Mark TXQs as having seen transmit while they were stopped if
we bail out of drv_wake_tx_queue() due to reconfig, so that
the queue wake after this will make them catch up. This is
particularly necessary for when TXQs are used for management
packets since those TXQs won't see a lot of traffic that'd
make them catch up later.

Cc: stable@vger.kernel.org
Fixes: 4856bfd2 ("mac80211: do not call driver wake_tx_queue op during reconfig")
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211129152938.4573a221c0e1.I0d1d5daea3089be3fc0dccc92991b0f8c5677f0c@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Currently channel context is updated only after station got an update about
new assoc state, this results in station using the old channel context.

Fix this by moving the update channel context before updating station,
enabling the driver to immediately use the updated channel context in
the new assoc state.
Signed-off-by: NMordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211129152938.1c80c17ffd8a.I94ae31378b363c1182cfdca46c4b7e7165cff984@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Instead of using the hard-coded value of '100' use the correct
scan IEs length as calculated during HW registration to mac80211.
Signed-off-by: NIlan Peer <ilan.peer@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211129152938.0a82d6891719.I8ded1f2e0bccb9e71222c945666bcd86537f2e35@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

We should be doing the HE capabilities lookup based on the full
interface type so if P2P doesn't have HE but client has it doesn't
get confused. Fix that.

Fixes: 2ab45876 ("mac80211: add support for the ADDBA extension element")
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211129152938.010fc1d61137.If3a468145f29d670cb00a693bed559d8290ba693@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Before attempting to parse an extended element, verify that
the extended element ID is present.

Fixes: 41cbb0f5 ("mac80211: add support for HE")
Reported-by: syzbot+59bdff68edce82e393b6@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20211211201023.f30a1b128c07.I5cacc176da94ba316877c6e10fe3ceec8b4dbd7d@changeid
Cc: stable@vger.kernel.org
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The function cfg80211_reg_can_beacon_relax() expects wiphy
mutex to be held when it is being called. However, when
reg_leave_invalid_chans() is called the mutex is not held.
Fix it by acquiring the lock before calling the function.

Fixes: a05829a7 ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: NIlan Peer <ilan.peer@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211202152831.527686cda037.I40ad9372a47cbad53b4aae7b5a6ccc0dc3fddf8b@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

When we call ieee80211_agg_start_txq(), that will in turn call
schedule_and_wake_txq(). Called from ieee80211_stop_tx_ba_cb()
this is done under sta->lock, which leads to certain circular
lock dependencies, as reported by Chris Murphy:
https://lore.kernel.org/r/CAJCQCtSXJ5qA4bqSPY=oLRMbv-irihVvP7A2uGutEbXQVkoNaw@mail.gmail.com

In general, ieee80211_agg_start_txq() is usually not called
with sta->lock held, only in this one place. But it's always
called with sta->ampdu_mlme.mtx held, and that's therefore
clearly sufficient.

Change ieee80211_stop_tx_ba_cb() to also call it without the
sta->lock held, by factoring it out of ieee80211_remove_tid_tx()
(which is only called in this one place).

This breaks the locking chain and makes it less likely that
we'll have similar locking chain problems in the future.

Fixes: ba8c3d6f ("mac80211: add an intermediate software queue implementation")
Reported-by: NChris Murphy <lists@colorremedies.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211202152554.f519884c8784.I555fef8e67d93fff3d9a304886c4a9f8b322e591@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This removes the previously unused reload flag, which was introduced in
1eda9191.
The request is handled as NL80211_REGDOM_SET_BY_CORE, which is parsed
unconditionally.
Reported-by: Nkernel test robot <lkp@intel.com>
Reported-by: NNathan Chancellor <nathan@kernel.org>
Fixes: 1eda9191 ("nl80211: reset regdom when reloading regdb")
Link: https://lore.kernel.org/all/YaZuKYM5bfWe2Urn@archlinux-ax161/Signed-off-by: NFinn Behrens <me@kloenk.de>
Reviewed-by: NNathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/YadvTolO8rQcNCd/@gimli.kloenk.devSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Sending them out on a different queue can cause a race condition where a
number of packets in the queue may be discarded by the receiver, because
the ADDBA request is sent too early.
This affects any driver with software A-MPDU setup which does not allocate
packet seqno in hardware on tx, regardless of whether iTXQ is used or not.
The only driver I've seen that explicitly deals with this issue internally
is mwl8k.

