__FUNCTION__ hasn't been treated as a string literal since gcc 3.4, so
this only helps people who only test-compile using 3.3 (compiler-gcc3.h
barks at anything older than that).  Besides, there are almost no
occurrences of __FUNCTION__ left in the tree.

[akpm@linux-foundation.org: convert remaining __FUNCTION__ references]
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently the underlay of zpool: zsmalloc/zbud, do not know who creates
them.  There is not a method to let zsmalloc/zbud find which caller they
belong to.

Now we want to add statistics collection in zsmalloc.  We need to name the
debugfs dir for each pool created.  The way suggested by Minchan Kim is to
use a name passed by caller(such as zram) to create the zsmalloc pool.

    /sys/kernel/debug/zsmalloc/zram0

This patch adds an argument `name' to zs_create_pool() and other related
functions.
Signed-off-by: NGanesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

`struct zram' contains both `struct gendisk' and `struct request_queue'.
the latter can be deleted, because zram->disk carries ->queue pointer, and
->queue carries zram pointer:

create_device()
	zram->queue->queuedata = zram
	zram->disk->queue = zram->queue
	zram->disk->private_data = zram

so zram->queue is not needed, we can access all necessary data anyway.
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Admin could reset zram during I/O operation going on so we have used
zram->init_lock as read-side lock in I/O path to prevent sudden zram
meta freeing.

However, the init_lock is really troublesome.  We can't do call
zram_meta_alloc under init_lock due to lockdep splat because
zram_rw_page is one of the function under reclaim path and hold it as
read_lock while other places in process context hold it as write_lock.
So, we have used allocation out of the lock to avoid lockdep warn but
it's not good for readability and fainally, I met another lockdep splat
between init_lock and cpu_hotplug from kmem_cache_destroy during working
zsmalloc compaction.  :(

Yes, the ideal is to remove horrible init_lock of zram in rw path.  This
patch removes it in rw path and instead, add atomic refcount for meta
lifetime management and completion to free meta in process context.
It's important to free meta in process context because some of resource
destruction needs mutex lock, which could be held if we releases the
resource in reclaim context so it's deadlock, again.

As a bonus, we could remove init_done check in rw path because
zram_meta_get will do a role for it, instead.
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Ganesh Mahendran <opensource.ganesh@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

bd_holders is increased only when user open the device file as FMODE_EXCL
so if something opens zram0 as !FMODE_EXCL and request I/O while another
user reset zram0, we can see following warning.

  zram0: detected capacity change from 0 to 64424509440
  Buffer I/O error on dev zram0, logical block 180823, lost async page write
  Buffer I/O error on dev zram0, logical block 180824, lost async page write
  Buffer I/O error on dev zram0, logical block 180825, lost async page write
  Buffer I/O error on dev zram0, logical block 180826, lost async page write
  Buffer I/O error on dev zram0, logical block 180827, lost async page write
  Buffer I/O error on dev zram0, logical block 180828, lost async page write
  Buffer I/O error on dev zram0, logical block 180829, lost async page write
  Buffer I/O error on dev zram0, logical block 180830, lost async page write
  Buffer I/O error on dev zram0, logical block 180831, lost async page write
  Buffer I/O error on dev zram0, logical block 180832, lost async page write
  ------------[ cut here ]------------
  WARNING: CPU: 11 PID: 1996 at fs/block_dev.c:57 __blkdev_put+0x1d7/0x210()
  Modules linked in:
  CPU: 11 PID: 1996 Comm: dd Not tainted 3.19.0-rc6-next-20150202+ #1125
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  Call Trace:
    dump_stack+0x45/0x57
    warn_slowpath_common+0x8a/0xc0
    warn_slowpath_null+0x1a/0x20
    __blkdev_put+0x1d7/0x210
    blkdev_put+0x50/0x130
    blkdev_close+0x25/0x30
    __fput+0xdf/0x1e0
    ____fput+0xe/0x10
    task_work_run+0xa7/0xe0
    do_notify_resume+0x49/0x60
    int_signal+0x12/0x17
  ---[ end trace 274fbbc5664827d2 ]---

