When the napi api was changed to separate its 1:1 binding to the net_device
struct, the netif_rx_[prep|schedule|complete] api failed to remove the now
vestigual net_device structure parameter.  This patch cleans up that api by
properly removing it..
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Under heavy traffic, there is a small windows when an APBVT entry is
not yet removed and a new connection is established.  Packets for the
new connection are dropped until APBVT entry is removed.  This patch
will forward the packets instead of dropping them.
Signed-off-by: NFaisal Latif <faisal.latif@intel.com>
Signed-off-by: NChien Tung <chien.tin.tung@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

error_module is 5 bits wide not 4.  The corresponding crit_error_count
array is correct with 32 entries.
Signed-off-by: NChien Tung <ctung@neteffect.com>
--
 drivers/infiniband/hw/nes/nes_hw.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Change management of perfect filter table to allow enhanced
performance applications.
Signed-off-by: NVadim Makhervaks <vmakhervaks@neteffect.com>
Signed-off-by: NSweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: NChien Tung <ctung@neteffect.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Handle async error NES_AEQE_AEID_AMP_BOUNDS_VIOLATION.
Signed-off-by: NFaisal Latif <flatif@neteffect.com>
Signed-off-by: NSweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: NChien Tung <ctung@neteffect.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Mask off a critical error after 100 critical error interrupts to
keep the system "sane".
Signed-off-by: NSweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: NChien Tung <ctung@neteffect.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Use timer value set via ethtool intead of #defines.
Signed-off-by: NJohn Lacombe <jlacombe@neteffect.com>
Signed-off-by: NSweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: NChien Tung <ctung@neteffect.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: NBob Sharp <bsharp@neteffect.com>
Signed-off-by: NSweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: NChien Tung <ctung@neteffect.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Clear MDC bits before setting them to a new value.  Adjust MDC value
for 10G.
Signed-off-by: NSweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: NChien Tung <ctung@neteffect.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Add a module parameter wqm_quanta.  It controls the number of segments
transmitted at a time.
Signed-off-by: NSweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: NChien Tung <ctung@neteffect.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Add support for NetEffect 4 port 1G HP blade card.  The mapping
between physical port and MAC is different from the standup card.
Signed-off-by: NChien Tung <ctung@neteffect.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Major rework of CM connection setup/teardown.  We had a number of issues
with MPI applications not starting/terminating properly over time.
With these changes we were able to run longer on larger clusters.

* Remove memory allocation from nes_connect() and nes_cm_connect().
* Fix mini_cm_dec_refcnt_listen() when destroying listener.
* Remove unnecessary code from schedule_nes_timer() and nes_cm_timer_tick().
* Functionalize mini_cm_recv_pkt() and process_packet().
* Clean up cm_node->ref_count usage.
* Reuse skbs if available.
Signed-off-by: NFaisal Latif <flatif@neteffect.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

- Change the IB_DEVICE_ZERO_STAG flag to the transport-neutral name
  IB_DEVICE_LOCAL_DMA_LKEY, which is used by iWARP RNICs to indicate 0
  STag support and IB HCAs to indicate reserved L_Key support.

- Add a u32 local_dma_lkey member to struct ib_device.  Drivers fill
  this in with the appropriate local DMA L_Key (if they support it).

- Fix up the drivers using this flag.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Every caller of nes_post_cqp_request() passed it NES_CQP_REQUEST_RING_DOORBELL,
so just remove that parameter and always ring the doorbell.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Acked-by: NFaisal Latif <flatif@neteffect.com>

The iw_nes driver repeats the logic

	if (atomic_dec_and_test(&cqp_request->refcount)) {
		if (cqp_request->dynamic) {
			kfree(cqp_request);
		} else {
			spin_lock_irqsave(&nesdev->cqp.lock, flags);
			list_add_tail(&cqp_request->list, &nesdev->cqp_avail_reqs);
			spin_unlock_irqrestore(&nesdev->cqp.lock, flags);
		}
	}

over and over.  Wrap this up in functions nes_free_cqp_request() and
nes_put_cqp_request() to simplify such code.