Cc: stable@vger.kernel.org
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20211202124533.80388-1-nbd@nbd.nameSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Reload the regdom when the regulatory db is reloaded.
Otherwise, the user had to change the regulatoy domain
to a different one and then reset it to the correct
one to have a new regulatory db take effect after a
reload.
Signed-off-by: NFinn Behrens <fin@nyantec.com>
Link: https://lore.kernel.org/r/YaIIZfxHgqc/UTA7@gimli.kloenk.dev
[edit commit message]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

As pointed out by Stephen, add the missing docs.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20211129091948.1327ec82beab.Iecc5975406a3028d35c65ff8d2dec31a693888d3@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

The following is from a system that went OOM due to a memory leak:

wlan0: Allocated STA 74:83:c2:64:0b:87
wlan0: Allocated STA 74:83:c2:64:0b:87
wlan0: IBSS finish 74:83:c2:64:0b:87 (---from ieee80211_ibss_add_sta)
wlan0: Adding new IBSS station 74:83:c2:64:0b:87
wlan0: moving STA 74:83:c2:64:0b:87 to state 2
wlan0: moving STA 74:83:c2:64:0b:87 to state 3
wlan0: Inserted STA 74:83:c2:64:0b:87
wlan0: IBSS finish 74:83:c2:64:0b:87 (---from ieee80211_ibss_work)
wlan0: Adding new IBSS station 74:83:c2:64:0b:87
wlan0: moving STA 74:83:c2:64:0b:87 to state 2
wlan0: moving STA 74:83:c2:64:0b:87 to state 3
.
.
wlan0: expiring inactive not authorized STA 74:83:c2:64:0b:87
wlan0: moving STA 74:83:c2:64:0b:87 to state 2
wlan0: moving STA 74:83:c2:64:0b:87 to state 1
wlan0: Removed STA 74:83:c2:64:0b:87
wlan0: Destroyed STA 74:83:c2:64:0b:87

The ieee80211_ibss_finish_sta() is called twice on the same STA from 2
different locations. On the second attempt, the allocated STA is not
destroyed creating a kernel memory leak.

This is happening because sta_info_insert_finish() does not call
sta_info_free() the second time when the STA already exists (returns
-EEXIST). Note that the caller sta_info_insert_rcu() assumes STA is
destroyed upon errors.

Same fix is applied to -ENOMEM.
Signed-off-by: NAhmed Zaki <anzaki@gmail.com>
Link: https://lore.kernel.org/r/20211002145329.3125293-1-anzaki@gmail.com
[change the error path label to use the existing code]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Mesh forwarding requires that the fwd_skb->dev is set up for TX handling,
otherwise the following warning will be generated, so set it up for the
pending frames.