The warning comes from bdev_write_node in blkdev_put path.

   static void bdev_write_inode(struct inode *inode)
   {
        spin_lock(&inode->i_lock);
        while (inode->i_state & I_DIRTY) {
                spin_unlock(&inode->i_lock);
                WARN_ON_ONCE(write_inode_now(inode, true)); <========= here.
                spin_lock(&inode->i_lock);
        }
        spin_unlock(&inode->i_lock);
   }

The reason is dd process encounters I/O fails due to sudden block device
disappear so in filemap_check_errors in __writeback_single_inode returns
-EIO.

If we check bd_openers instead of bd_holders, we could address the
problem.  When I see the brd, it already have used it rather than
bd_holders so although I'm not a expert of block layer, it seems to be
better.

I can make following warning with below simple script.  In addition, I
added msleep(2000) below set_capacity(zram->disk, 0) after applying your
patch to make window huge(Kudos to Ganesh!)

script:

   echo $((60<<30)) > /sys/block/zram0/disksize
   setsid dd if=/dev/zero of=/dev/zram0 &
   sleep 1
   setsid echo 1 > /sys/block/zram0/reset
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Ganesh Mahendran <opensource.ganesh@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We need to return set_capacity(disk, 0) from reset_store() back to
zram_reset_device(), a catch by Ganesh Mahendran.  Potentially, we can
race set_capacity() calls from init and reset paths.

The problem is that zram_reset_device() is also getting called from
zram_exit(), which performs operations in misleading reversed order -- we
first create_device() and then init it, while zram_exit() perform
destroy_device() first and then does zram_reset_device().  This is done to
remove sysfs group before we reset device, so we can continue with device
reset/destruction not being raced by sysfs attr write (f.e.  disksize).

Apart from that, destroy_device() releases zram->disk (but we still have
->disk pointer), so we cannot acces zram->disk in later
zram_reset_device() call, which may cause additional errors in the future.

So, this patch rework and cleanup destroy path.

1) remove several unneeded goto labels in zram_init()

2) factor out zram_init() error path and zram_exit() into
   destroy_devices() function, which takes the number of devices to
   destroy as its argument.

3) remove sysfs group in destroy_devices() first, so we can reorder
   operations -- reset device (as expected) goes before disk destroy and
   queue cleanup.  So we can always access ->disk in zram_reset_device().

4) and, finally, return set_capacity() back under ->init_lock.

[akpm@linux-foundation.org: tweak comment]
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: NGanesh Mahendran <opensource.ganesh@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Ganesh Mahendran was the first one who proposed to use bdev->bd_mutex to
avoid ->bd_holders race condition:

        CPU0                            CPU1
umount /* zram->init_done is true */
reset_store()
bdev->bd_holders == 0                   mount
...                                     zram_make_request()
zram_reset_device()

However, his solution required some considerable amount of code movement,
which we can avoid.

Apart from using bdev->bd_mutex in reset_store(), this patch also
simplifies zram_reset_device().

zram_reset_device() has a bool parameter reset_capacity which tells it
whether disk capacity and itself disk should be reset.  There are two
zram_reset_device() callers:

-- zram_exit() passes reset_capacity=false
-- reset_store() passes reset_capacity=true

So we can move reset_capacity-sensitive work out of zram_reset_device()
and perform it unconditionally in reset_store().  This also lets us drop
reset_capacity parameter from zram_reset_device() and pass zram pointer
only.
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: NGanesh Mahendran <opensource.ganesh@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

zram_meta_alloc() and zram_meta_free() are a pair.  In
zram_meta_alloc(), meta table is allocated.  So it it better to free it
in zram_meta_free().
Signed-off-by: NGanesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A trivial cleanup of zram_meta_alloc() error handling.
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A RAID0 array (like a LINEAR array) does not have a concept
of 'size' being the amount of each device that is in use.
Rather, as much of each device as is available is used.
So the 'size' is set to 0 and ignored.

