method of crct10dif-pclmul reads the current CRC value
from the shash_desc context.  But this value is uninitialized, causing
crypto_shash_digest() to compute the wrong result.  Fix it.

Probably this wasn't noticed before because lib/crc-t10dif.c only uses
crypto_shash_update(), not crypto_shash_digest().  Likewise,
crypto_shash_digest() is not yet tested by the crypto self-tests because
those only test the ahash API which only uses shash init/update/final.

Fixes: 0b95a7f8 ("crypto: crct10dif - Glue code to cast accelerated CRCT10DIF assembly as a crypto transform")
Cc: <stable@vger.kernel.org> # v3.11+
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The ->digest() method of crct10dif-generic reads the current CRC value
from the shash_desc context.  But this value is uninitialized, causing
crypto_shash_digest() to compute the wrong result.  Fix it.

Probably this wasn't noticed before because lib/crc-t10dif.c only uses
crypto_shash_update(), not crypto_shash_digest().  Likewise,
crypto_shash_digest() is not yet tested by the crypto self-tests because
those only test the ahash API which only uses shash init/update/final.

This bug was detected by my patches that improve testmgr to fuzz
algorithms against their generic implementation.

Fixes: 2d31e518 ("crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework")
Cc: <stable@vger.kernel.org> # v3.11+
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/crypto/nx/nx-842.c: In function 'decompress':
drivers/crypto/nx/nx-842.c:356:25: warning: variable 'dpadding' set but not used [-Wunused-but-set-variable]
drivers/crypto/nx/nx-842-pseries.c: In function 'nx842_pseries_compress':
drivers/crypto/nx/nx-842-pseries.c:299:15: warning: variable 'max_sync_size' set but not used [-Wunused-but-set-variable]
drivers/crypto/nx/nx-842-pseries.c: In function 'nx842_pseries_decompress':
drivers/crypto/nx/nx-842-pseries.c:430:15: warning: variable 'max_sync_size' set but not used [-Wunused-but-set-variable]

They are not used any more and can be removed.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Reviewed-by: NMukesh Ojha <mojha@codeaurora.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

'err' is set in err path, but it's not returned to callers.
Don't always return -EINPROGRESS, return err.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Reviewed-by: NMukesh Ojha <mojha@codeaurora.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/crypto/marvell/hash.c: In function 'mv_cesa_ahash_pad_req':
drivers/crypto/marvell/hash.c:138:15: warning: variable 'index' set but not used [-Wunused-but-set-variable]

It's never used and can be removed.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Reviewed-by: NMukesh Ojha <mojha@codeaurora.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use kmemdup rather than duplicating its implementation
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Acked-by: NGary R Hook <gary.hook@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

cacheline_aligned is a special section. It cannot be const at the same
time because it's not read-only. It doesn't give any MMU protection.

Mark it ____cacheline_aligned to not place it in a special section,
but just align it in .rodata

Cc: herbert@gondor.apana.org.au
Suggested-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>