[   72.835674 ] WARNING: CPU: 0 PID: 1193 at __skb_flow_dissect+0x284/0x1298
[   72.842379 ] Modules linked in: ksmbd pppoe ppp_async l2tp_ppp ...
[   72.962020 ] CPU: 0 PID: 1193 Comm: kworker/u5:1 Tainted: P S 5.4.137 #0
[   72.969938 ] Hardware name: MT7622_MT7531 RFB (DT)
[   72.974659 ] Workqueue: napi_workq napi_workfn
[   72.979025 ] pstate: 60000005 (nZCv daif -PAN -UAO)
[   72.983822 ] pc : __skb_flow_dissect+0x284/0x1298
[   72.988444 ] lr : __skb_flow_dissect+0x54/0x1298
[   72.992977 ] sp : ffffffc010c738c0
[   72.996293 ] x29: ffffffc010c738c0 x28: 0000000000000000
[   73.001615 ] x27: 000000000000ffc2 x26: ffffff800c2eb818
[   73.006937 ] x25: ffffffc010a987c8 x24: 00000000000000ce
[   73.012259 ] x23: ffffffc010c73a28 x22: ffffffc010a99c60
[   73.017581 ] x21: 000000000000ffc2 x20: ffffff80094da800
[   73.022903 ] x19: 0000000000000000 x18: 0000000000000014
[   73.028226 ] x17: 00000000084d16af x16: 00000000d1fc0bab
[   73.033548 ] x15: 00000000715f6034 x14: 000000009dbdd301
[   73.038870 ] x13: 00000000ea4dcbc3 x12: 0000000000000040
[   73.044192 ] x11: 000000000eb00ff0 x10: 0000000000000000
[   73.049513 ] x9 : 000000000eb00073 x8 : 0000000000000088
[   73.054834 ] x7 : 0000000000000000 x6 : 0000000000000001
[   73.060155 ] x5 : 0000000000000000 x4 : 0000000000000000
[   73.065476 ] x3 : ffffffc010a98000 x2 : 0000000000000000
[   73.070797 ] x1 : 0000000000000000 x0 : 0000000000000000
[   73.076120 ] Call trace:
[   73.078572 ]  __skb_flow_dissect+0x284/0x1298
[   73.082846 ]  __skb_get_hash+0x7c/0x228
[   73.086629 ]  ieee80211_txq_may_transmit+0x7fc/0x17b8 [mac80211]
[   73.092564 ]  ieee80211_tx_prepare_skb+0x20c/0x268 [mac80211]
[   73.098238 ]  ieee80211_tx_pending+0x144/0x330 [mac80211]
[   73.103560 ]  tasklet_action_common.isra.16+0xb4/0x158
[   73.108618 ]  tasklet_action+0x2c/0x38
[   73.112286 ]  __do_softirq+0x168/0x3b0
[   73.115954 ]  do_softirq.part.15+0x88/0x98
[   73.119969 ]  __local_bh_enable_ip+0xb0/0xb8
[   73.124156 ]  napi_workfn+0x58/0x90
[   73.127565 ]  process_one_work+0x20c/0x478
[   73.131579 ]  worker_thread+0x50/0x4f0
[   73.135249 ]  kthread+0x124/0x128
[   73.138484 ]  ret_from_fork+0x10/0x1c
Signed-off-by: NXing Song <xing.song@mediatek.com>
Tested-By: NFrank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20211123033123.2684-1-xing.song@mediatek.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Some drivers that do their own sequence number allocation (e.g. ath9k) rely
on being able to modify params->ssn on starting tx ampdu sessions.
This was broken by a change that modified it to use sta->tid_seq[tid] instead.

Cc: stable@vger.kernel.org
Fixes: 31d8bb4e ("mac80211: agg-tx: refactor sending addba")
Reported-by: NEneas U de Queiroz <cotequeiroz@gmail.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20211124094024.43222-1-nbd@nbd.nameSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Since retransmission clears info->control, rate control needs to be called
again, otherwise the driver might crash due to invalid rates.

Cc: stable@vger.kernel.org # 5.14+
Reported-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Reported-by: NRobert W <rwbugreport@lost-in-the-void.net>
Fixes: 03c3911d ("mac80211: call ieee80211_tx_h_rate_ctrl() when dequeue")
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Link: https://lore.kernel.org/r/20211122204323.9787-1-nbd@nbd.nameSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

For admission control, obviously all of that only works for
QoS data frames, otherwise we cannot even access the QoS
field in the header.

Syzbot reported (see below) an uninitialized value here due
to a status of a non-QoS nullfunc packet, which isn't even
long enough to contain the QoS header.

Fix this to only do anything for QoS data packets.