RAID10 does have this concept and needs it to be set correctly.
So when we convert RAID0 to RAID10 we must determine the
'size' (that being the size of the first 'strip_zone' in the
RAID0), and set it correctly.
Reported-and-tested-by: NXiao Ni <xni@redhat.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

This allows those get_user_pages calls to pass FAULT_FLAG_ALLOW_RETRY to
the page fault in order to release the mmap_sem during the I/O.
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Reviewed-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Peter Feiner <pfeiner@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 5695be14 ("OOM, PM: OOM killed task shouldn't escape PM
suspend") has left a race window when OOM killer manages to
note_oom_kill after freeze_processes checks the counter.  The race
window is quite small and really unlikely and partial solution deemed
sufficient at the time of submission.

Tejun wasn't happy about this partial solution though and insisted on a
full solution.  That requires the full OOM and freezer's task freezing
exclusion, though.  This is done by this patch which introduces oom_sem
RW lock and turns oom_killer_disable() into a full OOM barrier.

oom_killer_disabled check is moved from the allocation path to the OOM
level and we take oom_sem for reading for both the check and the whole
OOM invocation.

oom_killer_disable() takes oom_sem for writing so it waits for all
currently running OOM killer invocations.  Then it disable all the further
OOMs by setting oom_killer_disabled and checks for any oom victims.
Victims are counted via mark_tsk_oom_victim resp.  unmark_oom_victim.  The
last victim wakes up all waiters enqueued by oom_killer_disable().
Therefore this function acts as the full OOM barrier.

The page fault path is covered now as well although it was assumed to be
safe before.  As per Tejun, "We used to have freezing points deep in file
system code which may be reacheable from page fault." so it would be
better and more robust to not rely on freezing points here.  Same applies
to the memcg OOM killer.

out_of_memory tells the caller whether the OOM was allowed to trigger and
the callers are supposed to handle the situation.  The page allocation
path simply fails the allocation same as before.  The page fault path will
retry the fault (more on that later) and Sysrq OOM trigger will simply
complain to the log.

Normally there wouldn't be any unfrozen user tasks after
try_to_freeze_tasks so the function will not block. But if there was an
OOM killer racing with try_to_freeze_tasks and the OOM victim didn't
finish yet then we have to wait for it. This should complete in a finite
time, though, because

	- the victim cannot loop in the page fault handler (it would die
	  on the way out from the exception)
	- it cannot loop in the page allocator because all the further
	  allocation would fail and __GFP_NOFAIL allocations are not
	  acceptable at this stage
	- it shouldn't be blocked on any locks held by frozen tasks
	  (try_to_freeze expects lockless context) and kernel threads and
	  work queues are not frozen yet
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Suggested-by: NTejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While touching this area let's convert printk to pr_*.  This also makes
the printing of continuation lines done properly.
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NTejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patchset addresses a race which was described in the changelog for
5695be14 ("OOM, PM: OOM killed task shouldn't escape PM suspend"):

: PM freezer relies on having all tasks frozen by the time devices are
: getting frozen so that no task will touch them while they are getting
: frozen.  But OOM killer is allowed to kill an already frozen task in order
: to handle OOM situtation.  In order to protect from late wake ups OOM
: killer is disabled after all tasks are frozen.  This, however, still keeps
: a window open when a killed task didn't manage to die by the time
: freeze_processes finishes.

The original patch hasn't closed the race window completely because that
would require a more complex solution as it can be seen by this patchset.

The primary motivation was to close the race condition between OOM killer
and PM freezer _completely_.  As Tejun pointed out, even though the race
condition is unlikely the harder it would be to debug weird bugs deep in
the PM freezer when the debugging options are reduced considerably.  I can
only speculate what might happen when a task is still runnable
unexpectedly.