In addition to making the source smaller and more readable, this shrinks
the compiled code quite a bit:

add/remove: 2/0 grow/shrink: 0/13 up/down: 164/-1692 (-1528)
function                                     old     new   delta
nes_free_cqp_request                           -     147    +147
nes_put_cqp_request                            -      17     +17
nes_modify_qp                               2316    2293     -23
nes_hw_modify_qp                             737     657     -80
nes_dereg_mr                                 945     860     -85
flush_wqes                                   501     416     -85
nes_manage_apbvt                             648     560     -88
nes_reg_mr                                  1117    1026     -91
nes_cqp_ce_handler                           927     769    -158
nes_alloc_mw                                1052     884    -168
nes_create_qp                               5314    5141    -173
nes_alloc_fmr                               2212    2035    -177
nes_destroy_cq                              1097     918    -179
nes_create_cq                               2787    2598    -189
nes_dealloc_mw                               762     566    -196
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Acked-by: NFaisal Latif <flatif@neteffect.com>

Fix some bugs with the max_aggr module parameter added with LRO support:

 - The module parameter value ignored and not actually used to set
   lro_mgr.max_aggr.
 - MODULE_PARM_DESC had a typo "_mro_" instead of "_lro_" so it didn't
   end up describing the actual module parameter.
 - The nes_lro_max_aggr variable was declared as unsigned, but the
   module_param line said "int" instead of "uint" for the type.
 - The default value for the parameter was stuck in the permissions
   field of module_param, which led to nonsensical permissions for the
   file under /sys/module/iw_nes/param.
 - The parameter was used in only one file but defined in another, which
   led to the variable being global for no good reason.  Move everything
   related to the parameter to the file nes_hw.c where it is actually
   used.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Various cleanups:
	- Change // to /* .. */
	- Place whitespace around binary operators.
	- Trim down a few long lines.
	- Some minor alignment formatting for better readability.
	- Remove some silly tabs.
Signed-off-by: NGlenn Streiff <gstreiff@neteffect.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

This patch enables the iw_nes module for NetEffect RNICs to support
additional PHYs including SFP+ (referred to as ARGUS in the code).
Signed-off-by: NEric Schneider <eric.schneider@neteffect.com>
Signed-off-by: NGlenn Streiff <gstreiff@neteffect.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: Faisal Latif <flatif@neteffect.com.
Signed-off-by: NGlenn Streiff <gstreiff@neteffect.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

After PXE boot, the iw_nes driver does a full reset to ensure the card
is in a clean state.  However, it doesn't wait for firmware to
complete its work before issuing a port reset to enable the ports,
which leads to problems bringing up the ports.

The solution is to wait for firmware to complete its work before
proceeding with port reset.

This bug was flagged by Roland Dreier <rolandd@cisco.com>.

Cc: <stable@kernel.org>
Signed-off-by: NChien Tung <ctung@neteffect.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Add a new IB_WR_SEND_WITH_INV send opcode that can be used to mark a
"send with invalidate" work request as defined in the iWARP verbs and
the InfiniBand base memory management extensions.  Also put "imm_data"
and a new "invalidate_rkey" member in a new "ex" union in struct
ib_send_wr. The invalidate_rkey member can be used to pass in an
R_Key/STag to be invalidated.  Add this new union to struct
ib_uverbs_send_wr.  Add code to copy the invalidate_rkey field in
ib_uverbs_post_send().

Fix up low-level drivers to deal with the change to struct ib_send_wr,
and just remove the imm_data initialization from net/sunrpc/xprtrdma/,
since that code never does any send with immediate operations.

Also, move the existing IB_DEVICE_SEND_W_INV flag to a new bit, since
the iWARP drivers currently in the tree set the bit.  The amso1100
driver at least will silently fail to honor the IB_SEND_INVALIDATE bit
if passed in as part of userspace send requests (since it does not
implement kernel bypass work request queueing).  Remove the flag from
all existing drivers that set it until we know which ones are OK.

The values chosen for the new flag is not consecutive to avoid clashing
with flags defined in the XRC patches, which are not merged yet but
which are already in use and are likely to be merged soon.

This resurrects a patch sent long ago by Mikkel Hagen <mhagen@iol.unh.edu>.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

__FUNCTION__ is gcc-specific, use __func__ instead.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Avoid namespace pollution and allow the compiler to optimize better.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Interrupt moderation low threshold value was incorrectly triggering,
indicating that the threshold should be lowered.

The impact was the timer was likely to become 40usecs and get stuck
there.  The biggest side effect was too many interrupts and nonoptimal
performance.
Signed-off-by: NJohn Lacombe <jlacombe@neteffect.com>
Signed-off-by: NGlenn Streiff <gstreiff@neteffect.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Add a standard NIC and RDMA/iWARP driver for NetEffect 1/10Gb ethernet adapters.
Signed-off-by: NGlenn Streiff <gstreiff@neteffect.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>