Reported-by: syzbot+614e82b88a1a4973e534@syzkaller.appspotmail.com
Fixes: 02219b3a ("mac80211: add WMM admission control support")
Link: https://lore.kernel.org/r/20211122124737.dad29e65902a.Ieb04587afacb27c14e0de93ec1bfbefb238cc2a0@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

sta is NULL for mesh point (resolved later), so sk pacing parameters
were not applied.
Signed-off-by: NMaxime Bizon <mbizon@freebox.fr>
Link: https://lore.kernel.org/r/66f51659416ac35d6b11a313bd3ffe8b8a43dd55.camel@freebox.frSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Jakub Kicinski says:

====================
tls: splice_read fixes

As I work my way to unlocked and zero-copy TLS Rx the obvious bugs
in the splice_read implementation get harder and harder to ignore.
This is to say the fixes here are discovered by code inspection,
I'm not aware of anyone actually using splice_read.
====================

Link: https://lore.kernel.org/r/20211124232557.2039757-1-kuba@kernel.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Previous patch fixes overriding callbacks incorrectly. Triggering
the crash in sendpage_locked would be more spectacular but it's
hard to get to, so take the easier path of proving this is broken
and call getname. We're currently getting IPv4 socket info on an
IPv6 socket.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

We replace proto_ops whenever TLS is configured for RX. But our
replacement also overrides sendpage_locked, which will crash
unless TX is also configured. Similarly we plug both of those
in for TLS_HW (NIC crypto offload) even tho TLS_HW has a completely
different implementation for TX.

Last but not least we always plug in something based on inet_stream_ops
even though a few of the callbacks differ for IPv6 (getname, release,
bind).

Use a callback building method similar to what we do for struct proto.

Fixes: c46234eb ("tls: RX path for ktls")
Fixes: d4ffb02d ("net/tls: enable sk_msg redirect to tls socket egress")
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Add tests for half-received and peeked records.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

recvmsg() will put peek()ed and partially read records onto the rx_list.
splice_read() needs to consult that list otherwise it may miss data.
Align with recvmsg() and also put partially-read records onto rx_list.
tls_sw_advance_skb() is pretty pointless now and will be removed in
net-next.

Fixes: 692d7b5d ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Make sure we correctly reject splicing non-data records.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

We don't support splicing control records. TLS 1.3 changes moved
the record type check into the decrypt if(). The skb may already
be decrypted and still be an alert.

Note that decrypt_skb_update() is idempotent and updates ctx->decrypted
so the if() is pointless.

Reorder the check for decryption errors with the content type check
while touching them. This part is not really a bug, because if
decryption failed in TLS 1.3 content type will be DATA, and for
TLS 1.2 it will be correct. Nevertheless its strange to touch output
before checking if the function has failed.

Fixes: fedf201e ("net: tls: Refactor control message handling on recv")
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Test broken records.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Add helpers for sending and receiving special record types.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

We have the same code 3 times, about to add a fourth copy.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

The issue happened randomly in runtime.  The message "Link is Down" is
popped but soon it recovered to "Link is Up".

The "Link is Down" results from the incorrect read data for reading the
PHY register via MDIO bus.  The correct sequence for reading the data
shall be:
1. fire the command
2. wait for command done (this step was missing)
3. wait for data idle
4. read data from data register

Cc: stable@vger.kernel.org
Fixes: f160e994 ("net: phy: Add mdio-aspeed")
Reviewed-by: NJoel Stanley <joel@jms.id.au>
Signed-off-by: NDylan Hung <dylan_hung@aspeedtech.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20211125024432.15809-1-dylan_hung@aspeedtech.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Oleksandr brought a bug report where netpoll causes trace
messages in the log on igb.

Danielle brought this back up as still occurring, so we'll try
again.

[22038.710800] ------------[ cut here ]------------
[22038.710801] igb_poll+0x0/0x1440 [igb] exceeded budget in poll
[22038.710802] WARNING: CPU: 12 PID: 40362 at net/core/netpoll.c:155 netpoll_poll_dev+0x18a/0x1a0

As Alex suggested, change the driver to return work_done at the
exit of napi_poll, which should be safe to do in this driver
because it is not polling multiple queues in this single napi
context (multiple queues attached to one MSI-X vector). Several
other drivers contain the same simple sequence, so I hope
this will not create new problems.