On a plus side and as a side effect the oom enable/disable has a better
(full barrier) semantic without polluting hot paths.

I have tested the series in KVM with 100M RAM:
- many small tasks (20M anon mmap) which are triggering OOM continually
- s2ram which resumes automatically is triggered in a loop
	echo processors > /sys/power/pm_test
	while true
	do
		echo mem > /sys/power/state
		sleep 1s
	done
- simple module which allocates and frees 20M in 8K chunks. If it sees
  freezing(current) then it tries another round of allocation before calling
  try_to_freeze
- debugging messages of PM stages and OOM killer enable/disable/fail added
  and unmark_oom_victim is delayed by 1s after it clears TIF_MEMDIE and before
  it wakes up waiters.
- rebased on top of the current mmotm which means some necessary updates
  in mm/oom_kill.c. mark_tsk_oom_victim is now called under task_lock but
  I think this should be OK because __thaw_task shouldn't interfere with any
  locking down wake_up_process. Oleg?

As expected there are no OOM killed tasks after oom is disabled and
allocations requested by the kernel thread are failing after all the tasks
are frozen and OOM disabled.  I wasn't able to catch a race where
oom_killer_disable would really have to wait but I kinda expected the race
is really unlikely.

[  242.609330] Killed process 2992 (mem_eater) total-vm:24412kB, anon-rss:2164kB, file-rss:4kB
[  243.628071] Unmarking 2992 OOM victim. oom_victims: 1
[  243.636072] (elapsed 2.837 seconds) done.
[  243.641985] Trying to disable OOM killer
[  243.643032] Waiting for concurent OOM victims
[  243.644342] OOM killer disabled
[  243.645447] Freezing remaining freezable tasks ... (elapsed 0.005 seconds) done.
[  243.652983] Suspending console(s) (use no_console_suspend to debug)
[  243.903299] kmem_eater: page allocation failure: order:1, mode:0x204010
[...]
[  243.992600] PM: suspend of devices complete after 336.667 msecs
[  243.993264] PM: late suspend of devices complete after 0.660 msecs
[  243.994713] PM: noirq suspend of devices complete after 1.446 msecs
[  243.994717] ACPI: Preparing to enter system sleep state S3
[  243.994795] PM: Saving platform NVS memory
[  243.994796] Disabling non-boot CPUs ...

The first 2 patches are simple cleanups for OOM.  They should go in
regardless the rest IMO.

Patches 3 and 4 are trivial printk -> pr_info conversion and they should
go in ditto.

The main patch is the last one and I would appreciate acks from Tejun and
Rafael.  I think the OOM part should be OK (except for __thaw_task vs.
task_lock where a look from Oleg would appreciated) but I am not so sure I
haven't screwed anything in the freezer code.  I have found several
surprises there.

This patch (of 5):

This patch is just a preparatory and it doesn't introduce any functional
change.

Note:
I am utterly unhappy about lowmemory killer abusing TIF_MEMDIE just to
wait for the oom victim and to prevent from new killing. This is
just a side effect of the flag. The primary meaning is to give the oom
victim access to the memory reserves and that shouldn't be necessary
here.
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This one was driving me mad, with several lines of warnings during the
allmodconfig build for a single bogus pointer cast.  The warning was so
verbose due to the indirect macro expansion explanation, and the whole
thing was just for a debug printout.

The bogus pointer-to-integer cast was pointless anyway, so just remove
it, and use '%p' to show the pointer.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A DM device must inherit the QUEUE_FLAG_SG_GAPS flags from its
underlying block devices' request queues.

This fixes problems when submitting cloned requests to multipathed
devices requiring virtually contiguous buffers.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Commit 84683a7e ("sata_dwc_460ex: enable COMPILE_TEST for the
driver") enabled this driver for non-ppc460-ex platforms, but it was
then disabled for ARM and ARM64 by commit 2de5a9c0 ("sata_dwc_460ex:
disable compilation on ARM and ARM64") because it's too noisy and
broken.