Fixes: 16eb8815 ("igb: Refactor clean_rx_irq to reduce overhead and improve performance")
Reported-by: NOleksandr Natalenko <oleksandr@natalenko.name>
Reported-by: NDanielle Ratson <danieller@nvidia.com>
Suggested-by: NAlexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NOleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: NDanielle Ratson <danieller@nvidia.com>
Link: https://lore.kernel.org/r/20211123204000.1597971-1-jesse.brandeburg@intel.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Karsten Graul says:

====================
net/smc: fixes 2021-11-24

Patch 1 from DaXing fixes a possible loop in smc_listen().
Patch 2 prevents a NULL pointer dereferencing while iterating
over the lower network devices.
====================

Link: https://lore.kernel.org/r/20211124123238.471429-1-kgraul@linux.ibm.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

The kernel_listen function in smc_listen will fail when all the available
ports are occupied.  At this point smc->clcsock->sk->sk_data_ready has
been changed to smc_clcsock_data_ready.  When we call smc_listen again,
now both smc->clcsock->sk->sk_data_ready and smc->clcsk_data_ready point
to the smc_clcsock_data_ready function.

The smc_clcsock_data_ready() function calls lsmc->clcsk_data_ready which
now points to itself resulting in an infinite loop.

This patch restores smc->clcsock->sk->sk_data_ready with the old value.

Fixes: a60a2b1e ("net/smc: reduce active tcp_listen workers")
Signed-off-by: NGuo DaXing <guodaxing@huawei.com>
Acked-by: NTony Lu <tonylu@linux.alibaba.com>
Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Coverity reports a possible NULL dereferencing problem:

in smc_vlan_by_tcpsk():
6. returned_null: netdev_lower_get_next returns NULL (checked 29 out of 30 times).
7. var_assigned: Assigning: ndev = NULL return value from netdev_lower_get_next.
1623                ndev = (struct net_device *)netdev_lower_get_next(ndev, &lower);
CID 1468509 (#1 of 1): Dereference null return value (NULL_RETURNS)
8. dereference: Dereferencing a pointer that might be NULL ndev when calling is_vlan_dev.
1624                if (is_vlan_dev(ndev)) {

Remove the manual implementation and use netdev_walk_all_lower_dev() to
iterate over the lower devices. While on it remove an obsolete function
parameter comment.

Fixes: cb9d43f6 ("net/smc: determine vlan_id of stacked net_device")
Suggested-by: NJulian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Marek Behún says:

====================
phylink resolve fixes

With information from me and my nagging, Russell has produced two fixes
for phylink, which add code that triggers another phylink_resolve() from
phylink_resolve(), if certain conditions are met:
  interface is being changed
or
  link is down and previous link was up
These are needed because sometimes the PCS callbacks may provide stale
values if link / speed / ...
====================

Link: https://lore.kernel.org/r/20211123154403.32051-1-kabel@kernel.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>

On mv88e6xxx 1G/2.5G PCS, the SerDes register 4.2001.2 has the following
description:
  This register bit indicates when link was lost since the last
  read. For the current link status, read this register
  back-to-back.

Thus to get current link state, we need to read the register twice.

But doing that in the link change interrupt handler would lead to
potentially ignoring link down events, which we really want to avoid.

Thus this needs to be solved in phylink's resolve, by retriggering
another resolve in the event when PCS reports link down and previous
link was up, and by re-reading PCS state if the previous link was down.

The wrong value is read when phylink requests change from sgmii to
2500base-x mode, and link won't come up. This fixes the bug.

Fixes: 9525ae83 ("phylink: add phylink infrastructure")
Signed-off-by: NRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: NMarek Behún <kabel@kernel.org>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

On PHY state change the phylink_resolve() function can read stale
information from the MAC and report incorrect link speed and duplex to
the kernel message log.

Example with a Marvell 88X3310 PHY connected to a SerDes port on Marvell
88E6393X switch:
- PHY driver triggers state change due to PHY interface mode being
  changed from 10gbase-r to 2500base-x due to copper change in speed
  from 10Gbps to 2.5Gbps, but the PHY itself either hasn't yet changed
  its interface to the host, or the interrupt about loss of SerDes link
  hadn't arrived yet (there can be a delay of several milliseconds for
  this), so we still think that the 10gbase-r mode is up
- phylink_resolve()
  - phylink_mac_pcs_get_state()
    - this fills in speed=10g link=up
  - interface mode is updated to 2500base-x but speed is left at 10Gbps
  - phylink_major_config()
    - interface is changed to 2500base-x
  - phylink_link_up()
    - mv88e6xxx_mac_link_up()
      - .port_set_speed_duplex()
        - speed is set to 10Gbps
    - reports "Link is Up - 10Gbps/Full" to dmesg

Afterwards when the interrupt finally arrives for mv88e6xxx, another
resolve is forced in which we get the correct speed from
phylink_mac_pcs_get_state(), but since the interface is not being
changed anymore, we don't call phylink_major_config() but only
phylink_mac_config(), which does not set speed/duplex anymore.

To fix this, we need to force the link down and trigger another resolve
on PHY interface change event.

Fixes: 9525ae83 ("phylink: add phylink infrastructure")
Signed-off-by: NRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: NMarek Behún <kabel@kernel.org>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Usage of phy_ethtool_get_link_ksettings() in the link status change
handler isn't needed, and in combination with the referenced change
it results in a deadlock. Simply remove the call and replace it with
direct access to phydev->speed. The duplex argument of
lan743x_phy_update_flowcontrol() isn't used and can be removed.

Fixes: c10a485c ("phy: phy_ethtool_ksettings_get: Lock the phy for consistency")
Reported-by: NAlessandro B Maurici <abmaurici@gmail.com>
Tested-by: NAlessandro B Maurici <abmaurici@gmail.com>
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/40e27f76-0ba3-dcef-ee32-a78b9df38b0f@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

While testing BIG TCP patch series, I was expecting that TCP_RR workloads
with 80KB requests/answers would send one 80KB TSO packet,
then being received as a single GRO packet.

It turns out this was not happening, and the root cause was that
cubic Hystart ACK train was triggering after a few (2 or 3) rounds of RPC.

Hystart was wrongly setting CWND/SSTHRESH to 30, while my RPC
needed a budget of ~20 segments.

Ideally these TCP_RR flows should not exit slow start.

Cubic Hystart should reset itself at each round, instead of assuming
every TCP flow is a bulk one.

Note that even after this patch, Hystart can still trigger, depending
on scheduling artifacts, but at a higher CWND/SSTHRESH threshold,
keeping optimal TSO packet sizes.

Tested:

ip link set dev eth0 gro_ipv6_max_size 131072 gso_ipv6_max_size 131072
nstat -n; netperf -H ... -t TCP_RR  -l 5  -- -r 80000,80000 -K cubic; nstat|egrep "Ip6InReceives|Hystart|Ip6OutRequests"

Before:

   8605
Ip6InReceives                   87541              0.0
Ip6OutRequests                  129496             0.0
TcpExtTCPHystartTrainDetect     1                  0.0
TcpExtTCPHystartTrainCwnd       30                 0.0

After:

  8760
Ip6InReceives                   88514              0.0
Ip6OutRequests                  87975              0.0

Fixes: ae27e98a ("[TCP] CUBIC v2.3")
Co-developed-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Link: https://lore.kernel.org/r/20211123202535.1843771-1-eric.dumazet@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Update the B53 Ethernet switch section to contain
drivers/net/dsa/bcm_sf2*.
Reported-by: NRussell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Acked-by: NRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20211123222422.3745485-1-f.fainelli@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Merge tag 'ieee802154-for-net-2021-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan

Stefan Schmidt says:

====================
pull-request: ieee802154 for net 2021-11-24

A fix from Alexander which has been brought up various times found by
automated checkers. Make sure values are in u32 range.

* tag 'ieee802154-for-net-2021-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan:
  net: ieee802154: handle iftypes as u32
====================

Link: https://lore.kernel.org/r/20211124150934.3670248-1-stefan@datenfreihafen.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Update NC-SI command handler (both standard and OEM) to take into
account of payload paddings in allocating skb (in case of payload
size is not 32-bit aligned).

The checksum field follows payload field, without taking payload
padding into account can cause checksum being truncated, leading to
dropped packets.

Fixes: fb4ee675 ("net/ncsi: Add NCSI OEM command support")
Signed-off-by: NKumar Thangavel <thangavel.k@hcl.com>
Acked-by: NSamuel Mendoza-Jonas <sam@mendozajonas.com>
Reviewed-by: NPaul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>