This disabled is entirely, because it's too noisy on x86-64 too, and
there's no point in disabling architectures one by one.  At a minimum,
the code isn't 64-bit clean, and even on 32-bit it is questionable
whether it makes sense.

Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

One bit in ->vm_flags is unused now!
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Prior to the existance of 64-bit backends using the X86_64 ABI,
frontends used the X86_32 ABI.  These old frontends do not specify the
ABI and when used with a 64-bit backend do not work.

On x86, default to the X86_32 ABI if one is not specified.  Backends
on ARM continue to default to their NATIVE ABI.
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Acked-by: NRoger Pau Monné <roger.pau@citrix.com>

Current migration code uses blk_put_request in order to finish a request
before requeuing it. This function doesn't update the statistics of the
queue, which completely screws accounting. Use blk_end_request_all instead
which properly updates the statistics of the queue.
Signed-off-by: NRoger Pau Monné <roger.pau@citrix.com>
Reported-and-Tested-by: NOuyang Zhaowei (Charles) <ouyangzhaowei@huawei.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: xen-devel@lists.xenproject.org

As already demonstrated with PCI [1] and the platform bus [2], a
driver_override property in sysfs can be used to bypass the id
matching of a device to a AMBA driver. This can be used by VFIO to
bind to any AMBA device requested by the user.

[1] http://lists-archives.com/linux-kernel/28030441-pci-introduce-new-device-binding-path-using-pci_dev-driver_override.html
[2] https://www.redhat.com/archives/libvir-list/2014-April/msg00382.htmlSigned-off-by: NAntonios Motakis <a.motakis@virtualopensystems.com>
Reviewed-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch fixes indentation issue and error found in argument
reported by static analysis.  Without this patch, sparse and other
static analysis errors will be found.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Reported-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'pci/host-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into acpi-resources

modified:   drivers/of/of_pci.c

This fixes a build failure after merging the 'acpi-resources' branch
with the PCI tree caused by bad interactions between that branch and
the only commit in 'pci/host-generic'.  Also that commit contains a
bug which can be fixed by removing one line of code, so do that too.

Link: http://marc.info/?l=linux-kernel&m=142344882101429&w=2
Link: http://marc.info/?l=linux-next&m=142346304003932&w=2Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The vunmap() function performs also input parameter validation.
Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Acked-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support to get option/expansion rom version flashed in the adapter via
ethtool getdrvinfo function.
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver exposes interfaces that directly relate to HW state. Upon fatal
error, consumers of these interfaces (ULPs) that rely on completion of
all their posted work-request could hang, thereby introducing dependencies
in shutdown order.  To prevent this from happening, we manage the
relevant resources (CQs, QPs) that are used by the device. Upon a fatal error,
we now generate simulated completions for outstanding WQEs that were not
completed at the time the HW was reset.

It includes invoking the completion event handler for all involved CQs so that
the ULPs will poll those CQs. When polled we return simulated CQEs with
IB_WC_WR_FLUSH_ERR return code enabling ULPs to clean up their resources and
not wait forever for completions upon receiving remove_one.

The above change requires an extra check in the data path to make sure that when
device is in error state, the simulated CQEs will be returned and no further
WQEs will be posted.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When attaching a QP to a multicast address in bonded mode, there was an
assumption that the port of the QP must be #1. This assumption isn't the
case under the flow which enables maximal usage of the physical ports.

Fix it by always checking the port of the original flow and create the
mirrored flow on the other port.

Fixes: c6215745 ('IB/mlx4: Load balance ports in port aggregation mode')
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When queuing work to send the NETDEV_BONDING_INFO netdev event, it's
possible that when the work is executed, the pointer to the slave
becomes invalid. This can happen if between queuing the event and the
execution of the work, the net-device was un-ensvaled and re-enslaved.

Fix that by queuing a work with the data of the slave instead of the
slave structure.

Fixes: 69e61133 ('net/bonding: Notify state change on slaves')
Reported-by: NNikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There was a bad typo in commit 43759d4f ("random: use an improved
fast_mix() function") and I didn't notice because it "looked right", so
I saw what I expected to see when I reviewed it.

Only months later did I look and notice it's not the Threefish-inspired
mix function that I had designed and optimized.

Mea Culpa.  Each input bit still has a chance to affect each output bit,
and the fast pool is spilled *long* before it fills, so it's not a total
disaster, but it's definitely not the intended great improvement.

I'm still working on finding better rotation constants.  These are good
enough, but since it's unrolled twice, it's possible to get better
mixing for free by using eight different constants rather than repeating
the same four.
Signed-off-by: NGeorge Spelvin <linux@horizon.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org  # v3.16+
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The vfree() function performs input parameter validation.
Thus the NULL pointer test around vfree() calls is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Currently the cleanup of all error cases are open-coded.  Introduce a
common exit path and labels.
Signed-off-by: NJohannes Thumshirn <morbidrsa@gmail.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

The thin-pool target doesn't display the data block size as part of
its table status, unlike the dm-cache target, so there is no need for
dm_pool_get_data_block_size().

This was found using cppcheck.
Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

dm_table_put() was replaced by dm_put_live_table().
Signed-off-by: NJunxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Update the obsolete url in the CONFIG_DM_CRYPT help text.
Signed-off-by: NLoic Pefferkorn <loic@loicp.eu>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

To be future-proof and for better readability the time comparison
is modified to use time_after_eq() instead of plain, error-prone math.
Signed-off-by: NAsaf Vertz <asaf.vertz@tandemg.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

To be future-proof and for better readability the time comparisons are modified
to use time_in_range() and time_after() instead of plain, error-prone math.
Signed-off-by: NManuel Schölling <manuel.schoelling@gmx.de>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

My static checker complains that if "num_raid_params" is UINT_MAX then
the "if (num_raid_params + 1 > argc) {" check doesn't work as intended.

The other change is that I moved the "if (argc != (num_raid_devs * 2))"
condition forward a few lines so it was before the call to
context_alloc().  If we had an integer overflow inside that function
then it would lead to an immediate crash.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Otherwise replacing the multipath target with the error target fails:
  device-mapper: ioctl: can't change device type after initial table load.

The error target was mistakenly considered to be target type
DM_TYPE_REQUEST_BASED rather than DM_TYPE_MQ_REQUEST_BASED even if the
target it was to replace was of type DM_TYPE_MQ_REQUEST_BASED.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

For blk-mq request-based DM the responsibility of allocating a cloned
request is transfered from DM core to the target type.  Doing so
enables the cloned request to be allocated from the appropriate
blk-mq request_queue's pool (only the DM target, e.g. multipath, can
know which block device to send a given cloned request to).

Care was taken to preserve compatibility with old-style block request
completion that requires request-based DM _not_ acquire the clone
request's queue lock in the completion path.  As such, there are now 2
different request-based DM target_type interfaces:
1) the original .map_rq() interface will continue to be used for
   non-blk-mq devices -- the preallocated clone request is passed in
   from DM core.
2) a new .clone_and_map_rq() and .release_clone_rq() will be used for
   blk-mq devices -- blk_get_request() and blk_put_request() are used
   respectively from these hooks.

dm_table_set_type() was updated to detect if the request-based target is
being stacked on blk-mq devices, if so DM_TYPE_MQ_REQUEST_BASED is set.
DM core disallows switching the DM table's type after it is set.  This
means that there is no mixing of non-blk-mq and blk-mq devices within
the same request-based DM table.

[This patch was started by Keith and later heavily modified by Mike]
Tested-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

For blk-mq request-based DM the responsibility of allocating a cloned
request will be transfered from DM core to the target type.

To prepare for conditionally using this new model the original
request's 'special' now points to the dm_rq_target_io because the
clone is allocated later in the block layer rather than in DM core.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>